Check the required Network Configuration...

Similar Questions

• How can I remove the HP Network Configuration utility

  I am P2Ving some HP machines and reading the posts here on how to remove most of the HP components, but I'm stuck on how to get rid of the HP Network Configuration utility program that puts the HP Network icon in the system tray.  There is a post of Guillermo Musumeci in 2007 that said using this command:

  SNetCfg.exe - v u cq_cpqteam

  to do it, but I can not find snetcfg.exe on this server.

  There is also a post of Jasemccarty in 2007 that said this keymay be the key to remove:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\

  {4D36E975-E325-11CE-BFC1-08002BE10318}\{FD0FF0D6-4876-4894-9274-258564E35C07}

  But this key does not appear in the registry on that server.  Anyone has any ideas on how to remove the last piece of a P2V-centric software HP had VM?

  Anyone know why HP makes breath difficult to remove their drivers and other components?

  Thank you

  Dan

  Open the properties of your network card (either will do)

  Go - properties and click the HP tool and select "Uninstall".

  See also http://ctxadmtools.musumeci.com.ar/HPPSPCleaner/HPPSPCleanerDownload.html for a tool to strip all HP components for you - I use it regularly after P2Vs.

• How can I create a "print" button that will check the required fields before printing?

  I have a form that is almost ready to be published. There are a few required fields to fill out. I have a Setup button print and check the required fields using this JavaScript:

  var emptyFields = [];

  for (var i = 0; i < this.numFields; i ++) {}

  var f = this.getField (this.getNthFieldName (i));

  If (f.type! = "button" & & f.required ") {}

  If ((f.type=="text" & & f.value== "") |) (f.type=="checkbox" & & f.value=="Off")) emptyFields.push (f.name);

  }

  }

  If (emptyFields.length > 0) {}

  App.Alert ("error! ("You must fill in the following fields: \n" + emptyFields.join ("\n"));

  }

  Its form current you can click on the button and the required fields, the error message, but it still shows the form. Is there to allow printing not until all required fields are filled? I work in Adobe Acrobat X Pro.

  Thank you!

  In the end, use this:

  If {(emptyFields.length>0)}

  App.Alert ("error! ("You must fill in the following fields: \n" + emptyFields.join ("\n"));

  } {This}

  This.Print ();

  }

• books on the oracle network configuration?

  Salvation;
  
  I'm looking for books about the oracle network configuration details. I tried oracle press, O'Reillys, Amazon and google; However, I only found books specific to oracle net that bear a date entirely. It seems that General database management books have chapters on the configuration of the network, however.
  
  At the configuration of the network under oracle 10 g + arrived at the point where the comprehensive books on the subject are not worth the cost?
  
  I was hoping to find information on the syntax of different files, which can go in the and how to solve problems of connectivity - preferably in a place so much when I'm faced with a problem, I don't have to go hunting for more information. This and he is studying a whole lot easier.
  
  Any info is greatly appreciated.
  
  Thank you.
  
  Doug O'Leary

  Just go through this

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14196/network001.htm#sthref174

  http://download.Oracle.com/docs/CD/B19306_01/network.102/b14212/TOC.htm

  Published by: CKPT on July 19, 2010 19:58

• HA installation failure due to a misconfiguration in the host network configuration?

  We have no setup problem on a cluster HA containing 2 ESX 4.0 host. However, after adding a host ESXi 4.1 and configuration HA to contain all 3 hosts, HA shows failure due to a misconfiguration in the network configuration for the ESXi 4.1 host host.
  
  Remembering this bad spell names network could cause a failure of HA configuration, we proceed to rename network management Service Console host ESXi 4.1 in order to match the network management of the ESX 4.0. However, this does not.
  
  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  crescendas wrote:

  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  Hello

  Yes, you can mix ESXi and ESX on this same cluster

  1. Check your DNS - should resolve to long and short names of all nodes in a cluster that you
  2. are the new ESXi in the same IP subnet as the older ESX servers?
  3. try to disable and enable HA
  4. Check below link
     http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1001596&sliceId=1&docTypeID=DT_KB_1_1&dialogID=213574287&StateID=0%200%20213576136

  Good luck

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• After you move a crowd is to Cluster HA, got a misconfiguration in the host network configuration

  An existing host works well in the datacenter, which only had a NIC card. But he moved to Cluster HA, got

  HA configuration

  10.1.1.203

  Unable to complete the configuration of the

  HA agent on the host computer. See the details of the task

  For more information. Incorrect configuration

  in the configuration of the host network.

  Incorrect configuration

  in the configuration of the host network.

  It takes longer for HA NIC card? But, on the procedure for creating HA, not this requirements.

  Thank you!

  George

  Looking at your screenshots I would suggest that you create the second and third vSwitch with 192 and 172 port groups that exist on the other host.

  André

• problems opening program. said the service is currently unavailable. Try later or check the connections networki. I have windows 7. I am connected with everything else. I have phontshop elements 10. bought new.

  I spoke with a number of people. (cats). Why when I try to open 10 items that I installed, it says "service is currently unavailable.  Try more later or check the network connections.

  I have connections on all the rest. It is new, has never been used. bought at Office Depot.  I can't save my numbers if I can't connect.

  Thank you

  Nancy

  See if the suggestions in this link to help you:

  Log, activation, or connection errors. CS5.5 and later, CC, DC Acrobat

  Kind regards

  Guinot

• the change network configuration, now what?

  Hello

  I had a great Setup and everything was moving along smoothly.  decided to do?  I decided to make a major change to the architecture of network. and now everything is broken.  Well not everything but my vms that are sitting on my Berry to emc celerra storage is no longer accessible.

  We previously had a stack of core switches. in order to introduce another layer of reduandancy, we decided to split the nucleus in two basic switches separate battery.  After all, except on my celerra virtual machines are still humming. I can't put my finger on what may be the cause.  Ive checked the physical connectivity is not a problem, as have run pings and that all withdrew.  If anyone can provide insight that it would be greatly appreciated.

  Thanks in advance.

  You need to give more information... What is broken?

  If ping and vmkping works seems strange that nothing works.

  André

• Cannot migrate through the required network. Someone please...?

  I've set up 3 ESXi hosts connected via 2 parallel networks. One is a slower network (base 100) on 192.168.12.0/24, and the other is a speed gigabit on 10.1.1.0/24 network. Each host is to have two physical network adapters for each network.

  Home #1 Config is as follows: (also see attached photo)

  vSwitch0 (connected to vmNic0 )-> a

  -Network VM (Machine Virtual Port group)

  -Management network (VMKernel Port) vmk0: 192.168.12.30

  vSwitch1 (connected to vmNic1 )-> a

  -Network SAN (Virtual Machine port group)

  -VMKernel-Special (VMKernel Port) vmk1: 10.1.1.30

  NOTE: Host 2 also has a similar setup with a different set of IP addresses.

  My problem is that when I try to cold migrate a virtual machine from one host to another (in the left pane you see, sound of 192.168.12.30 to 192.168.12.32), he's still doing the migration through the slower network (vSwitch 0). I want to be cold migration through the fastest gigabit set to vSwitch network 1.

  I have not yet tried make clusters or vmotion, because I can't seem to properly configure the network I want to serve. so can you please help me with this? I want to make sure when I do the migration (migration to cold to start), happens through the network of my choice, which in this case is the gigabit network. Thank you very much.

  vmTrekker

  Hello

  The stream migration cold traffic over the first Appliance for management of the system detects. In your case, there are two, with the slower network, being the first one it finds. There is no way to route based on activity, so that you either the entire network managemernt vSwitch1 or you live with slower speeds. Personally, I'm not sure that I would never have my network of virtual computer on the same link as my device/network management since they are generally two areas of different trust, etc..

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• The administrative network configuration

  Hello
  Oracle configuration worksheets suggest two options under table 5: Configuration management network card:
  
  Select which network is used for the database server host name. The options are:
  network admin
  or
  client network.
  
  (1) regarding the best practices which network should I choose?
  (2) if I choose "network admin", is that it means that I won't be able to run the exadata/cluster/basic data directly from the host of the database?
  
  Thank you
  
  Published by: Yoav on 07:02 13/05/2012

  To Exadata compute nodes have multiple internal host names. If your Exadata called dm01, the host name of the network admin (management) would be dm01db01, while the host name of the client would be dm0101. The question you are asking about is what hostname will be the host name "primary" for the compute nodes. It was that it was always the host name of the network admin, but now they offer a choice. I prefer to keep with the network admin, so there is consistency in the whole of the grid (there is no client network on storage servers).

• request help to validate the SAN/network configuration

  Hello, I am a new Member of the Forum, but I have worked with ESX for awhile and I do as much reading/study that I can.

  I'll put up a new SAN HP MSA 2012i and 2 guests VMware Enterprise to use the San.

  SAN block size is 64, and I know configure vmdk in VC/VIC, which should make the VMs' offset 64 and therefore correctly align the VMs. 99% Windows Server VM.

  Our SAN has 2 controllers and disks configured as 1 vdisk that will be divided into multiple LUNS.

  management by controller 1 port

  2 ports for iSCSI on each controller.

  All are assigned static IP to the bosom of our subnet 172.16.0.xxx so they can all talk to the HP Procurve 2824 switch and therefore the hosts to be may eventually connect to the iSCSI LUN.

  My questions:

  1 should I configure VLAN on the switch of the management controller ports Ethernet iSCSI SAN?

  2 within the ESX, for his vSwitches, for the Service Console and vKernel, I use different subnets? (for example 172.16.1.xxx for the Service Console and 172.16.2.xxxx to vKernel, etc..) ??

  Or I have to put the vSwitches in the same subnet 172.16.0.xxx?

  3. I know that I create the LUN in the MSA web console and then I point Virtual Center and hosts see LUNS. Can someone refer me to anything that can explain this in more detail?

  Thank you!!

  As they say fast, good and cheap, pick two. It's just a fact of the business. We often work with the material we have and do the best we can.

  Go with 3 VLAN

  1 for the management of virtual machines and any other non-virtuelle 172.16.0.0/24. Use 2 of your network adapters ESX hosts so that it has resume function.

  2 storage VLAN 1 172.16.1.0/24 1 Teddy

  3 storage VLAN 2 172.16.2.0/24 1 Teddy

  This configuration enables redundancy for storage and networks VM/SC, with the hardware you already have.

  You can still develop the latter if you get the funds.

• Question about the nonstandard network configuration

  I'm trying to debug the problem following the configuration of the virtual switch.

  On a vswitch on a host ESX 3.5 with two physical network cards (vmnic0 and vmnic2), there are two groups of ports both with no vlan (i.e., the VLANs set to 0 in the configuration of portgroup).

  Two of these groups of ports use two physical NICs in active-active mode.

  The only difference is that on one of them, call it portgroup pg1, load balancing algorithm is mac hash and "Promiscuous" mode is turned on, and

  Another is to use charge balncing alg based on the port with promisicuous off mode id; Call this portgroup pg2

  A dozen of VMs attached to pg2 are all able to get a DHCP lease; However, if I set one of these virtual machines to fix instead of pg1, it is impossible to obtain a dhcp lease

  It is guess I have this problem can be the physical switch is misconfigured in that the switch ports that attach to vmnic0 and vmic2 are incompatible configured. Howerver, the fact that all 10 VMS access and statistically some would use the vmnic0 and other vmnic2 fit not quite this.

  I realize, there is incompatibility between the hash of the IP and the other nic teaming algorithms, but do not see how change of identification of the port to mac hash would whatever it is outside of the algorithm of the virtual machine uses in chossing between vmic0 and vmic2

  Since it will be difficult to get access to the network switches that I would have pragamtically some alternatives ready before speaking to the team concerned. All of the suggestions.

  Thank you

  Rich

  Hello

  Promicuous mode should have no impact on this. If so, I would be very very surprised. In fact in a vSwitch is the vNIC not the bear who switches to "Promiscuous" mode, so there should be no impact on the bear. The bear is actually in bridged mode.

  Also, remember to score the answers as correct or helpful using the boxes on the left side of the wire screen. It is a good way to show appreciation to other posters.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• 114 the desire does not connect to Asus all-in-one wireless but connects to the wireless network

  I just bought my HP ENVY 114 e all-in-one last week and I tried to connect it to my computer (Asus all-in-one Windows 7 64-bit) and while he wil connect to my wireless very well my computer (or my cell phone which is also an Asus running windows 7 64 - bits) cannot identify it.

  Using the disc doesn't help nor did try manually to add in 'Add printer' in my computer and all the interest to get this particular printer was because it was wireless. If I have to plug in a USB key then I have saved money and bought a less expensive model. All my devices are on the same network, and their firewalls is turned off so that it does not hinder the process.

  When you browse the drive Assembly he asks the IP and I get it exactly as it is on the screen printer that I even printed it out and double checked 5 times and it was exactly the same, but he keeps asking for me to be reintroduced to it since the computer cannot identify the printer.

  Any help would be great I prefer not to have to pack up this thing and take it back...

  Unfortunately, the router and the printer do not get along at this stage.  The IP address changes too often and it is possible that the router has its own firewall.  A large number of firewalls, outside the Windows Firewall, sees a lot of traffic from hpnetworkcommunicator.exe and blocks preventing the software to find the printer.

  I saw this model of router and it doesn't have a built-in firewall.  Unfortunately, I could not see their manual without you register on the site.

  It may be preferable to set a static IP address for the printer in the router's routing table.  To do this, you acceding to EWS the router.  If you don't know how to set the printer's IP address in the router, you can try to contact the vendor of the router.

  Otherwise, I would recommend checking the firewall of the router.  I saw a router cause problems with an overactive firewall in place.

  If you happen to have an extra router around, you can try to use it instead of Paul's to confirm that it is the router.

  EDIT

  You can try to put a static IP address on the front of the printer.  I'm personally not too successful with setting a static IP address on the front panel when the SAP does not load, but this could be one of those cases where it does not.

  First, print a Network Setup page by going to Configuration > Wireless > Network Configuration > print Network Configuration.

  Then, go to settings > network > IP settings > change to the manual.

  Once it is replaced by the manual, it should allow the IP address, default gateway and the subnet mask.  Use the subnet mask and default gateway of the print network configuration.  Use an IP address that is not in use on the network.  You can change the last number of the IP address on the print.  For example, 192.168.1.50 could be converted to 192.168.1.250.

  Setting a static IP address on the front panel does not set servers DNS which is necessary for ePrint operate on this printer.  Now that the static IP address has been set on the front panel of the printer, try to access the SAP by entering the IP address that comes to be defined in a browser address bar.  If the printer load, you should be able to set DNS servers and be ready to go from there.

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Network Configuration operator: link to change speed

  Hello

  in my area of the company, we use laptops Windows 7 Professional with limited user rights. Some of our technicians need to change IP addresses to connect to devices of management, that's why we added them for the group 'Network Configuration operators. Some devices accept only connections with a certain speed (link speed & Duplex is set to "AutoDetect" as default), so the speed must also be defined by the technicians themselves.

  The problem is that for the 'Network Configuration Operators' group, the "Advanced" in "Network connection properties" tab is not visible. Is it possible to see the Advanced tab (or change the speed of connection & duplex) without administrative rights?

  Thank you

  Steve

  Hi Imran,

  Thanks for your recommendation! I did, this is the link to the thread: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/8affd9e4-63a6-44c3-a259-59aad74b45f6

  Steve