Cisco utilities - RHEL6

Similar Questions

• Is there an SSH for Cisco LMS interface?

  Hello

  Is there an SSH for Cisco LMS interface? Now when I try SSHing in I'm just met a guest for ciscoworks scp. I am trying to access so that I can add new devices by using the dcrcli command without having to RDP in the machine that is running on LMS.

  In addition, is accessible for LMS api soap from the outside? I tried to make it work using soapui but ended up which put on hold after that I read somewhere else that the API is not available outside, I thought I'd check here if to see if it's actually true.

  Thank you

  When LMS runs on one machine virtual ('soft machine'), ADE-OS based on Linux is exposed through ssh.

  When LMS is running on a windows server, there is no interface to ssh for the application of the LMS.

  In this case, the command line utilities are more or less accessible via a Windows command prompt that would require the native console or server access to the RDP.

  The different functions available cli are detailed here:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/ciscoworks_lan_management _...

  I've never seen someone try to use LMS via the API if you are in a very small set of users there. LMS being in its sunset, I wouldn't hold much hope for us to open.

• Trouble getting a Cisco 2600 series AP to stay connected to WLC 5508

  Hello

  I recently loaded the independent our old APs upgrade to LWAPs.  We have a WLC 5508 to our Virtual Co - Lo and I use Flexconnect to accommodate local switch and dhcp on our sites.  I have updated more than 50 APs and joined them to the controller.  These include only the 1130AG and 1240AG models.  However they work perfectly and stay connected to the controller.  I'm having is with a new batch of 2600 series APs stay connected to the controller.  I tried to do research in what may cause disconnect it but have yet to find a solution.  I use DNS to resolve queries for CAPWAP & LWAPP APs to the controller on our EXTENSIVE network.  Read other messages I thought that this is perhaps a problem with packages to drop but have had our provider that manages Sonicwalls at both ends of the WAN confirm for me that there is no packet loss.  Here are the logs that I collected through the puttty of the WLC & AP.  Any help would be greatly appreciated.

  AP, I do the test on:

  NAME: "AP2600', DESCR: 'Cisco Aironet 2600 Series (IEEE 802.11n) Access Point.

  PID: AIR-CAP2602I-A-K9, VID: V01, SN: FTX1740J8V1

  WLC in question:

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 7.3.112.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27

  Build Type....................................... DATA + WPS

  System name... wificontroller

  Location of the system... Corp

  Contact System... Net engineer

  ObjectID of system... 1.3.6.1.4.1.9.1.1069

  Redundancy mode... People with disabilities

  IP Address....................................... 10.250.32.8

  Last Reset....................................... Software reset

  Time system... 190 days 3 hours 34 minutes 24 seconds

  Location of the time zone of the system... (GMT - 5:00) Eastern (USA and Canada)

  The country is set... USA - United States

  Operating environment... Utilities (0 to 40 ° C)

  Limits the internal temperature alarm... 0 to 65 ° C

  -Other - or ITU (q)

  ... Internal temperature 38 C

  Outdoor temperature... + 20 C

  Fan Status....................................... Ok

  State of 802. 11 b network... Activated

  State of 802. 11A network... Activated

  Number of wireless LANs... 14

  Number of Active Clients... 71

  Built-in MAC address... C8:9 C: D: 8 1: 52:E0

  Power supply 1... Currently, OK

  Power supply 2... Absent

  Maximum number of taken access points supported... 100

  Here is the result which leaves on concluded that the AP joins the WLC for a short period and then goes offline

  WT-4thFlr-AP3 #.

  * 15:42:04.419 Dec 14: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST

  ., 3)

  * 15:42:11.443 Dec 14: EVT-4-AVT %: write flash: / done event.capwap

  * 15:42:11.483 Dec 14: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode

  * 15:42:11.487 Dec 14: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

  * 15:42:11.487 Dec 14: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.250.32.8:5246

  * 15:42:11.571 Dec 14: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.

  * 15:42:21.575 Dec 14: % 3-CAPWAP-ERRORLOG: MWAR selected ' wificontroller'(index 0).

  * 15:42:21.575 Dec 14: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 15:42:12.000 Dec 14: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246

  * 15:42:14.303 Dec 14: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.250.32.8 peer_port: 5246

  * 15:42:14.303 Dec 14: % CAPWAP-5-SENDJOIN: send request to join 10.250.32.8

  * 15:42:15.127 Dec 14: "Promiscuous" from Ethernet mode

  * 15:42:15.535 Dec 14: LWAPP-4-CLIENTEVENTLOG %: OfficeExtend Localssid recorded Flash AP

  * 15:42:15.667 Dec 14: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1

  * 15:42:15.667 Dec 14: AC setting hop first MAC: 0017.c575.a23c

  * 15:42:15.855 Dec 14: % CAPWAP-5-JOINEDCONTROLLER: AP joined controller wificontroller

  * 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file

  * 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file

  * 15:42:15.911 Dec 14: LWAPP-4-CLIENTEVENTLOG %: map No. LS Flex to load ACL configuration file. To connect to the controller to get the configuration file

  * 15:42:15.915 Dec 14: LWAPP-4-CLIENTEVENTLOG %: no central Dhcp configuration file map to load. To connect to the controller to get the configuration file

  * 15:42:15.915 Dec 14: % LWAPP-3-CLIENTERRORLOG: connected mode

  * 15:42:23.639 Dec 14: FEDS-6-ACTIVATED %: Signature of IDS is loaded and enabled

  * 15:42:34.615 Dec 14: CLEANAIR-6-State: Slot 0 disabled

  * 15:42:34.615 Dec 14: CLEANAIR-6-State: Slot 1 disabled

  * 15:45:43.783 Dec 14: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST

  (. 11).

  * 15:45:43.787 Dec 14: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode

  * 15:45:43.787 Dec 14: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION

  * 15:45:43.787 Dec 14: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.250.32.8:5246

  * 15:45:43.867 Dec 14: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.

  * 15:45:53.867 Dec 14: % 3-CAPWAP-ERRORLOG: MWAR selected ' wificontroller'(index 0).

  * 15:45:53.867 Dec 14: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 15:45:44.000 Dec 14: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246

  * 15:45:46.315 Dec 14: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.250.32.8 peer_port: 5246

  * 15:45:46.315 Dec 14: % CAPWAP-5-SENDJOIN: send request to join 10.250.32.8

  * 15:45:46.487 Dec 14: "Promiscuous" from Ethernet mode

  * 15:45:49.903 Dec 14: LWAPP-4-CLIENTEVENTLOG %: OfficeExtend Localssid recorded Flash AP

  * 15:45:50.031 Dec 14: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1

  * 15:45:50.031 Dec 14: AC setting hop first MAC: 0017.c575.a23c

  Here are the results of the client debugging capwap event about to access:

  WT-4thFlr-AP3 #debug capwap customer event

  Display debugging EVENT customer CAPWAP is on

  WT-4thFlr-AP3 #.

  * 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.

  * 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

  * 15:54:58.335 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request

  * 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

  * 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

  * 15:54:58.343 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8

  * 15:55:08.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:55:08 UTC 14 December 2013

  * 15:55:25.579 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

  * 15:55:25.587 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

  * 15:55:25.587 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

  * 15:55:25.587 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

  * 15:55:25.827 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

  * 15:55:25.835 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

  * 15:55:25.835 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

  * 15:55:25.835 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

  * 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.

  * 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

  * 15:55:55.835 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request

  * 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

  * 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

  * 15:55:55.843 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8

  * 15:55:56.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:55:56 UTC 14 December 2013

  * 15:56:25.735 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

  * 15:56:25.743 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

  * 15:56:25.743 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

  * 15:56:25.743 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

  * 15:56:25.983 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

  * 15:56:25.991 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

  * 15:56:25.991 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

  * 15:56:25.991 Dec 14: % CAPWAP-3-Journal of EVENTS: event Wtp 10.250.32.8 response

  * 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: Echo interval has expired.

  * 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: sending package to AC

  * 15:56:55.991 Dec 14: % 3-CAPWAP-EVENTLOG: echo sent to 10.250.32.8 request

  * 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: reset reTransmissionCnt to 0

  * 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: queue empty.

  * 15:56:55.999 Dec 14: % 3-CAPWAP-EVENTLOG: echo response from 10.250.32.8

  * 15:56:56.000 Dec 14: % 3-CAPWAP-EVENTLOG: setting the time at 15:56:56 UTC 14 December 2013

  Here are the results of debug capwap client package in detail:

  WT-4thFlr-AP3 #.

  * 14 Dec 15:59:01.823: <   start="" of="" capwap="" packet ="">>

  * 15:59:01.823 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

  * 15:59:01.823 Dec 14: Type Msg: CAPWAP_ECHO_REQUEST

  * 15:59:01.823 Dec 14: Msg length: 0

  * 15:59:01.823 Dec 14: Msg SeqNum: 44

  * 14 Dec 15:59:01.823: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:01.831: <   start="" of="" capwap="" packet ="">>

  * 15:59:01.831 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 15:59:01.831 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 15:59:01.831 Dec 14: Type Msg: CAPWAP_ECHO_RESPONSE

  * 15:59:01.831 Dec 14: Msg length: 15

  * 15:59:01.831 Dec 14: Msg SeqNum: 44

  * 15:59:01.831 Dec 14:

  * 15:59:01.831 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 11

  * 15:59:01.831 Dec 14: the vendor identifier: 0 x 00409600

  * 15:59:01.831 Dec 14:

  * 15:59:01.831 Dec 14:

  IE: UNKNOWN IT IS ABOUT 151

  * 15:59:01.831 Dec 14: IE length: 5

  * 15:59:01.831 Dec 14: decode the routine unavailable, Hex Dump printing

  * 15:59:01.831 Dec 14:

  52 80 46 00 AC

  * 14 Dec 15:59:01.831: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:20.931: <   start="" of="" capwap="" packet ="">>

  * 15:59:20.931 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 15:59:20.931 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 15:59:20.931 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST

  * 15:59:20.931 Dec 14: Msg length: 93

  * 15:59:20.931 Dec 14: Msg SeqNum: 38

  * 15:59:20.931 Dec 14:

  * 15:59:20.931 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 89

  * 15:59:20.931 Dec 14: the vendor identifier: 0 x 00409600

  * 15:59:20.931 Dec 14:

  * 15:59:20.931 Dec 14:

  IE: RRM_NEIGHBOR_CTRL_PAYLOAD

  * 15:59:20.931 Dec 14: IE length: 83

  * 15:59:20.931 Dec 14: decode the routine unavailable, Hex Dump printing

  * 15:59:20.931 Dec 14:

  00 0 HAS FA 20 08 01 00 07 0A 20 08 03 00 01 FA F4

  01 00 00 3 B4 2ND 2ND 06 94 51 79 25 C7 B2 B4 E7

  22 FD BE F6 04 00 00 00 00 00 00 00 00 50 52 4F

  53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00

  00 00 00 00 00 00 00 00 00 00 00 00 00 01 06 0B

  01 01 01

  * 14 Dec 15:59:20.931: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:20.931: <   start="" of="" capwap="" packet ="">>

  * 15:59:20.931 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

  * 15:59:20.931 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE

  * 15:59:20.931 Dec 14: Msg length: 8

  * 15:59:20.931 Dec 14: Msg SeqNum: 38

  * 15:59:20.931 Dec 14:

  * 15:59:20.931 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4

  * 15:59:20.931 Dec 14: result of Code: CAPWAP_SUCCESS

  * 14 Dec 15:59:20.931: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:21.139: <   start="" of="" capwap="" packet ="">>

  * 15:59:21.139 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 15:59:21.139 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 15:59:21.139 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST

  * 15:59:21.139 Dec 14: Msg length: 111

  * 15:59:21.139 Dec 14: Msg SeqNum: 39

  * 15:59:21.139 Dec 14:

  * 15:59:21.139 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 107

  * 15:59:21.139 Dec 14: the vendor identifier: 0 x 00409600

  * 15:59:21.139 Dec 14:

  * 15:59:21.139 Dec 14:

  IE: RRM_NEIGHBOR_CTRL_PAYLOAD

  * 15:59:21.139 Dec 14: IE length: 101

  * 15:59:21.139 Dec 14: decode the routine unavailable, Hex Dump printing

  * 15:59:21.143 Dec 14:

  01 0 TO FA 20 08 01 F4 00 07 0A 20 08 00 01 0C FA

  01 00 00 3 B4 2ND 2ND 06 94 51 79 25 C7 B2 B4 E7

  22 FD BE F6 04 00 00 00 00 00 00 00 00 50 52 4F

  53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00

  00 00 00 00 00 00 00 00 00 00 00 00 00 24 28 2

  30 34 38 3 40 95 99 9 01 01 01 01 01 01 01 A1

  01 01 01 01 01

  * 14 Dec 15:59:21.143: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:21.143: <   start="" of="" capwap="" packet ="">>

  * 15:59:21.143 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

  * 15:59:21.143 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE

  * 15:59:21.143 Dec 14: Msg length: 8

  * 15:59:21.143 Dec 14: Msg SeqNum: 39

  * 15:59:21.143 Dec 14:

  * 15:59:21.143 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4

  * 15:59:21.143 Dec 14: result of Code: CAPWAP_SUCCESS

  * 14 Dec 15:59:21.143: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:25.547: <   start="" of="" capwap="" packet ="">>

  * 15:59:25.547 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

  * 15:59:25.547 Dec 14: Type Msg: CAPWAP_WTP_EVENT_REQUEST

  * 15:59:25.547 Dec 14: Msg length: 14

  * 15:59:25.547 Dec 14: Msg SeqNum: 45

  * 15:59:25.547 Dec 14:

  * 15:59:25.547 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

  * 15:59:25.547 Dec 14: the vendor identifier: 0 x 00409600

  * 15:59:25.547 Dec 14:

  * 15:59:25.547 Dec 14:

  IE: RRM_LOAD_DATA_PAYLOAD

  * 15:59:25.547 Dec 14: IE length: 4

  * 14 Dec 15:59:25.547: slot ccaLoad 0 rxLoad 0 txLoad 0 33

  * 14 Dec 15:59:25.547: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:25.555: <   start="" of="" capwap="" packet ="">>

  * 15:59:25.555 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 15:59:25.555 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 15:59:25.555 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE

  * 15:59:25.555 Dec 14: Msg length: 0

  * 15:59:25.555 Dec 14: Msg SeqNum: 45

  * 14 Dec 15:59:25.555: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:25.795: <   start="" of="" capwap="" packet ="">>

  * 15:59:25.795 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

  * 15:59:25.795 Dec 14: Type Msg: CAPWAP_WTP_EVENT_REQUEST

  * 15:59:25.795 Dec 14: Msg length: 14

  * 15:59:25.795 Dec 14: Msg SeqNum: 46

  * 15:59:25.795 Dec 14:

  * 15:59:25.795 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

  * 15:59:25.795 Dec 14: the vendor identifier: 0 x 00409600

  * 15:59:25.795 Dec 14:

  * 15:59:25.795 Dec 14:

  IE: RRM_LOAD_DATA_PAYLOAD

  * 15:59:25.795 Dec 14: IE length: 4

  * 14 Dec 15:59:25.795: slot ccaLoad 1 rxLoad 0 txLoad 0 0

  * 14 Dec 15:59:25.795: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:25.803: <   start="" of="" capwap="" packet ="">>

  * 15:59:25.803 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 15:59:25.803 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 15:59:25.803 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE

  * 15:59:25.803 Dec 14: Msg length: 0

  * 15:59:25.803 Dec 14: Msg SeqNum: 46

  * 14 Dec 15:59:25.803: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:30.375: <   start="" of="" capwap="" packet ="">>

  * 15:59:30.375 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 15:59:30.375 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 15:59:30.375 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_REQUEST

  * 15:59:30.375 Dec 14: Msg length: 17

  * 15:59:30.375 Dec 14: Msg SeqNum: 40

  * 15:59:30.375 Dec 14:

  * 15:59:30.375 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 13

  * 15:59:30.375 Dec 14: the vendor identifier: 0 x 00409600

  SlotId: 0

  Mobile Mac Addr: BC:52:B7:E3:17:CB

  * 14 Dec 15:59:30.375: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:30.375: <   start="" of="" capwap="" packet ="">>

  * 15:59:30.375 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

  * 15:59:30.375 Dec 14: Type Msg: CAPWAP_CONFIGURATION_UPDATE_RESPONSE

  * 15:59:30.379 Dec 14: Msg length: 8

  * 15:59:30.379 Dec 14: Msg SeqNum: 40

  * 15:59:30.379 Dec 14:

  * 15:59:30.379 Dec 14: Type: CAPWAP_MSGELE_RESULT_CODE, length 4

  * 15:59:30.379 Dec 14: result of Code: CAPWAP_SUCCESS

  * 14 Dec 15:59:30.379: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 15:59:30.387: <   start="" of="" capwap="" packet ="">>

  * 15:59:30.387 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 15:59:30.387 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 15:59:30.387 Dec 14: Type Msg: CAPWAP_WTP_EVENT_RESPONSE

  * 15:59:30.387 Dec 14: Msg length: 0

  * 15:59:30.387 Dec 14: Msg SeqNum: 47

  * 14 Dec 15:59:30.387: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 16:00:00.387: <   start="" of="" capwap="" packet ="">>

  * 16:00:00.387 Dec 14: control of CAPWAP mesg sent to 10.250.32.8, Port 5246

  * 16:00:00.387 Dec 14: Type Msg: CAPWAP_ECHO_REQUEST

  * 16:00:00.387 Dec 14: Msg length: 0

  * 16:00:00.387 Dec 14: Msg SeqNum: 48

  * 14 Dec 16:00:00.387: <  end="" of="" capwap="" packet ="">>

  * 14 Dec 16:00:00.395: <   start="" of="" capwap="" packet ="">>

  * 16:00:00.395 Dec 14: mesg 10.250.32.8 Recd, Port 5246 CAPWAP control

  * 16:00:00.395 Dec 14: HLEN 2, Radio ID 0, WBID 1

  * 16:00:00.395 Dec 14: Type Msg: CAPWAP_ECHO_RESPONSE

  * 16:00:00.395 Dec 14: Msg length: 15

  * 16:00:00.395 Dec 14: Msg SeqNum: 48

  * 16:00:00.395 Dec 14:

  * 16:00:00.395 Dec 14: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 11

  * 16:00:00.395 Dec 14: the vendor identifier: 0 x 00409600

  * 16:00:00.395 Dec 14:

  * 16:00:00.395 Dec 14:

  IE: UNKNOWN IT IS ABOUT 151

  * 16:00:00.395 Dec 14: IE length: 5

  * 16:00:00.395 Dec 14: decode the routine unavailable, Hex Dump printing

  * 16:00:00.395 Dec 14:

  52 80 81 00 AC

  * 14 Dec 16:00:00.395: <  end="" of="" capwap="" packet ="">>

  Try reducing the mtu on ap 2600.

• integrated macOS Sierra Cisco IPsec VPN does not work anymore (impossible to validate the server certificate)

  Hello

  I just upgraded to macOS Sierra and built-in Cisco IPsec VPN no longer works. When you try to connect, I get a "cannot validate the certificate of the server. "Check your settings and try to reconnect" error message. I use Cisco ASA with self-signed certificates and everything worked fine with previous versions of OS X.

  Please help me, I need my VPN Thx a lot

  I am having the same problem with StrongSwan and help cert signed with the channel to complete certificates included in the pkcs12 file imported to the keychain. It was working properly in El Capitan, but now broken in the Sierra.

• Cisco VPN does not work in the Sierra

  I just upgraded to OS Sierra and the Cisco VPN, I had the installer does connect more.  The Setup looks right into network preferences. When I click it looks like it is trying but stops without asking for a password.

  Cisco VPN client may need to update or re-installed. If she uses the PPTP Protocol, it will not work. Support for PPTP was ignored, because it is no longer considered as secure.

• Cisco Jabber

  Good afternoon; I have the Cisco Jabber Software running on an Iphone 6 Plus, everything works well when the phone is unlock, when the phone is locked can not answer the calls received by the Cisco Jabber only a window appears with a message that I have a call, but I can't answer. Is there a way to solve this problem. ????

  Greetings.

  Fernando

  Since this request is not an Apple application, I suggest make you contact with the developer of application or their support and ask your question.

• Windows does not work after resizing partition in OS x disk utilities

  Hello

  I tried to reduce the size of the OSX partition in order to increase the size of partition of Windows 7 and have been unable to start windows since. Bootcamp is grayed out in disk as disk0s3 utilities and I a unable to mount under OSX Bootcamp.

  I tried to use sudo fdisk EI/dev/disk0 tutorial that I saw here as well, and allowed me to see Windows as an option when I start up the computer and hold the button ALT.  However, I get the error "Missing Operating System".

  After that I tried to run repair to the system (including using diskpart to select the partition) but no luck with that. I really don't want to restore the Windows partition and lose files, so nobody knows what can I do to save my files and get windows to start?

  Please after the release of the following OS X Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s3 account = 1 2 >/dev/null | hexdump - C

  Orders 'sudo' will ask you your password, that are not displayed to you.

  What is the year/model is your Mac?

  What version of Windows?

• Run the utilities from disk on machine with Yosemite Snow Leopard startup disk?

  I have a 2009 imac that came with Snow Leopard. I've since updated my OS to Yosemite. Should I run the disc from my old snow leopard startup disk utilities or is it a bad idea?

  It is not a 'bad' idea, but it is always best to use the version of disk utility which is part of the OS version installed. Do this by starting the computer from the Recovery HD.

  Fix the hard disk and permissions

  HD recovery start

  Restart the computer and after the chime hold the Order et R keys until the Menu of the utility is displayed.

  Repair

  When the Utility Menu appears, select disk utility and click on the continue button. Disk utility charges and select layouts withdrawal (usually Macintosh HD) entry of the list to one side.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait for the process to finish, and then quit disk utility and re-enter the Utility Menu. Select restart from the Apple menu.

• If I can do an Airport Extreme mobile network with a modem/router cable xfinity manufactured by Cisco?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?  The modem-router Cisco/Xfinity put into bridge mode?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?

  Yes, if the Airport Extreme will be connected to the Cisco DPC3939 back using wired Ethernet wired, permanent.

  The modem-router Cisco/Xfinity put into bridge mode?

  No. I you have done this, the Cisco/Xfinity device would only act as a simple modem... so it would not be a wireless service to all.

  A note of caution here... the support document you are referencing... Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)... use the examples that are long outdated does not follow with the versions present on a Mac AirPort Utility or iPhone/iPad.

  There are some good general information in the document.

• 41.0.1 - tab utilities Plugin Options does not work - ranks multiple tabs, etc.

  41.0.1, tab utilities Plugin Options does not work, multiple rows of tabs, etc.

  Installed and configured 'Tab Mix Plus' to use instead of "Tab Utilities".

  Solved. Thank you.

• What is the future of the RHEL6 for firefox?

  I was curious, so I downloaded firefox 44 from the server every night. It does not work on RHEL6. Which made me wonder how long firefox will continue to be available to RHEL6. I searched, but I can't find a future roadmap OS compatibility. Surely one exists, somewhere.

  How long firefox will support RHEL6?

  I can not answer, but I noticed that the system requirements for Linux usually is expressed by specific versions of libraries and packages.

  So for Firefox 41:

  • Firefox won't work at all without the following libraries or packages:

         GTK+ 2.18 or higher
         GLib 2.22 or higher
         Pango 1.14 or higher
         X.Org 1.0 or higher (1.7 or higher is recommended)
         libstdc++ 4.3 or higher
  

  • For optimal functionality, we recommend that libraries or the following packages:

         NetworkManager 0.7 or higher
         DBus 1.0 or higher
         HAL 0.5.8 or higher
         GNOME 2.16 or higher
  

  For Firefox beta (Firefox future, 42) there is a significant change for the first article:

  • Firefox won't work at all without the following libraries or packages:

         GTK+ 3.4 or higher
         GLib 2.22 or higher
         Pango 1.14 or higher
         X.Org 1.0 or higher (1.7 or higher is recommended)
         libstdc++ 4.3 or higher
  

  • For optimal functionality, we recommend that libraries or the following packages:

         NetworkManager 0.7 or higher
         DBus 1.0 or higher
         HAL 0.5.8 or higher
         GNOME 2.16 or higher
  

  Developer Edition lists the same requirements as the Beta.

  It is without doubt a similar list for every night, but the download pages are organized differently and I do not see.

• Is it possible to download a previous version of firefox that latest update blocks the characteristics I absolutely have to have for my cisco courses?

  I can't get my password box or my java tool correctly load or work on the update for firefox java tool is something that I have to complete my work in my cisco course. So I would like to know if there is a way to download and install an older version of firefox, so I have something I can do my job without having to use a browser that I don't have confidence.

  If you decide to try the version Extended Support Release (ESR) of Firefox, here is how I suggest to install:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.2.0esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx40
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx40
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Install and run?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx40\Plugins
  • \Fx40\browser\plugins

• FireFox 39 Incompatible with all Cisco devices

  With the last update access to all devices Cisco via FireFox is no longer supported. Now, I get the following errors:

  The secure connection failed
  An error occurred during a connection to [IP]. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)
  The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
  Contact the Web site owners to inform them of this problem.

  Is there a way to roll back the version to avoid this or a permanent fix? FireFox is currently the only browser that works very well with Cisco devices, and now it won't work at all.

  What happens if you set these false in two: config:

  Security.SSL3.dhe_rsa_aes_128_sha
  Security.SSL3.dhe_rsa_aes_256_sha

  Are you able to connect with disabled ciphers?

• Is the plugin "OpenH264 video Codec provided by Cisco Systems, Inc." supposed to come with firefox?

  I recently reinstalled Firefox on my computer and now there is a plugin called "OpenH264 video Codec provided by Cisco Systems, Inc.". I've used Firefox for some time and have never seen this. -What is that supposed to be there. It come with the download of Firefox now?

  Hello DuckBilledPlatypus, yes it is a legitimate plugin that was introduced in firefox 33. for some technical experience on this subject, please see: http://andreasgal.com/2014/10/14/openh264-now-in-firefox/

• Missing utilities after installing SSD and restoring from Time Machine

  Today, I installed an SSD on my mid-2012 13 "MBP (Mavericks running) and then ran the restoration of service Time Machine to bring back everything that I used. All right, except that now I have discovered that Time Machine never backup my Utilties like disk utility, same Terminal is missing.

  I have a bootable USB with the Mavericks installation app on it, but now if I run, it's going to destroy everything Time Machine has done to restore (my CC Adobe apps and plugins, for example)? I would upgrade to El Capitan, but I use an old Wacom which does not have the drivers for the last OS X, so I'm stuck for now (do not want to buy a new Wacom immediately).

  Any ideas on how I can get these dos utilities without using the re - install or upgrade process? I watched the old backups TM and they aren't there either.

  You will have to reinstall the operating system to get the dos utilities.

  Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)