WGA54G connection to my router using WPA

Similar Questions

• Equium L300 unable to connect to my router using wireless

  I have a laptop Equium L300 and can't connect to my router using the wireless option.

  I am told that the wireless feature is disabled on my pc but the switch on the front is activated.

  Can connect with the cable is the wireless.

  Anyone know what this could be?

  Try pressing Fn + F8, only the activated Wifi become?

  In Device Manager, the wireless device is reported to work ok?

  Try a BIOS update as well.

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.

• Cannot connect by Satellite P100 using WPA WLAN encryption

  I got a Satellite P100-160 with Vista home premium and tried to connect to my wireless network having WPA security without success. Is it possible to make this work? My router is a SMC and their assistance service said I should look for an updated driver.

  Is there a driver? The card is an Intel Pro/wireless 3945abg.

  Hello

  I don't really know what the problem may be, but if possible, try to install the latest Intel driver. You can find it HERE

• 502 gateway incorrectly when you connect locally in router EA3500

  When I try to connect to my router using 192.168.1.1, or that the site is online, I get a 502 Bad Gateway and can't do anything. Internet works fine, but I can't configure the router.

  Things I've tried:

  Unplug the router for a bit, then reconnect.

  Factory reset the router with the button on the bottom.

  Using the android application to connect to the router. (Does not work, the router said wasn't online when it was clearly)

  Flushing DNS on the side of the computer, try different computers, trying different browsers, compensation hide browser.

  I tried to talk with Cisco via their online chat and found out that they are basically of crooks who want to charge you to fix things on the internet, but they told me that they believe it is a firmware issue and that I should update. I downloaded the latest firmware, but how do I update the firmware when I can not connect to the router?

  Hold down the button to reset for 10 seconds. The power led on the router will keep flashing for a few seconds after you have reset as it is still trying to stabilize. Once the power led comes on solid means that the reset is successful. Power cycle the router and make sure that the computer is connected to the router by an Ethernet cable. Remove the cache and the history of navigation on your computer, and then try again. It would be better if you can also try to access the page using another computer. I hope this helps!

• Authentication MAC with Wirelss using WPA

  I have some wireless work stations that are setup place as booth were I work. I want these laptops to make a connection with my 4.2 ACS SE to establish the secure connection to the background (using WPA). Then user with network valid logon credentials using windows credential. I couldn't get this to work. can someone help me?

  Thank you

  Mike

  Please check the docs of peap that explains about the PEAP authentication setting.

  Kind regards

  ~ JG

  Note the useful messages

• Portege 2010 PP201E - unable to connect to the router encrypted with WPA

  Hello

  I just bought a Toshiba (? 2002) Portégé 2010: PIII 866 MHz/XP... Part number: PP201E-00GPP-EN. support for the Wi - fi network: 802. 11 b

  When I try to connect to the internet using my sky router (WPA / PSK) my Toshiba does not connect because it asks for the WEP.
  I tried to change it on Assistant, but that's it or turn it off.

  I have only one option is to change the router WEP, but I heard it is an old and easily hackable, technology
  In any case, I don't want to mess with my router, another PC wireless and my playstation.
  I looked on update of the driver toshiba but that did not work.

  Does anyone know if there is a updated for my lapptop driver or do I have to buy a USB product?

  Thanking you

  Hello

  Maybe the internal WLan card does not support the newer WPA encryption but only the WEP key.

  The fact is that encryption is hardware related. This means that an update of the driver will not help you. If the hardware does not support WPA, then you need to replace the WLan card or buy a USB WiFi dongle that supports WPA.

  I have thin external USB WLAN key is the easiest solution

• Satellite Pro L300: Could not establish connection using WPA / WPA2-PSK

  Hello

  I have a Netgear FVG318 router with the new firmware and problems to connect using WPA-/ WPA2-PSK with Realtek RTL8187B integrated.

  With the help of WEP that works. I did a complete restore of Vista and installed SP1 + all Windows updates. No change...

  Then I tried using a Netgear USB WLAN Stick WPN111--> the same result, works only WEP.
  I rechecked the shared key before!
  After that I tried with a HP laptop, wonder... everything works! WEP, WPA / WPA2-PSK works! What do you mean?
  I think that there is a software problem in Toshiba-Vista version.

  Do you have any idea? The support has not helped me.

  Hello

  What you need to do is first of all update the WLan driver and if possible, you should check if the latest BIOS is installed too.
  I had similar problem on my A210 and all first I've updated the BIOS, then driver WLan.

  This helped to establish the WiFi connection.

  Check it out!

• How can I change to use a wep, tells me is not secure personal wpa running? I have a brand new d link 2680 router & used windows xp 3?

  How can I change to use a wep, tells me is not secure personal wpa running? I have a brand new d link 2680 router & used windows xp 3?

  Wireless security is controlled by the router.

  Download the manual of your router on the following link:
      <>FTP://FTP.Dlink.co.UK/diagrams/Misc/DSL-2680_A1_Manual_EU_1.0.PDF >

  To change to the WPA instructions are on page 39.

  After that, you may need to remove all references to your router on your devices without wire, then re-establisg the connection.   Alternatively, you can change your Secure ID (SSID) as you make changes to the configuration of your router and then reconnect the new SSID for all devices.

  HTH,
  JW

• Problems authenticating using WPA/TKIP with AT & T 2wire router

  I have problems trying to authenticate on AT & T 2WIRE router. Before, I was using a Linksys router on Comcast and had no problems, but after switching to AT & T and their equipment, my computer vista no will authenticate not. I don't get an other error message that Windows could not connect to the network. I have a Windows 7 box, Epson wireless printer and XBox which can connect without a problem. It's just that Vista machine which does not connect.

  I tried to update the wireless network card drivers, I restored the computer to factory settings, I tried everything. I had success when I step down to WEP security, but it's not the level of security that I want to keep. The real odd part is that it has worked well with Comcast and Linksys but not with the 2WIRE router.

  Any help would be appreciated.

  Joe

  Hey Joe,

  We do not recommend the use of WEP. WPA or WPA2 are more secure. If you try WPA or WPA2 and they do not work, we recommend that you upgrade your network card to those who work with WPA or WPA2.

  For more information, you can consult the following link:

  What are the different wireless network security methods?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-different-wireless-network-security-methods

  You can consult the following links to set up a wireless network using WPA or WPA2.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-security-key-for-a-wireless-network

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot connect to a WPA - PSK with WLAN DW1520 Wireless-N particular, but can when no security is set to wireless. How can I get the card to use WPA - PSK?

  I have a DW1520 Wireless-N WLAN Half-Mini card in an Alienware M17X10. I am trying to connect my home through a TRENDNet TEW-435BRM access DSL issue in WPA - PSK.

  I was able to get the card to use the accounts wireless WPA2-PSK and WPA - PSK in other areas is not a problem directly related to WPA - PSK.

  I can get it to connect to the network when the diffuse TRENDnet without security (free release) and when directly plugged into the wireless router, cable - but every time I go to dissemination of WPA - PSK it can't connect?

  While in WPA - PSK the WLAN card can 'see' the network and wireless router can see the 'computer' (and is a 'trust machine'). I have one couple of other previous model Dells connected to the network without problem or needed changes if any ideas why I would have questions here?

  The driver installed is the 'last' to 5.60.48.35.

  I tried to restart the router and the computer without success. I use Windows Firewall.

  No bright sparks that can point me in the right direction?

  Thank you

  Declan

  Hello

  Try resetting the password in the part of the router wireless, then copy and paste it to the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Satellite P100-160 refuses to connect to my router 3Com with WPA - PSK

  Help! My new laptop Toshiba refuses to connect to my router 3Com (f/w 2.06T13) model 3cWDR100A on WPA - PSK. The router only supports TKIP (no AES).

  The laptop, a Satellite P100-160 is under Vista Home Premium with the latest Intel 3945 11.5.0.32 driver and I tried the version of the site Web of Toshiba version mentioned in other threads (and a few other versions also).

  Either way, I don't like latest driver hit with content identical binary files and different date stamps or running of the anonymous installers that have not been digitally signed.

  The problem is that non-encrypted, or WEP works perfectly, but WPA - PSK is not. It fails with a diagnostic message 'timeout for secondary keys. The thing will be very occasionally connect to the network without a timeout (before I tried to improve things with the last pilot about 1 in 20 attempts after a reboot, now it comes rather from 1 to 100). If I can be sure that the password is correct. When it connects everything is fine and stable with excellent signal until the first suspended and then the connection is lost. It's more than a little irritating.

  I see several topics of doom similar networks to Vista support groups. They all seem to hinge around WPA - PSK TKIP and WiFi Intel chipset x 945 in combination with certain models of router. Please can anyone help solve this mess?

  I've seen other threads of networking in Vista by users with this specific Intel chipset and my router model having exactly the same problem and so far nobody has found a solution. I checked the basics of knowledge (MS & 3Com) and tried a few plausible fixes, but nothing helped. I'm out of ideas.

  It seems a little absurd to demote network security to make the latest PC works correctly. Dumping Vista (however tempting) is not an option.

  Thanks for any suggestions or diagnostics.

  Kind regards
  Martin Brown

  Hello Martin

  As you can see this is not Toshiba specific stuff and if there is no 'global solution' I don't really know what Toshiba should do about it. As you all know it should support hardware and software (driver), but if not I don't really see a solution for this.
  Who should offer a solution? Toshiba or Intel?  :|

• Connection to the internet using a Verizon Wireless router

  I have a Compaq Presario CQ60-210US running Vista 32-bit Service pk2 with an Atheros AR5007 802 Wireless card. 11b / g. I have problems to connect to the internet through a router with WPA-2 Verizon Wireless. I can connect to the wireless router, but it will not connect to the internet through it. I am able to connect wirelessly through other routers wireless without any problem. All solutions?

  Problem was with the wireless card Atheros who need an updated driver. Found a newer driver on a Czechoslovak website. Downloaded and intalled and solved the problem.

• connect to hp 7525 to the router using kat5

  you want to connect photoject hp 7525 router without using wireless.  a pc at the opposite end of the House cannot be connected wireless, but there kat5 connection to the router.  other pc is also connected to the router with kat5.  need printer connected so two pc s everyone can print.

  You have a wireless router with some ports wired for computers?  Photosmart 7525 has a capacity of cable network.  Generally connect you computers wired to the router with CAT-5 connection and then connect the printer to the wireless router.  You would then install the drivers on each computer, specifying 'Wireless' for the connection.  The document here can help to set up the printer.

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.