Check if the page is displayed in the printer friendly mode

Similar Questions

• Error "check out the printed put, put printed on may be printed incorrectly.

  When I printed this time I got error "check out the printed put, put printed on can be printed incorrectly" when I test print this time only paper to jump, no printing ink on paper & I mentioned error came also. I have reinstalleddriver & printer spooler is restarted, cable also only checked no problems found but repeat same mistake. PSL help me more early like! possible, can you help me to find what parts of the printer is damage or nuisance os?... Please help me

  Hello Vishnu,

  You can try to follow the below link to check if the common issues with printer are the reason for the error message.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Otherwise, feel free to brief us back for assistance.

  Thank you

• How to check if the printer works.

  They gave me printet 720C en with empty cartridges. I connected the printer. But when I try to print nothing happens. Not at least the paper to go so I can see if the printer works? I do not like to spend money for the ink and then discover the printer does not work.

  VDV

  OK, some are progressing.  The Red blinking light may indicate a number of things, but printing will not happen in this case.  I would start by clean cartrdige contacts, as shown here.

  If that does not solve the problem then see the page here.

  There is not low on ink or another indicator for the Deskjet 720 that could prevent printing (or at least going through the motions) with a cartridge empty.  The printer does an electric test of cartridges before printing to that there are no problems might damage the printer control electronics.  The printer will also check and make sure that the cartridges are installed, this model cannot work without both cartridges.

• Cannot print from HP J4680 printer wireless. When I open the troubleshooter, it designates the printer as copy 3.

  Original title: How can I delete copy 3 of my printer wireless?

  I have Windows 7 Home Premium 64 - bit and a HP J4680 printer wireless.  I have problems printing anything.  When I open the device in the Panel, it is called HPFD6327 (HP Officejet J4680).  However, when I open the troubleshooter, it refers to the printer as copy 3.  I tried to delete copy 3, but he begins to turn upwards and is also one of the choices when I click on 'Print' an application.  When I send a print file, it goes to the print queue of the printer, but prints never.  I updated the printer HP, uninstalled and reinstalled the printer drivers, cleared out of the queue, turned the printer off tension-and-many times and restarted the computer.  I can still print it.  I believe that this issue has been raised already, but so far nothing has worked.

  Hi Eurotex,

  1 have. What problem you tried?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest all the steps mentioned in the article and check if it works.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  Method 2: you can try to resolve directly to the printer.

  a. Please click on 'Start', type 'Printers' (without the quotes) and click the displayed item in the results of research.

  b. right-click on the active printer, then click 'Properties'.

  c. an option named "print directly to the printer. Usually, this option can be found on the page 'Advanced Options'. However, this can vary depending on the printer.

  Please open Notepad or Word and check if the printer works correctly now.

  You can see the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  Method 3:  Disable advanced printing features and check if the problem persists. You can undo changes if you want to later.

  a. click the Start button and click on devices and printers.

  b. right-click on the printer and select Properties.

  (c) on the Advanced tab. Remove the check mark from Advanced printing features.

  d. click OK.

   

  Let us know if that helps.

• HP Deskjet 2540: The printer does not work.

  My printer does not print the page, I am sinking.  Instead it tries to download a page that I tried to download a few days ago and he has yet to recognize the page.  It was an image of the Liberty Bell, so I assumed it was copyrighted and would allow me to print and I rejected the page.  Apparently he is stuck somewhere in the printer and it does not load and therefore does not allow me to print the page that I need now.  How can I get this thing off my storage or my printer?  I watched everything I know to review and check in the printer itself.  I do not know how to remove the application printing the page because I can't find in the computer anywhere.

  If you can help me, I would be very grateful

  Thank you

  Linda Schwartz

  Hi @lindaschwartz,

  Thank you for joining the HP Forums!

  I noticed your post on how you can not print with your printer HP Deskjet 2540. I'm happy to help you!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will solve your problem!

• "The printer is off-line" error when printing on Pixma 800 pix

  Original title: impression of the pix on Pixma800

  Print but the photos aren't. The error message is:

  The printer is offline.
  Check that the printer cable is connected and the printer is on.

  Hey guelphelf,

  Follow the two following methods to solve this problem.

  Method 1: Set printer online

  If the printer is offline, an error message appears and the print job will not end. So the value of the printer online by following the suggestions in the article below.

  Setting the printer online (Windows)

  http://support-SG.Canon-Asia.com/contents/SG/en/8200483700.html

  Method 2: Configure the driver to correct the printer port

   

  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.

  a. from the Windows desktop, open the printer properties window.

  b. click the Ports tab.

  c. below "Printing on the following ports" section, select the port to which your printer is connected.

  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  See how it goes.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart HP 7520; How to start the print spooler inorder to connect the printer to the PC?

  Tried to update and received the error 1722: Windows Print Spooler Service has not started.  Checked the spooler that is set as automatic.  Cannot find drivers that update the WIFi connection so that I can print from Windows 7.  Am not able to print from the PC that is connected via WIFi.  Checked and the printer is connected via WiFi.  There are several automatic updates on my machine _ y at - it a mismatch to the printer, a HP Photosmart 7520 recently bought.  When the printer was originally installed, the print command worked until recently!  When I reinstall the printer software, I can't connect it to the Pc via a router.  I unplugged and rstarted the router and I tried to install a new printer.  This has not solved the problem that the 1722 error message reappears.

  Hi Howard,.

  I see that you get the 1722 error when trying to print. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. don't you make changes to the computer before the show?

  I suggest you try to run the printer Troubleshooter and check.
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Also take a look at these articles that might help you.

  Install a printer: http://windows.microsoft.com/is-IS/windows7/Install-a-printer

  Printing to the correct printer: http://windows.microsoft.com/en-US/windows7/Printing-to-the-correct-printer

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Print a test page: http://windows.microsoft.com/en-US/windows7/Print-a-test-page

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• various error messages - cannot get old matrix printer that works with xp for the printer in windows 7

  I have a new pc with windows 7 - I have an old panasonic kxp 3696 PARALLEL port printer that works fine with xp - I bought a decoder directional bi to convert the port PARALLEL to the usb port and is connected to my lenovo m81 - computer came with pre installed epson fx series 1 136 driver in the Inbox (this is the driver of windows 7 recommended by panasonic for this printer)-I managed to print a test page and something of Word-, I then downloaded our accounting software and added an hp printer - in the process, I removed the usb connection and later reinstalled anbother port - since then I could not print all documents or bills - I uninstalled and reinstalled the printer - I deleted and created ports - initially the docs crammed into a queue for printing - I then changed the setting to print online and print test page new - now I send documents to print and they do not appear in the print queue - it seems to be multiple of the printer on the computer copies when I reinstall - also get a message that is not network printer (the printer is connected by usb) and another message00? 0000? etc.

  I used the printer add - local port - function and then create a new port that I called epson - someone can talk me through the process in detail.

  specifically what port should I use (local or create new)? I used the port usb - is that correct?

  If I print a test page? I would be able to print documents?

  If I get epson 1 and exemplary epson 2 - has actually deleted the printer driver?

  Please note I have contacted panasonic who can't stand the printer-I called epson that does not support the old drivers and lenovo that says it's a software problem talk to microsoft.

  We also run windows 7 64 bit in xp for the printer mode if so? How?

  Hello

  I suggest you to uninstall the printer drivers and then use the driver file that you want to install by using the procedure - below

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file that you have on the computer, and then click OK. Now, check if the printer is correctly installed.

  I hope this helps.

• slow down the printing/copying

  I have a Deskjet F4180 all-in-one printer. A few days ago (4/5), he went into a "snail" printing mode. I tried to print something on mapquest when I noticed this. Everything since then has been mega slow. I tried to copy it and he did the same thing, slow. I uninstalled the printer and rebooted but still get the same results. It prints but takes more than an hour to print a 3 page document. You can help me solve this please. It was working fine before that.

  Hello

  1 hour to print 3 pages? Indeed, it is very slow. Try the following:

  -Check if the print quality is set to best Mode. If so, bring it back to normal or project

  -Do a print head cleaning. The option must be in the Panel menu before or from the HP software

• MacBook Air no longer recognizes the printer wireless Epson WF-7620

  It worked well always. Recently, my MacBook Air (I have two with the same problem), the Ipad and the Iphone can not recognize the printer Epson WF - 7620 Airprint wireless.

  This medication is properly updated, and wifi is okay.

  If I connect it by USB, it works correctly.

  Thank you

  Check if the printer needs a firmware update

• laptop to connect wirelessly with the printer new router is installed cannot be obtained

  the printer is a hp3050A J611

  Hello

  1. What operating system work?
  2. What exactly happens when you try to connect to wireless printer? You get the error message?
  3. What is the brand and model of the router?

  Try to connect the printer directly to the computer and see if that helps.

  Try adding Assistant printer on the laptop and check if the printer can be added. Consult the mentioned below to the links for the same thing.

  Install a printer

  Install a printer on a home network

  Please come back with more information so that we can help you better.

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After paper jam, rolls making noises and the printer takes a long time to spit the copy.

  It is an all in one Officejet Pro 8600 and is still under warranty. How can I get fixed roller?

  Wow!  I found the video on how to find a paper jam!    It was a step that was not included on the instructions of the machines, i.e. check behind the print cartridge and the whereabouts of my paper jam!   When everything has failed, read the instructions, eh?

  Thank you!  My problem is solved!

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• Error message-""could not be achieved. " "The print spooler service is not running.

  Can anyone help. Whenever I try to print, I get a message that I need to add a printer, even if I have a printer installed. When I click Yes I Mindprint an another error box saying 'operation could not be performed. The print spooler service is not running"could someone advise how to solve this.

  Thanks in advance

  Matt

  Hello

  ·        Have you tried the steps that are listed in the article manually and see if the problem is resolved?

  ·        Who is the manufacturer of the printer and what is the model?

  ·        When did you get the error message when you try to install the printer or when you try to print?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to check if the Printer Spooler service is started.

  a. Click Start and click Run.

  b. type services.msc in the box run.

  c. find the print spooler service and right click on it.

  d. click Properties and verify that the startup type is set to automatic.

  Method 2:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  C:\Windows\System32\Spool\Printers

  C:\Windows\System32\Spool\Drivers\w32x86

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.