CineForm quality levels - they mean something?

Similar Questions

• I want to keep my cookies, they are something, I'll share with only the one who gave it to me, no one else could even not that I have.

  Well thank you for clicking on my question curiously titled! Now, I want to block access to cookies. I do not want to block cookies, they are useful. Example; ABC let me a cookie, I'm on Zxy which can then read cookie Abc. That's what I want to stop. I don't want a site that does not allow the cookie to be able to see the cookie. I want to keep my cookies, they are something, I'll share with only the one who gave it to me, no one else could even not that I have. I tell myself that there must be a way to do this with Windows, I mean after all it allows read/write access.

  P. S.

  I like the fact that I can write on a cookies this way.

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you refer to the Chrome support the link mentioned below:

  Google Chrome help

  Sincerely,

  Ankit Rajput

• Point of desire: A list of HP printers with PCL level, they argue

  How can I get a list of HP printers with PCL level, they take over?

  The easiest way to get a list of printers and PCL, the method versions is to use something like Google or even Wikipedia.

  http://en.Wikipedia.org/wiki/Printer_Command_Language

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=bpl04568

• When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers. What they mean/stand for?

  When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers.  What they mean/stand for?

  Network 01 for a network printer port.

• I just installed lightroom cc on a brand new and reveived laptop 2 following errors.  can someone tell me what they mean and wll prevent of sing lightroom?  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code:-2147024546

  I just installed lightroom cc on a laptop computer brand new and reveived errors the following 2.  can someone tell me what they mean and they will prevent to use lightroom?

  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code:-2147024546

  AND

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\CHRIST~1\AppData\Local\Temp\{7A86BA4B-C59E-4130-9C4D-DA8765643E21}\Lightroom_6_ LS11\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center

• Random metadata for the LR4 warnings mean something serious?

  (LR4.1 on an iMac 2011 with 16 GB of RAM, running OS 10.7.4)

  I do my first big job in LR4 and worries me also the metadata warning indicators conflicted (two types: "metadata write error" and "metadata have been modified outside") are appear and reappear randomly on my thumbnails of images. There is absolutely no consistency in which images are affected. I guess that the problem may be due to initially because I had used to apply a couple of preset import - a copyright line, as well as the development of specific camera settings. These were created in Lightroom 2: most of the 14 000 images in my Lightroom Catalog date from before my upgrade to LR3 in October (I went to LR4 at the end of April and 4.1 a week before; I did not notice this problem in LR3, but I did a lot of work in this version of the program, so it may have been present and I just did not notice).

  As I said, not all images are affected; but those who are have nothing in common. (While most of my pictures have applied to import presets, or later - when I came with the new default settings of camera specific, I've also applied retrospectively to all images, I've not yet dealt individually.)

  My frustration is not just that this problem exists in the first place: if it is caused by the import settings, I deleted develop it a (and triple-checked that nothing other that default values of own Lightroom treatment applied) and that of copyright, throw away the original. However, when I try to erase the flags by clicking on it and OK 'ing the OK and dialog or command-S box' ing in this way, they grow upward immediately or shortly after; sometimes on the same than before images, sometimes on the other.

  I had "save automatically to XMP" checked as a preference (have been for years, so all my images, XMP files next to them). Although Lightroom imagine that images were also changed in another program, the vast majority are NEF raw files, and I do not use any other image display or modification of programs. (There are also a few Photoshop files that may or may not have flags).

  How I tried to solve:

  1 a lot of saved - either by selecting all images in a folder or collection and do a manual backup or by clicking on the flag and OK'ing the dialog box; or by selecting only the relevant images and do the same thing. or through one by one, ditto. But whatever I do, flags more grows on the same or other images in the folder (although sometimes after several stops, they seem to disappear for good).

  2 throw LR preferences. Since it made no difference, I recovered and reintegration.

  3. delete all user presets to develop, as well as the copyright for the import. (I Print and FTP presets, and I hope that I did not have as well. I don't use these modules for the moment, however.)

  4. has realized it was useless on the optimization of the catalogue, since this happens automatically, alongside check its integrity and backup, each time I have quite Lightroom - what I'm doing after each work session, to make sure that I'm fully backed up.

  5. at some point in all of this, I also restarted my Mac (after I had deleted the preferences, I think).

  6. I have excluded my Time Machine backups LR catalog, although there was a stop at this for a few days this week, after I upgraded to LR4.1 (and now I'm worrying that actually this could go back to my upgrade to LR4 in April). But probably the catalogue is not corrupt, or I would get a warning during regular inspections on its integrity?

  What really worries me is that this weird behavior means that there is instability in Lightroom that will tell the work I did on my images is compromised in some way, and I'm going to lose again them.

  How can I get rid of these warnings (incorrect) randomly permanently?

  (I publish on this last week, but did not know how pervasive and persistent, the problem was.) I rang Adobe for support on 7 June and was cut twice; they have not responded as they opened when I was cut for the second time. I tried phone them three times this morning and couldn't move - I've been cut once again, twice; the other time, I just got no air circulation. Their phone system seems to be completely to the top of the Creek. When I managed to speak to someone, kept going to the sound - what the techie seemed oblivious to, no matter that I kept telling him that I could not hear it.

  I'm really worried that the intensive work, I do in Lightroom at the time current will all go to waste, so I cling to the time where I really need to take advantage of these days I have free right now to do the job.)

  It took two weeks, but Adobe finally solved this problem for me. It has proved to be a problem with the permissions on the Mac - i.e. something obscure to do with the operating system (I'm 10.7.4 OS), not directly to do with Lightroom. The solution involves reinstall Lightroom 4 and restart with the SHIFT key (a "safe boot") and then selecting my pictures, by clicking on a flag and OK'ing the "Lightroom replace settings" option by default. I then repaired the permissions with disk utility, rebooted the Mac normally, downloaded LR4.1, repaired permissions again and checked again for the flags. I can't tell you the relief when they weren't there more!

  I checked log disk utility, and I had not fixed the permissions after installing Lightroom 4 April 25; I did only a month later. I had read somewhere that it is therefore essential to repair permissions after installation of the software (and Lion always wildly overestimates the time it will take, which is off-putting); but this experience has convinced me to return to my old practice on that. Although it may be that this particular permissions issue is not related to that (I do not understand the software at this level: I just do what I said!).

• Bad quality when they are imported from FCP

  Hello I got problems when you import a QT file into After Effects. When exported from FCP and imported into After Effects images lose significant quality, maybe a little intertwined. Ive checked and double checked fields, Im exporting in the animation. Ive done these two cameras QT and QT movie with the same result. It also happens with FCP export files from other computers. Ive checked the export settings & coposition parameters. Any ideas?

  Thank you

  -DWS - wrote:

  Thank you. This is what makes the most sense to me. How to elect how After Effects interprets the images? I went into the preferences, but could not find something that it has fixed the problem.

  See the help system for interpreting the film.

  It is a form of drop-down list to right click on the part of the project. Select a footage item, interpreting the film.

• When you perform a search for a suspected Trojan horse, 2 results show in blue and 2 black. Does this mean something?

  I did a search on my computer for a presumed Trojan called services.exe.  I found 4 results, 2 in blue print and 2 in black letters.  When I open containing folder is also all the blue print for the search results blue and black with black.  Is there a reason for this?  Why it is not blue?

  Blue color means that the files are compressed. No grand.

  MS - MVP - Elephant Boy computers - don't panic!

• There is a small mark on my screen, any program I. It resembles a small t. This means something for you? Am I monitored?

  I have this very strange.  the brand is still there, he can't know.  All answers there?  Thank you, John...

  A moderator has moved this thread to the Windows desktop and personalization Forum.

  You are welcome.  Glad to be of service.

• I wanted to switch to msn, and then select a screensaver nowpictures that one they are not going, looked in autour they say something about malware. can you help me

  Am I on msn cause other know I like her. It's been great, then last night I was looking for screen saver. A page of pictures came to the tup he said 2011-photojournal. I tried to exit, tried everything, but I just spent. He always leaves to go to other pages. Can someone tell how to fix? I don't know much about computers so just explain it to me. Thanks to everyone out there. My name is Kay

  Hi kayclodfelter,

  Take a look at the links.

  http://Windows.Microsoft.com/is-is/Windows7/change-screen-saver

  http://Windows.Microsoft.com/is-is/Windows-Vista/exit-a-program-that-is-not-responding

  http://Windows.Microsoft.com/en-us/Windows7/why-is-Windows-closing-my-program

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• How can I change the email address when a user receives email notification that they have something to sign

  Deleted image because he had emails in there

  image showed an address with name 1 < [email protected] >

  the answer any domain had name 2 < with the addresses of the senders >

  You can not change the address, it will always be [email protected]. We cannot impersonate the real sender.

  The persons name is different, but this is done at the end of the reception. Most likely, the beneficiary has a contact in their address book for [email protected] with 1 listed name.

  Support will be sent you the message for the e-mail header received by the recipient, indicating the name of the two name 2 people. (Ro)

• Indesign conversion errors pdf to pdf/a-1 a - any ideas what they mean?

  Acrobat's convert a PDF 1.5 tagged generated by indesign for PDF/A1a, but seems unable to do this.

  If someone could explain to me these errors:

  -Structured PDF: type entry in a structural element not "StructElem".

  -Structured PDF: type entry missing

  .. .it would be greatly appreciated so I can refine my search.

  A step by step on explanation how this conversion is possible would be even better (but any help will do)

  Acrobat X has improved PDF/A support, that is why I recommended.   And no, it comes after CS5.

• Another hierarchical query

  Hello
  
  Can frank, you help me again? Please? I'm still working on this hierarchical queries, and I think that you are the only person who can help you.
  
  I need to do a SELECT complex between two tables. Your help in this previous post (complex in SELECT transformations has been very useful.
  
  I learned a lot and almost all of the transformations that I put in place, but I have a really weird... I have to be able to limit the number of offspring for a given node.
  
  Take this DEPARTMENT table, it is a simple HIERARCHICAL table. IDS are convinient, but in reality id are completely random:

  SET DEFINE OFF;
  DROP TABLE DEPARTMENTS;
  CREATE TABLE DEPARTMENTS 
  (
    dpt_id NUMBER(10), 
    parent_id NUMBER(10),
    dpt_name VARCHAR2(100)
  );
  
  INSERT INTO DEPARTMENTS VALUES(1, null, 'Sales');
  INSERT INTO DEPARTMENTS VALUES(2, null, 'Insurance');
  INSERT INTO DEPARTMENTS VALUES(3, null, 'Accounting');
  INSERT INTO DEPARTMENTS VALUES(4, null, 'R & D');
  INSERT INTO DEPARTMENTS VALUES(5, null, 'IT');
  
  INSERT INTO DEPARTMENTS VALUES(10, 1, 'Local Sales');
  INSERT INTO DEPARTMENTS VALUES(11, 1, 'European Sales');
  INSERT INTO DEPARTMENTS VALUES(12, 1, 'Asian Sales');
  INSERT INTO DEPARTMENTS VALUES(13, 1, 'South American Sales');
  
  
  INSERT INTO DEPARTMENTS VALUES(110, 11, 'Germany');
  INSERT INTO DEPARTMENTS VALUES(111, 11, 'France');
  INSERT INTO DEPARTMENTS VALUES(112, 11, 'Belgium');
  INSERT INTO DEPARTMENTS VALUES(113, 11, 'Luxembourg');
  INSERT INTO DEPARTMENTS VALUES(114, 11, 'Spain');
  
  
  INSERT INTO DEPARTMENTS VALUES(1101, 110, 'Berlin');
  INSERT INTO DEPARTMENTS VALUES(1111, 111, 'Paris');
  INSERT INTO DEPARTMENTS VALUES(1121, 112, 'Brussels');
  INSERT INTO DEPARTMENTS VALUES(1141, 114, 'Madrid');
  INSERT INTO DEPARTMENTS VALUES(1142, 114, 'Barcelona');
  INSERT INTO DEPARTMENTS VALUES(1143, 114, 'Malaga');
  
  INSERT INTO DEPARTMENTS VALUES(121, 12, 'China');
  
  
  INSERT INTO DEPARTMENTS VALUES(20, 2, 'Car Insurance');
  INSERT INTO DEPARTMENTS VALUES(21, 2, 'Home Insurance');
  INSERT INTO DEPARTMENTS VALUES(22, 2, 'Family Insurance');
  
  
  INSERT INTO DEPARTMENTS VALUES(200, 20, 'Bus');
  INSERT INTO DEPARTMENTS VALUES(201, 20, 'Family car');
  INSERT INTO DEPARTMENTS VALUES(2011, 201, 'Sub category for family car');
  INSERT INTO DEPARTMENTS VALUES(202, 20, 'Sport car');

  And I also have another table with gives for a given node, the number of offspring allowed for a given node.
  

  CREATE TABLE LIMITATIONS 
  ( 
    dpt_id NUMBER(10), 
    lvl_cnt NUMBER(10) -- max descendants
  );
  
  INSERT INTO LIMITATIONS VALUES(1, 4);
  INSERT INTO LIMITATIONS VALUES(11, 1);
  
  INSERT INTO LIMITATIONS VALUES(2, 2);
  INSERT INTO LIMITATIONS VALUES(20, 2);

  For example, the first record inserted into the table of limited means for the Department with id 4 take us 4 offspring. The strange thing is that the 11 node is a descendant of the node 11. And you override the value of its parent. At this level, substitute us the value and we accept only one descendant level.
  
  The first example to delete the record from Berlin in the result.
  
  The second pair of insertion is to have the second scenario I have to manage. Instead of substitute for a limitation of parent by reducing it, I must also support increasing values. A descendant node can
  have more value than a parent one.
  
  This second example keeps the Department with dpt_id = 2011. Even if I get only 2 descendant of the Department with id = 2.
  

  "LEVEL"                       "DPT_ID"                      "PARENT_ID"                   "LPAD('',LEVEL)||DPT_NAME"    
  "1"                           "1"                           ""                            " Sales"                      
  "2"                           "10"                          "1"                           "  Local Sales"               
  "2"                           "11"                          "1"                           "  European Sales"            
  "3"                           "110"                         "11"                          "   Germany"                  
  "3"                           "111"                         "11"                          "   France"                   
  "4"                           "1111"                        "111"                         "    Paris"                   
  "3"                           "112"                         "11"                          "   Belgium"                  
  "4"                           "1121"                        "112"                         "    Brussels"                
  "3"                           "113"                         "11"                          "   Luxembourg"               
  "3"                           "114"                         "11"                          "   Spain"                    
  "4"                           "1141"                        "114"                         "    Madrid"                  
  "4"                           "1142"                        "114"                         "    Barcelona"               
  "4"                           "1143"                        "114"                         "    Malaga"                  
  "2"                           "12"                          "1"                           "  Asian Sales"               
  "3"                           "121"                         "12"                          "   China"                    
  "2"                           "13"                          "1"                           "  South American Sales"      
  "1"                           "2"                           ""                            " Insurance"                  
  "2"                           "20"                          "2"                           "  Car Insurance"             
  "3"                           "200"                         "20"                          "   Bus"                      
  "3"                           "201"                         "20"                          "   Family car"               
  "4"                           "2011"                        "201"                         "    Sub category for family car"
  "3"                           "202"                         "20"                          "   Sport car"                
  "2"                           "21"                          "2"                           "  Home Insurance"            
  "2"                           "22"                          "2"                           "  Family Insurance"          
  "1"                           "3"                           ""                            " Accounting"                 
  "1"                           "4"                           ""                            " R & D"                      
  "1"                           "5"                           ""                            " IT"                         

  Any suggestions on how I can proceed? I'm still using Oracle 10 g Release 2
  
  Thanks in advance,

  Hello

  user13117585 wrote:
  Imagine this data set:

  TRUNCATE table departments;
  
  INSERT INTO departments values(1, null, 'name 1');
  INSERT INTO departments values(10, 1, 'name 10');
  INSERT INTO departments values(100, 10, 'name 100');
  INSERT INTO departments values(1000, 100, 'name 1000');
  INSERT INTO departments values(10000, 1000, 'name 10000');
  INSERT INTO departments values(100000, 10000, 'name 100000');
  INSERT INTO departments values(1000000, 100000, 'name 1000000');
  INSERT INTO departments values(10000000, 1000000, 'name 10000000');
  

  When you CONNECT BY

  SELECT LEVEL, dpt_id, parent_id, LPAD(' ', LEVEL) || dpt_name
  FROM departments
  START WITH parent_id IS NULL
  CONNECT BY PRIOR dpt_id = parent_id;
  

  You have 6 different level.

  I have 8 different levels, not 6. You use 'level' to mean something other than the 1st column in the query above? Explain.

  Imagine that I put on the limits of table to the following folder:

  truncate table limitations;
  
  INSERT INTO LIMITATIONS VALUES(1, 4);
  

  Then, select it I write should return only the first four results of my previous recordings (up to dpt_id = 1000).

  But in the table, I should be able to establish a limit on any node in the tree. For example, insert a record for id = 100, then set it to a limitation of 2. And then, the limitation of the mother is overridden. This means that for 100 service, 2 other descending levels is recovered. (We assume that we cannot have broken trees. You can't say, add a limitation on the node with dpt_id = 1 to 1, then add a limitation on the 10000 to 1 node. Thats is not allowed).

  SO if I add

  INSERT INTO LIMITATIONS VALUES(100, 2);
  

  Level 5 first on my select must be indicated. Because I asked to recover more than two levels of node 100 which is already at level 3.

  Why 5 levels and not 4? When limit you the output to four levels of 1, you were level 1 in other words, the four levels are 1, 2, 3 and 4. When you are limiting the output at two levels of level 3, why are they not at these two levels 3 and 4?

  But the limits can be to increase the depth of the tree to recover from a particular node or cut the knots.

  INSERT INTO LIMITATIONS VALUES(1, 10); -- get 10 descendent levels even if it only contains 6 levels.
  

  What do you want on the last 4 lines of output in this case?

  INSERT INTO LIMITATIONS VALUES(10, 2); -- override previous limitation and returns only 2 descendents from level 10. 
  

  Do you really mean level 10, or do you mean dpt_id 10?

  If I have ass these limitations (and delete the previous ones), I would like to show only the first 3 levels. Because dpt_id 10 is alread at level one.

  Is not dpt_it = 10 to level * 2 *? Dpt_id = 1 is at level 1.

  The limitation is not an account on descendants, there is a limitation in the level.

  Doesn't that contradict what you said above in this post:

  the column name is not very clear. And as you say, it should be more descendant_cnt

  ?

  If a node has 100 direct descendants (children) at level + 1, and the limitation is level + 2, it must return all nodes. The limitation is the depth of a given node.

  I don't know if this is clearer?

  No, sorry. Please answer the questions above.

  Here is the answer to a problem of intresting. This isn't the problem that you have requested in this message, or the problem you asked in your first post, but it may be the problem that you wanted to post:

  WITH    got_limitations        AS
  (
       SELECT     d.dpt_id
       ,     d.parent_id
       ,     d.dpt_name
       ,     l.lvl_cnt
       FROM           departments  d
       LEFT OUTER JOIN      limitations  l  ON  d.dpt_id     = l.dpt_id
  )
  ,     tree     AS
  (
       SELECT     LEVEL                    AS lvl
       ,     dpt_id
       ,     parent_id
       ,     LPAD ( ' '
                   , LEVEL - 1
                      ) || dpt_name          AS d_name
       ,     LEVEL || SYS_CONNECT_BY_PATH ( LEVEL + lvl_cnt - 1
                                    , ','
                                    )     AS max_lvl_path
       ,     ROWNUM                             AS r_num
       FROM     got_limitations
       START WITH     parent_id     IS NULL
       CONNECT BY     parent_id     = PRIOR dpt_id
  )
  SELECT       lvl
  ,       dpt_id
  ,       parent_id
  ,       d_name
  FROM       tree
  WHERE       lvl   <= TO_NUMBER ( REGEXP_SUBSTR ( RTRIM ( max_lvl_path
                                            , ','
                                     )
                                , '[0-9]+$'     -- Group of digits at the end
                                )
                      )
  ORDER BY  r_num
  ;
  

  Given the sample of departments and these data within the limits:

  INSERT INTO LIMITATIONS VALUES(1, 4);
  

  It returns the 4 rows.
  With the same data in departments and in the limits:

  INSERT INTO LIMITATIONS VALUES(1, 4);
  INSERT INTO LIMITATIONS VALUES(100, 2);
  

  It produces 4 rows (not the 5 you asked).
  If has limits of

  INSERT INTO LIMITATIONS VALUES(1, 10); 
  

  It returns 8 rows (not the 10 you asked).

• Why the songs in iTunes have now star black and BLUE stars?

  replace the gray stars blue stars? or the Black Stars replace the gray stars? or they mean something else?

  I think its all academics like apple are clearly getting rid of the stars still coast.

  If anyone from apple is listening, enlarge the font doesn't make it easier.

  Why not let stars like black or a point. No Star gray. no blue star. no automatic scoring for albums. and the rating stars BRING BACK on iOS immediately!

  It would be simple and easy, and a lot of people really want to.

  It is a voluntary forum, but you can let apple know about your concerns and your suggestions here.

  Apple.com/Feedback

• Meeting place 8.0 - disable and reactivate the Participant in particular

  Hello

  I'm meeting place 8.0 Application Server (Express Media Server) installation and Web Server 8.0

  Problem is when presiding officer (host), who is planning a meeting, can't cut / activate the other participants (particularly) in the same session (Act as a moderator).

  Now, if we provide privilege assigned to the host, we get these rights to Mute and activate the microphone of this meeting and any other meetings running (which is a problem).

  Can we have a meeting of the President with Mute / Unmute access (particularly) for the meeting, which was hosted by him.

  Please provide some valuable contributions on the same.

  Thank you best regards &,.

  Ashish Bagla

  Hi Ashish,

  If you have the single MeetingPlace Audio, of the telephone user interface solution there is no possible way to mute individual participants. You, as the host, can cut only all participants, and then each participant can be reactivated if they mean something.

  The only other alternative is to use the Conference Manager. However, to be able to use this tool, the user/host must be either standard or system administrator user type.

  More on the conference manager you can find here:

  1. how to install the Manager of the Conference:

  http://docwiki.Cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Installing_MeetingPlace_Conference_Manager

  2. how to use the Conference Manager:

  http://docwiki.Cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Using_MeetingPlace_Conference_Manager

  I hope this will help.

  -Dejan