characters to appear on scanned documents

Similar Questions

• LaserJet M5035 MFP: I have a purple line which appears in the scanned document

  Hello

  When sending e-mail through the printer scanner, I have a purple line which appears in the scanned document. Scanning is done from the "feeder ' ' the printer and not the glass.

  The windows were all cleaned.

  I did the test and digital printing of the "feeder ' ' and I have no lines for printing!   I did update the firmware of the printer and I still have the same result.

  You have a solution to this problem?

  Thank you

  

  The small windows of the charger scanner had a small red above mark.  When the analysis has been done and sent on an e-mail, the line shows as it is scanned were made with the color scan option.  If I print the line doesn't show because the printer is not color!

• HP C6280 All in One Printer: unable to save the scanned document of multi page as on the single Document using the Preview on IMAC computer

  I recently reinstalled my drivers on my IMAC computer to correct some strange characters appearing when printing from Microsoft word via Parallels.  The relocation at this time and the time has fixed this problem.  My most recent issue is not able to save a scanned document of multi page into a document using an excerpt?  In the latest that I had to do was high brightness, scanned documents to be saved and presto, all were saved under one.  Now you have to go save each of them at a time.  If you have a 5-page document, you need to go through the registration process 5 separate time create several documents, which is a big waste of time.  I have also my C6280 DPL 100 size should be a problem, I think.  To correct even any help would be greatly appreciated.

  RG.

  Hi @RGrantB3,

  Welcome to the HP Forums! I'd love to help you analyze documents several pages in a single file. When you scan, you select PDF as the format scanning? When you select the PDF file, you should see an option to select, save all pages in a single file, or a variant of this option.

  If you do not see this, please post a screenshot of you scanning settings for I can visually identify the issue.

  How to take a screenshot on a Mac.         How to post a picture on the HP Forum s.

  I can't wait to hear back on your part. If this resolves the issue, please click Accept as Solution button below so that others can see what has worked for you. Thank you.

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• scanned document not to transfer on the desktop after put 10.11.2 updated

  HP Officejet Pro 8610 scanner can be controlled by OS X but scanned document does not appear on the desktop as shown on the details page.

  Update.  File can be found in "All My Files" but it's not the location that was requested on the scanning.

• Scanned documents will not go into an office on mac OS 10.6.7

  When scanning using the document on my C7250 feeder, scanned documents are not going to the requested area. (desktop, file documents, etc..) After the digitization of the image appears in the scan menu and a message appears that it has no paper loaded. This happens even if I uncheck create unique document.

  CCMC

  I thought about it. You cannot use a / in the description on the menu scan. If you use one / scan disappears. Take the / out and it will on request.

• a signature can disappear from a scanned document when send you it?

  I sent a scanned document from my computer which contained my signature and the date it was sent.  People of office says he came unsigned.  Is it possible to have the signature disappear from the emailing document comes from my computer to theirs?

  Continuous thread:

  Thank you, it was sent as an image.

  I scanned the document as an image, so I'm told and lie?

  If the document has been scanned as an image and sent as such so the signature should be there and you just sent the wrong file.

  If the document has been converted to PDF by the OCR scanner program then the signature may have been left as an image embedded in the PDF file. In this case, it is possible to distance the image of the signature does not appear on their PDF reader.

  Scan the document signed as an image and recheck the attachment before you send it. If they can see the image, they can see your signature, because the two will be part and parcel of the same thing.

• The network file scanned Documents (PDF or JPG) = 0 (OfficeJet Pro 8500 has 910 bytes

  I have OfficeJet Pro 8500 910 has connected to the wired network with domain

  I created a shared network folder with read access to my computer (operating system windows 8 Pro X 64) through IP address of printer

  http://10.181.XX.xxx

  The shared folder has appeared on the screen officeJet and test with success, when I wear analysis on the officejet, the digitized file appeared on the network folder but with of size 0 bytes and does not open even it is pdf or jpg

  I have same door on the other computer is windows 7 PRo X 64 spouse for the same field and scanned documents open succefuly.

  Help, please

  My problem was solved by updating the HP 8500 has the latest firmware

  Thanks for trying to help me

• HP3545: How to scan document of several pages in a SINGLE PDF file

  Hello
  I recently bought HP3545 AIO printer. I am not able to scan document of several pages in a SINGLE PDF file.
  Help, please.
  ... Reddij

  Hello Reddij,

  Welcome to the HP Forums!

  I understand that you are unable to scan multiple documents in a single file. I'll do my best to help you and to solve this problem. First of all, I need to know what your operating system on your computer? Click here to discover: Windows or Mac?

  I would recommend performing this step of your computer, the HP software. It is much easier to achieve. Please follow this document HP How to digitize. Click on your appropriate operating system, and then click "how to scan multiple pages into a single file. You will notice indicates: (digitization of additional pages is supported at 300 dpi or less.)

  1. Place a document on the scanner glass, and then click Scan your computer.
  2. When the preview scan appears, click the Plus sign ( ) on the left side of the window to scan additional pages. If you do not use an ADF, you must load the next page of the document on the glass of the scanner to add to each additional page.

  I would like to know how your progress. Impatience on your part.

• Fail to scan documents to a PDF on my Mac

  I HP8600 N911a for a few years now, but today I have tryied to scan documents in PDF format on my mac and the only thing that it displays in the preview of the scan screen is the Word failed. I do not understand why, cause when I try to scan to the JPEG Format, it works perfectly fine.

  Thanks for providing this information xenia123.

  I connect the printer directly to the Mac with a USB cable and try to scan a PDF document.

  In this way, we find out if it's a software issue or issue a networking.

  If it scans by a USB connection, the software is installed correctly.

  Mac OS X includes a personal firewall that can be used to block unwanted incoming connections on your computer. A firewall protects the services on your computer from other computers on networks or on the Internet.

  1. choose the Apple menu > System Preferences, click Security, and then firewall.

  1. 

Open the Firewall pane of security preferences
  2. Click the lock icon to unlock it and enter an administrator name and password.
  3. Click Start to activate the firewall.
  4. Temporarily disable the firewall.

  If you are able to scan with the firewall off, then proceed as follows to allow specified applications and services to connect:

  1. In the same window of firewall, click Advanced.
  2. Click the Add (+) button and select the application or service in the dialog box that appears.
  3. Select the application that is used to scan and check the option to automatically allow signed software...

  If you cannot parse the PDF file with a USB connection, then I uninstall and reinstall the printer software.

  I have provided a document to make sure that the Scan of the computer is turned on. Go to Solution 2: check the Scan of the computer definition please. A "connection error" or 'No computer detected' error message when scanning for e-all-in-one printer series HP Officejet Pro 8600 (N911).

  If you need help, let me know.

  Good day!
  Thank you.

• Scanning documents problem

  I have problems with scanning documents on my f2480 printer HP Deskject.

  I can't scan multiple pages of a document at the same time. When I finished a scan page, the printer immediately gives me the prompt to mark imported files and there is no option to continue scanning several pages of a document. This means that I have some separate files for each page of a document.

  In addition, I don't have the option to save a file in PDF format.

  When I go to open the file, it appears in a kind of tool of visualization of photos.

  It's as if the printer is locked in mode of scanning photos.

  Kate, do you have solution for this printer Center? There is a way to allow .pdf analyses as well as the combined windows, but all two of these things are accessible through the interface of your computer.

  I would recommend to use the HP scanner software to scan from the comptuter and in the scan window, you will be able to choose both save in a .pdf file and under "Advanced" options select analyze in a single document.

  Let me know if it helps!

• Where's my scanned document?

  I downloaded both documents scanned from my laptop.  They appear on my computer, (devices with removable storage) when it is connected to my laptop as Tif files, but I can't find them on my pre phone when I log out of my laptop.

  I converted the tif files to JPEG and tried again.  Scanned documents are now in my photos; but as long as I can remember where they are, it will be fine.  Thanks for your help.

• Scan fax w7 64 how to fax a scanned document

  I am able to fax using option NEW FAX (modem, etc. is configured correctly)...

  Now I want to fax a SCANNED document. I tried the following:

  .

  1 the document scanned...

  2. his appears in my image file... I rename to doc1

  3. I find the doc1

  4. I click on NEW FAX and enter phone num, subject, cover of information page and click SEND

  5 - the fax is sent but only the front page (my DOC1 is not sent)

  What I am doing wrong?

  Thank you

  You don't mention the part where you attach the document to the fax to send. This could be a problem... :-)

• OfficeJet Pro 8600: Officejet Pro 8600 won't save scanned document

  I've updated to Mac OS Sierra 10.12 and I can't save a document scanned from my office. It scans the document ok, but the "Save" button is grayed out.

  I can scan and record directly from the parser.

  There is no driver listed on the HP website for 10.12 - the latest driver listed is of 10.1

  Anyone know how to fix?

  I have a MacBook, which is still under El Capitan and it works very well as my Mac did until I updated the operating system. I also note that Sierra is not on the list of OS for this post.

  Update on my problem - I discovered I can save the scanned document using the Print - command, function.

  So I guess this will fix itself when HP to produce a new printer driver for this OS.

• Cannot open the scanned document

  I use an officejet 8600 +.  I can't open the documents that have been scanned in PDF format.

  Hello

  Each of them or just one or two? Please scan 1 page (for test) computer and select document , and then open the scanned document.  You may need to update Adobe reader as mentioned on the following assistance:

  http://helpx.Adobe.com/Acrobat/KB/cant-open-PDF.html

  Kind regards.