the change network configuration, now what?

Similar Questions

• I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through. Now what? I tried to repeat the process about 6 times now!

  I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through.  Now what? I tried to repeat the process about 6 times now!

  Sorry for the confusion.  I must be useless to English.

  Forget the two laptops.
  I have a problem with a laptop that I tell you all (the Inspiron 1720).
  The disc that I use is labeled as a Windows Vista reinstall disk and provided with the computer when I bought it.  I'm not trying to use it on another computer.

  Reference Dell it is a problem with a process of recovery of Windows and, therefore, a problem of Microsoft.

  See you soon

  Problems with the Dell restore process, contact Dell.
  Dell wrote their recovery process and provided you with this DVD, NOT Microsoft...

  It is their software.

  Ask them for a different recovery DVDs.

  You say that the hard drive has failed.

  He could have more than just tough that failed.
  You can have other hardware issues.

  Hardware issues are beyond the scope of these Forums.

  Good luck with Dell.

  See you soon. Mick Murphy - Microsoft partner

• How can I remove the HP Network Configuration utility

  I am P2Ving some HP machines and reading the posts here on how to remove most of the HP components, but I'm stuck on how to get rid of the HP Network Configuration utility program that puts the HP Network icon in the system tray.  There is a post of Guillermo Musumeci in 2007 that said using this command:

  SNetCfg.exe - v u cq_cpqteam

  to do it, but I can not find snetcfg.exe on this server.

  There is also a post of Jasemccarty in 2007 that said this keymay be the key to remove:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\

  {4D36E975-E325-11CE-BFC1-08002BE10318}\{FD0FF0D6-4876-4894-9274-258564E35C07}

  But this key does not appear in the registry on that server.  Anyone has any ideas on how to remove the last piece of a P2V-centric software HP had VM?

  Anyone know why HP makes breath difficult to remove their drivers and other components?

  Thank you

  Dan

  Open the properties of your network card (either will do)

  Go - properties and click the HP tool and select "Uninstall".

  See also http://ctxadmtools.musumeci.com.ar/HPPSPCleaner/HPPSPCleanerDownload.html for a tool to strip all HP components for you - I use it regularly after P2Vs.

• books on the oracle network configuration?

  Salvation;
  
  I'm looking for books about the oracle network configuration details. I tried oracle press, O'Reillys, Amazon and google; However, I only found books specific to oracle net that bear a date entirely. It seems that General database management books have chapters on the configuration of the network, however.
  
  At the configuration of the network under oracle 10 g + arrived at the point where the comprehensive books on the subject are not worth the cost?
  
  I was hoping to find information on the syntax of different files, which can go in the and how to solve problems of connectivity - preferably in a place so much when I'm faced with a problem, I don't have to go hunting for more information. This and he is studying a whole lot easier.
  
  Any info is greatly appreciated.
  
  Thank you.
  
  Doug O'Leary

  Just go through this

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14196/network001.htm#sthref174

  http://download.Oracle.com/docs/CD/B19306_01/network.102/b14212/TOC.htm

  Published by: CKPT on July 19, 2010 19:58

• I can not connect on my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. s not now what it was

  I can't connect to my user profile who is also the administrator.  I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.

  the operating system is Windows Vista Home Basic 32-bit.

  Hello

  If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.

  Here are the different circumstances where it can help you.

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.

  Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• HA installation failure due to a misconfiguration in the host network configuration?

  We have no setup problem on a cluster HA containing 2 ESX 4.0 host. However, after adding a host ESXi 4.1 and configuration HA to contain all 3 hosts, HA shows failure due to a misconfiguration in the network configuration for the ESXi 4.1 host host.
  
  Remembering this bad spell names network could cause a failure of HA configuration, we proceed to rename network management Service Console host ESXi 4.1 in order to match the network management of the ESX 4.0. However, this does not.
  
  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  crescendas wrote:

  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  Hello

  Yes, you can mix ESXi and ESX on this same cluster

  1. Check your DNS - should resolve to long and short names of all nodes in a cluster that you
  2. are the new ESXi in the same IP subnet as the older ESX servers?
  3. try to disable and enable HA
  4. Check below link
     http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1001596&sliceId=1&docTypeID=DT_KB_1_1&dialogID=213574287&StateID=0%200%20213576136

  Good luck

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• After you move a crowd is to Cluster HA, got a misconfiguration in the host network configuration

  An existing host works well in the datacenter, which only had a NIC card. But he moved to Cluster HA, got

  HA configuration

  10.1.1.203

  Unable to complete the configuration of the

  HA agent on the host computer. See the details of the task

  For more information. Incorrect configuration

  in the configuration of the host network.

  Incorrect configuration

  in the configuration of the host network.

  It takes longer for HA NIC card? But, on the procedure for creating HA, not this requirements.

  Thank you!

  George

  Looking at your screenshots I would suggest that you create the second and third vSwitch with 192 and 172 port groups that exist on the other host.

  André

• Most of the CS6 was not properly installing the elements (Windows). Now what?

  Message this morning that Adobe updates should be installed on my work laptop. But after the process, the message "Update Complete" indicated that only 3 of the 14 updates had been installed successfully.  "Some components of the following products could not be updated successfully."  The error log provided no details as to why. So now, what is my next step to finish all updates?

  Run the Creative Suite cleanup tool, reinstall the programs, try again.

  Mylenium

• When I try and click on an e-mail address is sent me to outlook instead of yahoo email? I changed the settings in internet options so now he opens internet explore to open the yahoo mail. Now, what

  When I am in craigslist and want to reply to an ad, click on the email address and he sent me to outlook express. Then I went into internet options and change the yahoo messaging client, and now he send me to yahoo mail, which is where I want to go. But he sends me through Internet Explorer and not Foxfire. What is happening and how to fix this? I have Foxfire 6.0.

  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• The administrative network configuration

  Hello
  Oracle configuration worksheets suggest two options under table 5: Configuration management network card:
  
  Select which network is used for the database server host name. The options are:
  network admin
  or
  client network.
  
  (1) regarding the best practices which network should I choose?
  (2) if I choose "network admin", is that it means that I won't be able to run the exadata/cluster/basic data directly from the host of the database?
  
  Thank you
  
  Published by: Yoav on 07:02 13/05/2012

  To Exadata compute nodes have multiple internal host names. If your Exadata called dm01, the host name of the network admin (management) would be dm01db01, while the host name of the client would be dm0101. The question you are asking about is what hostname will be the host name "primary" for the compute nodes. It was that it was always the host name of the network admin, but now they offer a choice. I prefer to keep with the network admin, so there is consistency in the whole of the grid (there is no client network on storage servers).

• Check the required Network Configuration...

  Hello

  I want to know what would happen if I finish the installation to the end this stage fails?

  Thank you

  You can use Oracle Net Configuration Assistant after installation to complete the installation of network for your database. Without it, customers will not be able to connect to the database. However, you should be able to connect to the database to an account of an operating system on the same server as the database instance.

• Question about the nonstandard network configuration

  I'm trying to debug the problem following the configuration of the virtual switch.

  On a vswitch on a host ESX 3.5 with two physical network cards (vmnic0 and vmnic2), there are two groups of ports both with no vlan (i.e., the VLANs set to 0 in the configuration of portgroup).

  Two of these groups of ports use two physical NICs in active-active mode.

  The only difference is that on one of them, call it portgroup pg1, load balancing algorithm is mac hash and "Promiscuous" mode is turned on, and

  Another is to use charge balncing alg based on the port with promisicuous off mode id; Call this portgroup pg2

  A dozen of VMs attached to pg2 are all able to get a DHCP lease; However, if I set one of these virtual machines to fix instead of pg1, it is impossible to obtain a dhcp lease

  It is guess I have this problem can be the physical switch is misconfigured in that the switch ports that attach to vmnic0 and vmic2 are incompatible configured. Howerver, the fact that all 10 VMS access and statistically some would use the vmnic0 and other vmnic2 fit not quite this.

  I realize, there is incompatibility between the hash of the IP and the other nic teaming algorithms, but do not see how change of identification of the port to mac hash would whatever it is outside of the algorithm of the virtual machine uses in chossing between vmic0 and vmic2

  Since it will be difficult to get access to the network switches that I would have pragamtically some alternatives ready before speaking to the team concerned. All of the suggestions.

  Thank you

  Rich

  Hello

  Promicuous mode should have no impact on this. If so, I would be very very surprised. In fact in a vSwitch is the vNIC not the bear who switches to "Promiscuous" mode, so there should be no impact on the bear. The bear is actually in bridged mode.

  Also, remember to score the answers as correct or helpful using the boxes on the left side of the wire screen. It is a good way to show appreciation to other posters.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• request help to validate the SAN/network configuration

  Hello, I am a new Member of the Forum, but I have worked with ESX for awhile and I do as much reading/study that I can.

  I'll put up a new SAN HP MSA 2012i and 2 guests VMware Enterprise to use the San.

  SAN block size is 64, and I know configure vmdk in VC/VIC, which should make the VMs' offset 64 and therefore correctly align the VMs. 99% Windows Server VM.

  Our SAN has 2 controllers and disks configured as 1 vdisk that will be divided into multiple LUNS.

  management by controller 1 port

  2 ports for iSCSI on each controller.

  All are assigned static IP to the bosom of our subnet 172.16.0.xxx so they can all talk to the HP Procurve 2824 switch and therefore the hosts to be may eventually connect to the iSCSI LUN.

  My questions:

  1 should I configure VLAN on the switch of the management controller ports Ethernet iSCSI SAN?

  2 within the ESX, for his vSwitches, for the Service Console and vKernel, I use different subnets? (for example 172.16.1.xxx for the Service Console and 172.16.2.xxxx to vKernel, etc..) ??

  Or I have to put the vSwitches in the same subnet 172.16.0.xxx?

  3. I know that I create the LUN in the MSA web console and then I point Virtual Center and hosts see LUNS. Can someone refer me to anything that can explain this in more detail?

  Thank you!!

  As they say fast, good and cheap, pick two. It's just a fact of the business. We often work with the material we have and do the best we can.

  Go with 3 VLAN

  1 for the management of virtual machines and any other non-virtuelle 172.16.0.0/24. Use 2 of your network adapters ESX hosts so that it has resume function.

  2 storage VLAN 1 172.16.1.0/24 1 Teddy

  3 storage VLAN 2 172.16.2.0/24 1 Teddy

  This configuration enables redundancy for storage and networks VM/SC, with the hardware you already have.

  You can still develop the latter if you get the funds.

• Passed the VCP exam today, now what that?

  I took the VCP exam today and passed with an even 300. What happens then? Should I wait for VMware to match my training in my review? Y at - it any action required on my part?

  Thank you

  Daniel

  Yes, under the myTasks section you will see the article "VCP on vSphere4" appears with a list of things to do.

  The points are:

  VCP on vSphere4 Exam

  AND

  Confirm the shipping address 4 VCP

  AND

  Transcript release 4 consent VCP

  AND

  Agreement of VMware (VCP4) Certification

• I followed the instructions to restore my recently bookmark 'menu', but it did not work. It does not appear in the list. So now what?

  I typed in... Subject: config... promised not to repeat... searched and found broswer.places.smartBookmarks... etc... reset the value to 0, clicked on the menu and you leave - EVEN the recently the bookmark option does not appear.
  I even a click with the right button on the value and chose reset. Still nothing.

  Any suggestions?

  Thank you

  Maybe this will help you speed the part of search if you export your Favorites to a file as HTML and then open that in Firefox (it is displayed as a web page). You can use search (Ctrl + f) page search recently. (And you can keep the file of export only edition special bookmarks backup.)

  This article has the steps to create the file: Export Firefox bookmarks to an HTML file for backup or transfer bookmarks. You can save in any convenient place, and then double-click it to launch in Firefox (assuming that Firefox is the default browser).