Route orders for Cisco VCS

Similar Questions

• Restricting calls between a subarea and specific extensions on Cisco VCS

  Hello, I use Cisco VCS 8.5.3, my goal is to restrict calls between a subarea and specific extensions.
  I tried following solutions:

  1. Download of XML strategy
  2. Use of political appeal web interface in order to limit calls

  XML file:

  
   
   

  
   
     
     

  
     
     

  
     
     

  
       
     

  
     
   

  
  
  

  But when I apply the XML file, or try using the web simple rule (for example: 11111 12222 destination source, dismiss the action) I'm still able to place the call to 11111 to 12222.

  What can be the cause of the problem and what else can I try to be able to prohibit calls between a particular Subzone and exentions?

  Attached, is an example of CPL script that should work.  Using this script, CPL, I was able to block calls to a subarea set to a destination alias located in the subzone of default and was always able to call any other end point in the default subfield without problem.  Note that you must enter the name of the subarea, as you have configured on the VCS, including spaces if they exist.

  The scenario is based on the example of CPL "limiting access to a local gateway" X8.5 VCS Administrator's Guide on pg 413, other documents of CPL reference and examples can be seen starting on pg 410.

• Cisco VCS-highway network Dual interface option key required

  Dear expert;

  I'm new on TV Cisco presence.

  We have below BOM ordered by the customer as well as the VCS-Express is device without network double button Option Interface.

  Now they have made the redundant system with VCS-highway in VM and want to use Nating for which we need double Network Interface license key option.

  How we get this.

  Appreicate your valuable response.

  The option key double network is provided with virtual VCS, however, is a separate post for the VCS material, to enable network features dual on your existing hardware VCS, you will need to order LIC-VCS-DI.

• NEMA OUTDOOR FOR CISCO AP 3702

  Hello!

  One of my clients want to settle and NEMA (enclosure) for cisco AP 3702 OUTDOOR, but I can´t find the part number to order it!

  Can someone tell me if there is a reference number? I found http://www.terra-wave.com/cisco-3702e/http :// www.terra-wave.com/cisco-37...

  but obviously not cisco.

  So I guess the question is: cisco cell of this Articles? If yes where can I find part numbers?

  Thanks in advance

  You're right, Cisco does not. In this document, they recommend one of the following providers:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html

  Third-party sources for the envelopes of NEMA type include:

  www.oberonwireless.com

  www.sparcotech.com

  www.Terra-Wave.com

• NAT via LAN-to-LAN configuration between router IOS and Cisco VPN 3000

  Hello

  I have the following document on the creation of a virtual LAN2LAN including NAT private network.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_configuration_example09186a00801ae24c.shtml

  It? s easily do this with the hub. Now, I have to set it up on the IOS router, and for this purpose, I can? t find any information. NAT, I have my private network to a single IP address that must be by tunnel as my local network official.

  Anyone have documentation on this szenario? I can? t is not on the OCC.

  Thanks for the support

  Hello.

  Concentrators are very friendly units (IMHO) to VPN with NAT and VPN.

  You build an acl defined traffic over the vpn (110) based on the nat wouldn't

  You create an acl to set what is NAT had (111) and create a NAT statement accordingly

  Here is an example configuration.

  !

  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  vpnsrock crypto isakmp key! address x.x.x.x

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  !

  10 VPN ipsec-isakmp crypto map

  defined peer x.x.x.x

  game of transformation-ESP-3DES-SHA

  match address 110

  !

  interface Fa0

  NAT outside IP

  VPN crypto card

  !

  !

  interface fa1

  IP nat inside

  !

  IP nat inside source list 111 interface fa0 overload

  IP route 0.0.0.0 0.0.0.0 y.y.y.y

  access-list 110 permit ip fa0 - ip network-remote control-generic generic-mask

  access-list 111 allow local-network ip network-remote control-generic generic-mask

  !

• Part numbers for virtualization VCS

  Dear all,

  Can someone explain what is the difference between the following references:

  R VMVCS-CTRL-K9 - E-Delivery - Virtual VCS Control, incl. FindMe app

  R-VMVCS-EXPWY-K9-E-livraison-virtual VCS Expressway, Netwrk double interface

  and

  R-VMVCS-E-M-K9 - HW migration to E - Delivery Virtual VCS Highway only

  R-VMVCS-C-M-K9 - HW migration to E-Delivery Virtual VCS only controls

  Which to buy if we need to migrate the VCS_Control and VSC_Expressway of the physical device to the virtual?

  Should buy us new option for appliance virtual keys or we can transfer of physical servers?

  Thank you very much

  Nick

  Hello Nick.

  R VMVCS-CTRL-K9 and R-VMVCS-EXPWY-K9
  This is for a new purchase of control of VCS and highway as a virtual machine.

  R-VMVCS-C-M-K9 and R-VMVCS-E-M-K9
  It is for existing control VCS and Express that runs beneath the unit of equipment you want to migrate a virtual machine.  You must buy one for each VCS you want to migrate depending on whether it is a control or a highway.

  When you buy the migration for VCS, keys option will transfer on the virtual VCS.  You will work with Cisco licenses to do this, after the purchase of the migration numbers.

• Vcs Tandberg and Cisco VCS control

  Hello

  I have a client with an old would invest video and new servers.

  Old video servers

  Control system Tandberg video Communication Server - part number = 117500

  Application of Tandberg video Communication Server Expressway - part number = 1163402

  New video servers:

  VCS License Control - Part Number - R-VMVCS-CTRL-K9

  VCS Expressway License - Part Number - R-VMVCS-EXPWY-K9

  According to Cisco x8.2 Clustering:

  -Each peer runs on a hardware platform with equivalent functionality; for example, you cannot cluster one
  peer running on one core 2 average VM with peers running on base 8 large virtual machines

  Means that the physical old VCS cannot be grouped with new virtual VCS.

  Thank you.

  Hi zizou.

  You can include a device VCS with a VCS VM as long as their matches of software and their hardware platforms have equivalent capabilities.

  Device VCS clustered with VCS VM running on core 2 MediumVM = YES

  VCS machine clustered with VCS VM running on 8 cores LargeVM = No.

  "you can even cluster that are running on the standard devices with peers running on core 2 Medium VMs, but you can not group a peer running on a standard unit with peers running on base 8 large virtual machines.

  (p.4)

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs/config_guide/x8-7/Cisco-VCs-cluster-creation-and-maintenance-deployment-guide-x8-7.PDF

• Cisco VCS - C keeps filling in Purge on MSDS systems

  Hello

  I have a very weird question that is quite difficult to explain. We had a few failures of Fan on my Cisco VCS - C and we did a RMA number and received a new one. I installed this VCS in April this year. I start then notice every time we add a new system to their MSDS ID TMS is of the order of 2860. We have only 42 systems at this stage. Then I noticed when I'm in the systems tab Purge TMS keep my new Cisco VCS - C, populating the name of the system and the type of system, this product about 2800 times. Someone else experiencing something similar to this?

  I'll try to purge these systems, the only thing is that this happen, what can I do else do I completely purge my VCS of TMS and readd it?

  TMS system IDs are generated by TMS and increases when you add several systems.  You might be able to change the ID of the SQL database, systems are stored in the dbo.objSystem table, but I do not recommend because the ID of the system could be used elsewhere and you can potentially break TMS and make things worse.

• Specials on large order for photo books

  Hello

  is there a discount when you order a large order for photo books?

  Thank you

  ******

  < email published by host >

  You can not order more books in iPhoto. Do you mean with Photos.app?

• A good day! Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  A good day!

  Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

  It is a support so nobody user forum here can help you. Maybe if you release with Apple itself.

  http://www.Apple.com/contact/

  There are links here to the online store.

• Trying to open iTunes to download music, but iTunes needs to not be a compatible mode in order for me to open iTunes

  Original title: itunes

  Hi I'm new this update from Microsoft. I am trying to open iTunes to download music but the iTunes must not be a compatible mode in order for me to open iTunes, I tried lookin for the mode in the settings but not able to find it. If someone could help me, please do.

  Hello

  ITunes is Apple's software.

  And we know nothing on your computer.

  Read this, and if it does not help, contact Apple.

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows 7»

  https://support.Apple.com/en-AU/HT204275

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

  I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

  1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

  2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

  3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

  4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

  5. close router configuration utility.

  To set up your wireless computers:

  6. open network connections (start > run > ncpa.cpl > OK)

  7. right click on your wireless adapter icon and select Properties.

  8. click on the wireless networks tab

  9. make sure the box at the top next to "use Windows to configure my wireless."

  10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

  11. click on the view wireless networks"" button.

  12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

  13. open a web browser and confirm that you can access the Internet.

• BlackBerry Smartphones AT &amp; T cancelled my order for the PRIV

  AT & T just sent me to say that my order for the PRIV was cancelled "due to an unexpected problem in the system."

  Bad luck.  No telling how long I have to wait before AT & t won't support the PRIV.  This week I'll call Customer Service, but I don't expect the rep to know anything.

  Carol Byrd

  I suggest you go to the AT & T website and go through the process of order, but on page two, bottom left, search for AT & T local who have the device. Then exit the screen, go to the local store and buy.

  That's what I did

• It is recommended to have a vulnerability for Cisco ASA device scan.

  Dear everybody.

  I have a doubt about the analysis of vulnerabilities for Cisco ASA device. Currently we have a vulnerability to network devices include firewalls. But after race for cisco ASA vulnerability scanning, found nothing in the analysis report.

  Is it is recommended to have a Cisco ASA vulnerability scanning and it will defeat the purpose of the firewall?

  I do not understand you ask you can set the ASA to allow an external user, run an analysis on the internal network?

  If so the answer is generally no. The ASA, by default, not allow incoming connections (or attempts of connections) that are not explicitly allowed in a list of inbound access (applied to the external interface). In most cases there should also be (NAT) network address translation rules configured.

  If you had a remote access VPN, you can allow external scanner to connect through that, then they would have the necessary access to analyze internal systems (assuming that allowed VPN access to all internal networks)

• Is there an SSH for Cisco LMS interface?

  Hello

  Is there an SSH for Cisco LMS interface? Now when I try SSHing in I'm just met a guest for ciscoworks scp. I am trying to access so that I can add new devices by using the dcrcli command without having to RDP in the machine that is running on LMS.

  In addition, is accessible for LMS api soap from the outside? I tried to make it work using soapui but ended up which put on hold after that I read somewhere else that the API is not available outside, I thought I'd check here if to see if it's actually true.

  Thank you

  When LMS runs on one machine virtual ('soft machine'), ADE-OS based on Linux is exposed through ssh.

  When LMS is running on a windows server, there is no interface to ssh for the application of the LMS.

  In this case, the command line utilities are more or less accessible via a Windows command prompt that would require the native console or server access to the RDP.

  The different functions available cli are detailed here:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/ciscoworks_lan_management _...

  I've never seen someone try to use LMS via the API if you are in a very small set of users there. LMS being in its sunset, I wouldn't hold much hope for us to open.