Clarification of FDM

Similar Questions

• Clarification of integrative support ERP

  My apologies if it emerges as a silly question but I would like clarification on the versions supported by the integrator of the ERP, specifically with respect to PeopleSoft Enterprise 9.0 financial management (by guide the only version supported).
  
  Does this mean that ERPI can reach in to PeopleSoft 9.0 to data sources in the ERPI (data and metadata) or FDM (data)? That's why we need to produce a flat file out of any version of PeopleSoft that is not 9.0 (or write a script to integration?)? Or is the version the more oriented towards Pierce? In other words, 9.0 is the only version to which you can drill? So if we were on version 8.8, we would need to produce a flat file extract and load by FDM, and we would be able to pierce through EMP app (HFM or HP) target to the FDM, but not all the way to the GL (PS 8.8) since it is not supported.
  
  My understanding is correct?

  That's right, only 9.0. 8.9 will be added in the future, but for 8.8, you will only be able to retrieve data via an integration import script that does not support to drill holes in.

• FDM has stopped working with firefox

  Free Download Manager has stopped working with firefox after I speedup firefox opening. (not after restart or update of firefox) Before that, I used FDM on firefox. I already try with restart firefox and follow-up of the implementation under the quiz "Windows Media or other plugins stopped working after Firefox update | Firefox Help", but none of them worked.

  When you say after you speed up Firefox, do you mean you used the reset feature? You can tell because Firefox will create a new 'Old Firefox Data' folder on your desktop when you reset.

  The Reset function deletes your extensions as part of the cleaning process. You probably need to reinstall FDM from its original source. Maybe the Addons site? https://addons.Mozilla.org/Firefox/

• Clarification on iMac 21 "memory

  Hi, I want to buy an iMac 21 "and I need a clarification on the configurable compared to the maximum memory at time of purchase. It is written in the configuration page "notes that the iMac 21.5 inches comes with 8 GB built-in memory to the computer." "If you think you may need in the future more memory, it is important to update at the time of the purchase, because the memory cannot be upgraded more later in this model. So I guess that means, if I purchase only 8 GB of memory, I'm stuck with it and I can't upgrade (add memory) later to 16 GB.

  BUT if afterwards I need different memory and I decide I need 16 GB, I can scrap (remove) 8 GB and install a memory of 16 GB instead? It is simply because I don't want to spend money for 16 GB if I'm happy with the 8GB...

  Thank you.

  No, you can't.

  (137939)

• Clarification needed Pavilion a1120n memory upgrade

  First time on the Forum, need for clarification after reading others entry and to collect the necessary information on the PC in question.

  HP Media Center Edition Pavilion a1120n

  Processor: Pentium 4 519 (p) 3.06 ghz

  Motherboard: Asus LRTP - THE (3 goldfish - GL8E) front bus at 800 mhz

  Will support maximum 4 GB of ram

  Unit is equipped with 4-240 pin Dimm, unbuffered, non - ECC 533/400 mhz sticks memory memory DDR2, dual channel architecture

  This office has 2-258 or 516 MB PC2 3200 DDR SDRAM OEM.  I opened the unit to check for this.

  OEM preloaded with Windows XP Media Center Edition.

  Now, most anyone looking at this request, probably why I'm wanting this on such an obsolete machine...

  I have bought new at the beginning of 2005, used the PC for a few months, remarried & it packed to move.  My husband had a Pavilion, so instead of having 2 running side x side, I copied my files in his unit, left (the most recent of the two) packed mine, thinking that we would need it down the road.  The road became long 7 years.  More to the story, but I'll spare you the pain. The only way I can use this material is upgraded to Windows 7 home & I need to increase the memory to install even.  It will be dedicated to the dissemination of music on the internet in the shop, period.

  Here are the complete specs for your HP Pavilion a1120n desktop and it is card mother PTGD - THE (Goldfish3). Please consider the purchase of 2 of the CORSAIR 2 GB Kit (2 x 1 GB) 240 pin DDR2 533 (PC2-4200) VS2GBKIT533D2 or 2 of the Crucial 2 GB kit (2 x 1 GB) DDR2-667 PC-5300 #CT475923 to bring your computer to the 4 GB maximum, it supports.

• Seeking clarification on the SFD in AKM Brushless Servo Drives

  Dear members,

  I'm looking for clarification on the smart feedback device (SFD) installed in the series of servomotors AKM. There is little information available on this subject in the specifications. It appeared that it offers a very high resolution, information on the position of the rotor high precision signals.

  1. how exactly is the PCG provides the position of the rotor?

  2. is there a provision to contract low resolution effect Hall of EPD type feedback?

  Thank you.

  Ansari07

  Hi Ansari07,

  I don't think that this level of control is possible with the AKD. The reader is supposed to close its own current loop on board for the control of switching and outputs of phase. The AKD offer couple, speed or modes of control position, and you can talk to it by Ethernet on the service port, via a field such as EtherCAT or CANOpen bus, or with an analogue signal +-10V or step/dir commands.

  I don't think you can get around all of the internal firmware in the AKD and get direct control of how current passes through the phases.

  Best regards

  Nate

• access licenses client license Clarifications + Server 2012

  Hi all

  I need some clarification in licensing to provide the solution that is right for my customer.

  One of my clients purchased Dell server with preloaded Windows Server 2012 OS (Standard Edition) us (from my company) to replace the
  existing server that has windows Server 2003.

  Now, the thing is customer want to transfer/migrate their client access licenses Server and Terminal Server CALs for Server 2003 to 2012 server.

  But is it possible to transfer/migration of CALs client Server 2003 to 2012?

  In the case of is not possible.
  May I suggest Windows server 2003 to install as a virtual operating system in Hyper-V
  to use their existing CAL?

  And is it as additional permit is required to use Server 2003
  Hyper-V?

  Waiting for your valuable response/solution.

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Clarification, pls. Any use of the SD card before update?

  Please do not use this as a cause of ranting, etc, but I need a simple clarification that I can't find clearly in any of the threads SD.

  If I understand correctly, an SD card is completely unusable now. For example, the files cannot be transferred here via a program such as Quick Office.

  Is this correct? It would be completely inaccessible as it sits.

  Thank you

  That is right. We expect a software update to enable it. at this time there is no support.

• MFP HP LaserJet Pro M126nw: Clarification of the use of HP Laser Jet MFP M126 nw Pro Page

  Hi support them.

  Recently, we bought a new HP Laserhet MFO M126nw Pro. The cartridge came with the new printer. I need a clarification of the HP Laserjet Pro MFP M126nw on the usage Page.

  We want to know how many pages that the printer has taken so far, printing and also how many pages is analysed and the copier took how many pages.

  I have attached the report using page for your reference.

  Please specify the things below.

  Pages for the scanned copy = 65

  I think he has counted only scanned copies 65.le is okay?

  2. What is Monochrome pages printed from copy = 66

  3. What is pages scanned host = 86

  4. print engine:

  1. total Impressions showing 829.

  Overall, I think it's showing printing, copier, 580 the scanned pages. Is this OK.

  2. What is jam events?

  It's showing 1.

  3. What is EconoMode Impressions?

  showing 0.

  4. What is monochrome prints?

  showing that 829

  Need to clarify the details above for my knowledge.

  Your support is much appreciated.

  Thanks in advance

  Concerning

  R.Pradeep

  the digital and print values are different.

  pages scanned copy 65 - this means that 65 pages have been executed by the scanner with someone using the copy function. the report shows 66 printed pages 'copy' which means 64 of these copies were only a single copy and 1 scan someone made 2 copies - which gives you a total of 66 pages printed from the copy function.

  pages scanned to accommodate 86 = that means 86 pages were executed by the scanner with a person who uses the "scan to network folder" or "scan to computer" function

  That's a total of total of 151 pages run through your scanner. only 2 values that you add to the scanner are the "copy" and «scan to host» numbers copy of 65 + 86 scan-to-host ='s 151 total scans

  total impressions are 829. pages printed from copy fuction are 66 - if you subtract 66 829 that gives you the number of pages that have been printed from a computer = 763

  763 pages printed computer + 66 pages printed using the copy function = 829 total number of pages printed

• DVD disc not visible / Ko 314060 necessary clarification

  Background: following a fresh install of Windows 7 on a new hard drive, the DVD drive in my laptop (Dell XPS M1730) was not visible. I bought the laptop computer with an earlier version of windows, and everything worked normally until the original hard drive crashed. When the DVD was not recognized after the clean install, I assumed at first it was a hardware problem and bought and installed a new DVD player. This does not resolve the issue. The DVD player itself performs a power upward when the system is turned on. It opens and closes normally. It turns when a DVD is inserted and then slowed down after a minute or two. To troubleshoot I started working at Ko 314060 (your CD-ROM or DVD drive is not recognized by Windows or other programs). http://http://support.Microsoft.com/kb/314060

  The first three resolutions has not remedied the problem.

  Question: I am unable to follow the steps in resolution 4 as written. Step 3 says "In Device Manager, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Surdesinstaller." My Device Manager does not a selection of ' readers CD-ROM/DVD-ROM ", I'm looking for clarification on the procedure of resolution 4 update or reinstall the driver.

  This is what my device manager:

  Solved.

  After leaving open the Device Manager and the laptop unattended for an extended period (over an hour), I returned to find a pop up advising me that the DVD device driver has been installed, and a selection of CD-ROM/DVD-ROM had been added in the Device Manager. The DVD is now visible.

• Clarification of Nexus VPC

  After a recent deployment of the switch, I see some very strange transmission problems layer 2.  I'm not sure if this is related to a problem of configuration on my part.  I would like clarification on the VPC, and I hope you can help me.

  It is my understanding that when you have a series of double-sided VPC between, say, a pair of N7700 and several pairs of Nexus 9 K or K 5 switches, that all the field of VPC ID must be different.  However, a contractor told me that each number VPC - associated with the uplink of etherchannel to the Nexus 7Ks - must also be unique.  A graph that shows my dilemma is attached.

  Question - I am ok to reuse the port-channel number 3 with the VPC 3 for all pairs of leaves, or if they should be different?

  Hello

  What you show, it's perfectible acceptable. The two areas of vPC in the Nexus 9000 layer, domain of the vPC 117 and 118 in your diagram, have no knowledge of the other, and so the same vPC and port channel number can be used.

  As you said, you obviously have a unique numbering to the layer of Nexus 7000.

  Concerning

• Clarification: Default Http connection suffix is MDS/BES?

  Hi all:

  I had reviewed most if not all doc and discussions on the definition of the networks for the http connection. (Thanks Peter Strange)

  I need clarification on the behavior if no suffix is provided (example: Connector.open ("www.blackberry.com"))

  This is supposed to Connector.open ("www.blackberry.com;deviceside=false") - a BES/MDS connection as default

  On my Storm V4.7.0.75 no suffix works but "; deviceside = false' does not work.

  Since my Storm is not part of the company's network should work...

  Am I missing something?

  OLAF

  Verizon is an exception, they have a direct TCP stack available on the device.

• ZBF - Clarification

  Hi all

  I'm looking for a little clarification regarding Zonebased Firewalls (Cisco 1921)

  I have a ZBF with a number of internal areas, non of these will need to talk about them, I have an uplink to a router upstream provider that provides return services to our data center for remote sites. Am I right in thinking that I need to set up the interface between the ZBF and the router of the provider in its own area?

  Customers will access services back in our data center, but they will have to go through this WAN area.

  I hope this makes sense, I think I'm on the right track, any help would be appreciated.

  Thank you

  Edge Site                                                                              HQ

  Internal areas:-(ZBF)---(PROVIDER ROUTER) -WAN-(PROVIDER ROUTER)---(LAN AVEC SERVEUR de FICHIERS)

  Hi Craig.

  When you configure ZBF there are a few rules:

  security zone = interface / interfaces.

  Data between two security zones created is droped by default

  So you need to add interfaces in areas, create pairs of area (that make sense) and assign a policy to this area-pair, in politics, you select (using the class-maps) shiuld traffic that you want to browse your device and check its status.

  Example configuration for your scenario:

  IN security zone
  OUT area security

  interface item in gi1 (inside interface)
  Security IN members area
  int Gi2
  security to OUT-members area

  type of class-card inspect OUT_CM IN match-everything (this traffic we want to enable)
  use any desired match criterion (addresses, protocols, ports, DSCP, etc.)
  !
  policy-card type check IN OUT_PM
  class type check IN OUT_CM
  inspect

  (inspect means that an answers for your sessions will be allowed to return)
    
  IN source zone destination pair IN security - OUT OUT
  type of service-strategy inspect IN OUT_PM

  You can use many classes in a single policy map, the main point is that you must use the same type (inspect, according to ZBF)

  If you have several internal areas, you must write several pairs of zecurity, and if you lazy enough-use even political in each zone-pair, or use of individual policy for each zone-pair.

  --

  Best regards

  Alex

• Need a Clarification on the installed component and run Simulator Configuration

  Help!

  I need clarification on what the plugin Eclipse is telling me. There are two parameters that are confusing me. For components installed (found under preferences/Window/BlackBerry JDE/Installed Components), I have a choice of 5.0.0 4.7.0,4.6.1, 4.6.0 4.5.0 and 4.3.0.

  Depending on which component I select when I go in the tab Configurations.../Simulator/course walk, I see a different mix of devices.  In all cases, there is a default Simulator.

  Initially, I assumed that each JDE component supports a mixture of different devices, and that is it compiled correctly, I would be assured that the app would work for all devices on the tab run Simulator Configuration.  In my tests, I found theopposite.  I also assume that, for each component of the JDE, there is a 'default' Simulator that was representative of all devices in the drop-down list run Configuration Simulator.  In my tests, am not sure what actually represents the Simulator 'by default'.

  Can someone clarify how to JDE and Configuration simulators run installed interact and a developer show how to ensure that their application is running on a mix of devices?

  When I finally get to the point where I am ready to deliver, what are the points of decision of installation?  Is it enough to simply require a specific version of an operating system (for example 4.7?) or do I have to create a grid and check the two model number and version of the operating system?

  Thanks for your help.

  "currentT shipping Curve 8330 come with OS 4.5" - they must be, as far as the carrier released a version 4.5.

  "Your statement that most consumers do not upgrade surprised me too" - only I support!  You might get a different opinion of someone else.  But the question is why would?  And our world app downloads indicate that he is did not upgraded phones out there.

  "I guess you are right in this assumption of statementI you are right in this statement"

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  "If there is some Curve 8330 there running 4.5 OS, it's a configuration supported." - correct

  "Construction of the 4.3 OS will be one where the menu appears in the upper right and the built 4.5 OS will be one where the menu is out."  Sounds good

• Clarification of the policy of startup SAN

  I would like clarification on the policy of SAN Boot. I was always under the impression that you were supposed to use the storage port WWPN. But what happens if you have many ports of storage from the table (16 for example), this is not possible.

  The purpose of this policy is to simply force the HBA to open a session in the SAN fabric?

  If Yes, can I use one of my real picture or just make one, correct?

  Since all zoning is done by the SAN switch (Brocade/MDS/Nexus) and LUN masking to the level of the table, I think putting the real WWPN to a storage port is not necessary.

  Thanks for any clarification.

  Yes, a 'false' WWPN will work and they connect to the SAN infrastructure... Photos attached show 2 ways to do this... However, if you install Windows 2012/Hyper-V, I suggest using WWPN valid because it seems not to be able to manage multiple ESX possible access paths when you first install...