Links Hypertext has stopped working.

Similar Questions

• Dynamic link manager has stopped working

  I downloaded and installed photshop CS6, apparently successfully, but when I try to launch the application, I get repeated messages this dynamic links Manager has stopped working.  There was also a msg that the application has failed to start because MSVCP100.dll is not found. Photoshop and bridge seems to work where I can browse and open files. However I am repeatedly interrupted with msg telling me the dynamic link manager has stopped working. Suggestions?

  http://forums.Adobe.com/message/4471627

• CS6 on Windows 7, when I try and send my project Adobe Link, then I still repeatedly get the error message "still has stopped working, windows closes the program.  I get the same error message when I try and open again on its own.  Help Woo

  Also when I open again as a standalone program, and when I try and export my work via Adobe link to send to again, I get the same error message - "Adobe Encore has stopped working.  Windows will close the program.  Help would be really appreciated.  Thank you.

  Run 'as administrator' If your account has administrator privileges or not.

  Let us know if that suits him.

• May we all find a solution to this problem [ID CC 2014 has stopped working] for this file {included link}

  Hi all

  May we all find a solution to this problem [ID CC 2014 has stopped working] for this file {Dropbox - Questions CH-5 .indd}

  Note: I could open it, but suddenly I encountered this problem with just this file without any of my files.

  Thanks for your help.

  Try the blind of export to the script .idml to Adobe Community: InDesign 6 crashes when you try to open a specific document. All others are open OK.

• Lightning network adapter has stopped working

  Hello

  All of a sudden, my (original Apple) map network Thunderbolt has stopped working. I'm looking for advice to get it working again without reinstalling. This is the second time in 6 months that it happened, and the last time a reformatting it fixed and restore my entire user account does not restore the problem, so all signs point to something in the heart of the system and not "userland".

  Why I know that the adapter is not the problem:

  -Adapters two colleagues also do not work

  -Adapter works very well in recovery, but not once started

  What happens when I plug:

  -Lights led network switch, so a link is established

  -L' adapter remains 'red' in the network settings

  -dmesg shows:

  IOThunderboltSwitch < 0 > (0x0): listenerCallback - HPD Thunderbolt package for road port = 0 x 0 = 1 disconnect = 0

  [Start of PCI configuration]

  [End of PCI, bridges 14, 15 devices configuration]

  No obvious signs of problems.

  Steps taken to solve the problems:

  -If I delete the card of network settings, I can never add again; He simply never shown even if it is plugged in and the link light is on the switch.

  -Crushed/Library/Preferences/SystemConfiguration and restarted. Always impossible to add the interface, as mentioned above, it never appears.

  At this point, I am of ideas. Any help would be greatly appreciated.

  Thank you!

  Figured it out... it's driver Linksys USB3GIG crap that breaks the kext IONetworking signature.

  ERROR: invalid signature for com.apple.iokit.IONetworkingFamily, does not load

  After removing AppleRTL815 * from /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/ and restart, thunderbolt ethernet is back

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• iTunes has stopped working / Win10 64

  Hello

  I have a problem running iTunes on 64-bit Windows 10. (Lenovo Thinkpad Yoga 12)

  As soon as I click on the iTunes Store tab, the program crashes and I get the message "iTunes has stopped working, Windows is checking for a solution to the problem..." and after a few seconds he said "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  I have already tried:

  Complete uninstallation of all programs Apple, including the deletion of all files, and then reinstall it.

  If I do this, the installation fails. He tells me that the bonjour service cannot be started.

  That's why I opened archive installation with 7-zip and has just installed iTunes and support the application. That worked well, but I still get crashes.

  I don't know what else I could try and you'd be grateful for any help!

  Thank you and best what is the Switzerland

  Jonas

  The 12.3.3.17 version seems to cause problems for some people. It may be best to roll back to the last version of iTunes that has worked for you. then wait for the following. See the programs installation of iTunes to download links. If you're back from 12.3.3.17 to 12.3.2.35, then you must also restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library.

  TT2

• HPSF.exe has stopped working

  When I try to open HP Support Assistant, I get an error message that hpsf.exe has stopped working. Application has encountered a problem and needs to close. My warranty expired on 12/09/2012. HP Support Assistant disappears when the warranty expires. If this isn't what someone has an idea how I can fix?

  Hello

  It's nothing to do with your warranty ending, however this can be a fickle piece of software.

  Try the following.

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• Office Starter has stopped working

  This morning, after an undate to my computer at night (11/09/13), Microsoft Office Starter has stopped working. The icons for the changed document in generic (orange in colour) instead of word or Excel documents. When attempting to open a word document, a screen wanting me to buy Office.  All of the suggestions.

  Computer is a HP h8 - 1287c with Windows 7,

  Microsoft - link - how to repair Office Starter

  http://support.HP.com/us-en/document/c02981221

• computer keyboard HP laptop has stopped working

  my computer keyboard laptop hp pavilion has stopped working; can be used only on screen keybord - ideas?

  Use the warranty and contact HP. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• HP support Assistant has stopped working windows 8.1

  I use HP Pavilion 14-n059tx Notebook PC and upgrade to windows 8.1. I can't use HP Support Assistant. It says "HP Support Assistant has stopped working". Please give me the correct steps to uninstall and reinstall HPSA including the file to download.

  Hi MNFNaimem,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop and have the HP Support Assistant. Here is a link to uninstall the HP Support Assistant software. You can reinstall it here.

  I hope this helps.

  Thank you.

• HP Elitebook 8470 laptop PC - graphics Intel HD 4000 - GfxUI has stopped working - Win 7 x 64

  Hello!

  Since I installed the Intel video driver and Control Panel 8.15.10.2712 22 June 2012 (sp57420.exe) - later recommended by HP.com pilot for my Elitebook 8470 p / OS, I get the error message "GfxUI has stopped working" when you click on "Options and support" in the Intel graphics card and the Media Control Panel.

  Everything works well except this problem, forbidding me to access this menu.

  Some details of my system:

  -Laptop: HP Elitebook 8470p B6P90EA #B10 (16 GB of RAM)

  -OS: Windows 7 Ultimate x 64 (service pack 1)

  -J' have Microsoft.NET framework 3.5.1 active (default value of Windows 7)

  -J' installed Microsoft.NET framework 4.5.1

  Some attempts at solving problems (with no success), I did:

  -Uninstalled and reinstalled video driver;

  -Microsoft.NET framework 4.5.1 uninstalled and reinstalled the driver video;

  Can someone help me to solve this issue, please?

  Here is the response from the INTEL Support:

  I'm sorry to hear that have had problems with the Intel graphics driver.

  This problem has been reported previously, and Intel has fixed with the new drivers.

  Please see the link below for more information on your problem:

  http://www.Intel.com/support/graphics/sb/CS-009483.htm

  Here is the link for the latest video drivers:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23405 & lang = eng & OSVersion = Windows % 207% 20 (64-bit) * & DownloadType = drivers

  HP will update this version of the problem driver too, based on the INTEL update?

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• "Skype has stopped working" on 7.17 seconds

  "Skype has stopped working" on my laptop (Windows 8) after it is fine a few hours ago. I would like to start it and it would be nice, but when I click on something, it blocks a few seconds after you do with this error.

  I tried a few things like; Uninstalling and reinstalling, restart the PC, install a version previous (7.16) and rename and then delete Skype folder after the failure, but nothing works.

  Here is the information of the event viewer:

  Name of the failing application: Skype.exe, version: 7.17.0.105, time stamp: 0 x 56721832
  Name of the failed module: KERNELBASE.dll, version: 10.0.10586.0, time stamp: 0x5632da1c
  Exception code: 0x4000001f
  Offset: 0x001382e2
  Process ID vulnerabilities: 0x11ac
  Start time of application vulnerabilities: 0x01d142a55b26ce60
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
  Report ID: 69fc8a2a-2378-441e-b08d-1a4010a97494
  Faulting full name of the package:
  ID of the failed package-parent application:

  No problem detected when you run the DirectX Diagnostic tool.

  So I found a solution semi. If you don't mind go back to an older version of Skype, so that's what worked for me.

  Uninstall the current version of Skype - install an earlier version 6.14

  Link: http://Web.archive.org/Web/20140413131237/http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

  (This link is backup Skype msi installer)

  I hope this works for enyone to another having problems but Skype you need to get your act together. The number of people who have problems with Skype is ridiculous.

  Something to avoid problems:

  Be sure to turn off the automatic updates as much of the time, the new versions are what cause issues. I think better to wait a bit before updating.

  Tools - Options - Advanced - Automatic Updates - turn off automatic updates

• Pavilion g4: apllication of Catalyst Control Center: Host has stopped working...

  I get a pop-up window saying: "Catalyst control centre: host application has stopped working.". "

  It is written in the body of the box: "a problem caused blocking program woring correctly. Windiows will close the program and notify you if there is a solution. "
  
  I can't connect my games online as well. Please give a good solution

  Hello @Sailorswrath ,

  Thank you for your inquiry.

  What is your exact model of the Pavilion G4 you have?

  How can I find my model number or product number?

  There was a recent change before that happened?

  Have you tried running MS difficulty?

  Have you checked against viruses and malware?

  Here is a link to help test for a hardware failure.

  HP Notebook PC - detection of hardware failures (Windows 7, Vista)

  If it is a recent change, you can perform a restore to a well known date?

  HP Notebook PC - using Microsoft System Restore

  Good luck!