chipset NVIDIA Install 1 stick only with memory

Hello I have an abit nf2s "405 geforce" 6100 video onbrd set at 256 MB activate if no other motherboard and I always had to install vista 32 with 1 stick and stop 2nd installation in safe mode and msconfig boot stick to check the to 1532 MB of total memory box 2048 1gig each stick and check boot box okok permanent and restarts. Then I can install the nvidia 15,76 driver install nvidia vga nvidia 7600gs card stop and recognize windows and uninstall onbrd Videoo and restart and I would install the driver for the 7600gs card 195. ? and good to go I ran for a year and installed to sp2 has worked good. I do the same thing for windows 7. Abit is is closer and I have the bios more recent and tried different memory ran memtest for a month and msconfig was the only thing that stopped bsod and corruption and windows update failures if it would install by turning the memory down and all the options of memory off the coast, but I was wondering how a bcdedit and if it would be more correct.

cmd
bcdedit
bootcfg/raw /burnmemory = 512/a /id1

I did not quite right for orders, but if I new how to set this so I could remove my msconfig and the video memory part actions would be corrected, maybe, and I always install with 1 stick of memmory, and then do the bootcfg command with the second stick of safe mode setting. It's like the 256 MB shared video on brd was never properly defined for memory shared with the two sticks. I've always had to double this 512-2048 = 1532 mb and I was able to boot into windows and not the accident I even had a brd again exchanged 3 or 4 same thing years ago too. I could never use something windows disk after that who need to get the dvd burner to create a new recovery repair new disc.but start-up that he is recovering very well from windows restore point side.just restore from the first 4 or 5 restore points until completely installed for the 7600gs video card. Sorry I wrote a little book here, but I was just curious to know if someone could help on this thanks. Craig amateur

Hi Balittle,

In Windows Vista and Windows 7 the /burnmemory parameter has been changed to /removememory. Try to swap burnmemory to removememory achieve the desired effect and check.

For more information, see the article: /burnmemory: http://msdn.microsoft.com/en-us/library/ms791475.aspx

Thank you, and in what concerns:
Swathi B - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • I recently installed 4.0 only to find out it won't work with mac os 10.4.11. How can I recover my previous firefox or at least my favorites?

    I recently installed 4.0 only to find out it won't work with mac os 10.4.11. How can I recover my previous firefox or at least my favorites?

    You can get Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

    When you install it, it will use your existing bookmarks and other data from the user.

  • Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

    Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

    No. Windows cannot be installed on an external drive, or start from a.

  • I found a cd of OS Windows XP in the House who said for distribution only with a new hp or compaq pc, is it legal to install this on my pc tailor-made with a new product key?

    The Windows XP operating system disk

    I found a cd of OS Windows XP in the House who said for distribution only with a new hp or compaq pc, is it legal to install this on my pc tailor-made with a new product key?

    I found a cd of OS Windows XP in the House who said for distribution only with a new hp or compaq pc, is it legal to install this on my pc tailor-made with a new product key?

    No, it is an OEM drive and only good for the computer, it came with.

    If you have a valid license of retail XP but no installation disc:

    How to replace Microsoft software

    http://support.Microsoft.com/default.aspx/KB/326246

  • I did an installation 22.00 per month plan and can not install Photoshop, only with the lightroom

    I did an installation 22.00 per month plan and can not install Photoshop, only with the lightroom

    Hi Alex % 20arc,.

    You can troubleshoot Adobe Creative cloud download, install and update questions and we invite you to update the discussion in the case where you need help with this.

    Thank you

  • I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large

    I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large RAW from a Canon 5 Ds R. What should I do?

    You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • Lightroom 4 runs on a pc with Windows Vista SP2, Intel Core 2 Duo T8100 - 2.10 GHz-4 GB RAM - NVIDIA GeForce 8400 M GT with 256 MB of memory? THX

    Lightroom 4 runs on a pc with Windows Vista SP2, Intel Core 2 Duo T8100 - 2.10 GHz-4 GB RAM - NVIDIA GeForce 8400 M GT with 256 MB of memory? THX

    Vista is spec'd for Lightroom 4.  Check the requirements of the system through the following page:

    System requirements | Lightroom

  • CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

    CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

    CS6 does support OpenCL and OpenGL?

    Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

    Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

  • How can work with installed (RUN-MODE only)

    Jin
    I have request for export in mode single run of APEX online. Now I install this application offline with Upgrade XE with APEX in my machine.
    I XE upgrade and install an application in RUN Mode only. After installation it shows the INSTALLED APPLICATION but application is not EDITABLE.
    Tell me how I can work on this application runing mode.

    Hello

    Run the application and point the browser to URL
    http://127.0.0.1:8080/apex/f? p = app_id

    App_id, where is the number of your application

    BR, Jari

  • Creative cloud begins only with a white background, so I can´t install anything. My system Windows - 8.1

    Since today my creative cloud begins only with white background and nothing else. I reinstalled it twice, but the excists still problem.

    Thx for the help

    BP

    Hello

    Please try this-

    1 leave the CC desktop application by clicking on the 'Tools' icon (top-right) and choose Exit on the menu drop down.

    2. go in C:\Users\\AppData*\Local\Adobe and rename the folder to OOBE.old OOBE.

    Launch application Office CC again.

    * AppData is a hidden folder.

    Let me know the results.

    Concerning

    Dorin

  • Can I install Vista Home Premium with my product key?

    I have Toshiba Satellite A300-146, model No.: PSAJ0E, 1 GB RAM, Intel Dual core 1.87 processor, chipset Mobile Intel (r) 965 family with * vista home premium *...

    But it's in the recovery disk... If I install it, my hard drive will be formatted and become the only partition...
    If I install the vista Home premium (downloaded from the internet) and enter my laptop product key, * is it make real *... ?

    Hello

    To be honest, I don't understand what your question is.
    Why you want to install downloaded Vista Home Premium if you already have one with your laptop?

    Recovery image is complete with all the drivers, tools and utility, but if you install OS naked, then you have lots to installing of all Toshiba stuff in the hope, everything will be OK.
    Installation of recovery can be done on two tracks:

    Help of created recovery DVD *.
    In this case the whole HARD disk will be formatted and all your data will be gone, but you certainly get it with two partitions. Folder HDDRecovery there again on the second partition.

    * Using the recovery disk (F8) procedure *.
    If you do this just first partition (C) is deleted. All the data on the second partition will be there again.

    So please let me know what is your problem exactly and what you want to do.

  • Satellite L20-182: after installing the OS only USB 1.1 not 2.0

    Hello, I am an owner of the model Toshiba Satellite L20-182.
    Recently I did a format disk and installed Windows XP Professional with Service Pack 2.

    Unfortunately, the system detects USB as a version 1.1.
    I find anywhere USB 2.0 drivers.

    Could you help me?

    Hello

    Why suggest that you have only the USB 1.1 and USB 2.0?

    To my knowledge you will not find any special USB Toshiba drivers Toshiba page.
    Each unit of Toshiba uses the current Microsoft Windows USB drivers and it s not necessary to install the special USB drivers.

    I assume that you have installed the operating system from the original CD of Microsoft and not the Toshiba back CD. Am I wrong?
    In this case you must install all Toshiba drivers that are available in the right order. The chipset utility is very important! Generally, the chipset must be installed at the first stage.

    Please also check this Microsoft documents:

    Availability of the updated Windows XP SP1 USB 1.1 and 2.0
    http://support.Microsoft.com/?kbid=822603

    When you install Windows XP Service Pack 2, the USB 2.0 drivers do not appear to be updated
    http://support.Microsoft.com/kb/873169

  • (Redirected) if I do a clean install of windows 10 with 64 bit OS?

    I recently did a clean install of windows 10 using the tool of media (I updated to 10 before the clean install and used my product key). I noticed that he installed a 32-bit windows 10 OS. I believe that my laptop has a 64 core processor and I wonder if I should have installed a system of operating windows 64 bits instead of 32 bits. I also wanted to update my RAM memory, which now 6 GB (2,40 GB usable). I have 2 RAM sticks, one with 4 GB and one with 2 GB.

    My questions are:

    Should I do another clean installation with a 64 bit 10 OS?

    My laptop is able to do this?

    What is the maximum amount of RAM, this laptop can hold?

    Thank you!

    I list the specs I can find on my computer:

    Processor: Intel (R) Core (TM) i5-4210U u 1.70 GHz 2.40 GHz CPU
    Installed memory (RAM live): 6,00 GB (2,40 GB usable)
    System type: 32-bit operating system, x 64 processor
    Pen and touch: Touch Support with 10 Points of contact

    ' NWMX1 1 DUAL IN-LINE MEMORY MODULE, 4GB, 1600, 1RX8, 4 G, DDR3L, S.
    ' TX3GV 1 DUAL IN-LINE MEMORY MODULE 2 GB, 1600 1RX16, 4 G, DDR3L, S.

    CK4DP: MOD, SW, DPK, WB32/64
    Part number
    Quantity
    Description 1 DPK, operating SYSTEM, WB32/64 TMTN1

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Bev.

  • I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

    When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

    Information System
    ------------------
    Time of this report: 13/06/2011, 19:40:20
    Machine name: BEN - PC
    Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
    Language: English (regional setting: English)
    System manufacturer: HP-Pavilion
    System model: GC670AA-ABA a6120n
    BIOS: Phoenix - AwardBIOS v6.00PG
    Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
    Memory: 4096 MB RAM
    Available OS memory: 3582MB RAM
    Page file: 1690MB used, 5472 MB of available space
    Windows Dir: C:\Windows
    DirectX version: DirectX 11
    DX setup parameters: not found
    User DPI setting: 96 DPI (100%)
    System DPI setting: 96 DPI (100%)
    DWM DPI Scaling: disabled
    DxDiag Version: 6.01.7601.17514 64 bit Unicode

    Two monitors

    Display devices
    ---------------
    Card name: NVIDIA GeForce 7600 GT
    Manufacturer: NVIDIA
    Track type: GeForce 7600 GT
    DAC type: Integrated RAMDAC
    The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
    Memory display: 1768 MB
    Dedicated memory: 248 MB
    Shared memory: 1519 MB
    Current mode: 1600 x 900 (32 bit) (60 Hz)
    Name of the monitor: generic PnP monitor
    Monitor model: G205H (Acer)

    Card name: NVIDIA GeForce 7600 GT
    Manufacturer: NVIDIA
    Track type: GeForce 7600 GT
    DAC type: Integrated RAMDAC
    The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
    Memory display: 1768 MB
    Dedicated memory: 248 MB
    Shared memory: 1519 MB
    Current mode: 1280 x 1024 (32 bit) (60 Hz)
    Name of the monitor: generic PnP monitor
    Monitor model: NEC LCD7V

    Hello

    I suggest that you have watch the following link below:

    http://forums.developer.nvidia.com/index.php?showtopic=5331

    I hope this helps.

  • Is it possible for me to install Local DVD retailer with the product key?

    Original title: lost my product key.

    Hello everyone.

    2 years ago, I bought a Podium with a PC attached from a local retailer. He gave me a Windows 7 Pro Sp1 32 - Bit DSP OEI DVD 611 and the Podium and Win 7 was already installed on it. I have not found any key on or in the DVD box. No sticker on the PC or the Podium. He charged me $ 175, I'm from India up to 10 200 /-rupees for the DVD. Now I have to install this DVD on the Podium, or at least on my laptop. Is it possible for me to install this DVD with the product key or what should I do?

    Thank you.

    MS sells more than winxp or win7, you will only be able to buy peoples who have old stock or used, and it easily gives a copies pirated / illegal.

    The keys are not sold on their own, but only with the installation media.

Maybe you are looking for

  • What is sync?

    You talk about sync. What is it? What is this for?

  • How to download using mobile data instead of a Wi - Fi connection

    Dear Sir. I use iPhone 6s. I would like to ask for your help as to how I could use mobile data to download for the software updates. There was always a prompt message to inform that I could download when connected to a Wi - Fi network. Hoping to hear

  • Satellite L300D-243 won't charge or turn on.

    I have a Satellite L300D-243 with a dead battery. But when I connect it to the mains no lights turn on at all and it won't turn. Try with another charger and has worked for a few minutes then the same problem - she's dead and not coming back not new

  • Help to connect my machine embroidery Futura to computer

    Original title: I have a machine embroidery futura - it allows me to load the disc, but then when I click on it it icon it keeps telling me that the ubs cable is not connected Can't do the lap top to allow me to get to my futura embroidery machine, e

  • Properties servicepk3 and bluetooth XP

    Recently I got a mobile phone that dosnt Bluetooth usb dowload photos but uses. I'm trying to set up the computer to activate bluetooth frrom this new mobile. I use a dell optiplex 280 sff with xp servicepk3I ran searches and cannot find the bluetoot