Similar Questions

• Claire VF but Rec on ext monitor?

  Claire VF but Rec on ext monitor?

  Is there a way?

  I know the Red Rec Stby on top. But the declaration of principles want a clear framework.

  Thank you

  Well, to my knowledge, I think that if you want... you can have just the score on the SDI stream light show, and that would be attached to the camera...

  As said, 3 SDI and the VF mimic each other what's on 3 SDI will appear in the VF... But on the side of the VF, you have the 'Display' button that you should be able to turn off all the information in just the VF.

  So with that in place, you could see a clean image in the VF, with SDI 1 is also clean and SDI 3 being the one with the record count.

  Some monitors have a record tally indicator on the monitor itself and which would be active through the menu on the screen itself, but it is something that is variable according to the monitors. And at that time where the camera needs to send a REC flag to trigger such a capability in the monitor. I believe that there is an option in the "REGISTRATION" menu that will allow SDI relaxation to be active.

  Hope that helps a little...

• Claire ISAKMP and IPSec in PIX Security Association

  Hello

  How do you delete the ISAKMP and IPSec security associations in a PIX? (As you do in the IOS using the commands 'clear' crypto..)

  Thank you------Naman

  The type of config mode:

  Claire ipsec his

  Claire isakmp his

  I hope this helps.

  Cody Rowland

  Infrastructure engineer

• Lost comunication in VPn tunnel after session claire encryption

  Hello!

  EzVPN with DVIT.

  Everything works (it has communication with remote local networks, I can ping) up to this I type:

  Claire crypto his

  After this command, the tunnel is restarted, the tunnel is UP, but the communication does not come back (I can't ping inside).

  on, client and server, I have

  invalid-spi-recovery crypto ISAKMP
  ISAKMP crypto keepalive 10 periodicals

  What is the code for the server EZVPN are you with DVTI? You can go on this bug.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth39861

  Try to reload the zone and see if the tunnel back upwards once and issue the command erase again and see if the IPP disappears.

• Why the extra bar under the search bar was added without a way to remove it? I like to keep a page claire undistracting.

  I would like to be able to remove the bar below the search line in the middle of the page and the stuff recently added at the bottom of the page. An empty clean page. Can be a person the choice to take control of a screen on his computer? I would also like to comment on the addition of the blurb on impossible to load this * AD * stuff because I have a filtered list to eliminate all the other nonsense that are added with updates to adobe flash for ads. Until they can help create the means to stop all ads that I will continue. If you don't allow to remove the bs in the middle of the page, I'll have to rewrite your code to remove it and block all updates. I don't like ads extensively.

  Doug H

  I received this info by private message:

  It's the text of presentation... wherever I blocked ads from loading that it appears in the empty place holder.

  "Unable to connect, firefox could not connect to the server ' blah blah blah @doubleclick.net.

  Sounds as if the announcement was incorporated by using an iframe, which is an entire web page and not just a picture. Your adblocker seems to prevent the entire page to be retrieved if Firefox shows the same kind of message, instead of the page as if you had loaded it in its own tab. Perhaps a different advertising blocker could hide the frame entirely, which would be more aesthetic.

• the download window has an entry that will not - delete current state is paused, but it will not and claire all does not remove it - all just annoying

  Download "Wood_m5.wmv" attempted to http://www.americancraftsmanwin.com/demo5.html

  Delete the downloads.sqlite file in the Firefox profiles folder

  See:

  • http://KB.mozillazine.org/Unable_to_save_or_download_files#Manually_delete_download_history
  • https://support.Mozilla.org/KB/unable+to+download+or+save+files

• Satellite L505-13n delay keyboard - lag in claire win7 installation prob

  Hello.

  I have a laptop Toshiba Satellite L505-13n I buy a week before and I clearly install windows 7 ultimate 64 bit Greek with all drivers 64-bit for this laptop that I find in the toshiba site.

  I have delays major keyboard when I press a letter, this letter, start typing itself many times it stops for 1-2 seconds and continue typing.
  This is the problem because under conditions normal conditions this letter and each letter or text go he must be entered WITHOUT ANY BREAK.

  I check the hard drive, and has no problem.

  I try to run LiveCD:
  1 Ubuntu and other linux editions
  2. Windows xp
  3. Windows vista

  and to clear formatted the hard drive try to install:
  1. Windows 7 64 bit
  2. Windows xp Greek sp3

  The problem remains.

  Please tell me what to do and I can try to solve this MAJOR problem for me.

  THANK YOU FOR YOUR TIME AND YOUR ANSWERS.

  Retest with original Toshiba recovery image. With the settings everything should work well. If this is not the case, there must be a hardware problem.
  You can try with the BIOS update, but in my opinion, it is not best idea.

  Laptop is new and everything should work again.
  Test it with the original recovery image without having to install the updates or other software, just clean recovery image. If the problem persists, contact the nearest Toshiba service provider to check the functionality of the keyboard.

  What else can you do?

• TPM BIOS dialogue request to claire TPM - dialog is not touch sensitive and no response

  When you reset Windows 10 on my 8 Stream, it sends a request to the BIOS to clear the TPM after reaching 100%.

  

  The problem is that this dialog box is not touch aware.  I can't choose the option.  The Tablet off the power it brings to the top when turned on.  Hold the flight and propulsion up/down do the same thing.  I can't find a way beyond this dialog box.

  HP helpline (Joey) is an absolute disaster.  Joey blames Microsoft and believes that it is his God-given right to do and move on to the next call or, possibly, he has no idea what she's doing.  In any case, it seemed quite determined, to the point of controversy, to return the ball.

  I think that if there was a way of connecting a keyboard I could go beyond that.  I tried a bluetooth mouse, but it has not been associated with prior and doesn't seem to work.  I was told by Best Buy as a USB/Micro USB adapter does not work with a standard USB keyboard (never tried, seems dubious to me).

  Any ideas?

  I signed up just to answer this...
  
  It happened to me. The initial upgrade worked fine, but then when I went to do a complete 'reset' I got this message at the end.
  
  I had to press volume up and down at the same time, hold them, press in and hold the power button. He had to do something with the BIOS, and then it worked.
  
  In fact, I didn't know I could press volume up and down at the same time. I thought it was one or the other. It worked well!

• Claire menu drop-down selection and chain box everytime sub vi works

  Hi all

  Is there a way to clean a menu selection (enum/ring) text of the chain box and drop-down list whenever the Subvi that contains these controls runs.

  Thank you

  Hello AnkitG,

  Looks like you're looking to reset to the default method, which can be used either on the VI in whole or a single control or indicator. This knowledge base provides more information on the subject:

  339B1U3E knowledge base: How can I programmatically reset all controls on my front?

  http://digital.NI.com/public.nsf/allkb/08E7DDAE66A7D02C86256DDA00630E75

  There is also an example of community related to this page that demonstrates the use of the methods.

  Kind regards

• Am I being scammed? E-mail address is removed from the privacy *, a Claire Hilton and a George Hilton. Am I being scammed?

  I was told that I was taken at random by Microsoft to receive money. E-mail address, that everything is going to is as follows:

  * E-mail address is removed from the privacy *. I believe that I am and have questioned this. They assure me of course that this is not a scam. But they say

  me that if I can't afford to send money for them to send money to me then he will return to the claims Department. So they're actually

  now asking for me to send them approximatelt $ 200 through Western Union. This is where I feel the scam is that this is what they

  will make their money. It's apparently for 2,500,00.00 GBP, so you would think if this amount was granted to make this world a better

  place that they wouldn't pay for the winner to receive. I tried to send it to * address email is removed from the privacy * but it does not accept

  my emails. It is my only way to know what is happening.

  Thank you

  Louise MacDonald

  E-mail address is removed from the privacy *.

  SCAM!

  see this:
  http://www.Microsoft.com/security/resources/microsoftlottery-WhatIs.aspx

• Claire queue structure

  Hello

  I have several application where I have a structure of event management event user (buttons). When I press a button, the partner of case event of this button will run.  My problem is that during the execution of this event, I want to be able to continue to be able to say, change a tab in the tab control, so I can't use the button "lock the front panel.

  What I want to do is to be able to erase the user event so if someone grows a certain button while in case, it will not run when the case of the event will be queued.

  Is this possible?

  Thank you

  Simon-Pierre

  
  

• HP 2000 claire laptops BIOS password?

  I have a laptop HP 2000 with a BIOS password that I have no idea what it is.

  My number is 68746998

  Help... Please?

  Hello:

  Reboot and try the code:

  77624318

• Claire on an old computer to give

  I want to erase an old computer to give to a friend. But I want to keep Microsoft Office is installed on your old computer.

  You must do a clean install of Windows/restore to factory state before giving the computer away and that will solve the problem of MS Office. Make sure you only give the friend (e) CD/recovery of Windows XP installation disks. MS - MVP - Elephant Boy computers - don't panic!

• After claire instaltion, Windows Update in Windows 7 keep control, is not download anything

  Hi all

  Recently, I have this problem with Windows 7. I have installed Windows 7 on my PC company, after the seizure of license, I have check for update. The progress bar continues looking for a day - in the morning to the evening, and nothing had happened. I also facing the problem that the memory has been used so - to make my slow PC. Please tell me where and how can I download the update for updating my system. I also have a PC that runs Windows 10 and I would like to re - install with Windows 7.

  Thank you very much!

  Hoc Nguyen.

  http://support.Microsoft.com/kb/3020369

  http://support.Microsoft.com/kb/3161608

  Set never 'Find updates' automatic updates and restart Windows before installing.

  Best regards, VZ

• Claire fi and latest updates of Windows 7 are incompatible, why?

  Hello

  I have a problem with the program Clear.fi on my Acer Aspire laptop, with Windows 7 opreating system. The program was working properly until a

  There are day. The system only made changes between yesterday and today, was an automatic update from Microsoft. The update was for the safety of the system.

  The way it is now, when I double click on my Clear.if desktop icon, I get the lable name expected from the program in the center of my screen. It flashes during the whole

  15 seconds and disappears. The program never starts and there is no message to wander.

  My attempt to solve this problem with the utilities available for debugging.

  .

  Its a program Acer, you have to ask for their support

  http://www.Acer.co.UK/AC/en/GB/content/Acer-Clearfi