Cisco first LMS - identity

Similar Questions

• Non-existing connections in Cisco first LMS 4.2.4

  Hello

  We had strange connections in LMS 4.2.4 and earlier versions, even back at LMS 3.2.1. Even if I delete connections, they reappear as if the connection were present.

  

  

  Sometimes, it is related to a change of interface of 1 G to 10G and in some cases, any other device... .but not always.

  It hurts my eyes, I look at this, so I hope that some of you know the reason, or better yet, the solution.

  Thanks in advance ;-)

  Hello

  Seems to be corrupted the database for ANI.   what I would say is to reset the database to ANI.

  Note: ANI database contains no historical data, reintilalizing so there won't be a problem.

  the steps are:

  1. stop the daemon manager

  2.

  windows:NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
  solaris\linux:
  /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI
  3 start the daemon manager to wait for 10-15 min, and then start a new DATACOLLECTIOn followed Acquistion of user tracking.
  
  Hope, he'll take care of the question please - Afroz [evaluate the useful post] *sides encourage contributors *.		   

• Issue of integrating Cisco first Collaboration insurance LDAP

  Hello

  I 9.0.0 - 24376 Cisco first coverage of Collaboration with lot of fixes 3, and although I added the LDAP protocol successfully to the server of the CPCA, and when I do the connection test it gives me connection is successful with the LDAP server, then I added users to the management of the users using the same user name as the user account on the LDAP protocol and LDAP user check.

  but when the user tries to connect to the CPCA using his LDAP account an error message saying that the user name or password is incorrect.

  If the ideas please?

  Insurance server connects with CN, not sAMAccountName in the LDAP server, make sure that you type in the user name as "John Doe" instead of jdoe.  Check if it works.

• the first LMS 4.2 is available for purchase?

  I have some SMB switches must be managed. I found the last premium Infrastructure 3 is unable to support SMB switch, but first 4.2 LMS can support.

  I knew LMS 4.1 was replaced by Prime Infrastructure, but later LMS version is 4.2, so I don't know if LMS 4.2 is available for purchase. I can't find order guide for LMS4.2.

  What should I do?

  It is not available for purchase, but if you buy premium Infrastructure 2.2 (NOT the last 3.0), you will also have a license for first LMS 4.2.

• Cisco first Infrastructure 2.2 API GET Interfaces

  Hello

  I am using Cisco first Infrastructure 2.2 and I am trying to get some info of the API in order to build a model.

  But I can't find how to get the name of all the interfaces of an IP address from the device. I tried many queries, but none of them is what to expect. Is there a way interfaces?

  Thank you.

  Guillaume.

  Hello, don't 'SE InventoryDetails' gives you what you need? I believe you can use the features of REST to filter down to only the devices you are interested.

• Collection of newspapers from Cisco first Infrastructure

  Hello

  I am currently working in integrating Cisco first Infrastruture with Qradar siem tool.

  Can someone help me out below questions:

  (1) how and where is the paper stored in Cisco first. ?

  (2) newspapers contains logs first Cisco devices manages?

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Hello

  (1) how and where is the paper stored in Cisco first. ?

  / opt/CSCOlumnos/logs

  (2) newspapers contains logs first Cisco devices manages?

  AS FAR AS I KNOW,

  Infrastructure main Syslogs are directly read the 514 and then filtered udp port
  , no SEV1 and SEV2 syslogs are removed and not be exchanged from db. The
  syslog messages will not be saved in files.

  So far, PI support only syslog SEV 0,1 and 2.

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Unfortunately, this feature is not there in PI so far.

  Thank you-

  Alya

  Ratings encourage contributors *.

• Impossible to get the specific features of cisco in LMS syslogs

  Hello

  It's about a problem that we face with our LMS 3.2.1. We cannot get specific cisco devices syslogs, while we are able to get the rest devices syslogs. one you suggest what would be the exact reason for this and the troubleshooting steps.

  Thanks in advance,

  Raja

  Hello

  The first thing I would say is to make sure that you have these devices configured to send the syslogs to that specific server. See config below:

  3725B - CR - NMS (config) #logging host?
  Host name or A.B.C.D IP address of the syslog server

  If that is already set up, please make sure that syslog messages are on the server. Create a message simple syslog and check the syslog.log file located in NMSROOT/CSCOpx/log to make sure it's written there. You can also run a capture of packages to confirm the foregoing. If you have this installed on Linux/Solaris, check the syslog_info file (/ var/log /).

  You can generate a test syslog as shown below:

  3725 B-CR-NEM #conf t
  Enter configuration commands, one per line.  End with CNTL/Z.
  3725B - CR - NMS (config) #exit
  B-CR-NMS 3725 #.
  * 03:35:42.613 13 Oct: % SYS-5-CONFIG_I: configured from console by admin on vty1 (192.168.10.197)

  NMSROOT is the LMS installation directory

  Let me know the results.

  Allen has.

• Cisco first Collaboration - what is free

  Hi guys,.

  What is the free version of privileged collaboration of Cisco? I have to deploy for a client and I saw the first Collab provisioning version available for download on Cisco, is it free?

  Can provide you any document that says the same thing. Also the special collaboration of Cisco can be deployed in HA mode using two virtual machines?

  The free versions are called Standard versions, rather than the paid versions, called advanced versions.  The law requires CUCM 10.x and later, using CUWL license and is covered in the commercial documentation of CUCM.

  There is not much difference between PCP standard and advanced design.  The main reasons to choose Advanced if you have a several cluster environment. Standard does support a call (CUCM editor) or GCE and a single message processor (CUC or CUE).  The most frequent reason is that in advanced you can delegate the management of orders for different groups of users (areas of the CFP) to different administrators.  Standard mode does not allow this. There are some additional differences as the API to the North is on in advanced as well as a workflow of order process sometimes required by large companies. Those are the main differences.

  HA is another story.  There is a general process of HA supported by the BU of PCP and PCA using VMWare HA.  HA in general was not popular with the CFP because most of the people do not believe it is necessary and choose instead a different path for the resilience. Most of the deployment in a way people distributed (app + database of VMs) and make the system of database as fault tolerant as possible/necessary using characteristic database process in the industry. The application server uses VMWare HA or FT to come up if the configuration hardware server dies for some reason any. Or is it just launched somewhere else.

  CFP has the ability to re-synchronization of network UC, UC network will continue to operate without running of PCP and the native interfaces of UC apps can still be used (PCP can catch up with the changes later), the need to spend more money and time to configure HA is difficult to justify in most cases.

  Concerning

• Is there someone out there who has built-in Cisco first optical 9.3.1 the Ciena 6500?

  We have an upcoming project where it looks like Ciena is going to be the winner.  Currently, we run first Cisco optical 9.3.1.  Is there someone out there who is actively control and configure 6500 CPO Ciena DWDM equipment?  If so, are there drawbacks, gaps?  All things good?

  Thank you

  Steve King

  Hello
  Unfortunately Ciena unsupported in the Conference of the PARTIES at all. Check it please first Cisco document view Supported Devices, 9.6.3.

• Tools of Cisco first conjunction and multiple Clusters

  I'm on the underside of the UC Applications:

  CUCM - 10.5.2
  CUC - 10.5.1
  REB - 10.0.2
  UCCX - 10.5.1
  CUPS - 10.5.2

  I use the below first of Collaboration Tools to manage

  Deployment of privileged Collaboration - 10.5.1
  Insurance of Collaboration - 10.5.0
  First supply of Collaboration - 10.5.0
  First Manager of licenses - 10.0.1

  I'm looking to install a different Cluster CUCM with connecting the unit and Cisco Unified presence running the version 11.X.

  I need to strengthen my first to more management tools later in order to manage the two clusters?  Will it affect my 10.5.X apps if I do?

  CJ

  You will need 11 PC. x to pick up new support of CUCM 11.x.

  I would upgrade to the last PC which is 11.5 for APC and 11.2 of the CFP (although the CFP 11.5 released this month).  10.x apps will not notice the change.

  Follow-up will show the results of these clusters of 10/11 and PCP knows the difference between the settings and services on groups of 10/11.

  Concerning

• Cisco first Infrastructure 3.1.3 - patching

  Hello

  a customer has installed a traditional life cycle license, ICC running the 3.1 version. We would like to upgrade to version 3.1.3.

  According to Cisco, ICC 3.1.3 supports the licensing model based on the chips for the cycle of life and insurance licenses. License consumption is based on symbolic weight by device type.

  ICC 3.1.3 takes to support the generation of a file single license with rights acquired to manage existing devices without having to purchase additional licenses. This special privilege is provided to existing customers as a one-off during the first Infrastructure 3.1.3 update installation.

  Does someone of you could advise me the way how to obtain such a license?

  Thank you very much.

  Jozef

  There is no need to change the license type if your existing licenses extend on your managed devices.

  I have updated three separate facilities from 3.x PI to 3.1.3 without changing the type of license.

  If you want or need to do, then open a TAC case, asking permission to support and licensing team will take care of him for you.

• Cisco first Infrastructure 2.0 is compatible with the Hyper-V environment?

  On version 2.0 first Cisco Infrastructure. It is now possible?

  First requires ESXi:

  http://www.Cisco.com/en/us/docs/net_mgmt/Prime/infrastructure/2.0/QuickStart/Guide/cpi_qsg.html#wp46865

• CISCO FIRST INFRASTRUCTURE 2.2

  Dear Sir.

  We have purchased preferred infrastructure cisco 2.2 and have just download the software:

  2.2 preferred infrastructure the physics of ISO Image (from GEN 1 device only)

  PI - APL - 2.2.0.0.158 - 1 - K9.ISO

  This is the first time, we will install the first cisco.

  the user has a server with all material specifications recommend for GEN1 and the installed operating system is WINDOWS 7 Professional.

  2.2 first cisco infrastructure will run on this server without any problem?

  awaiting your response earlier.

  Roger

  N °

  This image will only install and be supported on the Cisco Gen 1 (hardware OEM IBM) brand device.

  ISO is self-contained and designed to be installed on this server bare metal only. It includes a distribution of Linux RHEL custom as the operating system. It has built in and not configurable pilots to accurate NICs, hard disk drive controller and configuration etc.

  You should be getting version 3.1 in the form of open virtual appliance (ova) and the installation on a server with VMware ESXi.

• Support for non-Cisco in LMS 4.1 devices

  Hello! How could I import MIB of third party for my devices? Y at - it a manual/instructions to work with devices other than cisco?

  Hello

  As mentioned earlier, if the device is not supported, you cannot manage it with LMS, this is true for most of the modules. UM is the only one who can support the third-party devices correctly.

  Concerning

  Farrukh

• Cannot add WLC 5508 7.2.111.3 Cisco first Infrastructure 2.0

  Although the list of the Cisco Infrastructure compatibility matrix first on this 7.2.111.3 is supported for PI 2.0

  I'm not able to add the controller to the PI 2.0.

  The State of accessibility has always shown "Unknow" and the situation always SNMP "no answer for SNMP Get."

  There is no firewall between the WLC and PI.

  And ping test shows that it is accessible.

  If I try to add the controller to port managers (I know it's not working, but I want to try the accessibility), the State of accessibility showed "Reachable" but the SNMP State always demonstrated error.

  And if I use some SNMP test software to test the SNMP port. SNMP can be cited.

  I try down below the "Maximum VarBinds get PDU" but no luck.

  Something I can do to solve the problem?

  Hi, please check on wlc 5508:
  have you enabled snmp on wlc?

  mrncciew.com/2013/02/14/configuring-SNMP-on-WLC/

  Concerning
  Please rate if this can help

  Sent by Cisco Support technique iPhone App