Chop the text off a chain

Similar Questions

• Dynamically change the color of the text substring

  Hello!

  I'm working on a simple serial terminal and I would like to change the color of each line depending on whether the message is sent or received. I have an indicator of string in which I add all messages, sent or received.

  My problem is that when I change the color of a substring by using a property node, all the text in my chain indicator changes. Here is a small Video that shows my problem (my real VI is a little too big to put here but the part of string works the same. I concatenate, keep the clues and apply the property node):

  Result:

  

  Any idea on how I could change the color of the new line? It seems the selection doesn't really work, because everything in the chain takes the new color.

  Thanks in advance,

  Tim

  PS: I've seen a web-based solution in which the property node must be extended for every line, of course it does not work for me as the number of lines changes dynamically.

  The problem you have is that the string contains no format information and it does not keep the indicator.  You will need to set the font.color in each line, each time you receive a new message.  See my post here - http://forums.ni.com/t5/LabVIEW/Different-fonts-in-string-indicator/m-p/1601602/highlight/true#M5823...

• How use the serial port read and display the text but not scroll off the screen?

  I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

  What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

  Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

  Thank you

  Steve

  A long shot.

  Is that what you want?

• Check the text in AS3.0 chain

  So for my Flash class at school, I do a game, this game has a keyboard in there that if you enter the right code it unlocks the door. I have most of it down, but am still confused.

  So far, I have a dynamic text box and when you press the keys I use appendText() to add the number in the text box. There is a button that turns off the box and a button to enter the code.

  buttonEnter.addEventListener (MouseEvent.CLICK, codeCheck);

  function codeCheck(e:MouseEvent):void {}

  If (KEYPAD_TEXT.text == num1, num2, num3 + num4) {}

  keypadUnlock = true;

  trace (keypadUnlock);

  }

  else {}

  KEYPAD_TEXT. Text = String ("Invalid");

  trace (keypadUnlock);

  }

  }

  Is the code that I use currently, if I click on the button enter right now does not tell me the code is invalid weather code is right or not. It's because I don't know how to check what is actually in the text box. So if the right code is 1234, and I type 1234, how can I do the fi statement check weather or not the chain said 1234 so that I can set my keypadUnlock to true and unlock the door?

  If you need more information please ask.

  use:

  kglad wrote:

  use:

  buttonEnter.addEventListener (MouseEvent.CLICK, codeCheck);

  function codeCheck(e:MouseEvent):void {}

  If (KEYPAD_TEXT.text is {String (num1) + String (num2) + String (num3) + String (num4))}

  keypadUnlock = true;

  trace (keypadUnlock);

  }

  else {}

  KEYPAD_TEXT. Text = String ("Invalid");

  trace (keypadUnlock);

  }

  }

  p.s. Please check the useful/correct.

• How can I turn off automatic layout the text bold?

  Expensive, most of the sections of the text in the e-mails I receive are in bold and when I responded to emails or compose new messages, I'm unable to disable the 'fat' of the text layout.
  How to turn off the text bold (in the newly composed emails) and restoration of the emails already received for their original style of the police (with bold text appearing only case provided by the sender)?

  Thanks a lot-Toad Hall. I followed your advice and it seems to have worked.
  Thanks again

• Is there an easy way to add text to a chain control / indicator and keep the colors

  Hello

  Bassically I want to add text to a chain control / indicator without losing the formatting of the previous text.

  For a part of a program that I create, data will be transmitted to and from a serial device. I want to display this data in a chain control / indicator and change the color of the text of certain strings depending on data type (sent, received). Basically as a nice log window.

  

  At the moment, I update the chain control / indicator by reading the text and concatenated with the new string. However, this method removes the colors of previous text :-(

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  I started to create a sub vi who reads a text both character and adds a new element in an array (offset color and text), if the color is distinguished by the previous character. Only problem is it seems to be quite time CPU.

  Thanks in advance,

  Matt

  MattB-5906 wrote:

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  Actually, no. This means that you will have to use workarounds. Your workaround solution seems a bit involved. Basically, all you need to do is just to keep track of the pairs of end start/selection selection that must be colored in a table. Then just you loop in this table to color the text marked by the power positions.

  An alternative is to use a different indicator. Rather than an indicator of the string, you can use a table with a column. You can then set the foreground color on a cell by cell basis, and add a new line (row) will not affect the coloration of the previous lines.

• BoolText.text how to give several channels (on the text and off text)

  How can I automatically change the text 'on' and 'Off' a Boolean value text. In the node property, I found BoolText.Text but how to use it to give power and text turn off? Thank you

  Hi TDE_CH,

  You can use the property '[4] Strings' to define these texts or you right-click on your control and use the Properties dialog box to change it.

  Mike

• White space removed while the text is cut off from its position

  Hello

  I am facing a problem in InDesign CS4 or later demand.

  I have a text like:

  "The physical state in which a polymer may exist can be idealized by first examining a string of very long, regular polymer. .

  {{1 AQ}}because these properties are dominated by the extreme length and chain - like structure of these molecules and not by their actual chemical composition. »

  When I cut the text {{AQ 1}} of the paragraph, the space before the text is deleted and becomes as below:

  "The physical state in which a polymer may exist can be idealized by first examining a string of very long, regular polymer. .

  The reasonis that these properties are dominated by the extreme length and chain - like structure of these molecules and not by their actual chemical composition. »

  Can I get any solution for this problem.

  Thank you

  Gopal

  In text preferences, check that this preference is turned on: adjust space automatically when cutting and pasting words.

• Turn off the text field (always submits page when you press enter)

  I have an area which allows you to enter search criteria. There are two fields and a button. The 1st field is a selection list that gives a list of columns in a database that can be searched on. The 2nd field is where the user enters the value to search for. The user can submit the search in 2 ways. They can press the button or press return when the cursor is in the 2nd item that is a text field (always submits page when you press enter). The results are then displayed in a region of report below.
  
  The problem I have, is that if the request is for > 10 seconds and the user gets impatient and hits the Enter key or the button search again the query is returned for a second time (or third or fourth according to the impatience of the user) causing the claim on the basis of data with a negative impact on the performance of the system.
  
  I know how to handle the search key. On a click event on I turn off the button so that the user cannot click on it again and resubmit the request.
  
  My question is - how can I turn off "always provides a page when you press enter" text item when the user presses enter? I tried an onclick event, but disabled the front element I could type in anything. Onblur event does not seem to do anything.
  
  Any ideas would be very appreciated.
  
  Andy

  Hello

  First of all, one thing to try: attributes of the Page, there is a section for the presentation in double - try setting this option on no.

  Otherwise, using the text field type, adds the following to the INPUT tag:

  onkeypress="return submitEnter(this,event)"
  

  which means, you can call your own function of javascript on the onkeypress event, the final line would be call submitEnter(). But you can set the value of a hidden page element:

  function doEnter(t, e)
  {
   if ($x('P1_SEARCH_RUNNING').value == 0)
   {
    $x('P1_SEARCH_RUNNING').value = 1;
    return submitEnter(t, e);
   }
   else
   {
    return false;
   }
  }
  

  Then, after changing your element to an element of normal text on the attributes of HTML form elements, add in:

  onkeypress="return doEnter(this,event)"
  

  Andy

• I see that a small part of the text in the url bar, the rest is cut off.

  Recently, my url bar displays only the first handful of letters in my url. If I use the arrow keys, I can see all the text is there, and hit enter brings to the top of the right-hand page, so is not cut the text, just the screen. About the first 15% of the present url bar text, while the bar remains is just gray. I am currently on 16.0.2.

  This may be a problem with AuthenTec TrueSuite.

  See:

  • [937571/questions/937571] Firefox address field to hide the last part of the address when loading

• How is - what change you the text in the tear-off tabs?

  Hello.

  I just learned how to make tabs of tearing up doing a content frame and place it in a frame containing, I tested it and it works fine.

  But I would like to change the text on my label to pull-out of work, but it is not visible. Sorry if there's a really obvious answer, I tried to experience and internet research, but how to view content frame so I can edit the content?

  Easiest is to select it in the layers panel, and then use the editor mode.

• Table header row gets cut off from view when the text block is resized

  I'm designing a table that has a header row, 6 body rows and 5 columns. I want the header skewed to 20º and rotation type of needles from the same angle. Knows someone who worked with tables, it is not possible to rotate the text to this value via the parameters of the cell, but the job is to split the table into two blocks of text. The lower sash will be the body lines, but the Executive must have the header where it gets skewed to the specified angle. The text must be created in separate and then cut and paste frames in each column header and then it can be rotated.

  The problem I have is when I try to drag the bottom of the text block to the top while the header remains visible, the header gets cropped view. The only way to prevent it from is Cup is I leave the first line in the frame, but then it gets skewed is not what I want. It seems that the block of text ignores the header still exists. The screenshot below has two tables. The top version is the one that I want to apply the effect to. The bottom has the effect, but his top line is a line of body (not a header).

  

  I don't think that it is possible to have a heading row without at least a body line in the framework...

• Turn off the text box with calendar

  Hi, how can I set it so cannont users enter text in the text box next to the date picker? This way I can make sure they choose a date invalid.

  Hello

  One way is to add article attributes of HTML form elements

  onfocus="blur()"
  

  BR, Jari

• Turn off the text box with the value of the checkbox

  Hello people,
  
  I am trying to activate or disable the text box with the value of the CHECKBOX, I have got the same thing with the BOX of ELECTION, with the javascript as follows: -.
  
  HEADER HTML
  ----------------------
  < script type = "text/javascript" >
  function disableOnValue (o)
  {
  If (o.value == 'Y')
  {
  document.getElementById('P2_TEXT_BOX1').disabled = false;
  document.getElementById('P2_TEXT_BOX2').disabled = false;
  document.getElementById('P2_TEXT_BOX3').disabled = false;
  }
  on the other
  {
  document.getElementById('P2_TEXT_BOX1').disabled = true;
  document.getElementById('P2_TEXT_BOX2').disabled = true;
  document.getElementById('P2_TEXT_BOX3').disabled = true;
  }
  }
  < /script >
  ---------------------
  
  under region Source whose Point display is < b > before < /b > foot and sequence is the last sequence of the entire region
  ----------------
  < script type = "text/javascript" >
  If (document.getElementById('P2_RADIO_BUTTON_0').checked is true)
  {disableOnValue (document.getElementById('P2_RADIO_BUTTON_0')) ;}
  on the other
  {disableOnValue (document.getElementById('P2_RADIO_BUTTON_1')) ;}
  < /script >
  ----------------
  
  and finally, to the title of point RADIO_BUTTON, HTML Form element attributes: -.
  -----------
  OnChange = "JavaScript:disableOnValue (this); »
  ----------
  
  the thing above works very well with the help of the RADIOBUTTON, but I want to try same thing with the CHECK_BOX I also tried a few changes but did not have any success so if someone help out me even that will be great and appreciated!
  
  
  Thank you
  
  Kind regards
  Kumar

  I also have the following in the Footer region region:

  <script type="text/javascript">
  x($x('P12_CHECKBOX'));
  </script>
  

  This is just to make sure that the items are disabled when the page is loaded, because the checkbox is deactivated

  Andy

• FCP 10.2.3 show buttons do not appear in the TEXT

  It has been on and off for a while. The button "show", modifiers, to the right of the drop shadow, face contour,

  etc., in the TEXT box disappeared. When this has happened before, I will re-start FCP and everything should return to normal.

  Now, that will not help. I tried to download a new FCP and that did not help. It is an i7 iMac end 2012 Sierra running. I was also see a large number of "beach balls" lately. Any ideas?

  The buttons disappear are a problem for Sierra. They are actually there if you know where to put pressure.

  Cannot help you with the beach balls. Do not see that.