'Checkin Standard' link also has fields Records Manager

Similar Questions

• Records Manager error message

  Hello

  We have recently upgraded to Records Manager of TRIM version 7.1 and that we had a few problems that I hope someone can give me some advice on.

  My colleague stop error message "the requested operation cannot be performed on a file with a mapped section open user #800704 c (8).» She is currently working on a PowerPoint file that has never been saved in the folder Manager. It is copy and paste information from another PowerPoint presentation (also not saved in the folder Manager) in this new. Whenever she's copying something a new slide and hit save this message appears. 'OK' to hit does disappear for a minute, and then it reappears again.

  A that anyone has had a similar problem? So, I am confused since no documents, she works to have links to Records Manager at all.

  Any suggestions are appreciated

  Thank you!

  Sarah

  Hello SarahECVO,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do it
  http://h30499.www3.HP.com/T5/HP-Records-Manager-HP-trim-Forum/BD-p/ITRC-1015

  I hope this helps!

  Concerning

• Create component URM reports - records management.

  In the management of documents in the content of the WebCenter 11 g (11.1.1.9), created reports are generated by a version of the runtime of Oracle BI Publisher.  In order to create these reports, there are report templates that are stored during the initial set-up of records management.  These models are in rich text format (RTF). I use the default templates without any customization (Option: Reports Create-> Full-> search results results), and I am facing a few analysis errors when reporting of any University Complutense of MADRID search results.

  To using the option (create reports-> selected-> search results items) generates the report without error. Also when the research of the Complutense University of MADRID use no request (Full search without filters) the report is generated without error.

  An example output of the Complutense University of MADRID research that generates the error below: dDocType < corresponds to > "OS"

  Content Management - Content Server] [DSID: 0000L3JUKde3n345zVS4yW1MEYQp000006] general exception[[
  intradoc.common.ServiceException: 
  *ScriptStack RUN_RMA_SEARCH_RESULTS_REPORT
  3:getSearchResults,**no captured values**
          at recordsmanagement.RmaSearchService.getSearchResults(RmaSearchService.java:117)
          at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
          at java.lang.reflect.Method.invoke(Method.java:606)
          at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
          at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
          at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
          at intradoc.server.Service.doCodeEx(Service.java:639)
          at reportpublisher.RPServiceHandler.getSearchResults(RPServiceHandler.java:184)
          at sun.reflect.GeneratedMethodAccessor163.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
          at java.lang.reflect.Method.invoke(Method.java:606)
          at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
          at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
          at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
          at intradoc.server.Service.doCodeEx(Service.java:622)
          at intradoc.server.Service.doCode(Service.java:594)
          at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1737)
          at intradoc.server.Service.doAction(Service.java:566)
          at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1527)
          at intradoc.server.Service.doActions(Service.java:561)
          at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1459)
          at intradoc.server.Service.executeActions(Service.java:547)
          at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:760)
          at intradoc.server.Service.doRequest(Service.java:1976)
          at intradoc.server.ServiceManager.processCommand(ServiceManager.java:520)
          at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
          at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1358)
          at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1735)
          at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:223)
          at sun.reflect.GeneratedMethodAccessor138.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
          at java.lang.reflect.Method.invoke(Method.java:606)
          at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
          at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
          at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
          at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1681)
          at idcservlet.IdcFilter.doFilter(IdcFilter.java:457)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:138)
          at java.security.AccessController.doPrivileged(Native Method)
          at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
          at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
          at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:121)
          at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:211)
          at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:138)
          at java.security.AccessController.doPrivileged(Native Method)
          at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
          at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
          at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:121)
          at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:211)
          at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
          at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
          at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
          at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  Caused by: intradoc.common.ServiceException: !csSearchQueryParserParsingError,dDocType%3cmatches%3e%60OS%60,8
          at intradoc.search.UniversalSearchQueryParser.parseQueryEx(UniversalSearchQueryParser.java:1182)
          at intradoc.search.UniversalSearchQueryParser.parseQuery(UniversalSearchQueryParser.java:265)
          at intradoc.search.UniversalSearchQueryParser.parse(UniversalSearchQueryParser.java:193)
          at intradoc.search.DBSearchConfigCompanion.fixUpAndValidateQuery(DBSearchConfigCompanion.java:214)
          at intradoc.shared.CommonSearchConfig.fixUpAndValidateQuery(CommonSearchConfig.java:1711)
          at intradoc.server.SearchService.prepareLocalSearch(SearchService.java:1359)
          at recordsmanagement.RmaSearchService.prepareLocalSearch(RmaSearchService.java:196)
          at intradoc.server.SearchService.getSearchResults(SearchService.java:537)
          at recordsmanagement.RmaSearchService.getSearchResults(RmaSearchService.java:100)
          ... 65 more
  

  Cannot run the Parsing error with the character 8 report in the query: 'dDocType % 3cmatches % 3F % 60OS % 60.

  PS: I use the URM as a component with the contents of the Oracle 11 g, configured as stand-alone/typical.

  Any ideas are welcome. Thank you.

  Hello

  It is a question that has been raised with the development team. If you have a support identifier then raise an SR and get the next bug to be attached with it. Or you can control gate mos:

  Bug 21919096 - error when implementing WCCREC full results report with parameters

  
  

  The fix will be released as part of MLR5 for 11.1.1.9.0

  
  

  Thank you

  Srinath
  

• Hi team! I would like to change my payment information, but I can't. I need to change the address of the United States to the Russia. my VISA card also has a Russian address. Thank you! Best!

  Hi team! I would like to change my payment information, but I can't. I need to change the address of the United States to the Russia. my VISA card also has a Russian address.  Thank you! Best!

  You must contact the technical support for this.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  https://helpx.Adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

  Concerning

  Stéphane

• Creating an external link in a field based on the value of another field

  Have 2 fields in a table: CR_Number and CR_Link (two varchar2s). If a CR_Number is filled in the data form, the CR_Link will be filled with a link to an enterprise application manager to open this application from Apex.
  
  This is my original formula of SharePoint: = IF ([VC #] = "","","< a href =" http://intranet.att.com/oneattcr/crsummary.cfm?crid= "& [CR_Number] &" "target = '_blank' >" & [CR_Number] & "< /a >" "). I tried to reflect the HTML but does not work. It's my current to DECODE syntax:
  
  DECODE (CR_NUMBER, NULL, Null,'|) CR_NUMBER:')
  
  Where I'm going wrong? Appreciate any help. Thank you!

  Not connected to the test currently but should be something like;

  DECODE(CR_NUMBER,NULL,Null,''||CR_NUMBER||'')
  

  Published by: Craig C March 22, 2013 21:18

• That errro again... host currently has no error management network redundancy

  I don't get the "host currently has no error management network redundancy.

  I think that I have the correct configuration, but not sure since our network guys gave me the IP addresses to use for HA.

  Here is the config for HA

  ESX Server 6.

  Service console is on 0 to 172.16.1.106 in 255.255.0.0 vSwitch

  The second redundancy console) is on vSwitch 4 to 77.77.77.10 in 255.255.255.0.

  ESX Server 5.

  Service console is on vSwitch 4 to 172.16.1.105 in 255.255.0.0

  The second redundancy console) is on vSwitch 4 to 77.77.77.9 in 255.255.255.0.

  I've reconfigured HA on ESX Server 6 and ESX Server 5 and even restarted them but still not the mistake of redundancy...

  Something is not properly configured?

  stanj wrote:

  If the collection of network adapters offer the same functions of redundancy, so why so many articles point to using a second console HA redundancy?

  It's simply the options given. There are several ways to provide a redundancy of HA heartbeat.

  The article also indicates HA advanced features such as das.isolationaddress2 and das.failuredetectiontime will be charged when you set up a secondary service console. It is an approach more effective, but still more complicated?

  These advanced options are not always available and also provide another way to configure HA redunancy.

  Here's something interesting to look at as well

  http://www.yellow-bricks.com/VMware-high-availability-deepdiv/

  For me, I always learned the KISS method (Keep it Simple stupid).  Add a second NETWORK card is the easiest way to keep your redundant environment, in my opinion

• MacBook HD has a record library and a system with a subfolder Library folder. They do not seem to be an exact replica, but if both exist?

  MacBook HD has a record library and a system with a subfolder Library folder. They do not seem to be an exact replica, but if both exist?

  Yes.

  (141504)

• Error 734: PPP link control has been terminated... always show upward when I try to connect to the internet... How do I solve this problem... I m using win 7 as my operating system.

  • I want to connect Internet usiang dial-up access. I m using nok * a modem n81as and telkoms * l as the map. When I m trying to connect it always failed and an error appeared and said: "Error 734: the PPP link control has been terminated. and I m using Windows 7 as my operating system. Please help me solve this problem.thanks a lot...

  the 734 error can be solved by adding a piece of code...

  On your laptop, open the list of devices and dpouble click on the unit matched BB... Select material and double click on blue tooth modem... Select advanced in the additional parameter, place the following code:

  + cgdcont = 1, "IP", "bb.telus.com"

  I'm on telus and by using a bold 9700... to determine the URL above, you BB select Option > Advanced Options > TCP/IP

  APN:BB. TELUS.com... in the code snippet above replace bb.telus.com by all that is not in your apn...

  try to connect

• My computer takes 20 minutes to start and also has a black screen

  Hello world

  I have a Dell Dimension 9200 and recently every time I start my computer or it reboot, it takes 20 minutes to get to the desktop and also has a black screen. This issue has occurred only recently and I don't know what is the cause and so advice would be welcome.

  Other strange things include all my system restore points are missing and so I can't return the operating system to a previous date when it was working properly.

  And when I did a test on the hard disk, one of the internal drives have had a "Fail" result - Code 7 back. I don't know if this was caused by a virus or is the result of a mechanical failure in the hard drive itself.

  Thank you very much.

  Gordon

  

  Bev.

• Send an E-mail link with merge field

  I am preparing an email that will come "from" beneficiary relationship managers (RM).  In the email will be the Mr e-mail address.  I would like to make the clickable address so that it creates a new email from the platform of e-mail recipients.

  How can I encode the email so that email address is dynamic based on the database information (merger of field)?

  Thank you.

  You might want to try: Officer_Email1"> Officer_Email1

  Technically, we do not use merge field twice. We are inserting a mailt to post a link (with the field even fusion) for the merger of field we have first inserted

  Hope this helps

• I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  The product is CS3 Web premium. It was recorded on 2 computers in 1998 and the two are no longer working. I have all the disks and the original serial number.

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• I tried to reload Nf6 Photoshop I get a response of "that s/n has no record of this computer" can you help me get it reloaded?

  I had computer problems and my computer was formatted and I lost everything, pictures, programs, videos, reports, etc., I tried to reload Nf6 Photoshop... I get a response of "that s/n has no record of this computer"... or something like that... can you help me to get reloaded?

  Your serial number appears on your account page?

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  NOTE: this is a public forum, so don't post NOT your serial number here!

  > or something like that

  Displaying the text of an error message will help the people to help you

• Links Hypertext has stopped working.

  I've updated my site yesterday and all links Hypertext has stopped working?

  I do what I normally do, what I've normally had, now they will not be just a link.

  www.podmatcher.com

  In your file to Muse on the page template, there is a widget that causes you a conflict. The widget Page transition is causing your problem. Remove the widget of transition of the master page and everything works fine again.

  

• ESXi 5, link group, VLAN and the Management Interface

  Greetings-

  I suspect that the answer to my question is: 'Buy an another NIC Intel' but here goes:

  I have a server ESXi here with 2 Intel GigE NIC, connected to the same switch managed ahead of Cisco.  A (vmnic0) NETWORK card is connected to the VLAN 200 while the second (vmnic1) is connected to the VLAN 300.  Ports on the Cisco are defined to access mode.

  Internally, the server ESXi, vmnic0 is connected to the 'public' vSwitch, while vmnic1 is connected to the "private" vSwitch

  I also updated the ESXi management IP 24 even as private vSwitch.  This is the key, I suspect.

  I tried to combine the two GigE interfaces in a connection unique 2xGigE and trunk two VLAN 200 and 300 through it.  After struggling through the menus on the ESXi console INTERFACE, I managed to get the IP management save and who responded and was able to connect to the server with the vSphere client.  I did it in X'ing the vmnic0 and vmnic1 in the configuration interface, then setting VLAN 300 in the configuration of VLANS.  But I could not the team/bundle correctly in the two vSwitches vmnic interfaces.  I could never attach a vmnic to one of the switches.

  Can I do all this with only 2 GigE interfaces and maintain access to IP management?

  SWITCH CISCO < == trunk w / VLAN 200 300 2xGigE == > SERVER ESXI

  VLAN 200 is a 28 audience

  VLAN 300 is a private 24 (for example: 192.168.100.0/24)

  IP management is 192.168.100.2

  I need to create a third VLAN for the management IP address and move?  If I master, say, VLAN 400 down to the ESXi server, use another block 192.168 for his IP address, I'll be able to take the vmnic0 and vmnic1 and team on the TWO vSwitches?

  Always follow me? ... :-)  If I can clarify this, by all means ask.  I apologize for the sort of random babbling here.  Thank you!

  JAS

  jasonvp wrote:

  Rickard Nobel wrote:

  You can not have your two vmnic (physical NIC ports) connected to two vSwitches and at the same time have a "grouping". You need to delete one of the vSwitches and recreate the vSwitch remaining trade. VLAN will insulate them even different networks.

  Thanks for the pointers; I finally had the opportunity to try this out and it works as expected.  I EF you the 'right answer' but apparently the forum won't let me since you already have an answer of "useful".

  Nice that you got it working! When you perform the actual configuration with vSwitch Hash IP and physical switch LAG config, it might be a little difficult to do things in the correct order to not lose connection to the ESXi host.

  You can select this message if you wish.

• How to make an anchor link also refresh the page?

  I'm trying new things with some widgets (compositions) and I would like to make some anchor links also refresh my page (on the mobile version of my site). I tried to put the link in full instead of simply select my anchor (#myanchor .com/mypage) but who works as the first (perhaps because the user is already on .com / my page #myanchor?)

  A bit of googling found me a way to do this:

  window.location.href = 'mypagetoreload.htm#jumptosection1';
window.location.reload(true);

  but I don't know how to use it in Muse...

  Thanks in advance!

  OK, I think I understand what you're trying to do. You can use the scroll for this movement options as then your page reload. Feel free to post a link or send me a link in private message so I can see if I'm wrong in what I believe you are trying to do. But I'm sure if I understand that by using the movement of scrolling options should stop for you.