problem HP DVD RAM UJ892

Similar Questions

• Problem of DVD - RAM Equium A110-233: "device i/o error".

  Hi, I recently have not been able to play audio CDs using my DVD - RAM drive and would be grateful if someone could help out me. When I inserted an audio CD to play on one of my media players, the disc doesn't show and read that there is "no disc in drive D:". This has happened on both of my media players and has therefore decided to load it manually via my computer, when I clicked on the icon on the player it read that it was not accessible because of a "device i/o error", however the reader will always read DVD and CD, the drive to read also played fine Audio CD yesterday and up to this point. I was wondering if someone could give me advice on how to solve this problem, thank you.

  Hello

  I will also propose removing the drive from the Device Manager.
  In addition, you can view the properties of the drive. Simply by right clicking on the drive and choose Properties.
  Arrived at the Hardware tab, and then select the drive again and use the properties button.
  Then a new window should appear. Go to the Properties tab and check if the option called enable digital CD audio for this CD-rom device has been marked.

• problem HP dvd ram uj8c2 13 code

  I have a dvd ram with an exclamation point in Device Manager that won't play DVD.

  The problem code is 13.

  Gear update drivers (gearaspiwdm.sys) gear Web site. http://www.GearSoftware.com/support/drivers.php

  DVD player works now.

• Driver MATSHITA DVD-RAM UJ8E1 error

  I have a brand new Acer Aspire 571 Windows V3 8 & the first time I tried to use the DVD player, to rip a CD, nothing happens. I checked the devices & printers in the control panel and the device 'Aspire' shows a yellow triangular exclamation point (need to troubleshooting and status driver error). I troubleshoot the device & advises I reinstall when I apply this fix all I get is found problem MATSHITA DVD-RAM UJ8E1 has a driver problem. Not fixed.

  I have had only the laptop for a few days & have spent a lot of time to transfer & sorting my library top via an external drive, so I am reluctant to take it back to the retailer. I had much rather fix the drive but need help!
  Thank you in advance, a forum user first.
   
  [Moved from comments]

  Hi Delphine,.

  Try to remove the entry from Pfc that relates to the pfc.sys.

  To remove Pfc input double click LowerFilters and under value data, remove Pfc > OK

  Create a system restore point beforehand and restart the computer after.

• A50 DVD-RAM drive problem

  Hello
  When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
  The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

  I think the update of the firmware should fix it, but I can't find it anywhere.

  Adrian

  Hi Ado,

  Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

  Rudi Bye

• Tecra A8 - Mat * a DVD - RAM UJ-problem reading 841S

  I have Tecra A8-143 (PTA843E) Lap, WXP Pro SP2 original. Later, I installed SP3 and the problem with the topic. Finally the time Mat * one impossible reed VERBATIM DVD - R (4, 7 GB) discs, even those who got burned in 'home' with Nero (or record now, I'm not sure), although reed he earlier without problems.

  In addition, the reader can Reed DVD-R and Memorex CD - R Verbatim discs. In the meantime I have installed and uninstalled several programs and we hope that the point is in the configuration, but I afraid that SP3 is "fatal error" and I cannot flee from resettlement.

  It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers? My experience is humble and I'll be very grateful for help.

  Thanks in advance.

  > It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers?
  As noted in the previous announcement the CD/DVD drive is still controlled by Microsoft Windows driver!
  There is no other pilot who could control the STRANGE

  Back to your question;
  There are two reasons why your CD/DVD drive does not read the disc;
  First the disc would be insufficiently supported or the s drive laser lens cannot handle the disc to the stress matrix laser lens could also not be clean
  You could clean the lens with a cotton tip and alcohol
  In my case it helped

• Satellite A135-S2386 - DVD - RAM drive problems

  Hi guys, I have a Toshiba Satellite A135-S2386.
  I had once repaired because it is over heated and died.

  One problem I noticed, the fool who fixed, he didn't put it back correctly, and the DVD player has been hot glued...
  I fixed in March, April. But I'm used to, I can anyway...

  However, there is a significant problem.
  Written DVD player and bed PERFECTLY well in windows, however it cannot not be detected in the BIOS or what not.
  As XPInstallation Windows, Vista install detects it but BIOS can't.

  Can I update the firmware of the DVD-RAM? It's years Panasonic UJ-840.
  Or I can update the BIOS of the machine itself?

  You can boot from the CD? If the boot of CD work, then the BIOS is to see it properly.

  You could try an update of the BIOS anyway, go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

• Satellite M30X and Mat * a dvd - ram uj-8205 burning problems

  I have Satellite M30x and Mat * one year dvd - ram uj-8205. On the beginning everythinks worked very well, but in the last months of 2-3 that it cannot reads some CD and have problems with CD burning
  I restarted the laptop with the recovery cd, but still the same problems. Before robooting, I used nero 6, thougth perhaps, this is the problem in nero, now using just Sonic record now accompanies the DVD.

  Please anybode help me?

  Hello

  How to help you if you don't mention what CD cannot be burned (original music CD, homes burned CDs, just specific producers, only some files are not readable). Give us more info on this issue.

  Check a little better, and if there is no success is perhaps the defective drive. It is well known that some CD (a cheaper) cannot be burned properly.

• Problem with Mat * a DVD - RAM UJ - 841S Satellite M70-165

  Hello

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Then the CD/DVD unit can read the DVD-audio, CD, or movie, but when I open a DVD (DVD software) data it is said that "it is not possible to access the D:\". ». and some time "poblem whith I/O device. and the same problem that I have with some new cd (which were not burn)
  I have'nt try every thing. I come here to ask the question.

  Sorry for my bad English

  THX

  You can do the following: go to download drivers of Toshiba Europe site and check if there is an update of firmware for this specific player. If so, I strongly recommend you apply and check if it works.

  If the didn t of the firmware update worked later you assumed that the reader is defective and must be replaced.

  Welcome them

• Driver DVD-RAM on Satellite A110-149 problem

  I recently received my copy of Express Upgrade to Windows Vista and I installed it as described in the user guide.

  The first time Windows Vista ran normally and I had no problem with my DVD-RAM. But then, after having upgraded from windows it asked me to reboot. When I rebooted my computer Windows Vista does not recognize the DVD-RAM driver.

  I searched the Web from Toshiba site, this driver but I couldn't find it. I just find drivers Windows XP, which could not be installed.

  Do you have anyone had the same problem, or knows where I can get this driver?

  My laptop is a Satellite A110 - 149 (PSAB6E) and the DVD-RAM is a CARPET * a DVD-RAM UJ - 841S

  Hello

  usually, a DVD-RAM needs no driver, it must be recognized automatically. Have you ever tried to remove the drive in system properties and restart the system?

  Windows should install correctly after that. If this isn't the case, please make a comment.

  Welcome them

• Problem - Windows 8 and Matshita DVD-RAM UJ8C2 with touch ideapad P400

  Hello

  I have a touch ideapad P400. I have Windows 8 and a drive Matshita DVD-RAM UJ8C2. The drive is not showing in my computer and do not read any disc I put in. In the devicemanager, I get an error code 19. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I've updated the drivers. Re-installed drivers. Restart the computer. Removed and re-installed the drive. None of this has worked. Know what to do now?

  If you installed the latest version of the attempt of drivers gear once again, uninstalling the drive through device and then Manager reinstall the drive.

  If still a problem, uninstall the drivers of material from "Uninstall a program", and then restart the computer.

• PROBLEM WITH DVD DRIVER 'MATSHITA DVD-RAM UJ8EI.

  All of a sudden my cd/dvd driver will not work. O/s is to win 8 64-bit. I get the following message?

  Reinstall the device driver: problem with the driver for MATSHITA DVD-RAM UJ8EI, MATSHITA DVD-RAM UJ8EI has a DRIVER PROBLEM.

  I have, have repeated the AutoCorrect, but still get the same message. Can someone help me solve the problem?

  Hi Auggy, thanks for the quick response. I did a 'restoration' and now the pilot works again.

  If all goes well it will continue to work. Hope you have a fantastic evening.

• Problem with Mat * a DVD - RAM on P30 - 145 drive

  Hi, I have a Toshiba P30-145 with a carpet * a DVD-RAM UJ - 831S Cd/DVD drive. I installed the version of Nero in my possession from my old computer, v.5.5.9.22, which seems to date back to 2002 c. Nero is not recognizing the carpet * one as a valid drive.

  Is it because my version of Nero is too old? I visited the Nero Web site and find a list of compatible drives, but unfortunately, while much of Mat * one disks appear, my version is not. Any ideas?

  Thank you!

  Duncan

  Hello

  I think you are already on the right track. Is there any availble upgrades for your Nero? Sometimes there are packages of fixes that also contains some data-burner.

  Pick up or use another version of the burning software.

  BR

  Tom

• Qosmio G35-av600 - DVD - RAM problem

  Hello

  the drive from DVD-ram to my Qosmio G35-av600 died suddenly, he would not read something, so I went to come in and buy a replacement (the model is UJ-856-C), but when I changed the drive and starting the pc, I get an error saying error of CD-rom (I saw in another forum it takes with master-slave config), could someone please help me?

  Thank you very much, any help would be appreciated.

  I think you're an IDE #1 error message. Am I wrong?
  This error message is displayed due to bad settings master/slave/c-salt.

  The parameters of slim-line CD/DVD players is not editable using a jumper.
  The settings are controlled by the software, and to my knowledge it of not possible to change the settings.
  Therefore, not all CD/DVD drives are compatible!

  Before buy you a portable player, you must contact the authorized service provider and ask that compatible!

  Good bye