Cisco first 2.1 / 2.2 support for Cisco ise 1.3?

Similar Questions

• Changes in prices for the contracts of Support for Cisco IDS/IPS

  Nice day

  My boss asked me if there is no value added regarding Cisco's recent move to charge separately for hardware and software support for IDS/IPS product line.

  Other than what is obvious (need software support for updates of signature, need of material support in case something breaks), I'm having a hard time to provide a response.

  Can anyone suggest what is the increased value, other than annual recurrent costs more we get as a result of this change of license?

  Also, was there any release press or other notice to the client about this change?

  I am at a loss...

  Alex Arndt

  Alex,

  Cut through the spin and the hype... the software support allows us to finance a development team dedicated to signature, which has improved our signature rejection rates and response times. In addition, it is allowing us to expand our coverage to keep IDS 4.1 to get the support of the signature. It is contrary to our previous policy which would have seen 4.1 updates to signature cut shortly after 5.0 released.

  A side effect of this is that our development team is now free to focus on the development of the feature, and you will see more updates, more often.

  Can't comment on press releases and others, they make your head spin my ;)

  Scott

• I get it during the installation of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  I get this message when installing an upgrade of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  Warning: "Adobe software real failure of Validation...". » | Windows

• Why K5200 Quadro card from Nvidia does not appear as a map taken in charge for after effects CC 2014? It is listed as supported for first Pro CC 2014.

  I am putting together the specs for a Dell workstation that I use to make Adobe CC work, including video with After Effects and Premiere Pro. My computer expert worries that the card Quadro K5200 I want to have the system is listed as supported for Premiere Pro CC 2014, but that it is not listed as supported for after effects CC 2014. Are there problems of compatibility with this card and EI?

  Thank you!

  stevemctee wrote:

  I enjoy the conversations of the sidebar and it's valuable information, but I'm really hoping to hear from Adobe on why this card is not listed, supported by the AE.

  Oooh, I can answer this too!

  Development and release of the CC, they do not work with the rendering engine raytraced we did at all (except in the align each version for compatibility reasons), so no more cards have been (or is going to be) tested and added to the white list.

  It may be a bit before someone with the official logo of has is available in. This is a user forum. We are grateful that Adobe people push their heads in many (seriously, gets it the AE Forum is a lot of love by considering how tiny the AE team), but sometimes it can take a while so that they appear. (Especially if some of them are on holiday). That's why they have people like us; We cannot have has, but we have M, V and P

  Speaking of the integration of C4D: when I recently visited the offices of the Adobe team, I must have a look at some of the new technology, they are working on future versions. I am very pleased of the future development of the AE. The lines between 3d and compositing are really starting to fade. Some of the things that currently lack us (expressions to control the animation of models C4D, for example) will be addressed.

  Now, if you plan to do a lot of work in 3d which is most often the titles and that sort of thing, I think looking at the 3d or 3d Zaxwerks Invigorator element. Latest version of the item makes it extremely fast given it's beautiful, it can look. It's amazing, really. (And it uses the GPU!)

• Satellite C870 - 1 H 2 and support for virtualization

  Hello

  I am (was to) buy a Toshiba Satellite C870 - 1 H 2 (from amazon.co.uk).
  The specifications look ideal for me, but at the last moment, I thought to check if VT - x extensions are supported.

  I know that the processor supports extensions (as detailed here: [http://ark.intel.com/products/71465/]), but I know also that the extensions are often not enabled (or there is no option in the BIOS to enable them).

  The expression "Virtualization Technology" (which is present on other pages of the specification) is clearly absent from the plug laptop here: [http://www.toshiba.co.uk/discontinued-products/satellite-c870-1h2/].
  I saw some comments that suggest the Satellite * Pro * series usually provides the support for virtualization, but it always seems to be missing on many current models of Pro's specifications.

  I don't know why the C870 would not support VT - x, when we know that his material, but the specifications indicate that this is the case. On the other hand, I found no references to people complaining about the lack of VT - x support.

  So my question is, the Satellite C870 - 1 H 2 actually does support VT - x, or not?
  (and if not, because it takes just a very small piece of code BIOS, why not?)

  Thank you

  > The same issue applies. These models are supported virtualization

  VT support is always depends on the CPU built in Notepad. But you mentioned it in the first post.
  According to the page of the Ark from Intel, the Intel Pentium 2020 M processor supports Intel Virtualization Technology (VT - x)

• WEBCAM HP HD 3100 want support for windows 8 pro camera app

  Hi, this is first time I write a post, because I am not able to find any support for my HP WEBCAM HD 3100 for windows 8 pro , with windows 8 I have a camera app name , and what problem I face is that whenever I want to use my webcam with this application, the error message has just been not detect camera , I went for the support of the windows forum 8, they said to refer to the manufacture for driver problem, and there is not the issue, that the software HP HD 3100 driver installation is ARCHSOFT and ARCSOFT I VISION which I had already installed on my PC, the webcam works perfectly with other services webcam chat webcam with another application , Its just that it does not work with the individual CAMERA app.

  Please tell me what I can do to remove this problem with the camera application.

  Respect of

  Amit

  Yes, it is compatible with Windows 8.1 since it works in my laptop even without installing the supplied software suite. I had to install it for Win XP but win 8 pilots inside to operate the camera. Try it on a different usb port. Remove and uninstall the software from the Control Panel programs and do a system restart. Let the appliance must be installed by windows with it is in built drivers. This would remove any incompatibility between Windows and drivers you have installed.

• Support for Windows 10 in Qosmio X 70 - has

  Hello

  I have a X 70-a, and according to the plan of Toshiba support, full support for Windows 10 only will be available January 31, 2016 ('coz that's what you get when you pay 1500-2000 euros for a cell phone, right?)

  Any who tried to win 10 on a similar laptop? Personally, I don't see what is the hold up and do not understand why they need half a year to offer support because most of the drivers Windows 8.1 should be available (assuming that they were well written in the first place).

  "That's what I get for a laptop of 1,500 euros" is exactly what I had in mind when searching for this Web site in order to get my windows 10 drivers only to find out that I am not on the priority of Toshiba.

  Keep the windows 10 update has an option to restore your old windows for a month (available in recovery at startup menu), I took the plunge by installing Windows on my 770 - 13F X 10.

  Here are the problems I encountered (I guess I'll find out later):

  -Windows installed a bad driver for the wifi adapter (Qualcomm Atheros) that makes the BSOD on startup. I manually installed a Windows 8.1 driver found on a non official (atheros.cz) in safe mode, with a second PC and a USB key.
  Win 10 then start over, but I can not activate wifi, both front panel and fn + F8 key for wifi doesn't seem to work. If anyone has a solution or just a hint...

  -The main Win 10 Search bar doesn't seem to be functional. It's weird and annoying.

• What type of support for labview usb protocols?

  Hello guys I want to connect a device to your pc via a usb port and I want to use labview to analyze the data.

  But first of all, I would like to know what usb protocols support for labview.

  USB, USB CDC and other TMC?

  I ve read labview recognizes a raw device to the usb, but what is? Is it VI to read and send data, or I have to do? If these VI exists, they do the handshake? flow control?

  Thank you.

  Please read the chips and have a look at the USB specification (it is linked to in the nuggets).

  TMC, CDC, MAss Storage are all built on the basic USB protocols.

  LabVIEW has no built-in support for one of these classes of devices except Test and measurement.

  Shane

• Need help, contact the support for halo!

  Hello, I bought halo, when it first came out a long time ago. Thing is I was new with computers and I accidently threw the cd key (it was somewhere stupid on a pamphlet cd) in any case when it happened a couple of years. I asked for support, which was easy to get back in the day. in any case, instead of the person who gives me a cd key invalid.

  Someone sent me an email to annoynymous indicating.

  Hey I heard from a friend of my friends at microsoft you cd key. He gave me a large number of them and told me to say that the question was fine and close the case. I was always with computers and I had no idea he gave me fake cd keys.
  one of them worked but now does not work.
  How to get a real cd key? I don't want to pay 20 dollars for a game that I already bought.
  I can't find a way to talk about support technique microsoft.  They have support for halo 2

  I still have my id cd and produced any help would be greatly appreciated! P.s. I still mail lol

  Hello

  You can refer to the method 4, from the link below: Microsoft Games and mapping: invalid product key:http://support.microsoft.com/kb/812467

  I suggest you post it in the slot for the best support forum:http://forums.gamesforwindows.com/default.aspx?GroupID=3

  See also:http://support.microsoft.com/gp/cp_halo_master#tab0

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• no support for dv6768se

  No update for the dv6000 BIOS

  Careful, HP has turned to deception. I bought thousands of dollars worth of HP products. I recommend the purchase of HP in my official duties as a Director of engineering. However, I was disappointed by the performance and support in all cases. I have two machines where I couldn't write media to recover. The most recent is with my Pavilion dv6000 laptop. It has the problem of restarting which may be related to problems of overheating GPU NVidia. This is known issue and HP must have decided to let go without worrying about the goodwill of its customers.

  The details for the latest incident are:

  Seeking support, I called a number found on the site of HP. I was charged for the support of a partner HP from a foreign land only to make things worse.

  They say that when I called HP they Mobile is unsupported and is obsolete. So, why is me she charged?

  My flag will not re-start. The symptoms started he did a software update from Microsoft. The update restarted my system and suspension system. After a stop forced (pressing the power button for 5 seconds), I had a soft recovery screen. I did a restore and it restarted. It hung again. This time, the indicated recovery screen I couldn't move forward and to contact support.

  I tried to get it back to the factory setting. This has seemed to work until I did the updates and tried to restart the machine. It hung again. I made the diagnosis of HW, but diagnostic tests indicated no problems. Analysis of disk of Vista also no problem.

  Before I looked for support I found that instead of restart, if I made a stop, I could limp thought enough of the upgrade to Windows 7. However, the question remained, and she seemed to be associated with HW. That's when I called HP support.

  First of all, I told them (ITechLine) was associated with HW and I didn't not need remotely diagnose my machine. They insisted so I spent a day watching a tech do the antivirus scans and scan disk. Later, they said they had solved the problem, but the technology that has been doing Diagnostics admitted that the original question seems HW and remains.

  How I got the number of ITechLine from the HP website. May have been my mistake, and a better number could be found on the HP website. The loss of time can be, I think, a concealment deliberate by HP.

  Later, I called enough people at HP (even in a foreign country) to find the HP had decided to abandon the support for my laptop and I couldn't support or portions of their share for this machine. The person said that the technology was obsolete. It is also darkening; Since a SATA drive for this my machine could be found for less than $50 and would have more than twice the capacity. In fact, I could buy a new memory 2 GB SODIMM, a new hard drive and a new battery for less than $90. Phone support charged $149.

  I have a few web searches to find the GPU NVidia overheating problem was probably the cause. Then, I disassembled the laptop to clean the cooling fan. The reboot problem was considerably reduced. I can restart 5 out of 6 times, which leads me to believe that it is the GPU overheating problem.

  However, now I can't use the optical drive to start the Windows 7 support. It does not show in my computer. Also, I can't write recovery media using the internal optical drive. I knew it is the bios, because one of the stages that I found on the web had to reset the cmos to the original. I see that is not the most recent. By going to the HP site for the update of the bios, I find that they no longer have the update and my machine does not get detected by their auto detect process. Forgot it that they did the laptop.

  So, I have a laptop of brilliant almost new look that will not work and is unsupported. It is obsolete, even if the State of the industry has not really progressed for laptops. It is Wi - Fi enabled with a large screen and could run all the latest SW until 5 days ago. It is too light to be a doorstop good, so it is useless. All I can get from HP is denial, disappointment and a dress (with a foreign accent).

  Being an EE, I thought that HP a tester has been great and that HP would be able and honorable. It's the end of an era.

  Someone know where I can get the free bios update? It's not worth spending a lot of money after bad to pay for a service update of the bios.

  It is a forum for users of peer-to-peer support for HP products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Here are the specifications of your HP Pavilion Entertainment Notebook computer dv6768se. Based on the information contained in the specification, this model is about 5 to 6 years. Years of the computer, this laptop is very certainly obsolete. You can find the update of BIOS, drivers and software for your computer on the HP support site at HP Pavilion dv6768se drivers and downloads. The most recent BIOS listed is;

  Description;
  This package provides an update the system BIOS. The update is installed on models of laptops using a supported Microsoft Windows Operating System. A reboot is required to complete the installation.

  Communicate the details;
  Exit the: 2011-03-30
  File name: sp52477.exe [1/1, 3.09 M]
  Version: F.34
  Compatibility: (MUST BE INSTALLED UNDER)
  Microsoft Windows Vista
  Microsoft Windows Vista (64-bit)

  Fix/enhancement;
  -Fixes a problem where the system stops unexpectedly in response and a warning window 0 x 124 appears when the laptop was turned off abnormally, then restarted.

  Please send Bravo

• no support for cm1312 MFP scanning

  Product - HP CM1312 MFP color laser printer

  Operating system - OS X Lion

  HP Director does not open, says he is damaged or incomplete.  System report says no support for scanning.  Have loaded the software twice, still no luck.  Connected to ia USB cable

  Hello

  Make sure that you install the software of the Lion... install any previous software will be appear to be installed but is not functional:

  Firstm repair disk permissions in order to deny any permissions issue related to the installation:

  1. 1. open the Applications folder.
     2. go to the Utilities folder.
     3. double-click on disk utility.
     4 Select the hard disk that contains the boot volume.
     5. go to the first aid tab and select Repair disk permissions.
     Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete. :
  2. Download and install the Lion below:http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=t2-100706-1&taskId=135&swLang=8&swEnvOID=4114&prodNameId=3558903&lang=en&cc=us&mode=2&

• Extreme SSD 120GB - No. TRIM support for Linux later? $150 wasted?

  I am a customer of Sandisk's long-term and generally been happy with their products.

  My favorite and the only OS is Linux, like the millions of PC users, laptop, Tablet and smartphone world. I'm about to take delivery of a brand new Sandisk Extreme SSD 120 GB. This is my 2nd SSD (the other being of Kingston). I just found this review online (newegg.com) about current support for Sandisk Extreme SSD TRIM for Linux:

  "Cannot support a topping on LINUX. I also use EXT4 throw tag in/etc/fstab and it does not work. I sent Sandisk. They said: "I understand that you were not able to activate the TRIM on your SSD 120 GB extreme linux system command. We are sorry for the inconvenience this problem may have caused. »

  Then I remember seeing this in own of Sandisk SSD info online:

  "Any operating system can be installed on an SSD. There is NO compatibility problem with regard to the operating system. Windows, Mac, Linux, Unix any version or BACK can be installed on an SSD.
  Certain features such as the PLATE only are supported in mode native on the latest operating systems such as Windows 7 and Mac OS 10.6 and higher. »

  I'm worried. First of all, I have always use the latest version of Linux, continually updated to day and make all the necessary preparations for the maximum performance of SSD (including changes to operating and fstab AHCI). Then my other SSD worked flawless since (installed 6 months ago) news including the TRIM under Linux.

  Then I read elsewhere that Sandisk provides no SSD firmware still updates (?). Is this correct?

  If so, then Houston, we have a (major) problem. Product not suitable to use? Misrepresentation of product? Inadequate technical support? Incomplete engineering front of dumping on the market?

  I might be worrying unduly. Heck, I really hope someone can help me, clarity and TRIM unlimited direct. Can I use my new Sandisk Extreme SSD as my other player, without product development stressful of Sandisk. (Before I drop the fanboys Win7 and Mac, Linux is also valid in the real world like any OS corporate-drone. Heck one day you too could see the light...)

  Good news all around. Extreme SSD arrived and installed without a hitch. Also received a number of useful answers E-mail of Support technical Sandisk (thanks, notably, spear, who approached the plate). In short, if you have a recent Linux kernel installed, opt for the filesystem ext4 on both / and / Home. But first of all to be absolutely sure that you have selected the AHCI option in the section of the BIOS of your motherboard SATA mode. (Flashing the latest mainboard BIOS should also help.) So to allow TOPPING Linux offers edit you your file/etc/fstab to include the "noatime" instructions and "throw" in the lines making reference to / and / Home. Save and you should be good to go. So to answer my own original doubts - TRIM is supported for latest Linux OS provided that you follow the installation process. I lose $150? Probably not, but only time and toggle NAND will tell!

• I constantly get a message saying "no support for IE8 and lower grades.

  * Original title: error message?

  I get constantly a message saying 'no support for IE8 and below' and its asking me to upgrade my browser... I don't have any idea what to do as a novice PC user... help please :(

  Hello

  Vista came with IE8 and the updated browser he received was the only one that ever. for IE9.

  But you need Service Pack 2 to install IE9 on Vista.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Your best option would be to install Firefox, etc. on Vista.

  See you soon.

• Need support for recovery after power failure

  I had an emachine for awhile and finally a thunderstorm came around and he pulled my TV and my computer, that my computer does not problem but it goes to the installation as the hard drive has been cleaned that there is a lot of junk on it somehow so I decided to reinstall and at first he said "no device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok. "im stuck and don't know what to do.

  Powre failures will often damage hardware, but also software.

  http://www.eMachines.com/support/product_support.html

  Contact Support for their eMachines recovery media.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• I need a list of devices supported for VSOM 6.3.2

  I need a list of devices supported for VSOM 6.3.2.   The link I had previously recorded with this info for different versions of VSOM is no longer there is a world of Cisco.com.  Help, please.

  Thank you.

  I think that the list you're looking for are accessible through the portal of emerging Cisco Technologies to:

  https://www.ciscoet.com/resource/VSM-632-MR2-supported-devices-list

  I hope this helps!

  Scott Olsen
  Solutions specialist
  Bulletproof Solutions Inc..
  Web: www.bulletproofsi.com