Claire VF but Rec on ext monitor?

Similar Questions

• Satellite P205 put to sleep when to use ext monitor now cannot wake

  Laptop was fine I used perfect hibernation was very good. Selected accident sleep in vista instead of the stop. Instead of the blue light blinking amber there was no light. Now, does not start.

  Config: AMD CPU 3 GB ati video

  Day before I have Setup keyboard n external and turned the internal wide screen monitor.
  I pulled out as it is out of warranty and isolate the problem. But the same symptom.

  Turn on. OK power light and plug pack ok. Loading ok. OK RAM.
  Dell monitor and computer says benq mobile is in economy mode and move the mouse. I checked and another laptop in the same 2 screens says switch on computer rather than the power save the message.

  This makes me think that this laptop is blocked in mode 'sleep'.
  Tried resetting the CMOS via j4 without change.

  Powers of fan OK. Fan start cool OK.
  Keyboard and the wifi light do not come.

  No screen display do not light on and ext but said screens that the appliance is in mode 'sleep' and move the mouse or press the SPACEBAR.

  Any advice or assistance would be appreciated.

  Thank you
  Chris

  Disconnect your laptop external display, power supply and remove the battery.
  Leave it for a while, just connect the power and try to start the laptop.

  Operating system loads correctly?

• Equium A100: Nothing on the internal display, but on the external monitor

  For some reason, my laptop has forgotten that he has a screen attached to it.
  I can see everything if I attach an external monitor, but there is nothing on my LCD screen, even if it is on and lit. It is only black.

  I tried to update the display drivers and even the BIOS, but neither one of those who helped.

  And it's not my screen brightness, either - which does not at all. It's as if my screen has just been removed from the system. Help, please!

  Are you sure that the display is not faulty? As far as I know if your laptop is not connected to the external display the home screen Toshiba must be indicated on the screen of the laptop.

  Start the laptop without external screen and wait a few minutes. If you think that the operating system is running correctly, try to use the combination of keys FN + F5 several times to see if you get the image on the screen of the laptop.

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• Lost Bill, but now need Dell Monitor to fix it under warranty

  Dear team,

  There is a problem in the display of my screen, but it seems that I lost the copy of the invoice which asked to me by dell certified local repair center.

  Please help me with the order number or the details that may be needed to get the screen repaired under warranty.

  Kind regards

  Fahad Sayed

  You must contact Customer Service from Dell for your country. Provide the information that you used when purchasing the Dell = monitor

  Name and first name
  Phone number
  Shipping address
  Email address

  They can then use these data to find your Dell order number and the customer and provide a copy of the original invoice.

• Pavilion slimline light turns on but no signal on monitor

  the monitor is of course, but he says no signal when I turn on my pc. The hard drive does not work I think that as long as the light orange not flash or what I mean running. Only the fan runs. On the keyboard flashes only at the point when I push the power button. I use the monitor on the other pc and it works very well. I can eject the DVD tho player, while the indicator light is on. What is the problem, please help!

  I tried the steps. Reset the bios. The light of the keyboard are not after I pressed the power button which would indicate that these components are not running. only 1 blink. I tried all the steps and still no display.

• Mac usr trying to help a friend with ext monitor

  I'm helping a friend add an external monitor to the laptop.

  It's a generic monitor and when I select in the Control Panel, the laptop screen instantly goes sideways, portrait, but on the side. The external monitpor shows nothing. It seems no other options in the control panel that make sense for monitor rule addin, once again, I'm a Mac user any guidance would be appreciated. The laptop is a business and I imagine is quite wise software up-to-date. I can provide details if it is important of course.

  Thank you very much

  Henry

  Hi Henry,.

  Please contact Microsoft Community.

  To better understand the issue, please send us the following information:

  1. What is the brand and model of the computer & external screen that you are trying to add?
  2. The external monitor has been identified by the system when you connected?
  3. You have installed the latest driver available for the external monitor?

  I suggest you follow these steps and see if it helps:

  Install the latest version of the video driver

  Update your drivers for your adapter display card on the Web site of the manufacturer and the device.

  After downloading the drivers install them and try following the steps provided by Ronnie Vernon of the post above.

  Hope this helps, get back to us if you need further assistance for Windows.

• N5110 display not working, but when the external monitor is connected to come

  My screen does not work and I often hear 8 beeps at startup which indicate a problem with lcd display. But if I connect an external monitor, the LCD lights up also and then I can disconnect the external follow and work with my built-in screen. If I turned off or in hibernation etc the same problem occurs.

  Hi rndb_v,

  LCD screen could be about to fail, or it could be a cable problem. I suggest you try reseating the LCD cable. You can find the manuals here http://dell.to/1n5lDxb

• New MBP, old G5, Ext monitor

  I have always used a desktop computer and my 2008 (?) 24 "G5 external HARD & HD drive failed.  Rather than trying to revive once again I just picked a new mid 2015 MBP 15 ".  I'm working on a lot of pictures and edit them on the MBP have been a challenge.

  As the G5 monitor works and it has a Mini-DVI port, I can we as an external monitor or is it old?

  No, you can't. The mini-DVI port does not support the video in.

  (142170)

• How can I turn off the computer screen, but keep the external monitor receives the image?

  I have an external monitor attached to my laptop.  I wish I could close the laptop and still see the screen on the monitor.  I was able to do that until I had to have done repair replacement memory.

  I have an external monitor attached to my laptop.  I wish I could close the laptop and still see the screen on the monitor.  I was able to do that until I had to have done repair replacement memory.

  Change what happens when you close the lid...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/close-the-lid-on-my-notebook-and-continue-working/70630950-160A-4D94-b7ef-c30a2a80a8b3

• Satellite C660D - internal monitor does not

  Hi guys

  I plugged an external monitor to my Satellite C660D win 7 64 bit laptop computer and the Council on screen no longer works

  I went to the monitor settings and could not find the edge monitor restarted without the ext monitor and he started very well, but with no display. Restarted again with the post office and mail monitor is what I have to work with re installed win 7 and the same problem exists is the rotated motherboard or is it a setting

  Andy39
  help please

  Hello

  Usually, you can switch between the internal and external screen using FN + F5 key combination

  Try it! Perhaps out of the display is set to an external monitor only.

  But you see something on the internal display when the external monitor is NOT connected?
  Some image of the Toshiba start screen or the notes of the BIOS?

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• HP Pavilion 25xw: new monitor - Hp Pavilion 25xw

  Hello

  You just bought a new HP Envy 750-129cb here in the Canada, and it is great... but one thing:

  It came with a HP Pavilion 25xw - Moniotor

  (1) I do not think, but is the touchscreen monitor? It is not currently, but maybe I'm missing something?

  (2) it doesn't seem to be any built-in internal speakers - is this correct?

  Thank you very much.

  It does not have built-in speakers. You're not missing something, this isn't a touchscreen

  The specifications as follows

  http://store.HP.com/us/en/PDP/HP-Pavilion-25xw-25-inch-IPS-led-backlit-monitor

• Tecra S11 - noise on external monitors

  Hello

  I recently started to use external monitors with my laptop on vga port but on the external monitor is appearing sort of flicker of fine lines.
  I've tested on different monitors but im getting the same result (dell p2310h 1920 x 1080, hp 1702 1280 x 1024, old lcd 1024 x 768).
  But heres comes the interesting part, his goes far when I unplug the power cable (no visible lines more)

  While this maybe? laptop just 4 months.

  Hi computeruser7,

  I have read about this problem on other similar topics when the AC/DC adapter is connected.

  So it seems to be a problem of the ground between the AC adapter and laptop.

  You can solve the problem when you buy an adapter AC/DC 3 pins and power cord. I assume that your current AC adapter is just a version 2pin so change the AC/DC adapter should work.

  Check this box!

• Satellite C50D - PC Health Monitor shows the low battery

  I bought a C50D a few days ago and noticed that when I ran the PC Health Monitor he showed the wear of the battery as poor. I tried a few full charge/discharge cycles and it does not seem to have improved the situation.

  Is this something that is likely to correct itself in the next a few charge cycles or could I have a duff battery - the health monitor is not too well to evaluate the battery charge.

  Ian

  New batteries must be charged and discharged several times in line to achieve the best performance.

  I'm not quite sure how many times you have to repeat this procedure but I recommend you monitor the battery working time m.

  Of course, battery working time depends on the use of the laptop, but you should be able to see the improvement.