Chromebox: Chromebox connection requires two attempts

Similar Questions

• most Web sites and links require two attempts to load

  About 50% or more of the time when I click on a link or go to a
  bookmark or website
  I get a failure message - Firefox can't find the server.
  and have to 'Try Again' or reload.
  It started only since I have version 8 (I now 8.0.1)

  This does not happen in Chrome - so it doesn't seem to be my
  connection to the Internet. But it happens now in all versions of Firefox.

  It is is irritating (5 weeks) of having to load each Web site twice.
  They always come up through the suite - is not the individual
  Web sites.

  He seems to have been that the exception of Firefox in my firewall settings has been removed somehow. Why is it so complicated?
  The opener troubleshooting for Firefox should list the first 30 things to check. The list
  should appear in the face of every beginner and non-tech out there.
  In any case – things seem fine now.

• H8-1414 requires two starts to work

  The office (HP Envy H8 1414 with Windows 8), fully updated requires two starts.   When first started, the powers of the computer on the scope that the monitor is "on", although showing nothing and the led on the front panel display, and fans lights.  The hard drive do nothing and the system just dists here.  No keyboard entry has an effect any.

  Hold the power button to force a stop work, and then a subsequent start works perfectly without any problems.

  It seems unlikely that one sitting poorsly something or other, whether because he is not an intermittent problem, but exactly the same problem each time.

  Most likely culprits soom to be a feature of the BIOS which restores a certain way with the company of dual boot or shutdown of Windows 8 problem.  Since there is no entires in the linked to stop Windows system event log, and the hard drive is not turn, I'm inclined to blame the BIOS.

  I understood that there was a kind of a hard drive BIOS registration system security function-maybe this is related to the question, but I can't get to any arrangement that may have an impact on this.

  I had to restore the complete system using a system image (reformatted and reinstalled the partitions C: and D: time) after it went crackers (technical term) as a result of recent updates to Windows.  (System Restore seems to work perfectly to include questionable updates, but for the dual-boot question which may or may not be connected).

  I have reset the BIOS via the pins of the jumper on the motherboard - no effect.

  Did you try a live CD of Ubntu ultimately to test the DVD\BD writer?

  Are you aware that the DVD drive and the hard drive are the two elements that can be replaced without charge to you the one year warranty?

  Your office equipped with a release of 27-Sept-2012 market so far. This means that it is probably still under warranty.

  Warranty status check the web page.

  Contact HP for warranty repair.

  Kind regards

  ERICO

• How to create a Pool of connections to two different databases in OBIEE

  Hello

  I have a requirement where few reports coming from databases and a few others to another database. I created two pools of connections and added the frame connection details. But when I created the report I get error as below.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 17001] Oracle error code: 942, message: ORA-00942: table or view does not exist to the call of the OCIStmtExecute OIC. [nQSError: 17010] Prepare the SQL statement failed. (HY000)

  Now, I would like to see if I can create a pool of connections to two different databases. If so, how that happen.

  Thank you!

  Hi Antonio,.

  Cross database joins are possible, no problem for it. But you do not do so in an object of unique data base in the physical layer using 2 pools of connections connection to the source A and B, then adding objects to A and B children of your unique database.

  You create 2 databases in the physical layer, each with its own connection pool, then you can do your knuckles crossed on the physical schema.

  As a picture is worth a thousand words, take a look:

  

  The physical diagram uses objects of A and B and define the rules of the join between them, it is a cross-database join. But in the physical layer of the database A and B are 2 separate objects each with its own pool of connections.

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• Can damage the FPGA module if I connect accidentally two pins writing together.

  My current configuration has a PXI chassis with two FPGA modules.  Each FPGA module has an adaptation Module 6581 on that.  I would like to test the signal through my system path by having the user to move some cables that would be a reason for a return to the other looping FPGA.

  I fear, however, the risk of the user is not correctly as shown and somehow a channel available in writing that connects to another channel write-enabled.  This damage to the FPGA or adaptation modules?

  Hi Brian,.

  Your concerns are correct. We never want to connect two pins that are output voltage. If two pins are outputs digital mistakenly connecting them together may damage one or both nodes in output since there is nowhere to flow the potential.

  It is well to connect to two pins that read a voltage. If both pins running entry digital (reading of the pins), as there is no risk, nor pin would be likely to be damaged.

• Internet connection required: Server error: 0x800CCC90, error number: 0x800CCC92

  Original title:

  Windows Mail in Vista

  Can anyone help please.  I tried to open my email this morning - as usual - and it asks me to enter my username and password.  I did it several times but it won't let me and I get as part of the error message: -.

  Internet connection required: Server error: 0x800CCC90, error number: 0x800CCC92

  I have been in contact with the technicians at Microsoft, but apparently they are more supported Windows Mail.  I can access my mail through my e-mail provider, but it's really annoying!

  Internet connection required:

  This has not preceded by a long and complicated URL that begins with https://accounts... ? The idea is that you must click on the link to log in and verify that it is access you your account by filling out a CAPTCHA. Is that what you did? That's happened?

• The smartwatch can connect with two phones

  I am looking to buy Sony smartwatch, and since I have two android phones, I was wondering if it would be able to view the notifications from two phones?

  See you soon,.

  Dimitar

  Smart Watch can not be connected to two phones at the same time. So it will not be able to view notifications from two phones.

  What are your thoughts on this forum? Let us know by making this short film survey.

• Connectivity between two piles of Dell 2048

  Hi guys, I'm very new to the configuration of the switches. We have a small office and just implement a new data room. We have 4 switches of POE Dell 2048 x stacked for VOIP and PCs phones and 2 x Dell 2048 switches stacked to our servers. I have 4 x 10 gb twinax cables to connect the two heaps as in the pic below:

  

  What is the best way to implement these four connections? I tried to do a SHIFT of four ports in each stack, and it seemed to fall some ping until I disabled STP for the LAG group. I'm a little worried about turning off STP however. These are the only switches that are on the network. Any ideas on what the best config for this would be appreciated. Sorry, as I said I am quite new to this.

  Thanks, Dave

  Hi guys,.

  Just to wrap this I configured LACP on the mentioned LAG today and now, she purrs like a kitten.

  See you soon,.

  Dave

• Connect FI two directly attach FCoE storage and SAN switches

  Nobody tells me if I can connect FI two directly attach FCoE and SAN storage switches also, as you can see in the diagram of connected network?

  If so, should I FC Switch function Mode? Any concerns should I consider?

  Or the best solution would be appreciated. Thanks in advance.

  The UCS will be in Switch Mode FC, which means that it has a default area.  We cannot make a Zone merge with Brocade because we have no control to set up specific items such as domain and other articles CF IDS that need to be changed when you connect a Cisco FC switch to a Brocade.

  Usually in this situation with a 5 k or a MDS you might be placed in mode of interoperability, which changes the default settings and we will talk to them together - in this case, you can't change these settings, so the only supported configuration is CF Cisco at Cisco.

  See you soon,.

  Greg Scarlett.

• Bluetooth connection between two 7290

  Hello

  I want to create a connection between two BlackBerry 7290 with OS 4.1 I found something with BluetoothSerialPort, but if I pair the und devices 2 start the application I get no BluetoothSerialPortInfos with the static method of the BluetoothSerialPort class.

  I tried to create a BluetoothSerialPort without an Info but that does not work. I get an IOException to Scripture.

  public boolean keyChar (key char, int status, int time)

  {

  If (key is Characters.ENTER)

  {

  Try

  {

  _port = new BluetoothSerialPort ("Hi there", BluetoothSerialPort.BAUD_115200, BluetoothSerialPort.DATA_FORMAT_PARITY_NONE |) BluetoothSerialPort.DATA_FORMAT_STOP_BITS_1 | BluetoothSerialPort.DATA_FORMAT_DATA_BITS_8, BluetoothSerialPort.FLOW_CONTROL_NONE, 1024, 1024, this);

  H = 'hi. '

  _port. Write (h.GetBytes ());

  }

  catch (Exception e) {Dialog.alert (try ()) ;}}

  }

  }

  At this point, I get the Exception when writing. Can someone help me please? Martin

  When you pair the Bluetooth devices, they exchange a list of services they support.  This means that you will need to have a server side application up and running which listens to the incoming Bluetooth connections before they are matched.  Otherwise, the other Bluetooth device will not know about your application and will not be able to connect to it.

• What should I do to get my pc to play through the TV? Ive connected the two, but still not getting all of the music television.

  Ive connected the two, but don't know how to get the sound to play through the TV speakers.

  Standard graphics cables don't carry audio, you need HDMI cables to the video with audio. If your PC or TV has no audio HDMI capability must come from the audio output jack on the PC and go to the audio in connector on the TV, which is probably phono, so you'll need stereo Jack 3.5 mm to phono plug lead (or 3.5 mm jack on some audio input of your TV is compatible).

  Tricky

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Connect between two different applications. A call to the other application.

  I would like to know if it is possible to connect between two different applications in oracle apex IE appeal one request for the other? If the applications are allowed even say LDAP.

  Yes,

  Refer to the post office, requested by me and answered by fac586

  How to use one login for all applications in one only workspace

• back-to-back connection between two virtual machines on different ESXi servers

  Assume that a name of Virtual Machine VM1 is on ESXi Server 1 and Virtual Machine name is VM2 exist on ESXi Server 2.

  We can configure two Virtual Machines back to back as connect us two physical machine back to back via cross cable. is this possible?

  Sorry for typo's fault, should be separated vswitch, with dedicated physical network card adapter