CiscoWorks - Check for a certain command

Hello

Is there a way to check the running configuration of a whole bunch of devices for certain order?

Connect on each device and check to say this text... ip http server

Then in results there show me what are those who have and those who don't

Thank you

You can use reference to the RME for this models

Tags: Cisco Security

Similar Questions

  • How to check for directory Department 6.3 Manager privileges

    Hello

    I want to check for the stewardship of directory access privileges that we create other than cn = Directory Manager.

    I see all the managers directory created the managers directory on the page of the common task tab. But I'm not able to check for privileges for directory management.

    I want to know under which instance, these users are present so that I can just cross the DN and search for instructions of access control for them.

    If anyone can help here please.

    Kind regards
    Neeraj.

    In addition to softerra, which is certainly a tool well (but) you will also review some more 'free' LDAP browsers:

    (1) apache Directory Studio [http://directory.apache.org/studio]

    (2) [http://jxplorer.org] JXplorer

    (3) java 'good old' based LDAP Browser Explorer [http://www.novell.com/communities/node/8652/gawors-excellent-ldap-browsereditor-v282]

    (4) the 'good old' command line tool, which will still work: ldapsearch

    ldapsearch-b "cn = dscc '' d '' cn = Directory Manager '' w Pei 3998 cn = dscc AIT

    Note that you need to explicitly question the 'AIC' attribute for a list of defined ACIS

    HTH,
    Marco

  • Maintain a solenoid open for a certain period of time

    Hello

    I have a NI 9472 with a solenoid attached. I developed a simple vi to operate the solenoid valve (normally closed) when a preset pressure (i.e. pressure) is reached, that is, the valve opens when the pressure exceeds the set value and closes when it falls below the set value.  However, what I really want the vi to do is open the tap for a certain period of time (say 1 dry), so that the built-up pressure may be entirely liberated before the tap is closed, so pressure is composed from zero again and the cycle repeats. I have read some threads already, but I haveen can't has found an answer that works for my application. Please check and looking forward for your help!

    Try this... Make sure you put a wait function in your loop, otherwise you use 100% of your CPU

  • Error: "one of the drives should be checked for consistency" to start the computer

    The original title: disk space

    My laptop is an Acer Aspire 5000 running with XP Home Edition. At a hard 100G drive with 2 partitions fat. Recursively shows problem at startup. The message displayed is "one of the drives should be checked for consistency. So when he was checked always check disk space and get stored at 41%. I tried to restore several times, but it is once again no place for a long time.

    Could you help me with this?

    Hi RodrigoGodinez,
     
    Sometimes the disk check always starts check the file system on one or more drives for consistency. If no button is pressed, the disk check is aborted. In fact, it is because a data structure of the disc or file is corrupted which can not be recovered and check disk always runs at Windows startup.
     
    Restart the computer and run the command chkdsk from the recovery console.
     
    To boot into the recovery console, see the following article:
     
    Additional reference on:
     
    For more information about the disk check, see:
     
    Note: While running chkdsk on the drive if bad sectors are found on the hard drive when chkdsk attempts to repair this area so all available data on this risk to be lost.
     
    If the disk check done in start the computer every time, here is an article that could be useful for:

  • Run CHKDSK /F to check for hard drive corruption. STOP: 0x0000007B__Blue screen

    I have a Vista 64 bit OS.  I tried to do a system restore to the last checkpoint to interrupt a Service Pack.  Restore failed (don't remember exact error), now when I try to boot Vista, I get a message saying to run CHKDSK /F to check for hard drive corruption.  STOP: 0X0000007B
    My questions are:
    (1) do I need Vista recovery CD in order to enter the menu advanced at this stage startup options?
    (2) if I decide to upgrade to Windows 7 now, made the stop: 0x0000007B have a problem with that?  or could I fall in Windows 7?
    Vista 64 gave me many problems and I think its time to make him... Thanks in advance... Mark

    Hi Markgod5,

    Thank you for visiting Microsoft Answers.

    It seems that the hard drive is damaged if we get this error message to running chkdsk.

    You can start the computer in safe mode with command prompt and see if you can start.  Then run the chkdsk command.

    To do this follow these steps:

    (a) restart your computer if it is running.

    (b) press F8 after your computer powers initially on.

    (c) once you see the menu Advanced Boot Options, you can stop tapping.

    (d) use the up/down arrow keys to select Safe mode with command prompt.

    (e) in the command prompt window, type the following command and press enter Chkdsk /R and Chkdsk /F

    Using recovery DVDs, you cannot switch mode winRE (Windows Recovery Environment) to run chkdsk. You need DVD full version (Win 7/Vista) or Vista repair disk.

    You probably won't be able to install win 7 because the problem is with the hard drive and chkdsk should be run for the error.

    Hope the helps of information. Please post back and we do know.
    Joel S

  • Windows can't check for updates 80244019 error code.

    I have a problem, the system is vista home basic. Windows can't check for updates 80244019 error code. I have read many of the forms and ran from bugs that I found from microsoft. Further investigation indicates the RPC and DCOM service Launcher are grayed out and cannot be started or stoped.   Registry settings look good for the RPC service.  The DCOM service depends on RPC service.  In the GUI at the same time say they are started but from the comand prompt, I run the command net start and neither one is registered as running.  Any help would be appreciated.

    Thank you

    Hello

    (1) did you make any changes before the show?

    See the link below:

    Method 1: The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    Method 2: Windows Update error 80070422, 80244019, or 8DDD0018

    http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

    Method 3: You can start the online virus scan and check.

    How to remove a computer virus?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-remove-a-computer-virus

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Let us know if that helps.

  • Win7 SP1 "Check for updates" never full

    I had to reinstall a pre - SP1 version of Win7 64 bit since the partition recovery on the laptop of a friend. After getting SP1 and updates associated, I ran "Check for updates" again and had a known, documented problem in the thread at the https://answers.microsoft.com/en-us/windows/forum/windows_7-update/windows-7-sp1-is-not-downloading-the-updates/b80fb3f8-39c0-4f99-9f6f-8e0464488377?tab=question&status=AllReplies#tabs. Specifically, "Check" never full.

    Unfortunately, the solution prescribed in this thread does not work for me. I downloaded and ran the installation program 1st in the list, (KB3153199), but this stand-alone Setup program runs in its own process of "Search for updates on this computer" and, after a full hour and counting, has not yet completed.

    Is there a work around known for the solution I try?  :)

    Have a read of this discussion (if you haven't already done so) who helped a certain number of questions of update - https://answers.microsoft.com/en-us/windows/forum/windows_7-update/windows-7-update-solution/f39a65fa-9d10-42e7-9bc0-7f5096b36d0c

    If all goes well, she can help him.

  • How can I correctly write the syntax format to enable check on in the command prompt

    How can I correctly write the syntax format to enable check on in the command prompt

    How can I correctly write the syntax format to enable check on in the command prompt

    Type

    check /?

    to see the correct syntax (the same as for any other command console).

  • failure of the preliminary checks for Oracle Real Application Cluster 12 C.

    Hi all. Please, help to investigate and resolve. Thank you.

    [grid@orac1 grid] $./runcluvfy.sh stage pre - crsinst - orac1, orac2 n - correction-verbose

    Conducting due diligence to install cluster services

    Audit accessibility of node...

    Check: Accessibility of node of the node 'orac1 '.

    Accessible destination node?

    ------------------------------------  ------------------------

    orac1                                 yes

    orac2                                 yes

    Result: Check accessibility node from node 'orac1 '.

    Verify the equivalence of the user...

    Check: Equivalence for the user "grid."

    Status of node name

    ------------------------------------  ------------------------

    orac2 spent

    orac1 spent

    Result: Use CONTROL passed to user equivalence "grid."

    Verify node connectivity...

    Checking the configuration of the hosts file...

    Status of node name

    ------------------------------------  ------------------------

    orac1 spent

    orac2 spent

    The hosts config file verification successful

    Interface of the node information to "orac1".

    Name address IP subnet gateway Gateway bat HW address MTU

    ------ --------------- --------------- --------------- --------------- ----------------- ------

    eth0 10.154.137.101 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:28:D1:1F 1500

    eth1 10.154.138.101 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:51:E8:B9 1500

    eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:5 B: D7:29 1500

    Interface of the node information to "orac2".

    Name address IP subnet gateway Gateway bat HW address MTU

    ------ --------------- --------------- --------------- --------------- ----------------- ------

    eth0 10.154.137.102 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:7F:C8:70 1500

    eth1 10.154.138.102 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:9 D: 27:D8 1500

    eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:6E:92:43 1500

    Check: Subnet node connectivity "10.154.137.0."

    Source Destination connected?

    ------------------------------  ------------------------------  ----------------

    orac1 [10.154.137.101] orac2 [10.154.137.102] Yes

    Result: Connectivity node passed to subnet "10.154.137.0" with one or more nodes orac1, orac2

    Check: The subnet '10.154.137.0' TCP connectivity

    Source Destination connected?

    ------------------------------  ------------------------------  ----------------

    orac1:10.154.137.101 orac2:10.154.137.102 failed

    ERROR:

    PRVF-7617: node connectivity between "orac1: 10.154.137.101" and "orac2: 10.154.137.102" failed

    Result: Check failed for the '10.154.137.0' subnet TCP connectivity

    Check: Subnet node connectivity "10.154.138.0."

    Source Destination connected?

    ------------------------------  ------------------------------  ----------------

    orac1 [10.154.138.101] orac2 [10.154.138.102] Yes

    Result: Connectivity node passed to subnet "10.154.138.0" with one or more nodes orac1, orac2

    Check: The subnet '10.154.138.0' TCP connectivity

    Source Destination connected?

    ------------------------------  ------------------------------  ----------------

    orac1:10.154.138.101 orac2:10.154.138.102 failed

    ERROR:

    PRVF-7617: node connectivity between "orac1: 10.154.138.101" and "orac2: 10.154.138.102" failed

    Result: Check failed for the '10.154.138.0' subnet TCP connectivity

    Check: Subnet node connectivity "10.0.4.0."

    Source Destination connected?

    ------------------------------  ------------------------------  ----------------

    orac1 [10.0.4.15] orac2 [10.0.4.15] Yes

    Result: Connectivity node passed to subnet "10.0.4.0" with one or more nodes orac1, orac2

    Check: The subnet '10.0.4.0' TCP connectivity

    Source Destination connected?

    ------------------------------  ------------------------------  ----------------

    orac1:10.0.4.15 orac2:10.0.4.15 failed

    ERROR:

    PRVF-7617: node connectivity between "orac1: 10.0.4.15" and "orac2: 10.0.4.15" failed

    Result: Check failed for the '10.0.4.0' subnet TCP connectivity

    Interfaces available on subnet "10.0.4.0" who are likely candidates for VIP are:

    orac1 eth2:10.0.4.15

    orac2 eth2:10.0.4.15

    CAUTION:

    Could not find an appropriate interface for the private interconnection range

    Checking consistency of subnet mask...

    Verification of consistency for the subnet mask for subnet "10.154.137.0."

    Verification of consistency for the subnet mask for subnet "10.154.138.0."

    Verification of consistency for the subnet mask for subnet "10.0.4.0."

    Verification of consistency for the last subnet mask.

    ERROR:

    GLWB-1172: the IP "10.0.4.15" is on more than one interface 'eth2, eth2' nodes 'orac2, orac1 '.

    Result: Check the node has no connectivity

    Checking for multicast communication...

    Verification of the subnet "10.154.137.0" for multicast with "224.0.0.251. multicast group communication

    GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.

    Verification of the subnet "10.154.138.0" for multicast with "224.0.0.251. multicast group communication

    GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.

    Verification of the subnet "10.0.4.0" for multicast with "224.0.0.251. multicast group communication

    GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.

    GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.

    Checking configuration ASMLib.

    Status of node name

    ------------------------------------  ------------------------

    orac1 spent

    orac2 spent

    Result: Check the configuration of ASMLib passed.

    Check: Total memory

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)

    orac1 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)

    Result: The total past memory check

    Check: Available memory

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    transmitted orac2 Go 5,2293 (5483324,0 KB) 50 MB (51200,0 KB)

    transmitted orac1 Go 5,1456 (5395600,0 KB) 50 MB (51200,0 KB)

    Result: Available past memory check

    Check: Swap space

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)

    orac1 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)

    Result: Check the Swap space past

    Check: Disk space for "orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.

    Path node name Mount point available requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    orac2/usr / 37,8398 GB GB 1,0635 spent

    orac2/var / 37,8398 GB GB 1,0635 spent

    orac2/etc / 37,8398 GB GB 1,0635 spent

    orac2/sbin / 37,8398 GB GB 1,0635 spent

    orac2/tmp / 37,8398 GB GB 1,0635 spent

    Result: Free past to check the disk space ' orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.

    Check: Disk space for "orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.

    Path node name Mount point available requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    orac1/usr / 32,4382 GB GB 1,0635 spent

    orac1/var / 32,4382 GB GB 1,0635 spent

    orac1/etc / 32,4382 GB GB 1,0635 spent

    orac1/sbin / 32,4382 GB GB 1,0635 spent

    orac1/tmp / 32,4382 GB GB 1,0635 spent

    Result: Free past to check the disk space ' orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.

    Check: Existence of user for "grid".

    Name of State comment node

    ------------  ------------------------  ------------------------

    orac2 past exists (1100)

    orac1 past exists (1100)

    Check for multiple users with the value of the UID 1100

    Result: Check for multiple users with the value of the UID 1100 spent

    Result: Use existence CONTROL passed to 'grid '.

    Check: Existence of group 'oinstall '.

    Name of State comment node

    ------------  ------------------------  ------------------------

    orac2 passed exists

    orac1 passed exists

    Result: Existence of group check passed for "oinstall".

    Check: Existence of group for "dba".

    Name of State comment node

    ------------  ------------------------  ------------------------

    orac2 passed exists

    orac1 passed exists

    Result: Existence of group check passed for "dba".

    Check: the members of the user 'grid' group 'oinstall' [primary]

    Name of node user is group is user group primary status

    ----------------  ------------  ------------  ------------  ------------  ------------

    orac2 Yes Yes Yes Yes past

    orac1 Yes Yes Yes Yes past

    Result: Membership search for "grid" user in the group 'oinstall' [as Primary] spent

    Check: Membership of the user "grid" in a group 'dba '.

    Name of node user is group are users in a group situation

    ----------------  ------------  ------------  ------------  ----------------

    orac2 Yes Yes Yes past

    orac1 Yes Yes Yes past

    Result: Check for user "grid" in group membership 'dba' spent

    Tick: Run level

    Name of the node run status level required

    ------------  ------------------------  ------------------------  ----------

    orac2         5                         3,5                       passed

    orac1         5                         3,5                       passed

    Result: Run control the level of the past

    Check: Hard limits for "file descriptors open maximum".

    Node name Type requested State available

    ----------------  ------------  ------------  ------------  ----------------

    4096, 65536 failed hard orac2

    4096, 65536 failed hard orac1

    Result: Hard limits check failed for 'file descriptors open maximum.

    Check: Limits Soft for "file descriptors open maximum".

    Node name Type requested State available

    ----------------  ------------  ------------  ------------  ----------------

    1024 1024 soft orac2 spent

    sweet orac1 4096 1024 spent

    Result: Soft limits check passed for "file descriptors open maximum".

    Check: Hard limits for "maximum user processes.

    Node name Type requested State available

    ----------------  ------------  ------------  ------------  ----------------

    46654 16384 hard orac2 spent

    46654 16384 hard orac1 spent

    Result: Verification of limits hard to last for "maximum user process.

    Check: Limits Soft for "maximum user process.

    Node name Type requested State available

    ----------------  ------------  ------------  ------------  ----------------

    orac2 1024-2047 soft failed

    orac1 1024-2047 soft failed

    Result: Limits Soft check failed for 'maximum process of the user.

    Control: System Architecture

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 x86_64 x86_64 spent

    orac1 x86_64 x86_64 spent

    Result: Verification of the system architecture past

    Control: Kernel Version

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2-2.6.32 - 279.el6.x86_64 2.6.32 spent

    orac1-2.6.32 - 279.el6.x86_64 2.6.32 spent

    Result: Last kernel version control

    Check: Parameter of kernel for 'semmsl.

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    orac1 250 250 250 spent

    orac2 250 250 250 spent

    Result: Check of kernel parameter passed to "semmsl.

    Check: Parameter of kernel for 'semmns.

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    32000 32000 32000 orac1 spent

    32000 32000 32000 orac2 spent

    Result: Check kernel parameter passed to "semmns.

    Check: Parameter of kernel for 'semopm.

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    orac1 100 100 100 spent

    orac2 100 100 100 spent

    Result: Check kernel parameter passed to "semopm.

    Check: Parameter of kernel for 'semmni.

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    orac1 128 128 128 spent

    orac2 128 128 128 spent

    Result: Check of kernel parameter passed to "semmni.

    Check: "Package" kernel parameter

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    4398046511104 4398046511104 3067658240 orac1 spent

    4398046511104 4398046511104 3067658240 orac2 spent

    Result: Check of kernel parameter passed to 'package '.

    Check: Parameter of kernel for "shmmni(5)."

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    4096-4096-4096 orac1 spent

    4096-4096-4096 orac2 spent

    Result: Check of kernel parameter passed to 'shmmni(5) '.

    Check: "Shmall" kernel parameter

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    4294967296 4294967296 599152 orac1 spent

    4294967296 4294967296 599152 orac2 spent

    Result: Check kernel parameter passed to "shmall.

    Check: Parameter of kernel "file-max.

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    6815744 6815744 6815744 orac1 spent

    6815744 6815744 6815744 orac2 spent

    Result: Check of kernel parameter passed to 'file-max.

    Check: "Ip_local_port_range" kernel parameter

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    orac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed

    orac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed

    Result: Check of kernel parameter passed to «ip_local_port_range»

    Check: Parameter of kernel for "rmem_default."

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    262144 262144 262144 orac1 spent

    262144 262144 262144 orac2 spent

    Result: Check of kernel parameter passed to 'rmem_default '.

    Check: "Rmem_max" kernel parameter

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    4194304 4194304 4194304 orac1 spent

    4194304 4194304 4194304 orac2 spent

    Result: Check of kernel parameter passed to «rmem_max»

    Check: Parameter of kernel for "wmem_default."

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    262144 262144 262144 orac1 spent

    262144 262144 262144 orac2 spent

    Result: Check of kernel parameter passed to 'wmem_default '.

    Check: "Wmem_max" kernel parameter

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    1048576 1048576 1048576 orac1 spent

    1048576 1048576 1048576 orac2 spent

    Result: Check kernel parameter passed to "wmem_max.

    Check: Parameter of kernel for "aio-max-nr.

    Current name configured node comment of the requested State

    ----------------  ------------  ------------  ------------  ------------  ------------

    1048576 1048576 1048576 orac1 spent

    1048576 1048576 1048576 orac2 spent

    Result: Check of kernel parameter passed to "aio-max-nr.

    Check: Existence of package for "binutils".

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    binutils - 2.20.51.0.2 - 5.34.el6 orac2 binutils - 2.20.51.0.2 spent

    binutils - 2.20.51.0.2 - 5.34.el6 orac1 binutils - 2.20.51.0.2 spent

    Result: Package of checking for "binutils".

    Check: Existence of package for "compat-libcap1.

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent

    orac1 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent

    Result: Package of checking for "compat-libcap1.

    Control: Existence of package for "compat-libstdc ++-33 (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent

    orac1 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent

    Result: Package of checking for "compat-libstdc ++-33 (x86_64).

    Control: Existence of package for 'libgcc (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent

    orac1 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent

    Result: Package of checking for 'libgcc (x86_64).

    Control: Existence of package for 'libstdc ++ (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent

    orac1 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent

    Result: Package of checking for 'libstdc ++ (x86_64).

    Control: Existence of package for 'libstdc ++ - devel (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent

    orac1 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent

    Result: Package of checking for 'libstdc ++ - devel (x86_64).

    Check: Existence of package for "sysstat".

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac2

    sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac1

    Result: Package of checking for "sysstat".

    Check: Existence of package for 'gcc '.

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    4.4.7 - gcc - 11.el6 orac2 gcc - 4.4.4 spent

    4.4.7 - gcc - 11.el6 orac1 gcc - 4.4.4 spent

    Result: Package of checking for "gcc".

    Check: Package of existence 'gcc - c++.

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent

    orac1 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent

    Result: Package of checking for "gcc - c++.

    Check: Existence of package for 'ksh '.

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    ksh-20120801 - 21.el6.1 orac2 spent ksh...

    ksh-20120801 - 21.el6.1 orac1 spent ksh...

    Result: Package of checking for "ksh".

    Check: Existence of package to 'make it '.

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    make orac2 make - 3.81 - 20.el6 - 3.81 spent

    make orac1 make - 3.81 - 20.el6 - 3.81 spent

    Result: Package of verification of existence moved to 'make it '.

    Control: Existence of package for 'glibc (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent

    orac1 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent

    Result: Package of checking for "glibc (x86_64).

    Control: Existence of package for 'glibc-devel (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent

    orac1 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent

    Result: Package of checking for "glibc-devel (x86_64).

    Control: Existence of package for "libaio (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent

    orac1 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent

    Result: Package of checking for "libaio (x86_64).

    Control: Existence of package for "libaio-devel (x86_64).

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent

    orac1 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent

    Result: Package of checking for "libaio-devel (x86_64).

    Check: Existence of package for 'nfs-utils '.

    Requested State available node name

    ------------  ------------------------  ------------------------  ----------

    orac2 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past

    orac1 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past

    Result: Package of checking for 'nfs-utils '.

    Check the availability of the "6200,6100" ports required for the component 'Oracle Notification Service (ONS)'

    Name of the node Port number protocol status available

    ----------------  ------------  ------------  ------------  ----------------

    orac2 6200 TCP successful Yes

    orac1 6200 TCP successful Yes

    orac2 6100 TCP successful Yes

    orac1 6100 TCP successful Yes

    Result: Availability of Port Control passed to ports '6200,6100 '.

    Check for multiple users with the value of the UID 0

    Result: Check for multiple users with the value of the UID 0 past

    Check: The current group ID

    Result: Control of current past group ID

    Check the consistency of the main group of the root user from

    Status of node name

    ------------------------------------  ------------------------

    orac2 spent

    orac1 spent

    Check the consistency of the primary group of the user root past

    Starting synchronization check by using the Network Time Protocol (NTP)...

    Of NTP Configuration file check has started...

    The NTP configuration file "/ etc/ntp.conf" is available on all nodes

    Of NTP Configuration file check passed

    Checking delay of the devil...

    Check: Time for 'ntpd '.

    Node name race?

    ------------------------------------  ------------------------

    orac2                                 yes

    orac1                                 yes

    Result: Check time-out for 'ntpd '.

    Check for NTP daemon or service life spent on all nodes

    Check if NTP daemon or service using the 123 UDP port on all nodes

    Search the NTP daemon or service uses the port UDP 123

    Name of the node Port open?

    ------------------------------------  ------------------------

    orac2                                 yes

    orac1                                 yes

    Common NTP Time Server checks began...

    Time server NTP "193.27.209.1" is common to all nodes on which runs the NTP daemon

    Time server NTP "194.29.130.252" is common to all nodes on which runs the NTP daemon

    Registration of time server common NTP spent

    The clock offset record time server NTP began...

    Audit on the nodes '[orac2, orac1] "...

    Check: The Offset of the time clock to the time server NTP

    Time server: 193.27.209.1

    Time limit offset: 1000,0 ms

    Name of node time shift status

    ------------  ------------------------  ------------------------

    orac2 - 355.25 spent

    orac1 - 124.19 spent

    Time server "193.27.209.1" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].

    Time server: 194.29.130.252

    Time limit offset: 1000,0 ms

    Name of node time shift status

    ------------  ------------------------  ------------------------

    orac2 - 358.87 spent

    orac1 - 109.63 spent

    Time server "194.29.130.252" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].

    The clock offset check past

    Result: Control of synchronization using Network Time Protocol (NTP) spent

    Base file name consistency check model...

    Check the consistency of spent Core file name pattern.

    Check to make sure that the user "grid" is not in the group "root".

    Name of State comment node

    ------------  ------------------------  ------------------------

    There is no such thing as orac2 spent

    There is no such thing as orac1 spent

    Result: User "grid" is not part of the "root" group Check the past

    Audit default user file creation mask

    Name of node available comment required

    ------------  ------------------------  ------------------------  ----------

    0022-0022 orac2 spent

    0022-0022 orac1 spent

    Result: Mask by default user file creation passed Verification

    Checking the integrity of the file "/ /etc/resolv.conf ' overall of nodes

    Check the file "/ /etc/resolv.conf" to ensure that the only area and search for entries is defined

    CAUTION:

    PRVF-5640: both search and domain entries are present in the file ' / /etc/resolv.conf ' on the following nodes: orac1, orac2

    Checking if entry field in the file ' / /etc/resolv.conf ' is constant in knots...

    Check the file "/ /etc/resolv.conf ' to ensure that single domain entry is defined

    There is no more than a 'domain' entry in any ' / /etc/resolv.conf ' file

    All nodes have the same 'domain' entry defined in the file "/ /etc/resolv.conf.

    If control search entry in the file "/ /etc/resolv.conf ' is constant in knots...

    Check the file "/ /etc/resolv.conf ' to ensure that research that one entry is defined

    Several topics 'research' does not exist in any ' / /etc/resolv.conf ' file

    All nodes have the same order of 'search' defined in the file "/ /etc/resolv.conf.

    Checking the time of DNS response for an unreachable node

    Status of node name

    ------------------------------------  ------------------------

    orac1 spent

    orac2 spent

    The time of DNS response for an unreachable node is consistent with the acceptable limit on all nodes

    Check the integrity of the file "/ /etc/resolv.conf ' past

    Check: consistency of zone

    Result: the zone past consistency check

    Verifying the integrity of the name service switch configuration file ' / /etc/nsswitch.conf '...

    Check if "hosts" entry in the file "/ /etc/nsswitch.conf" is consistent in all nodes...

    Check the file "/ /etc/nsswitch.conf" to ensure that the single entry "hosts" is set

    More of an entry "hosts" does not none "/ /etc/nsswitch.conf ' file

    All nodes have even entered 'hosts' defined in the file "/ /etc/nsswitch.conf.

    Check the integrity of the name service switch configuration file ' / /etc/nsswitch.conf ' past

    Control the demon "avahi-daemon" is not configured and running

    Check: Daemon "avahi-daemon' not configured

    Name of the configured node status

    ------------  ------------------------  ------------------------

    orac2 Yes failed

    orac1 Yes failed

    Demon not configured has no process "avahi-daemon."

    Check: Daemon "avahi-daemon" does not

    Node name race?                  Status

    ------------  ------------------------  ------------------------

    orac2 Yes failed

    orac1 Yes failed

    Demon of the control does not have to process "avahi-daemon" works not

    From check for/dev/SHM mounted as a temporary file system...

    Check for/dev/shm mounted as a temporary last file system

    ******************************************************************************************

    Here is a list of pre-requisites fixable chose to fix at this session

    ******************************************************************************************

    --------------                ---------------     ----------------

    Check has failed.                 Failed on nodes of reboot needed?

    --------------                ---------------     ----------------

    Limit: maximum orac2 opened, orac1 not

    file descriptors

    The soft limit: maximum user orac2, orac1 not

    process

    Demon 'avahi-daemon' not orac2, orac1 not

    configured and running

    Run "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" as root user on the nodes 'orac1, orac2' to perform correcting operations manually

    Press the ENTER key to continue after execution of ' / tmp/CVU_12.1.0.1.0_grid/runfixup.sh ' has finished on the nodes 'orac1, orac2 '.

    FIX: Strict limit: file descriptors open maximum

    Status of node name

    ------------------------------------  ------------------------

    orac2 failed

    orac1 failed

    ERROR:

    GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

    GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

    Result: "strict limit: file descriptors open maximum" could be fixed on nodes 'orac2, orac1 '.

    FIX: Soft limit: maximum user process

    Status of node name

    ------------------------------------  ------------------------

    orac2 failed

    orac1 failed

    ERROR:

    GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

    GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

    Result: "soft limit: maximum user process" could be fixed on nodes 'orac2, orac1 '.

    FIX: Daemon "avahi-daemon' not configured and running

    Status of node name

    ------------------------------------  ------------------------

    orac2 failed

    orac1 failed

    ERROR:

    GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.

    GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.

    Result: "Demon"avahi-daemon' not configured and running"could not set on the nodes 'orac2, orac1 '.

    Difficult operations for some prerequisites fixable failed nodes 'orac2, orac1 '.

    Check prior to the installation of cluster service failed on all nodes.

    SOLVED!

    The root cause was in iptables service works.

    Just forgot to arrest him and take off chkconfig!

    Issue can be closed.

  • Delete "Check for Updates" Microsoft Office 2010 - GPO

    I'm working on the packaging of various components of Microsoft Office 2010, such as the shared components, the Office Software Protection Platform Service, Visio (all flavors) and project (Standard and Pro).  I wanted to delete "Check for Updates" in the Help menu.  I installed the Office administrative templates on my machine to capture, added models to gpedit.msc and open administration-> Microsoft Office 2010 templates-> disable UI elements-> "disable the commands on the file tab | Help»  I ran a prescan, then I activated the strategy, checked the box to remove the "Check for Updates" and click OK.

    I open Visio and checked that the 'Check for Updates' button is greyed out.  I closed my Visio and performed a scan of post and saved the project.  I looked in all the files in the registry text.  I pulled the text below in the file HKEY_CURRENT_USER.txt, added to the lower part of the same file in my project of exisitng Visio, run build.bat, cleared out the old sandbox, launched Visio, and the button is grayed.

    My question: this application will encounter problems with Group Policy objects, or the complete isolation on these entries mode settings will be sufficient to keep the setting?

    Here is the text of registry I captured and added (also included in the attached text file):

    isolation_writecopy HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\Toolbars\Settings
    Value = Microsoft Visio
    REG_BINARY=#01#01#00#00#00#00#00#00#02#00#01#00#00#00#02#01#ff#ff#8f#05#00#00#01#00#18#00#00#00#10#00#00#02#02#02#fe#00#00#00#00#c8#00#00#00#23#01#da#00#eb#01#ce#02#02#01#ff#ff#f1#05#00#00#41#01#18#00#00#00#12#00#00#02#00#02#00#00#00#00#00#09#01# 00 00 # 46 # 01 # #ea #00 # #02 #de #02 4f

    isolation_writecopy HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Visio
    Value = MTTF
    REG_DWORD = # 7 a #02 #00 #00
    Value = MTTA
    REG_DWORD = # 7 a #02 #00 #00

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} isolation_full

    isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} \0
    Value = Options
    REG_DWORD = #00 #00 #00 #00
    Value = Version
    REG_DWORD = #03 #00 #03 #00
    Value = DSPath
    REG_SZ ~ LocalGPO #2300
    Value = FileSysPath
    REG_SZ~%SystemSystem%\GroupPolicy\User#2300
    Value = DisplayName
    REG_SZ ~ local #2300 group policy
    Value = Extensions
    REG_SZ~[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}]#2300
    Value = link
    REG_SZ ~ Local #2300
    Value = GPOName
    REG_SZ ~ local #2300 group policy
    Value = GPOLink
    REG_DWORD = #01 #00 #00 #00
    Value = lParam
    REG_DWORD = #00 #00 #00 #00

    isolation_full User\software HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

    isolation_full User\software\policies HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

    isolation_full User\software\policies\microsoft HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

    isolation_full User\software\policies\microsoft\office HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

    isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0

    isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0\visio

    isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0\visio\disabledcmdbaritemscheckboxes
    Value = OfficeAssistant
    REG_SZ ~ 0 #2300
    Value = GetStartedOfficeOnline
    REG_SZ ~ 0 #2300
    Value = ContactMicrosoft
    REG_SZ ~ 0 #2300
    Value = OfficeCenter
    REG_SZ ~ 0 #2300
    Value = ButtonTaskClickToRunStatusUpdates
    REG_SZ ~ 0 #2300
    Value = ProductUpdates
    REG_SZ ~ 18220 #2300

    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} isolation_writecopy
    Value = LastPolicyTime
    REG_DWORD = 8 # c# 50 #ff #00

    isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office

    isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0

    isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\visio

    isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\visio\disabledcmdbaritemscheckboxes
    Value = OfficeAssistant
    REG_SZ ~ 0 #2300
    Value = GetStartedOfficeOnline
    REG_SZ ~ 0 #2300
    Value = ContactMicrosoft
    REG_SZ ~ 0 #2300
    Value = OfficeCenter
    REG_SZ ~ 0 #2300
    Value = ButtonTaskClickToRunStatusUpdates
    REG_SZ ~ 0 #2300
    Value = ProductUpdates
    REG_SZ ~ 18220 #2300

    If specified in your package (in the virtual environment) it will be used. Something virtual will win all the conflicts with local elements (in this case deployed GPO registry keys). If you specify a setting normally applied GPOS in your package there no way to replace it by using Group Policy objects...

  • Could not execute auto Check for DISPLAY

    Aloha!

    I am about to install 11 g R2 on OLE5 and I put the variable display using ' DISPLAY = < computer name >-: 0,0; Export DISPLAY '. When installing ".» / runInstaller "im having this error"Could not execute auto check for display... »

    Can I cancel the mention of the above command?

    Thanks for the help.

    Hades

    Salvation;

    Close your shell to reopen a new

    Respect of
    HELIOS

  • How to check for a button

    I have a form that presents itself. My submission is the standard:
    < input type = "submit" name = value "btnsubmit" = "Send your order" >

    When the form is submitted, I check for btnsubmit by using paramerexists or isDefined:
    < parameterexsits (btnsubmit) cfif >
    perform inserts, etc.
    < / cfif >

    It works very well. But my question is what do I do if the type = instead of submit button? For example
    < input type = "button" name = value "btnSubmit" = "Send your order" >

    I'm little javascrpt of validation that the form is sent when the user clicks the button. However, how to determine if the button was seleceted or not, so I can do my treatment (insert, etc.)? I tried using the isDefined or parameterexists as before, but it does not work?

    What is the command to verify that a button has been selected?

    given that your form is sent with a function js instead of a shipment
    button, the user clicks button on will not be submitted with the form.

    Add a hidden field to your form, say
    name = "subject" id = "subject" value ="" >
    your js validation add a line before calling submit():
    document.getElementById("submitted").value = 1;

    then on your page/form action processing code search

    HTH

    Azadi Saryev
    SABAI - Dee.com
    http://www.SABAI-Dee.com/

  • Thunderbird by failing to check for mail. Must be done manually. RESOLVED by 38.3.0

    About two weeks ago or so, Thunderbird stopped checking for mail. I always got it for 3 minutes and it's always worked so far. So now, I have to manually hit "Get Messages" to receive my mail. Find out how to fix this?

    Thank you!

    JQW

    Please update to version 38.3.0 which came out today.
    Is this better?

  • Thunderbird 38.2.0 does not check for incoming mail, freezing

    I used Thunderbird for years without problem. Update 38.2.0 was so bad for me that I had to uninstall it. Questions:

    (1) would not check for incoming mail
    (2) popped up the windows of information that had no text and even not closing "x" in the corner (although I could click the right superior whiteness and she closed)
    (3) screen would freeze. At least the closing 'x' still - working but it's the only thing that makes.

    Every update I've ever had until this has been perfectly integrated. This one was painful.

    My question is when there's an update to correct these problems?

    Please update to version 38.3.0 which came out today. Will probably solve your problem.

    Is this better?

  • Check for new messages at startup does not work in the first period of 10 minutes after v38 updated. Work at the end of 10 minutes. CAUSE unknown - went away after reinstall

    After the 38.0.1 of 31 thunderbird update does not check for messages at startup, tried on two workstations, mail for a single account on each account, one was pop and other imap. The check box in the accounts-> server settings has no effect. Or not safe mode or the option advanced messages "include this server when getting new messages". "." Activity Manager shows not even he is trying to connect. The question mark function still works well so if I wait 10 minutes he gets messages automatically...

    said rafikiphoto

    I reinstalled the program once more and it works OK but it's already happened and it fails once more.

    The last installation permanently solve this (so far)?

Maybe you are looking for