Cisco VCS-highway network Dual interface option key required

Similar Questions

• Cisco VCS Expressway / Starter Pack = part number / Option key

  Hello

  I m a bit confused about ordering cisco information. My document: http://www.cisco.com/c/en/us/products/collateral/unified-communications/...

  First what we want to do. Quick and short: LAN-MCU -/- DMZ-VCSE VM -/-

  -set up a new environment VCSE only for remote workers.

  -ensure the video service just over the internet for Jabber and SIP/h.323 conference systems

  -only the MCU as a peripheral local registerd to provide several conferences

  That share and option key is therefore the best choice?

  Our plan:

  VCSE:

  R VMVCS-EXPWY-K9 (comes with the Cisco telepresence video Communication Server(OVA file) Network Interface feature, characteristic of the motorway, gateway functionality, 1800 TURN relay Option, VCS-Dual)

  1. what inscriptions? There are 2500 built-in?
  2 what of interoperability feature for h.323/SIP? CAN´t find in the list options.

  Options:

  LIC-VCSE-50, LIC-VCS-OCS

  Now the thing of Jabber:

  We want to connect on WAN Jabber clients. This is why the VCSE STRATER PACK has the nice feature of 50 video of Jabber Cisco TelePresence licenses with management in there. But if we get that the CTI-VCS-STPAK-K9 instead of the VCSEVM, we have a limitation of 50 records and 10 calls trasversal, right? Only then the VCSE is intresting (culture and systems to support), but we want the Jabber options on it without buying an MSD.

  1 can we install the CTI-VCS-STPAK-K9 key as an option on the VCSEVM and Jabber use 50 records without losing other features of Highway?
  2 or is it possible to install the CTI-VCSE-SPUPG-K9 key as an option to enable Cisco Jabber 100 user on this VCSEVM?

  Or do we buy the CTI-TMS-SW-K9 with LIC-MOVI-25 (the different today: LIC-JAB-MOB-25, LIC-TMS-EP-25)

  Thanks a lot for answering

  One of the first things I would consider on VCS Starter Pack is that it is almost end of sale, first of September 2014, so think of this forward.

  / EOS-EOL-Notice-C51 - 731300.html

  • What these records? There are 2500 built-in?
    • A single VCS will support up to 2500 records out of the box with a valid key.
  • As for the functionality of H323/SIP Interworking?
    • Interoperability is supported out of the box as long as no separate option key not required.
  • Options: LIC-VCSE-50, LIC-VCS-OCS
    • LIC-VCS-OCS is necessary only if you plan to integrate with Microsoft OCS/Lync VCS, otherwise it is not necessary, especially for the video of Jabber.
  • Can we install the CTI-VCS-STPAK-K9 key as an option on the VCSEVM and Jabber use 50 records without losing other features of Highway?
    • The VCS Starter Pack is a separate server from the VCS control and highway.
  • Or is it possible to install the CTI-VCSE-SPUPG-K9 key as an option to enable Cisco Jabber 100 user on this VCSEVM?
    • It is possible to upgrade a VCS Starter Pack for VCS control or a highway, but you will lose the original pack starter call licenses and Jabber video optoins, like they are not transferable.  The licenses or options you have purchases on top of the basic starter pack will however is transferable.
  • Or do we buy the CTI-TMS-SW-K9 with LIC-MOVI-25 (the different today: LIC-JAB-MOB-25, LIC-TMS-EP-25)
    • If you buy the VCS Starter Pack, it will manage the delivery of Jabber video for you.  If you buy a highway of VCS, you can also buy MSD and install Extension of provisioning of TMS is free.  To use TMSPE, you will need provisioning option keys installed in TMS, the difference between the start-up option keys are simply the types of devices you can fund, all kind of do the same thing really, but for the video of Jabber, you want to ICA-MOVI-XX.

• Cisco VCS does not show the user account option

  Hi team,

  We have 7.2 VCS server control, I'm not able to see the option of user account under maintenance-Login accounts. Please advise.

  We don't have find me and TMS provisioing Extension service license, don't you think that's the reason.

  I just started my first deployment of VCS, MCU and TMS and I must add customer movie, cisco Jabber video for Ipad and integrtaion with CUCM. CUCM has some end points of polycom and C40 and C60.

  You precious advice will give me comfort during this deployment.

  Irfan

  BR

  Hello

  It's probably because that VCS runs in TMS PE commissioning mode, in which FindMe is managed by the portal user in TMS, meaning there is no need to set up the maintenance > logins on the VCS.

  Edit: You added information that you do not have the keys option Device Provisioning and FindMe. Because user names relate directly to FindMe, the absence of an option key FindMe would explain also unable to see maintenance > login accounts > user accounts.

  -Andreas

• Cisco VCS Lync Interworking with Lync Server/multiple domains

  Unfortunately I don't find any reference in the guides of deploymend, if it is possible to master several server/domains on a single VCSE lync. Is there a way to gather environments different lync with a vcs? For example, interoperability with clients a and b, which have completely separated from lync environments.

  We wanted to master it with VCSE, or is the Microsoft key option only avalible for VCS?

  Thanks for the reply.

  The Deployment Guide says you should use a VCS-control, not a VCS-Highway to serve as gateway of Lync.

  I don't think I have several B2BUAs connect to Lync on a single VCS - you would need to have a separate VCS for each Lync environment (IE, one for the customer) and another for client B and search rules appropriate to direct traffic areas in the right direction.

• New EX90s just don't not with DD/PR option keys?

  We had a few customers buy new EX90s and when we hung, they did not have the dual display or resolution premium option keys applied (and they do not appear on either cisco.com/go/license) while previously, Cisco has been including these keys in free.

  Know someone if Cisco have ceased to offer these keys for free, or there was an error somewhere?

  Hi Nick!

  How are you?

  Do not see that they stopped that.

  At least for me the LIC-EX90-PR and LIC-EX90-DD are sure $0 options on an order, but they have to be selected manually.

  Perhaps the one who placed the order I forgot to select?

  screen_shot_2015-07 - 23_at_02.58.03.png

  

  Not 100% sure how the process is to order later, if in doubt, ask your inner CiscoCW

  expert or your Cisco CAM.

  Greetings

  Please note the messages with the stars below and define the thread if it's an answer!

• Route orders for Cisco VCS

  Hello

  We have deployed a VCS Expressway Starterpack with dual NIC

  We followed the deployment guide on how to deploy dual NIC and works very well.

  We find difficult on the way to show the roads that have been set up and also how to remove roads on the VCS.

  What are the specific commands for these?

  Thank you for your support in advance.

  Best regards

  Acevirgil Ocampo

  I checked and did not configure find a way to see what roads are currently, only the ability to add or delete, unless it is under a different command or user interface somewhere.

  xCommand RouteAdd

  «Add and configure a new IP route (also known as a static route).»
  Address (r): 'specifies an IP address that is used in conjunction with the prefix length to determine the network to which applies this road."
  PrefixLength (r): <1..128>'specifies the number of bits of the IP address that must match when determining the network for this route. Default: 32 "
  Gateway (r): 'specifies the IP address of the gateway for this route."
  Interface: "specifies the LAN interface to use for this route. Auto: VCS will select the interface most appropriate to use. "Default: Auto".

  xCommand RouteDelete

  "Deletes a route."
  RouteId (r): <1..50>"The index of the route to delete."

• Restricting calls between a subarea and specific extensions on Cisco VCS

  Hello, I use Cisco VCS 8.5.3, my goal is to restrict calls between a subarea and specific extensions.
  I tried following solutions:

  1. Download of XML strategy
  2. Use of political appeal web interface in order to limit calls

  XML file:

  
   
   

  
   
     
     

  
     
     

  
     
     

  
       
     

  
     
   

  
  
  

  But when I apply the XML file, or try using the web simple rule (for example: 11111 12222 destination source, dismiss the action) I'm still able to place the call to 11111 to 12222.

  What can be the cause of the problem and what else can I try to be able to prohibit calls between a particular Subzone and exentions?

  Attached, is an example of CPL script that should work.  Using this script, CPL, I was able to block calls to a subarea set to a destination alias located in the subzone of default and was always able to call any other end point in the default subfield without problem.  Note that you must enter the name of the subarea, as you have configured on the VCS, including spaces if they exist.

  The scenario is based on the example of CPL "limiting access to a local gateway" X8.5 VCS Administrator's Guide on pg 413, other documents of CPL reference and examples can be seen starting on pg 410.

• Cisco VCS and MCU - Conference does not

  Dear community members

  I have problems in the VCS configuration to work with the MCU to join to several endpoints in a conference. The components that I use:

  -Cisco VCS control v8.7.

  -Cisco 5300 MCU 5310 v 4.5 (1.72)

  -3 x SX20 end points

  I recorded every endpoint and MCU on VCS, but I'm not able to do a conference call 3-way, the only option is 1 video and 1 audio (I disabled the Multisite option). It seems that VCS does not yet call the MCU in the game.

  Kindly help us with it.

  Can you tell us how you set up the Conference and how you have configured MCU and endpoints?

  From the sounds of it, you call each end point of one of the SX20s, but you must call simply directly in the Conference on the MCU.  If you want to have a conference point to point between two end points and then degenerate into a multipoint conference on the MCU, you must configure Multiway.

  With the help of Multiway with Cisco TelePresence systems

• Cisco aironet 1131AG AP radio interface down

  Hello
  I have a problem with my cisco aironet 1131ag AP radio interface.
  I configured the ssid, authentication and encryptation me have it (the ssid) associated with the radio interface, but the interface of dot11radio still in a State of remission to zero, and if a restart the interface this msg appears "% DOT11-4-NO_SSID: no SSID configured." Not started Dot11Radio0 ' what I need to do?
  Help, please

  Configuration:

  Building configuration...

  Current configuration: 1394 bytes
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  host ap name
  !
  Select the 5 secret $1$ Mf3YfBFQQS2.6MSWHQOeG0 $URAK
  !
  No aaa new-model
  domain IP Nida.local
  !
  !
  !
  dot11 ssid Nida
  VLAN 1
  open authentication
  authentication wpa key management
  Comments-mode
  WPA - psk ascii 7 01100F175804575D72
  admit-traffic
  !
  !
  diet pre-standard trading online
  !
  !
  username Cisco privilege 15 password 7 123A0C041104
  !
  Bridge IRB
  !
  !
  interface Dot11Radio0
  IP 192.168.1.80 255.255.255.0
  no ip route cache
  !
  algorithms for encryption tkip encryption mode
  !
  encryption vlan 1 tkip encryption mode
  !
  SSID Nida
  !
  root of station-role
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0
  192.168.1.81 IP address 255.255.255.0
  no ip route cache
  automatic duplex
  automatic speed
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface BVI1
  customer_id FastEthernet0 dhcp IP address
  no ip route cache
  !
  IP http server
  no ip http secure server
  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
  1 channel ip bridge
  !
  !
  !
  Line con 0
  line vty 0 4
  local connection
  !
  end

  You must create the dot11radio0.1 and fastethernet0.1 interface

  Must be something like this:

  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  host ap name
  !
  Select the 5 secret $1$ Mf3YfBFQQS2.6MSWHQOeG0 $URAK
  !
  No aaa new-model
  domain IP Nida.local
  !
  !
  !
  dot11 ssid Nida
  VLAN 1
  open authentication
  authentication wpa key management
  Comments-mode
  WPA - psk ascii 7 01100F175804575D72
  admit-traffic
  !
  !
  diet pre-standard trading online
  !
  !
  !
  Bridge IRB
  !
  !
  interface Dot11Radio0
  no ip route cache
  !
  algorithms for encryption tkip encryption mode
  !
  encryption vlan 1 tkip encryption mode
  !
  SSID Nida
  !
  root of station-role

  interface dot11radio0.1
  encapsulation dot1q 1 native
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0
  no ip route cache
  automatic duplex
  automatic speed
   
  interface Fastethernet0.1
  encapsulation dot1q 1 native
  192.168.1.81 IP address 255.255.255.0
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface BVI1
  customer_id FastEthernet0 dhcp IP address
  no ip route cache
  !
  IP http server
  no ip http secure server
  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
  1 channel ip bridge
  !
  !
  !
  Line con 0
  line vty 0 4
  local connection
  !
  end

  PS has also removed the ip address dot11 interface slot and I'm not sure why the role of station is root?

• Dual monitor Option available in C60

  Hello

  I was setting up a C60 Nomenclature for one of my clients. By making a selection in the option of software feature, I was able to get to select Lic for Multisite and Premium resolution, but not dual display.

  Is there is some other partcode to select the dual display option or it is by default when we order C60. Also, in the description of C60 partcode nothing was mentioned for DD Lic.

  Reagards,

  Aastha

  Hello

  Dual license is not required for another series, such as C40, C60 and C90, for example.

  Cisco reference:

  https://supportforums.Cisco.com/docs/doc-36583

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• OpenSSL with 'Cisco VCS Certificate Creation and use - deployment guide. "

  Hi team,

  To prevent users to log on with the VCS Highway, we want to use OpenSSL (version: 1.0.1p 9 julio 2015), but I am facing the following problem:

  1 - I can't implement the command "touch index.txt".

  2 - I can´t implement the command "openssl genrsa-aes256-out private/cakey.pem 4096"; and when I apply these commands I get "OpenSSL is not recognized.

  I did all the steps that says "VCS certificate creation and use Cisco".

  What could be the matter?

  Thanks for your advice.

  Kind regards

  Bill

  Already explained why touch does not, simply create the .txt through windows command file.

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.

• I see two windows 'readers' when I boot with the Option key

  I had to reinstall Windows 10 (with BootCamp).  Now, I see two windows 'readers', when I boot with the Option key button.

  How can I remove a?

  Start two of them in the same installation of Windows?

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

• Crashes at launch, even with the option key key

  It immediately crashes whenever I run the application. This happens even if I hold down the option key. I have the 23.0.1, version which I think is up to date.
  BP-98bc09af-CEEA-4295-B10d-b2fe82130914

  Well, I got it working again. I reinstalled Firefox from a new download. I guess that my copy has been altered.