Cisco ASA of firepower

Hello!

I have a 5506 performs all the functions allowed and ASDM to configure the module. The module is great, but I wonder if it s possible to 'move' administration to virtual Management Center rather than use ASDM. I played a bit with the version of ESXi Management Center. I tried to find information regarding make after you you already ASDM running with planning services.

See you soon

Martin

Hi Martin,

You can manage ASA 5506 fire using DC power. You must add the handler to FP cli. Everything is covered in the following configuration guides.

http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...

http://www.Cisco.com/c/en/us/TD/docs/security/firesight/541/virtual-Inst...

Thank you

Dinkar

Tags: Cisco Security

Similar Questions

Cisco ASA 5508 with firepower of speeds VPN

Nice day

Can someone tell me which is better performance Anyconnect VPN or Cisco VPN?, I intend to use a VPN for my users to connect and transfer files to a shared folder speed does.

Also, I don't want my clients to access a Web page or portal to get the client I can install the VPN client on the client labtop.

Is it possible to do this as well?

Hello

The shared screenshot has the correct option is selected.

Yes anyconnect supports IPSEC thus:

https://supportforums.Cisco.com/discussion/11501221/Cisco-AnyConnect-DOE...

http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

Please visit this link for the plug ASA 5508-firepower:

http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-serie...

Kind regards

Aditya

Please evaluate the useful messages and mark the correct answers.

Add the date of activation of the system of detention of intrusions and Cisco ASA FirePOWER

Good evening

I want to add detention system intrusions to Cisco ASA FirePOWER license (with I.P.S, protection MPAs., Apps and URL). Is possible that? I have to buy another license or only (not free) upgrade?

the start date of the firepower Cisco ASA license-protection starts from the purchase date or from date of activation/installation on router ASA5506-X?

Hi again, my responses below:

(3) the L-ASA5506W-TAMÁS = is the correct part number if you are looking to get the model of 5506-X Wireless ASA. Don't know why ours (CDW) site has not listed :) However, we have listed promotional SKU: L-ASA5506WTAMC-1PR. For more information, I suggest that join you your CDW account manager. If you are not a customer CDW then I would suggest that you contact your local Cisco partner dealer

(4) here's the datasheet FireSIGHT:

http://www.Cisco.com/c/en/us/products/collateral/security/firesight-Management-Center/datasheet-C78-736775.html

The device can be virtual or physical

5.1) IOS-base-2960 - I'm not sure I understand the question. Can you elaborate a bit more on what you're asking here?

5.2) I.D.S. requires no additional licenses. It is part of the solution if you buy above subscriptions. The main difference here is that IPS (Intrusion Prevention System) is deployed in line and he will drop the traffic/connections if a malicious activity is detected. IDS (Intrusion Detection System) is monitor only. Thus, if the malicious traffic is detected, firepower will alert you to this topic but he will drop all traffic.

3DES/5,3) AES will be included at the time of the references you listed.

Thank you for evaluating useful messages!

Cisco asa geo blocking.

Is there a way by which we can block all connections from a country on Cisco ASA, without us manually define an ACL.

Hardware Cisco ASA5510-

-Version 9.0

N °

This kind of functionality is available in newer models (ASA 5500 - X series) when you add modules of services of firepower with their associated licenses.

They can download and automatically update a database of geolocation you can use in your access policy.

Filtering in Cisco ASA using module sfr Web

Hello

I have Cisco ASA 5515-x version 9.2 (2) and I use ASDM version 7.2 (2). I module 5.3.1 LICO of ASA. I want to activate the ASA web filtering feature. Previously, I used the method of expression regex in the SAA to perform url filtering, but it was not effective. Since then, I have the license for the management of firesight I want to use it.

But I am confused as some cisco docs say to set the firesight management in vmware while others offer to run the boot image in the SAA itself. What is the right way to do it?

The show module command, I see that my module of sfr is in place so that means the sfr module is pre-installed, and I can't do a lot of configurations?

It would be better for me to run ASA itself, but if it does not work like that then I will configure in VM. So please me clearify that concerns my options and my best chance.

If it should be installed on a virtual machine or ASA itself, then please give me the link to download the boot images and other files on cisco.com. I have the user name and password, but did not find the correct software.

Thank you in advance.

Your ASA 5515-x performs the minimum version required to support the fire power module (sfr). The module also runs the initial version of the software of the firepower for ASA-based module firepower.

With this combination of Software ASA and firepower on your device, you will need to use an external administrator of firepower to manage module (create strategies, apply licenses, monitor events etc.).

From ASA 9.5 (1) and firepower 6.0, you have the opportunity to make the most of the same functions via ASDM. You must upgrade the ASA (both ASDM) and firepower to achieve module.

In both cases, you should Protect licenses and URL filtering for the module of firepower.

The Quick Start Guide is here: http://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/sfr/firepo...

See also the excellent vidoe Lab Minutes guides for firepower: http://labminutes.com/video/sec/ASA%20FirePower

The ASA and ASDM software is here:

https://software.Cisco.com/download/type.html?mdfid=284143128&flowid=31442

Software module of firepower is here:

https://software.Cisco.com/download/release.html?mdfid=286271171&flowid=...

To run the power of fire management center VM, the software is here:

https://software.Cisco.com/download/release.html?mdfid=286259687&flowid=...

All the links above require a username cisco.com entitled (support agreement) to download the software.

ASA 5545 firepower question X

Hi all

I have an urgent matter, I bougth 2 ASAs 5545 x with firepower, both ASAs Sourcefire inside of the Flash, but only has the State upwards.

When I run the show module command,

ASA1

==========================================================================================

ciscoasa # sh module

Model serial number of map mod
---- -------------------------------------------- ------------------ -----------
0 ASA 5545 - X with SW, GE 8 data, 1 GE Mgmt ASA5545 FCH19207Y7G
IPS unknown n/a FCH19207Y7G
cxsc unknown n/a FCH19207Y7G
SFR unknown n/a FCH19207Y7G

MAC mod Fw Sw Version Version Version Hw address range
---- --------------------------------- ------------ ------------ ---------------
d8b1.9040.ba11 0 to d8b1.9040.ba1a 1.0 9,0000 8 2,0000 4
IPS d8b1.9040.ba0f to d8b1.9040.ba0f / o
cxsc d8b1.9040.ba0f to d8b1.9040.ba0f / o
SFR d8b1.9040.ba0f to d8b1.9040.ba0f / o

The Application name of the SSM status Version of the Application of SSM mod
---- ------------------------------ ---------------- --------------------------
IPS unknown current Image number does not apply
cxsc unknown No. current Image does not apply

Data on the State of mod aircraft compatibility status
---- ------------------ --------------------- -------------
0 to Sys does not apply
IPS does not is not Applicable
cxsc does not not Applicable
SFR does not not Applicable

Mod name license status time remaining license
---- -------------- --------------- ---------------
IPS IPS Module perpetual mobility

=================================================================================

ASA2

==========================================================================================

ciscoasa # sh module

Model serial number of map mod
---- -------------------------------------------- ------------------ -----------
0 ASA 5545 - X with SW, GE 8 data, 1 GE Mgmt ASA5545 FCH19207Y7G
IPS unknown n/a FCH19207Y7G
cxsc unknown n/a FCH19207Y7G
SFR FirePOWER Services Software Module ASA5545 FCH19207Y7G

MAC mod Fw Sw Version Version Version Hw address range
---- --------------------------------- ------------ ------------ ---------------
d8b1.9040.ba11 0 to d8b1.9040.ba1a 1.0 9,0000 8 2,0000 4
IPS d8b1.9040.ba0f to d8b1.9040.ba0f / o
cxsc d8b1.9040.ba0f to d8b1.9040.ba0f / o
SFR d8b1.9040.ba0f at d8b1.9040.ba0f s/o s/o 5.3.1 - 152

The Application name of the SSM status Version of the Application of SSM mod
---- ------------------------------ ---------------- --------------------------
IPS unknown current Image number does not apply
cxsc unknown No. current Image does not apply
SFR ASA FirePOWER Up 5.3.1 - 152

Data on the State of mod aircraft compatibility status
---- ------------------ --------------------- -------------
0 to Sys does not apply
IPS does not is not Applicable
cxsc does not not Applicable
SFR Up Up

Mod name license status time remaining license
---- -------------- --------------- ---------------
IPS IPS Module perpetual mobility

=================================================================================

I tried these commands to retrieve the firewall

SW-module module sfr recover configure image disk0:asasfr - 5500 x-boot - 5.3.1 - 152.img
SW-module module sfr recover boot

The threshold of State the same thing, but I can connect to the module of firepower through console session sfr.

Please can you help me?

If you started the recovery image, you have a partial installation. You need to go in the module with the command of session and launch the installation. Once you have a Setup "bootstrap" in place, you can complete the recovery process by installing the full image.

Something like this:
```
 ciscoasa# session sfr console Opening console session with module sfr. Connected to module sfr. Escape sequence is 'CTRL-^X'. Cisco ASA SFR Boot Image 5.3.1 asasfr login: admin Password: Admin123
```
Then run the installation program, followed by 'system install' to load the full image (pkg) package as follows:
```
 asasfr-boot> system install ftp://@/asasfr-sys-5.3.1-152.pkg Verifying Downloading Extracting Package Detail Description: Cisco ASA-SFR 5.3.1-152 System Install Requires reboot: Yes Do you want to continue with upgrade? [y]: Y Warning: Please do not interrupt the process or turn off the system. Doing so might leave system in unusable state. Upgrading Starting upgrade process... Populating new system image Reboot is required
```
Once you reboot, the module of sfr should show that up to. You can then connect back (using admin / Sourcefire), accept the EULA, and end with the re-definition of addressing, and then adding the definition of a Manager.

The traffic load between the power of Cisco ASA and FireSight Management Center fire

Hi all

I have a stupid question to ask.

Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

Maybe you all have no idea to provide.

It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

Generally it is not a heavy load, however.

How to configure ASDM Cisco ASA 5505

I have a Cisco ASA 5505 firewall, and currently it is a command-line firewall. I want to configure ASDM so that I can use it as a Web based GUI interface.

I don't really know what to do. Can someone help me please how I can configure ASDM on my firewall.

Kind regards

Naushad Khan

Hi Naushad,

First of all, must load the image ASSDM on SAA and then use the command:

ASDM image dosk0: / asdm645.bin (if the image name is asdm645.bin)

then:

Enable http server

http 10.0.0.0 255.0.0.0 inside (if your machine is 10.0.0.0 subnet behind inside the inetrafce)

Go to the machine, open a browser and type:

https://

It will open the GUI.

Thank you

Varun

Please evaluate the useful messages.

Cisco ASA 5500 Series 4-Port GE SSM

Currently, we have 2 asa 5510 firewall and need to add the

Cisco ASA 5500 Series 4 - Port GE SSM extension module. Can it be added when the device is turned on and running or the firewall must be turned off to install the plug-in?

Hello

You could try to ask this question of the team of firewall, as this page from the community for the physical security and video surveillance. The team of firewall is located here:

https://supportforums.Cisco.com/community/NetPro/security/firewall

CSCux29978 - Cisco ASA IKEv1 and IKEv2 buffer overrun vulnerability - 1

Hello

im confused. In the Advisory secruity on this bug https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/ci...

He said not "affected" in the line of the main version of ASA 9.1. 9.1 is so affected by this bug and we need to upgrade to 9.1. (7) or not?

regarding

Christian

Hi Christian,

According to the chart, the only version not affected is code 8.5 9.1 code, you must update to 9.1.7 to be safe from this vulnerability.

Cisco ASA Major Release	First version fixed
7.2¹	Affected; migrate to 9.1 (7) or later version
8.2¹	Affected; migrate to 9.1 (7) or later version
8.3¹	Affected; migrate to 9.1 (7) or later version
8.4	8.4 (7.30)
8.5¹	Not affected
8.6¹	Affected; migrate to 9.1 (7) or later version
8.7	8.7 (1.18)
9.0	9.0 (4.38)
9.1	9.1 (7)
9.2	9.2 (4.5)
9.3	9.3 (3.7)
9.4	9.4 (2.4)
9.5	9.5 (2.2)

It may be useful

-Randy-

Cisco asa active multiple interfaces on a single switch without configuration of vlan switch.

I was wondering if there is a work around on cisco asa to have 2 interfaces vlan on a switch. The reason I ask I have a cisco asa 5505 and a dell switch that does not support the configuration of VLANs. I set up 2 interface vlan on a cisco asa and when two interfaces are active my internet drops frequently. I was wondering if there is nothing to configure the asa cisco to make this thing work. Thanks in advance...

Assuming that Dell switch at least linking several interfaces of the ASA to the Dell should translate all media spanning tree protocols, but a bet covering the tree blocking State to avoid a tree covering loop.

If the Dell does not support tree covering weight then you would be in very bad shape each broadcast packet would be will loop indefinitely and cause what we call a 'broadcast storm. "

One way is not good and the other real harm.

Cisco ASA Cisco 831 routing static. help with ACL, maybe?

Hi all

What should be a simple task turns out to be difficult and I really need help.

The Cisco ASA obviously isn't a strong point on mine and could do with a point in the right direction. I hope that this will allow me to learn more about the ASA 5505.

OK so I have an ASA 5505. VLAN 1 is 192.168.254.1 and VLAN 2 DHCP of my cable modem.

I have a cisco 831 Ethernet router that will sit between my main LAN and my LAN test I want to implement for multicasting. the Cisco 831 has 1 Ethernet as 192.168.254.254 and Ethernet 0 is 10.1.1.1.

The ASA I have an interior route 10.0.0.0 255.0.0.0 192.168.254.254.

On the Cisco 831, there is a route 0.0.0.0 0.0.0.0 192.168.254.1. I can pass traffic via Cisco 831 to the ASA 5505 and internet, for example I can ping 8.8.8.8 and access everything on my main local network, but the other wan of any host inside the ASA 5505 is unable to ping anything on 10.1.1.x.

Where I'm going wrong? I did all my access to my a whole ASA, but it is still unable to do anything.

I will attached my configs with deleted passwords here and would like a good kick in the right direction. Without a doubt, it's something simple I'm missing and I'm sure it's with the ACL on the ASA 5505 like the packet tracer said that the package is abandoned due to the ACL

Thank you. :)

Thus, all traffic between these two LANs will travel on ASA, on the same interface.
Then please add this command in the global configuration of the ASA:
permit same-security-traffic intra-interface

Cisco ASA 5505 VPN Site to Site

Hi all

First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

I'd appreciate any help that can be directed to this problem please. Slowly losing my mind

Please see details below:

Two ADMS are 7.1

IOS

ASA 1

Nadia

:

ASA Version 9.0 (1)

!

hostname PAYBACK

activate the encrypted password of HSMurh79NVmatjY0

volatile xlate deny tcp any4 any4

volatile xlate deny tcp any4 any6

volatile xlate deny tcp any6 any4

volatile xlate deny tcp any6 any6

volatile xlate deny udp any4 any4 eq field

volatile xlate deny udp any4 any6 eq field

volatile xlate deny udp any6 any4 eq field

volatile xlate deny udp any6 any6 eq field

2KFQnbNIdI.2KYOU encrypted passwd

names of

local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

link Trunk Description of SW1

switchport trunk allowed vlan 1,10,20,30,40

switchport trunk vlan 1 native

switchport mode trunk

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

No nameif

no level of security

no ip address

!

interface Vlan2

nameif outside

security-level 0

IP 92.51.193.158 255.255.255.252

!

interface Vlan10

nameif inside

security-level 100

IP 192.168.10.1 255.255.255.0

!

interface Vlan20

nameif servers

security-level 100

address 192.168.20.1 255.255.255.0

!

Vlan30 interface

nameif printers

security-level 100

192.168.30.1 IP address 255.255.255.0

!

interface Vlan40

nameif wireless

security-level 100

192.168.40.1 IP address 255.255.255.0

!

connection line banner welcome to the Payback loyalty systems

boot system Disk0: / asa901 - k8.bin

passive FTP mode

summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

domain-lookup DNS servers

DNS lookup domain printers

DNS domain-lookup wireless

DNS server-group DefaultDNS

Server name 83.147.160.2

Server name 83.147.160.130

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

ftp_server network object

network of the Internal_Report_Server object

Home 192.168.20.21

Description address internal automated report server

network of the Report_Server object

Home 89.234.126.9

Description of server automated reports

service object RDP

service destination tcp 3389 eq

Description RDP to the server

network of the Host_QA_Server object

Home 89.234.126.10

Description QA host external address

network of the Internal_Host_QA object

Home 192.168.20.22

host of computer virtual Description for QA

network of the Internal_QA_Web_Server object

Home 192.168.20.23

Description Web Server in the QA environment

network of the Web_Server_QA_VM object

Home 89.234.126.11

Server Web Description in the QA environment

service object SQL_Server

destination eq 1433 tcp service

network of the Demo_Server object

Home 89.234.126.12

Description server set up for the product demo

network of the Internal_Demo_Server object

Home 192.168.20.24

Internal description of the demo server IP address

network of the NETWORK_OBJ_192.168.20.0_24 object

subnet 192.168.20.0 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_26 object

255.255.255.192 subnet 192.168.50.0

network of the NETWORK_OBJ_192.168.0.0_16 object

Subnet 192.168.0.0 255.255.0.0

service object MSSQL

destination eq 1434 tcp service

MSSQL port description

VPN network object

192.168.50.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_24 object

192.168.50.0 subnet 255.255.255.0

service object TS

tcp destination eq 4400 service

service of the TS_Return object

tcp source eq 4400 service

network of the External_QA_3 object

Home 89.234.126.13

network of the Internal_QA_3 object

Home 192.168.20.25

network of the Dev_WebServer object

Home 192.168.20.27

network of the External_Dev_Web object

Home 89.234.126.14

network of the CIX_Subnet object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the NETWORK_OBJ_84.39.233.50 object

Home 84.39.233.50

network of the NETWORK_OBJ_92.51.193.158 object

Home 92.51.193.158

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

the tcp destination eq ftp service object

the purpose of the tcp destination eq netbios-ssn service

the purpose of the tcp destination eq smtp service

service-object TS

the Payback_Internal object-group network

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

object-group service DM_INLINE_SERVICE_3

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

service-object TS

service-object, object TS_Return

object-group service DM_INLINE_SERVICE_4

service-object RDP

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

object-group service DM_INLINE_SERVICE_5

purpose purpose of the MSSQL service

service-object RDP

service-object TS

object-group Protocol TCPUDP

object-protocol udp

object-tcp protocol

object-group service DM_INLINE_SERVICE_6

service-object TS

service-object, object TS_Return

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

Note to outside_access_in to access list that this rule allows Internet the interal server.

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-list of FTP access

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list of SMTP access

Note to outside_access_in to access list Net Bios

Comment from outside_access_in-SQL access list

Comment from outside_access_in-list to access TS - 4400

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

access host access-list outside_access_in note rule internal QA

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

Notice on the outside_access_in of the access-list access to the internal Web server:

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

Note to outside_access_in to access list rule allowing access to the demo server

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list to access MSSQL

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

Note to outside_access_in access to the development Web server access list

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

pager lines 24

Enable logging

information recording console

asdm of logging of information

address record

[email protected] / * /.

the journaling recipient

[email protected] / * /.

level alerts

Outside 1500 MTU

Within 1500 MTU

MTU 1500 servers

MTU 1500 printers

MTU 1500 wireless

no failover

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm-711 - 52.bin

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (wireless, outdoors) source Dynamics one interface

NAT (servers, outside) no matter what source dynamic interface

NAT (servers, external) static source Internal_Report_Server Report_Server

NAT (servers, external) static source Internal_Host_QA Host_QA_Server

NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

NAT (servers, external) static source Internal_Demo_Server Demo_Server

NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

NAT (servers, external) static source Internal_QA_3 External_QA_3

NAT (servers, external) static source Dev_WebServer External_Dev_Web

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.10.0 255.255.255.0 inside
http 192.168.40.0 255.255.255.0 wireless
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 84.39.233.50
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.40.0 255.255.255.0 wireless
SSH timeout 5
Console timeout 0

dhcpd 192.168.0.1 dns
dhcpd outside auto_config
!
dhcpd address 192.168.10.21 - 192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
paybackloyalty.com dhcpd option 15 inside ascii interface
dhcpd allow inside
!
dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
dhcpd update dns of the wireless interface
dhcpd option 15 ascii paybackloyalty.com wireless interface
dhcpd activate wireless
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal Payback_VPN group strategy
attributes of Group Policy Payback_VPN
VPN - 10 concurrent connections
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
attributes of Group Policy DfltGrpPolicy
value of 83.147.160.2 DNS server 83.147.160.130
VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
internal GroupPolicy_84.39.233.50 group strategy
attributes of Group Policy GroupPolicy_84.39.233.50
VPN-tunnel-Protocol ikev1, ikev2
Noelle XB/IpvYaATP.2QYm username encrypted password
Noelle username attributes
VPN-group-policy Payback_VPN
type of remote access service
username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
Éanna attributes username
VPN-group-policy Payback_VPN
type of remote access service
Michael qpbleUqUEchRrgQX of encrypted password username
user name Michael attributes
VPN-group-policy Payback_VPN
type of remote access service
username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
user name Danny attributes
VPN-group-policy Payback_VPN
type of remote access service
Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
user name Aileen attributes
VPN-group-policy Payback_VPN
type of remote access service
Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
Aidan username attributes
VPN-group-policy Payback_VPN
type of remote access service
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
shane.c iqGMoWOnfO6YKXbw encrypted password username
username shane.c attributes
VPN-group-policy Payback_VPN
type of remote access service
Shane uYePLcrFadO9pBZx of encrypted password username
user name Shane attributes
VPN-group-policy Payback_VPN
type of remote access service
username, encrypted James TdYPv1pvld/hPM0d password
user name James attributes
VPN-group-policy Payback_VPN
type of remote access service
Mark yruxpddqfyNb.qFn of encrypted password username
user name brand attributes
type of service admin
username password of Mary XND5FTEiyu1L1zFD encrypted
user name Mary attributes
VPN-group-policy Payback_VPN
type of remote access service
Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
Massimo username attributes
VPN-group-policy Payback_VPN
type of remote access service
type tunnel-group Payback_VPN remote access
attributes global-tunnel-group Payback_VPN
VPN1 address pool
Group Policy - by default-Payback_VPN
IPSec-attributes tunnel-group Payback_VPN
IKEv1 pre-shared-key *.
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 General-attributes
Group - default policy - GroupPolicy_84.39.233.50
IPSec-attributes tunnel-group 84.39.233.50
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the pptp
inspect the rsh
inspect the rtsp
inspect the sip
inspect the snmp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect xdmcp
inspect the icmp error
inspect the icmp
!
service-policy-international policy global
192.168.20.21 SMTP server
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

ASA 2

ASA Version 9.0 (1)

!

Payback-CIX hostname

activate the encrypted password of HSMurh79NVmatjY0

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

Description this port connects to the local network VIRTUAL 100

switchport access vlan 100

!

interface Ethernet0/2

!

interface Ethernet0/3

switchport access vlan 100

!

interface Ethernet0/4

switchport access vlan 100

!

interface Ethernet0/5

switchport access vlan 100

!

interface Ethernet0/6

switchport access vlan 100

!

interface Ethernet0/7

switchport access vlan 100

!

interface Vlan2

nameif outside

security-level 0

IP 84.39.233.50 255.255.255.240

!

interface Vlan100

nameif inside

security-level 100

IP 192.168.100.1 address 255.255.255.0

!

banner welcome to Payback loyalty - CIX connection line

passive FTP mode

summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

DNS server-group defaultDNS

Name-Server 8.8.8.8

Server name 8.8.4.4

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

network of the host-CIX-1 object

host 192.168.100.2

Description This is the VM server host machine

network object host-External_CIX-1

Home 84.39.233.51

Description This is the external IP address of the server the server VM host

service object RDP

source between 1-65535 destination eq 3389 tcp service

network of the Payback_Office object

Home 92.51.193.158

service object MSQL

destination eq 1433 tcp service

network of the Development_OLTP object

Home 192.168.100.10

Description for Eiresoft VM

network of the External_Development_OLTP object

Home 84.39.233.52

Description This is the external IP address for the virtual machine for Eiresoft

network of the Eiresoft object

Home 146.66.160.70

Contractor s/n description

network of the External_TMC_Web object

Home 84.39.233.53

Description Public address to the TMC Web server

network of the TMC_Webserver object

Home 192.168.100.19

Internal description address TMC Webserver

network of the External_TMC_OLTP object

Home 84.39.233.54

External targets OLTP IP description

network of the TMC_OLTP object

Home 192.168.100.18

description of the interal target IP address

network of the External_OLTP_Failover object

Home 84.39.233.55

IP failover of the OLTP Public description

network of the OLTP_Failover object

Home 192.168.100.60

Server failover OLTP description

network of the servers object

subnet 192.168.20.0 255.255.255.0

being Wired network

192.168.10.0 subnet 255.255.255.0

the subject wireless network

192.168.40.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the Eiresoft_2nd object

Home 137.117.217.29

Description 2nd Eiresoft IP

network of the Dev_Test_Webserver object

Home 192.168.100.12

Description address internal to the Test Server Web Dev

network of the External_Dev_Test_Webserver object

Home 84.39.233.56

Description This is the PB Dev Test Webserver

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_2

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_3

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_4

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_5

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_6

service-object MSQL

service-object RDP

the Payback_Intrernal object-group network

object-network servers

Wired network-object

wireless network object

object-group service DM_INLINE_SERVICE_7

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_8

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_9

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_10

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_11

service-object RDP

the tcp destination eq ftp service object

outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

Note to access list OLTP Development Office of recovery outside_access_in

outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

Comment from outside_access_in-access Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

Note to outside_access_in access to OLTP for target recovery Office Access list

outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

Note to outside_access_in access from the 2nd IP Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

NAT (inside, outside) static source Development_OLTP External_Development_OLTP

NAT (inside, outside) static source TMC_Webserver External_TMC_Web

NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

the ssh LOCAL console AAA authentication

Enable http server

http 92.51.193.156 255.255.255.252 outside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 92.51.193.158
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 92.51.193.156 255.255.255.252 outside
SSH timeout 5
Console timeout 0

dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal GroupPolicy_92.51.193.158 group strategy
attributes of Group Policy GroupPolicy_92.51.193.158
VPN-tunnel-Protocol ikev1, ikev2
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 General-attributes
Group - default policy - GroupPolicy_92.51.193.158
IPSec-attributes tunnel-group 92.51.193.158
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
: end

Hello

There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

Here are a few suggestions on what to change

ASA1

Minimal changes

the object of the LAN network

192.168.10.0 subnet 255.255.255.0

being REMOTE-LAN network

255.255.255.0 subnet 192.168.100.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

Other suggestions

These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

PAT-SOURCE network object-group

source networks internal PAT Description

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

no nat (wireless, outdoors) source Dynamics one interface

no nat (servers, outside) no matter what source dynamic interface

The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

network of the SERVERS object

subnet 192.168.20.0 255.255.255.0

network of the VPN-POOL object

192.168.50.0 subnet 255.255.255.0

NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

ASA2

Minimal changes

the object of the LAN network

255.255.255.0 subnet 192.168.100.0

being REMOTE-LAN network

192.168.10.0 subnet 255.255.255.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM.

Other suggestions

PAT-SOURCE network object-group

object-network 192.168.100.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

Hope this makes any sense and has helped

Remember to mark a reply as the answer if it answered your question.

Feel free to ask more if necessary

-Jouni

Cisco ASA 5510 + license + AIP - SSM

Hello.

I have this box.

I have a few questions about it.

(1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

(2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

(3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

(4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

Please help me.

(1) you must Smartnet in order to download the software from the download from cisco.com site.

(2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

(3) Yes, the basic license is OK for the AIP module.

(4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

Hope that answers your questions.

I can't boot on my Cisco ASA 5505

Hello;

I am facing a problem with my cisco ASA 5505 firewall. When I connect my cable to console the firewall to start setting firewall load and stop until the copyright. ICN can't access to the firewall to view the configuration. I start also with Rommon but I am facing the same problem. Does anyone have an idea of this problem and can help me?

Please, it's so urgencly!

Hello

What version of software is on the asa and the amount of memory is on the device?

Thank you

John

Cisco ASA of firepower

Similar Questions

Is there a way by which we can block all connections from a country on Cisco ASA, without us manually define an ACL.

Maybe you are looking for