InDesign CC: Numbering not updated chapters

Similar Questions

• ESXi - 4.1 version numbers not updated after patches/updates

  I applied about 3 patches and an update, everything went successfully, and he stated that she needed to reboot for it to finish. After restarting each time it always shows the number of the original version of 3 patches ago. Why is it not update the version number? How can I verify that this is install patches? Thank you.

  you use the below zip file?

  https://hostupdate.VMware.com/software/VUM/offline/release-317-20111024-147750/update-from-esxi4.1-4.1_update02.zip

  Of

  http://www.VMware.com/downloadpatches

  In addition, a good blog post

  http://communities.VMware.com/people/vmroyale/blog/2010/12/27/single-use-vihostupdate-how-to-for-ESXi-4x

• Why not update placed pictures not updated?

  We work in a busy environment pre - meadows where we update the content in indesign documents.

  We found in indesign CS4 after positioned update content, as the Indesign file is not updating (although the link info indicates the correct modification date and time). At the moment the only way to overcome this problem is to delete the file updated, then re place it again! (then it seems OK).

  Example:

  We have several brands of paint implemented in Illustrator (CS4). They have elements of base on the bottom layer (IE; Logos, texts and references) that are in the same position on each label. Then we have a stack of other layers for the change of the variety elemants (IE; Red layer, blue, green layer etc) - that have code numbers and codes to bars on them.

  Step 1: Back up illustrator with red layer doc lit.

  Step 2: Place the illustrator in Indesign doc - then export to PDF.

  Step 3: Check the exported PDF in Acrobat = Yes, it seems!

  Step 4: Open the doc of Illustrator (the same in step 1) turn off the Red layer and turn on the blue layer.

  Step 5: Update the image to the rhythm of the Idesign document (Yes, it's the same indesign doc, we recorded in step 2)

  Step 6: The link information area contains a time of change update - new export updated the PDF file.

  Step 7: Check the PDF in Acrobat = it looks the same as in step 3. (ie; the layer red not blue!)

  Now I have to redo a series of 20 tags at a time 1 becauce all PDFs that I exported all the same air!

  Help us, please?

  Just update the object layer options in InDesign. All of this back and forth to Illy is a waste of time.

  Bob

• numbers of drive and beaches not updated in the Finder?

  Hello

  I recently found a hard drive I hd lost and there a lot of music that I have imported CD years ago.

  I have added to my iTunes library and noticed that there is lack of follow-up and disk numbers.

  I've been correcting these and while everything in iTunes is the correct order, good number of files in the Finder do not show the disc and track numbers.

  It's not a big deal, but I would like to know why this is happening.

  There is nothing wrong with the pieces of music and tried to restart, duplication and re-import after change of track and disk number.

  Concerning

  In iTunes > Preferences > advanced there are two options, keep... and copy... I think at least one of them is turned off the coast, maybe both. The other made sure that everything you add to the library is copied to the folder media, the first updates the file name and the path of what is in the press kit in response to changes in metadata. Unless you have good reason not to do it, then I would recommend allowing these two options and the consolidation of your media in the designated iTunes Media folder. Note that the titles in .wav format are not tags. These will lose information deleted and re-imported. It is also possible to create without tag mp3 files or mp3 files with several tags that iTunes could not update properly.

  TT2

• InDesign 2015 CC will not update

  I read a few threads recent re: problems with the last update InDesign 2015 CC but none are quite the same as my question.

  I am running OS X El Capitan, version 10.11.6 on an iMac. I was able to update Illustrator CC 2015.3 this morning without problem, and all other CC applications that I have installed are up-to-date and it seem to work OK.

  When I tried to run CC updates of Adobe Application Manager this morning, I've updated Illustrator without problem, as I said. But InDesign had finished its update. After a few minutes of progress, he found himself at 99%. I closed all other and just waited, but it would not solve or complete the update. I waited about 30 minutes.

  I leave the Application Manager and restarted my machine, tried again, the same result.

  I hunted around on boards for solutions and those, including the verification of the permissions of preferences (they write), tried to rename the 1.0 file, etc. None of this has helped.

  I uninstalled (running uninstaller in the InDesign application folder) and reinstalled in the Application Manager, choosing to save preferences. Again the installer stopped at 99% and stayed there for more than 20 minutes.

  I uninstalled again and reinstalled again, this time, allowing preferences should be deleted. Once again the installer stopped at 99% for 20 minutes and counting.

  I get no error messages, a failure just to complete the updates.

  Thanks for any advice.

  Hi Michael,

  This type of installation failures / crashes occurs generally if you have problems with the network.

  If you use a wireless connection, we recommend to use a patch cable.

  Please try again. If you still experience the problem, we have a session connect with you to help solve.

  Concerning

  Nathalie

• I got creative cloud, InDesign now says the trial has expired and I have to buy the program. It seems that it does not update I already have a plan. How can I do to?

  I got creative cloud, InDesign now says the trial has expired and I have to buy the program. It seems that it does not update I already have a plan. How can I do to?
  If I pay for a product that I can't use.

  Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC

• Photoshop, Illustrator and InDesign does not update instead, I "Start free Trail ' and 'Buy now', when I have the license for all 3. What should I do?

  Photoshop, Illustrator and InDesign does not update instead, I "Start free Trail ' and 'Buy now', when I have the license for all 3. What should I do?

  Hey Geri,

  Please check the help below document:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Kind regards

  Sheena

• Can not update InDesign CC of 9.0 to 9.1

  I tried to reinstall InDesign CC several times, but I can't update 9.0 to 9.1. My problem is that the option Update does not appear. I tried through help > Panel updates in InDesign, but also the creative cloud application. All say that the app is "up-to-date", but it's a lie! It says 9.0 when I watch the news.

  When I uninstall InDesign CC and creative cloud app and reinstall I get a notice that it there IS an update, but when I click it, I get an error and it won't download. Then CC app restarts and the update has disappeared.

  WHAT SHOULD I DO? I spent hours to download and uninstalling and reinstalling.

  > Was WHAT DYP wrote:

  > "If you can download this update (ID 9.1) from the Adobe website, why not remember where or provide a direct link. ''

  Do not worry, there are InDesign CC 9.1 update of direct links to the download and installation (for Windows or Mac).

• Figure numbers not in service - cannot be changed

  Hello

  I use FrameMaker 9 in Windows XP Professional, Version 2002, Service Pack 2.

  I inherited a FM document in the form of instructions that accompanies the third party technology that my company farmed.

  When I opened this document (built in FM 8), numbers (format X - X) have been completely out of use.

  Figures 5-1 to 5-4 are in order, but then the following figure shows the Figure 5-1, followed by the Figure 5-6, followed by the Figure 5-5.

  I'm not a user of FrameMaker itself; I'm more at home with PageMaker and InDesign, but it is a tool of choice for this document and I'm stuck with it.

  How can I get the numbers in the right order? Be clear and precise; I am not versed in lexicon FM. Thank you for your attention.

  -WPH

  The entries that you look in the document itself, or they are in a file separated as a list of numbers generated?

  If you speak a separate file of the list of Figures, out of sequence entries are almost always caused by some of the titles figure (but not all) being located inside a table or an anchored frame.

  The entries out of the sequence is because the chassis built lists in a certain predefined sequence: it looks at the flow of the main text of the document first, then looks at the text inside tables, then looks like the text in anchor text blocks (I may last two out of sequence, but in any case it is the reason).

  If it's the digit real numbering in the chapters, the problem is probably due to a problem with the installation of the chapter numbering. Place the cursor in the paragraph tag Figure. Open the paragraph Designer (use Ctrl-m), then look at the Dial tab which is the 4th icon from the left.  What is listed for the building blocks of automatic numbering?

  Sheila

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• iTunes does not update the podcast... why?

  So my podcast, ' Onstage/Offstage', has been very well on iTunes for three years. All of a sudden it will not update new episodes, new graphics and text changes. I checked my file rss.xml several times and it seems very well as usual.

  URL: https://itunes.apple.com/us/podcast/onstage-offstage/id955994429?mt=2

  Any ideas? Explanations? Need help. Thank you!

  You have introduced a mistake in your stream, so what happens the voids. Please refer to the report Feedvalidator for line numbers:

  Line 20 reads

  You have not closed this tag, so that all of the following tags "item" seem to be inside the previous tag, like the final of the tag ' / channel '. It should read

• Engine mark action do not update?

  This driving force is part of a larger test. I call it every 15 minutes to test the stabilisation of the temperature (four consecutive readings at intervals of 15 minutes in the three degrees)

  It seems to work in what concerns the detection of stabilization, but I do not understand why digital table indicators is not updating.

  If you run this by got and fill the numbers in the table of working temperatures control all indicators.

  But when it's a subvi all indicators remain grayed out or in their initialized when State I open it while it is running.

  I even brought the table Stab with a pious terminal, it might be updated each time the subvi ran, but it is not.

  What happens here?

  I think that, sometimes, LV will not refresh the indicators on the panels that are closed both the VI is executed, even if the data are processed and transmitted properly.  It is an optimization to avoid things that make no difference (in this case do not update indicators which cannot see).

  If you run your main VI for awhile then open FP AE, you see the initial state of the public Service, until the main calls the AE again.  Have you watched long enough to see if it is what is happening?

  Lynn

• Code 80072EFE ALSO IT ME LEAVES DO NOT updated EVEN IN TROUBLESHOOTING

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Code 80072EFE ALSO IT ME LEAVES DO NOT updated EVEN IN TROUBLESHOOTING

  surtina,

  http://support.Microsoft.com/kb/555375

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been... How long this update problem occurred?

  What is the suite of security/antivirus installed and is a 3rd party firewall used?

  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates http://support.microsoft.com/kb/836941

  By running the Fixit on this page, you can reset the Windows Update components. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset Windows Update http://support.microsoft.com/kb/971058 components

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7 http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• My computer not updated

  My computer is updated automatically every day, but it has not updated at all for the past year.  When I check the updates, a message appears that says "failed" and when I look to see the list of things that try to update, they all say "failed."  When it seaches updates, a code appears which says "error" with a group of numbers after him.  Because of the computer is unable to update, I'm no longer able to print or open all Microsoft programs, such as Word or Exel.  When I try to open these programs, he told me that not to upgrade the computer could affect the stability of the computer and that I would need to go to Windows Update to install the new updates.  When I open Windows Update, it says I must first install an update from Windows Update.  I clicked on 'Install now' and he tries to install, but then just goes back to the original page.

  The other night I went online to see what I could do about it.  Several Internet sites said that the problem is most likely in the catroot2 folder and change the name of this catroot2old folder could solve the problem.  I tried this and it would allow me to change the name.  Now I don't know what else to do.  Help, please!

  When it seaches updates, a code appears which says "error" with a group of numbers after him.

  And what are the error messages and lots of numbers after each error message?

  Please also inform what your operating system is including service pack level and whether or not you have scanned for virus/malware etc.

  A year is a long time to go without updating.

  For info how to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation common problems
  http://support.Microsoft.com/kb/906602

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  TaurArian [MVP] 2005-2010 - Update Services

• Recent items in Vista does not update correctly

  I have a problem that the recent items on the Start Menu is not updated correctly.  There are a few documents out there, but there are many who don't are not who should be.  If I right click on the recent items and choose explore I can see a lot more files in the C:\Users\Pete\AppData\Roaming\Microsoft\Windows\Recent folder.

  For example, there are few. XLS and. DOC files that I opened recently but don't are not.  However when I explore the folder I can see a shortcut to the directory that contains the missing files.

  I tried many combinations of physically erase the folder, by activating / disabling the option elements recent etc, but nothing helped.

  Thanks in advance

  I had the same problem. I fixed it by deleting all entries, except the default entry, in HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\RecentDocs in the registry. There are a bunch of other entries which are numbered for each of the files in the list of recent items. and the entrance to MRUListEx. Delete it all. Unfortunately, there is no file name but only entered, HEX numbers and letters. After doing this, Windows has started listing the files in recent Articles that were not show up there before.

  I found that the problem has followed a couple of files that were present in recent Articles when I cleared the list a few weeks earlier. After these files are not present in recent items, but rather the shortcut to the folder appears. Also, I've found that the problem was with the actual files, not the folder. I opened the 2 files, Excel, and a Word document and choose Save under and added a 2 to name the document, save an exact copy of the documents. Each copy has appeared in recent and open items without any problems. Copies of rename the original name and overwrite the originals, reduced the problem. I searched the registry files to see if there's information about save them in a special place, but nothing found. They were only listed in the MRUlists for each of their applications, showing other open documents recently Excel and Word.

  Since I had made changes to the documents and saved the changes in copies that end in 2, I chose save as once again and replaced the original files with updated copies. Now my original files, with the update of information, see and open from the list of recent items.