choice of the "right" IRB

Similar Questions

• By selecting the right 'Complete Solution' for CM1312 nfi MFP CC431A HP Color LaserJet

  I am a CM1312 nfi MFP (CC431A) and load the software to connect it to my Win 7 Home premium (32 bit) machine.  There are 4 different "solutions" to choose from and no particular direction that I can find to choose the right pair.  All descriptions are similar.

  Can someone give me advice in the choice of the right version?

  Best regards and thanks,

  Jordan of Vermont

  I found success in uninstaling all drivers and then put it back.

  Annoying but ultimately effective.

  Thank you!

• Help the CBO to make the right choice

  Hello everyone. I have a related question performance. I would like to hear your opinion on this. Here's a simple query on the transactions table:

  SELECT
       *
  FROM
       transaction t
  WHERE
           t.transaction_method_type_code = 'CREDIT'
       AND t.process_date BETWEEN TO_DATE ('11-MAR-2015') AND TO_DATE ('12-MAR-2015');
  
  

  

  Oracle chooses an index based on the process_date column. I think it's good. When we increase the oracle interval follows a different route:

  SELECT
       *
  FROM
       transaction t
  WHERE
           t.transaction_method_type_code = 'CREDIT'
       AND process_date BETWEEN TO_DATE ('11-MAR-2015') AND TO_DATE ('29-MAR-2015');
  
  

  

  Which is understandable, because in this case, transaction_method_type_code is more selective. But real-time direct, we do not hardcode those dates, keep us in a table.

  SELECT
       *
  FROM
       transaction t JOIN cntrl_process_date ON process_date BETWEEN previous_process_date AND current_process_date
  WHERE
       t.transaction_method_type_code = 'CREDIT';
  
  

  

  Oracle chooses is no longer the right index finger, even if the difference between the dates of cntrl_process_date is always a day. I can still understand it because he has no idea of CBO are than the actual data. Bind picking concept is not applicable here.

  I tried to help CBO by adding a constraint on a cntrl_process_date but it did not help:

  ALTER TABLE cntrl_process_date ADD CONSTRAINT cbo_please CHECK (current_process_date - previous_process_date = 1);
  
  

  Is it possible to help CBO with good choice next to the addition of an indication?

  Thanks to you all. I appreciate your time.

  No version, so hard to give the best advice. and I think you need to get the Note 'plan_table is old version' since we do not see a sign of the section of the predicate.

  One possible strategy - from your Control Panel has a line:

  Add a primary key to the table - even if it's through a meaningless key column (holding, say, a value of 1), then change your query to:

  Select * transaction t

  where process_date between (select previous_process_date in the cntrl_process_date where primary_key = 1)

  and (select current _process_date of cntrl_process_date where primary_key = 1)

  ;

  When subqueries are subqueries in single line based on known unique (for example, the primary key) the optimizer evaluates the subquery then optimise the main request - but only in the latest versions of Oracle

  Concerning

  Jonathan Lewis

  UPDATE: just saw your version number - somehow, it became visible only after I wrote my response.  11.1 is too old.

• Timed sequences. Is this the right choice and how it works!

  Hello!

  I am a newbie in LV, and I am creating a VI that is able to fly a small filtration unit I have build in my engineering studies.

  I have to control three magnetive valves which are connected to the Do0, Do1 and Do2 digital output on my USB 6009 MyDAQ device port.

  I have to control the sequence in which the valves open / farm as to avoid damage to the sensitive som of pressure transmitters. How to program a sequence of controlled time that opens and closes the valves in the right order, and in order reverse, repeat the sequential once a user defined timing?

  I have looked at the 'timed sequence' but could not find a "down to earth" description on how to use it.

  Perhaps my problem is a little in general. In this case I can certainly help with precision if necessary.

  I hope someone can help me with my problem. Now, I spent 6 hours looking at different tutorials without a bit of luck.

  Thanks in advance

  Henrik

  
  

• How to read the message on the right not on the bottom?

  I used to use outlook and message read on the right, in the Middle, and messageliste message shows right. Not sure that Thunderbird can do this and how to put in place. Looking forward to the professional response. Thank you.

  Layout view select one of the 3 choices.

• all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

  I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

  Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

  If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
  http://www.eightforums.com/

• How can I get Yahoo the right click menu where I'm looking a word Hi-lighted?

  If I have hi - lite one word to the right, and then click the menu drop-down says Yahoo search for...
  I don't like Yahoo and don't want that on my browser.
  I would use a search engine of my own choice.
  Thank you.

  This item in the context menu uses the default search engine as shown in the search bar in the Navigation toolbar.

  • https://support.Mozilla.org/KB/search+bar

• do not click on the menu that appears when I right-click my taskbar, such as the right click menu disappears when I move the mouse the right click menu

  PROBLEM: CONTEXT MENU DISAPPEARS WHEN YOU TRY ON THE LEFT, CLICK AN OPTION

  Hello
  I'm using Windows 7, and I could always
  go to my taskbar and right click
  Icons and active icons, bring to the top
  the list on the right click on the standard Menu.

  PROBLEM
  As soon as I moved my mouse away from
  the background of windows 7 taskbar to go a couple
  millimetres above on the left, click an option in
  I opened with my right click context Menu
  The whole Menu disappears, and it happens in
  Firefox version 29.01, other programs in Firefox,
  and others such as Skype.
  When I was running Firefox 28
  I didn't have this problem, can you help out me.
  Thank you
  Kev Borg

  PROBLEM
  MAKE ONE CLICK RIGHT MENU DISAPPEARS WHEN YOU MOVE YOUR MOUSE TO THE LEFT, CLICK ON A MENU OPTION IN THE RIGHT CLICK MENU.

  'YOU can not because WHEN YOU MOVE YOUR MOUSE TO THE MENU YOU JUST a RIGHT CLIC ON OPEN DISAPPEARS before you HAVE a CHANCE TO CLICK LEFT of YOUR CHOICE. "

  SOLUTION
  [ 1] GO TO control PANEL AND click HERE FOR the VIEW MENU
  [ 2] GO to "EASE of ACCESS CENTER" AT the TOP.
  [ 3] LEFT CLICK ON the MENU ITEM "theEASE of ACCESS CENTER.
  [ 4] AFTER YOU are a LEFT CLICK ON 'EASE of ACCESS CENTER' seems.
  [ 5] LOOK down THE LIST UNTIL YOU FIND to "MAKE THE MOUSE EASIER to USE".
  [ 5] THE UPPER SHOWS YOU HOW to CHANGE YOUR MOUSE COLORS ETC.
  [ 6] SCROLL DOWN UNTIL YOU SEE THIS TOPIC "MAKE IT EASIER to MANAGE WINDOWS".
  [ 7] UNDER this MENU, there is check.
  "ACTIVATE a WINDOW BY HOVERING over IT WITH YOUR MOUSE"
  

  [8] ARE OF COURSE IS NOT A CHECK MARK IN THIS BOX TO OPTION, IS THERE A CHECK IT AND APPLY AND CLICK OK TO SAVE.
  

  And now, you should have no more problems with your right click Menu disappears when you move your mouse over the menu left click on a menu item on a right click menu.

  SOLUTION SOLVES THE PROBLEM.

  Thank you and I hope this answer help all the other people who have had this frustrating problem.

  was soon KiwiKev

• What happened to 'bookmark this page' selection in the menu "Show bookmarks" on the right?

  Now, I have to:
  1) click the Blue Star stupid to get the menu to place my new bookmark where I choose to do instead of going to unsorted bookmarks again...
  OR
  (2) raise or having the menu bar and click on the menu choice "Bookmarks" to "bookmark this page", which shows what I would call the menu choice or sorting which allows me to access my bookmarks menu...

  .. where I wanted to go to a bookmark, AND I get to select 'choose', which is what I used to do when you add a bookmark.

  I want the selection 'bookmark this page' return on the "Show bookmarks" list on the right... where it belongs. Why everyone wants to keep hide useful tools?

  29 Firefox STINKS and I got in trouble from the beginning... and since the mistake of reset.
  I now have a record of things that I have no idea what to do what while resetting, I got "Oooops it's embarrassing, we have a problem" or something. Clues about what to do with all these 'junk' (now to me) might also be useful.

  You can press Ctrl + D if you still want to see the popup Page Bookmarked.

  The following add-on makes bookmarking easier in different ways. Among other things, he is able to remember the last folder.

  • https://addons.Mozilla.org/firefox/addon/add-bookmark-here-2/

• How to get rid of the new menu button on the right side of the toolbar

  Honestly, I don't know why the developers cannot offer new features that we can use or not, by choice. Instead, things are forced upon us.

  Could someone tell me please how to get rid of the new menu button on the right side of the toolbar?

  It doesn't seem to be an option to remove via the Customize Toolbars window.

  Thank you very much.

  CTR extension makes Firefox customizable menu button 3 bar, so you can drag this button in the palette to customize to remove it from the Navigation toolbar.

  Reload and stop probably combine only if you set the two buttons in the correct order (reload - Stop and non-Stop - Reload)

• When you use Itunes on my Ipod Touch 5 generation, the Ipod is no longer automatically past from one song to another. This seems to be a novelty. There is a button on the RIGHT side of the upper third of the screen where you can choose options but go n0.

  When you use ITunes on my Ipod Touch 5 Gen, running IOS 9.2, he has recently stopped automatically switch a song on one album to another while listening to ITunes. I discovered a button with 3 points to the RIGHT side of each title of the song which, when typed gives a different options for example then played, add up to the next etc.. If you use these all this seems to get worse with more choices that appear. I know that sounds incredible, but I have owned several Ipods that I use just for listening to music. Mine is a 32 GB version that can store a large number of albums, most of which I bought and loaded into my Ipod. A few albums that I downloaded from ITunes. How can I get it from my Ipod to listen to music in the ITunes application without having to select one of the 55 options?

  See if the chapter of the music of the Manual:

  http://help.Apple.com/iPod-touch/9/#/iph3bd017b9

  Next:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• I lost the favorite icon on the right side of the top menu bar.

  I used to have the star on the right side of my head at the top of the page. Somehow he disappeared and I can't restore it. (I still unrolling of bookmarks in the menu bar, it's not what I'm missing.)

  Experience the exact same skin like the original, very confusing and annoying poster.

  So the specific solution is a three step process:

  1 HIDE THE MENU bar by unchecking in 'View' - this gives you the orange Firefox button. NOW, you will automatically also review our beloved Bookmarks menu drop down to the right of the search box! Yay!

  2. think to famiiliariser: why can not I have the Menu bar (with "bookmarks" in there) AND the drop-down list of bookmarks in the Navigation bar? WHY? Redundancy is MY CHOICE if I want. And I do. User can choose the features on the navigation bar regardless of what is on the other bars. (Obviously). Programmers cannot make important choices for users of these things. Programmers are terrible to the user interface design and must be kept off it aggressively. A separate team should make the design of the user interface and protect it from programmers.

  3 use the links in your comments about re-designers of Firefox 'smart' to please LEAVE THE CONTROL INTERFACE ALONE. When 1 billion people get used to things being a certain way and they like it more or less like this, and change you it, it means that 1 billion people will have 1 billion hours of frustration and anxiety trying to figure out what the f happened to their trust, beloved the button or the menu. You have not the right to inflict this suffering - leave it alone. The user interface is to the users - NOT for programmers. If it's not broken, don't FIX IT!

• W510 can not put primary monitor on the right

  I have a W510 in MiniDock Plus series 3. The operating system is Windows XP.

  I can activate my external monitor using the NVIDIA Control Panel. The page "Set Up several screens ' allows me to extend the desktop as 'A large horizontal Desktop' or 'configured independently.

  Using "Set apart" it is possible to choose either "laptop display + external" or "external + computer laptop display.» The screen that appears first is that logically on the left.

  Underneath, there is a distinct choice for the main screen of Windows.

  Because my office is configured with the laptop on the external monitor to the right and the left, I want to have ' laptop display + external ', with 'external' as main display.

  Among the four possibilities, it is one that does not. When I choose the laptop on the left and the external as primary, the laptop is always a priority.

  If I choose as the main external, can I have the phone as secondary, but it is logically to the right, but physically to the left. So to move a window to the left screen I have to drag it out of the right. I can not physically reconfigure my workspace to bring the laptop to the right of the external display.

  What Miss me?

  This seems to be a bug in the NVidia (3.3.452.15) Control Panel. It cannot apply the correct setting.

  The solution is to change the position of the monitor using the windows display settings tab properties drag the monitor icons so that the '2' monitor is on the left. Then it will be applied correctly, and the NVidia control panel will be able to read the configuration.

• Choose the right power supply for hp P6180t

  Hi I'm going to buy a new power supply soon for my HP pavilion p6180t desktop computer and I started a 300w to the corsair cx750 power level. I also want to get a new graphics card soon something in the mid-range. I was wondering if this power supply is the right choice, or if its too much for my computer because I read in another forum that you do not want a power supply with a lot more power you will actually need. For a gtx 660, the minimum is 600w I think so I wanted to just make sure that the power supply is the right choice for my computer. Thank you

  In fact, I think that the minimum for a gtx660 is 450w. I think a 750w for this computer is excessive. A 500w would be a lot. But if you buy one with too much power is just a waste of money it actually will not cause a problem. Like putting gasoline in an engine that doesn't need only regular.

• error message "Windows Explorer has encountered a problem and needs to close" on click with the right button in my computer

  I had this problem for awhile now.  After I receive and send the error report my computer is blocked and I have to finish by WTM. I tried to start in safe mode and it was ok there and when I restarted in normal mode it was ok for the rest of the day, but when I put the computer today the problem reappeared. Dr. Watson is also sometimes with an error message.

  I am running XP with MS and updates.

  Would appreciate some advice.

  Chris

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.  In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

  Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.