Satellite L20-182: after installing the OS only USB 1.1 not 2.0

Similar Questions

• Satellite U500 freeze after installing the Nvidia display driver

  I just did a clean install of Windows 7 Professional 64 bit on my machine and tried to install the drivers from the Toshiba site. However, after the installation of the driver and restarted, the l' ordinateur computer seems to be ok for a few seconds and then the screen just hangs and I have to start cold in SafeMode so that it works.

  I tried to disable the Nvidia Driver Helper Service, but it does not at all help. The machine can only be started in safe mode. The laptop was originally with Windows 7 Home premium, 64-bit and it worked well.

  Someone knows this, and what was your solution? Thanks for your help!

  -----------------------------------------------------------------
  Satellite U500 - 18L PSU8CE
  Windows 7 Pro 64-bit
  NVIDIA Geforce210m

  Hello

  Have you installed other drivers on the Toshiba site, too? Such a question would normally be typical of 3rd third party drivers use
  Have you installed the drivers from the chipset first?

  Maybe you need to restore the factory settings. With these settings, everything is pretested and configured for more stable parameters.

• After installing the Vista SP2, IE 8 does not work well.

  After installing Vista SP2, IE 8 under my.live.com does not work.  The pages do not FLOW RSS download, links on the page at the top are not active and usually IE has out crapped.  I went to run a complete Internet security suite uninstall Trend Micro and put it in a plain Jane anit-virus program.

  I would like to keep the functioning of IE8, but switch to FireFox, if I need to see my RSS STREAM or do some serious web browsing.

  In addition, Live Messenger is no longer connect either.

  Is there a way I can safely roll back my system to SP1?  I can't live without Vista SP2.

  Hi Geekster,

  Please use the forum for Support of Vista,

  IE 8 is not a part of Vista SP2.  You can remove SP2 without removing IE8.

  Here are the steps to uninstall SP2
  Method 1: Uninstall the service pack of Windows Vista by using the programs and features item in the easiest control panel to uninstall a service pack for Windows Vista is to use the programs and features in Control Panel. To uninstall the service pack of Windows Vista by using the programs and features in Control Panel, follow these steps:

  1. Click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the programs list.
     If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  2. Click view installed updates.
  3. Click the service pack that you want to uninstall, and then click Uninstall.

     If you don't see the option to uninstall for Windows Vista service pack in the list, go to method 2.

  4. Follow the instructions that appear on the screen to complete the uninstallation.

  If method 1 does not allow to remove SP2, try different method in this article:
  http://support.Microsoft.com/kb/948537

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A200-13R: after installing the XP cannot use external microphone

  Hello

  I have A200-13R which comes with Vista Home Basic. Like most of my works under XP, I don't feel comfortable with vista. So I installed win Xp pro as a dual operating system. and I hv installed all the drivers downloaded from the Toshiba site.

  But when I use yahoo or other messengers system isn't identify if I plugged the external microphone. It uses only the inbuild mic with the system. I forgot to install something?

  Experts please help.

  Hello

  First of all there is no specialists but simply Tosh user ;)

  > I forgot something to install

  I put t think you forgot something to install. Only the audio driver is needed to get the sound and mic work.
  I presume that it s just a matter of adjustment.

  I recommend to check the microphone settings in the-> sound and audio devices Control Panel
  In the single tabs as audio and voice please check if the microphone has been selected.

  In addition, please be sure that mute mic worked in volume-> advanced-> control of the microphone.

  This will disable the internal microphone! To activate the external microphone, you must press the button advanced under the micro controller.
  In the new window called Advanced controls for microphone, you will need to activate select MIC2 and Mic Boost.

  Best regards

• I just bought CC for students. After installing the app Office CC he initiated not. There is a wheel to turn, but nothing happens. Already tried with the guys from access remotely, they've run the cleanup tool, but nothing. Any ideas?

  It seems that the app is not able to connect to the internet, so I can't install any applications. Help, please. Thank you.

  Hello

  Please refer to https://helpx-internal.corp.adobe.com/content/help/en/creative-cloud/kb/creative-cloud-app-ne-open.html

  Hope this Helps.

  Kanika

• Project created after installing the new update for CP9 does not not on Web server

  We upgraded 2 computers yesterday with the new update for 9 Captivate and that they will not play on our web server.  We have completed the upgrade of projects work very well.

  New projects are working fine locally.  I had to open these on a computer that has not been to level again and then make a new project and copy the slides in the new draft and publish it.  Then it works on our web server.

  Hi Susan,.

  Can you check with your Web server administrator that the list of permitted such MIME type entry for json files?

  It is a necessity with the changes in the recent update to HTML5 runtime. Please let me know if that solves the problem.

  Thank you

  Aditya

• Satellite L20 182 build antenna on the screen?

  I want to install a mini-PCI card to get WiFi in the computer of my, but I don't know if I have an antenna. Can someone help me?

  Satellite L20-182 isn't scalable WLAN. You can use an external solution just like PCMCIA or USB.

• Question about new BIOS on Satellite L20 182

  HI :)

  I have a question: can I install new BIOS 2.20 on my Satellite L20 182 model No. PSL2XE?
  If I can't, why PSL2X users do this? Are there differences in the two models?

  Hello and sorry for my English - I'n not the best :)

  Hello

  just for explanation: the bios you mentioned is good the machine bios. Toshiba is not writing the complete model number since there is a range of numbers of the same model, Don t so you need not worry, they are not different. Maybe the last digit, but it is not important to you.
  Why am I knowing this? Because many manufacturers are doing this and I've been several times confused when updating the BIOS from another manufacturer...

  Welcome them

• Should satellite L300-170 - I install the display driver?

  I have Toshiba Satellite L300-170 and I install Windows 7. When I go to the resolution of the screen (left click on the desktop) in the display writing "* display: display Mobile PC'* ' is this normal or should perhaps write" * Intel (R) 965 Express Chipset Family * "?
  What should I do to change this, if it's not good?

  When I'm working on Autocad 2009 go to work my laptop slow that he work on same autocad 2009 on Windows XP is only display driver or something else?

  Hello

  Normally in the graphic properties where you can change the resolution of the screen you can see the type of graphics card. Looks like you didn't install the display driver

  To verify the Web from Toshiba site to download the driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  After installing the driver, you might give us a feedback, what happened! :)

• Satellite L20-182: is it possible to upgrade processor?

  Hello. I have a Toshiba Satellite L20 - 182 and I want to change the CPU.
  My CPU is the Celeron M 380 (1.6 Ghz), and I want to install Pentium M.
  Can I do it?
  If I can, can what Pentium M I install on my motherboard?
  Please answer me.

  Sebastian K., from the Poland

  Hello

  Well, in general it of not possible to upgrade the processor.
  Some processors are fixed mounted on the motherboard.
  In addition, the processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a permanent connection method and is used in the interest of miniaturization and heat dissipation

  Just for info:
  I found some Satellite L20 units which are supplied with different processors.
  For example:
  Satellite L20-204 Intel-Pentium-M (Dothan) 750 1.86GHz
  Satellite L20-214 Intel-Pentium-M (Dothan) 740 1.73GHz
  Satellite L20-300 Intel-Celeron-M (Dothan) 370 1.5GHz

  Best regards

• Minipci WiFi on my Satellite L20 182?

  Hello!
  I have Satellite L20 182 without wifi card, but I want to install a. I started minipci location but I put t know if I antenna pre-installed. When I ve looked under the guise of minipci slot. I found 2 wires (red and black), but they seem to be connected to something. Are they son form antenna?
  If Yes, could someone explain to me how to install the card and what type of wifi card to buy, please?

  No, it is not possible to update and use a minPCI wireless network card in this s notebook.
  If you want to use WiFi technology and WiFi, then you must switch to an external solution such as a USB WiFi key.

  There you can choose between different modes of WLan such as 802. 11A, B, G

• Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

  After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

  Zbynek

  P.S. Here's the screenshots for the two problems:

  http://astrofoto.euweb.cz/tmp/black_stripes.jpg
  http://astrofoto.euweb.cz/tmp/color_boxes.jpg

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.

• Satellite L20-182 (PSL2XE) & 120 GB HARD drive upgrade

  HELO :)

  I'm going to buy a new HARD drive and I think that about 120 GB but I.m not sure if it works in my L20-182 (PSL2XE). The user manual says:
  + "Available in four sizes: 40, 60, 80 and 100 GB." Other drives may adopted in the future. "+ Is - anyone of you tried to put 120 GB? It work? Need BIOS update?

  wooytson

  Hello

  The user manual says that you can use up to 100GB HDD for sure.
  I think the tough have not been tested on this notebook L20 and it seems that we can only speculate whether it is possible or not.

  The problem is that the BIOS supports a HARD drive size limitation. So not all HARD drive sizes are supported. In the worst cases, the BIOS does not recognize the HARD disc.

  However, I think that you can test. There is a great chance that a 120 GB might work properly!

• I can't log on windows 7 as an Aministrator user after installing the update of security for windows 7 KB2286198.

  When I connect windows as Aministrator, error massage "service user profile Service has no logon. User profile cannot loaded bo"appear. I'm only allow Windows to logon as a Standard user. Started as a Aminstrator I need to restore my computer (only in safe mode) at a time before installing the KB2286198 update. How to open a windows 7 mormally Admin user session after installing the update of security KB2286198?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.