Chassis

Similar Questions

• Mac pro chassis/body

  Hi all, someone could tell me what cases/chassis are compatible with a mac pro Desktop 5.1 2010. I am after a substitute for this case and do not know if all chassis are identical. see you soon

  The Mac Pro 4.1 5.1 of aluminum, 2009, 2010 or 2010 boxes are identical or almost.

  Older models 2.1 1.1 and 3.1 from 2006 to 2008 are different on the inside.

  the similar PowerMac 5G is completely different on the inside.

• Error 512 - fan chassis rear not detected

  Hello

  Just unpacked my birthday gift today... a brand new and shiny, HP Pavilion HPE-595uk (yay!).  My husband purchased directly from HP, about 3 weeks ago.  It has been used until today.  (Happy birthday, me!)

  However, on first switching on, I received a message from bios:-"512 - undetected, rear chassis fan error press F1 to continue"

  I pressed F1 and start continued, Windows 7 is installed, everything seems ok... I'm talking about (entered) to you on the PC right now.  However... If I have to powercycle the PC, I get the error (error 512 - rear, chassis fan not detected, press F1) every time.

  That means there is a problem with this PC? The rear chassis fan should be detected?  If a cable is loose?  All new PC remember... just out the box 2 hours.

  Thanks for the inforfmation.  I just started my new computer that has the message 'Error 512 - rear chassis fan not detected'.  Rear fan connector had a bent pin and the connector has been sitting on it.  Pushing the stem with long nose pliers and a small screwdriver it fixed and enabled the connector to connect all the way and everything is fine.  Be sure to remove the power cord from the back before you do.  I did not, and the button was hit during the removal of the side panel.  Since I was a SDS I heard the computer turn on - I was lucky is not to run out of something!

• undetected 512-rear chassis fan

  Hi all

  Today, I replaced a new cpu fan.
  and the new, a work very well, but it is a problem, if I turned on my pc, I got a message from bios, this:error 512 - undetected rear chassis fan).
  If I press F1 my pc will work normally and I see my windows 8

  can someone help me please?

  IHAVE: -.
  Windows 8
  hddr2 7168 mb of RAM
  1 GB graphics card
  convertible minitour of product name: hp compaq dc7800p
  sysem bios 786f1 v01.32
  Processor: processor intel (R) core (tm) 2 cpu 6400 2.13GHz

  HP support is very bad!

  I don't have any help from this support, because I fixed it!

  Thanks for nothing!

• Cracked chassis of the Satellite R630-138

  Hello everyone, I'm living in the United Kingdom and I have trouble finding someone who can solve my laptop. They said is impossible find the chassis. Any suggestions where I can find it? Thanks for the replies

  If you know the part number, you can check eBay.
  A Toshiba ASP may be able to locate one.

• Satellite Pro U300 Expansion Chassis problem

  Hello fellow users.

  I am trying to use an expresscard with my satellite pro expansion chassis. Problem is that in Device Manager, I am getting error code 12 for PCI bridges in the chassis and the error code 31 for the PCI bridge on the card I want to use in the expansion chassis.

  I installed latest version of the BIOS but cannot solve the problem.

  Slot for Express card in my computer is fine because I use an Ethernet Express of 1 card G without problem.

  Hunting on the web, it seems that the problem is related to the BIOS being unable to handle the number of PCI bus in the system, refer to the knowledge base article 942959 Microsoft. This article explains the problem and how to Vista and W2008 reslove.

  I am running XP and work around, that they said, does not work. Upgrading to Vista is not really an option as software I want to use is not yet the version for Vista.

  My only options left at this stage are fresh install XP to see if it corrects the problem, or vista fresh install and hope I want to use drivers/software works under Vista.

  Has anyone else seen this problem, got any other suggestions.

  Thank you very much

  Hello

  your problem is unusual, but what I want to know is: which model / manufacturer, what is this expansion chassis?
  It would be interesting since without knowing what we´re talking expansion chassis, it would be difficult to know where exactly the problem could be...

  Greetings

• ProDesk 400 MT of G1: New MOBO - invalid chassis serial number and no activation

  ProDesk 400 G 1 MT

  Windows 8 was the orignal operating system

  Recently updated for Windows 10

  Question: Replaced mobo moose that crashed.

  Original HP mobo crashed.  Replaced by superior version 2.0 than the 1.2 that it came with, but same manufacturer.

  Getting two errors:

  1. at boot up -: incorrect serial number of chassis

  2. Windows 10 boots and works very well - did not need to reinstall the o/s - but does not activate Windows 10

  Solutions?  Is there a way to solve this problem without reinstallation?   Something in the BIOS/EUFI requiring an update?

  Thank you

  Darryl

  I hope this helps.

  Desktops HP Business - how to fix a no electronic serial number valid in the BIOS

  Product key Windows 10 is connected to the motherboard, you must contact Microsoft Activation Support @ (888) 571-2048

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• NB550D: speakers do not seem to be attached to the chassis

  I just got one of these today and I am impressed overall so far, with the exception of a single thig. Stakeholders do not seem to be anchored on the chassis. If I press the palmrest on each side, they collide (machine completely off). Or even strong typing are the speakers rattle away. A gentle shake of the case, open or closed will cause a rattle. Is this normal? Everything I read praised the quality of the construction of this machine, but it seems just cheap feeling. Any other observations of the owners would be appreciated. IM posting here because the thread must therefore, with speaker problems.

  Thank you very much!

  Hey Buddy,

  To me that sounds like a HARD drive problem too, it seems that the HARD drive makes mechanical noises.

  But even that would be the speakers that you need professional help from an authorized service provider to swap parts. Guys can make an accurate diagnosis and to exchange the part. This is covered by the warranty, so it will cost you nothing.

  List of all FSA you can find here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite M50-159: where to buy a new chassis?

  Hello

  I just found out that on my computer (M50-159) chassis is cracked, the left side is also a bit loose so that when I press on the inside there is movement and a squeaky sound. Is there a place where I can buy or get this replaced for the new chassis?

  Thank you
  Oliver

  Yes, all devices, parts, etc. you can order from the service guy in your country.
  I bought a player that is compatible for my satellite of the authorized service provider.
  He told me that they have to order it from the Toshiba.

  So I think you can also order a chassis and a few blankets for your laptop,

• Open the chassis

  Good day people.

  Recently, I had some problems with my computor (a Compaq CQ5352SC), where it crashes whenever I play a game (many of these games are prior to 2005, is not that they are demanding, since I played several post-2010 Games smoothly on this subject) or watching a DVD movie. Me and some friends believe this may be due to overheating, and after watching with a walk by torchlight through the air vents, I noticed that it is in fact extremely dusty inside. I have had for a few years and have not yet open and out the dust.

  So my question to the forum is the following: How can I open the chassis, so I can get out dust? The last time I have experienced one of the fans almost fell of his support, and I want to avoid such accidents. If necessary, I could post some pics.

  Hello:

  Here is the link to the guide of upgrade and maintenance of your PC:

  http://h10032.www1.HP.com/CTG/manual/c01835707.PDF

• Satellite A210-16F - part number for the chassis need HARD drive

  Hello

  does anyone know what what is the * part number of hard drive for toshiba satellite A210-F16 chassis *.

  The model number is * PSAELE-01S009G3 *.
  I had a frame of HARD drive with a V00927210 part number that does not match this pattern.
  If anyone knows of a reference number or if it can display an image, at least, I would be very gratefull!

  Thank you!

  Hello

  I put t know what HARD drive chassis you re meaning precisely because the HARD drive in my A210 notebook can not find in any media
  It s just connected to the connectors in the HARD drive Bay.

  Anyway, if you need a few laptop parts (not looking at this as part it is) then I recommend you contact the ASP (certified partner) in your country in order to get a part for the Satellite A210 laptop model.

  See you soon

• Pacilion g119dx 17: 17-g119dx Pavilion chassis disassemble problem

  Having a serious problem with disassembly.  Have check the user guide followed all instructions make sure that all screws are out.  Corners correctly pressures from all sides.  Hoever it seems ot at least 2 points of fixation, located towards the arriere-moyen area, approximately in the region in the '5' and '9' around the keyboard key areas.

  I did a little glances to see if I can visually see the exact points, but will not force to break these focal points.

  Absolutely no screws even in the field... period.  The keyboard is not removable on top.  Is it possible screws under one of the keys on the keyboard, I need to draw these neeny to uncscrew these connection points?

  It is a technical design absolutely horrible by HP.  This is done to do nothing more to upgrade the RAM, which has two memory slots and one is empty (I can see, but cannot get to it without being able to remove the bottom of the chassis).

  I searched the internet for a soltion and even called HP "adapter tech", which had no idea (big surprise).

  Any help to solve this will be greatly appreciated!  I already spent hours trying to find a resolution, without success.

  TIA!

  Remove 2 screws under an oval lid plastic on the bottom... worked for my 17-g120nr.

• Picture in picture book uses white between photos and filling when using "Adapt to the chassis" instead of the border color of page like in iPhoto

  I used the book of images to create a book in iPhoto several times because the line between the pictures and the filling when I use 'Adapt to the chassis', is the same color as the color chosen for the borders of homepage and text boxes.  It is seamless.

  I just tried to use the book of images in pictures but the line between the pictures and the fill to 'Adapt to the chassis' is white, and not same color I chose for the page border.  It is, therefore, very ugly.

  Is it possible to remedy this situation?

  first get a glimpse of your p = book - Preview a print project in Photos, iPhoto or Aperture to avoid problems - Apple Support - so you can see exactly what will be printed

  You cannot change how the program works so if the problem persists in the overview say Apple about the bug - http://www.apple.com/feedback/photos.html

  LN

• Get the network on Lenovo x 240 M5 node link in a chassis with 2 EN4093R IOM 8721HC1 IBM

  So I put to update the BMC firmware to support the M5s. The IMM all works very well. I have an CN4054S adapter that I have disabled the multi-channel mode and all ports except port 0 in the IMM node. 1 IOM works for other nodes of era of M4 in the chassis with 2 port emulex adapters. I want to only 10 Gbit ethernet - there is no network convergence going on. I'm not really sure how to determine which port should be on the IOM, but all the ports are enabled. We try to use VLAN1. The NETWORK card has no configuration of VLAN. The IMM shows the physical port out of service. Any ideas that I do get the coming port?

  Hi, jmp242.

  I am happy to know that your system has become well.

  After the change of mode of nic (toggle multichannel), configuration change reflect after restarting the system. so I think that your action is correct.

  Thank you.

• Differences of chassis RS140 - 70F3 and 70F9

  I'm looking for someone who is familiar with two different chassis of RS140 - the 70F3 is supposed to be for 2.5 HDD and 70F9 chassis is for 3.5 HARD drive.

  I bought a system that had no HARD drive and was supposed to be for 2.5 HDD from TigerDirect ". But I have a 70F9 for 3.5 HARD disk model. Given that I finally had time to leave the server box. First thing I noticed is without support of the HARD drive. Then I read online that you do not get media HARD drive unless you buy the discs.

  So since I passed the point of being able to send again, can the disc media HARD 2,5 go into the chassis of the 70F9? Or are the different chassis. I've seen pictures of each server, but I can't tell.

  Also I think that the p/n for drives TOUGH 2.5 support Lenovo's 00FC 519.

  Can someone expand on that?

  Thanks in advance!

  Randy

  Thanks, but I ended up using double-sided tape and installed in the bottom of the chassis. This works because I will not have to worry about going out them, except if a broken. I put in the drive in the laptop 2.5' tray Assembly and used a Ribbon double face in this way that the band don't ruin label on the hard drive.

  Randy

• Update Bios Z400 - now "fan chassis before error 513 not found' I don't have a front Chassis Fan!

  This machine of LOVE and just build one for the gills - power of 600 watts (oem) recently added as well

  Has made updating the BIOS and now it is stuck at the start with 'chassis before 513 error not detected fan' - I can F1 passed and everything is good, but of course I need a fix for this.

  This device does not have a front chassis fan.

  I'm a NEWBIE here and would certainly appreciate some entries.

  Thank you

  David

  Not a windows experience rating bad, huh?

  Such as already reported here, over, do a search for "Ghetto Mod.  There are two main positions for this of me, one for the xw6400 and another for the xw4600.  Your case best fits the xw4600 case, but there is more information about Noctua in the xw6400 post.

  Read both... the answers are all there.