Classic BlackBerry set up questions - last get cannot connect to the wifi page

Similar Questions

• The blackBerry Smartphones No. MMS option and cannot connect to the application server

  Good evening

  For some reason any I can not receive or send MMS on my Blackberry 9520 Storm 2. I still do not see the ability to send a picture as a text when I go on my photos. I don't know if it's the phone or my provider. I have my 9520 unlocked on AT & T with a package data unlimited talk and text unlimited. I tried to have photos I was sent as well, but it was also no chance that I NEVER received a text.

  The second problem I have is that I can't access the Blackberry App Store. Try whenever I have it says that it cannot connect to the server.

  Any help?

  Edit: The problem of the App Store is no longer present (off the network and turned it back), but the MMS problem is still present.

  Hello!

  I suggest the following:

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! But, the fact that you can't do SMS or MMS seems to indicate that they are not part of your plan service provider - that is why, if the above does not help, then contact them to see if you who are on your plan on their part.

  Good luck and let us know!

• WRE54G cannot connect to the configuration page

  I use WRE54G and I can't connect to the device.  I have connected to my computer via a cat5 cable, but I can always connect to the Setup page.  Right now I'm getting a solid light.  I tried to connect to the unit when it shows the kept my "no internet wireless network
  access and have this problem for a few days.  I tried to use a static ip address and reset the unit, but nothing has worked.  I can't ping the unit either.

  I am very good with computers, but I can't understand this thing.

  What is the model of the router?

  By default the ip address of the WRE54G is 192.168.1.240... So assign ip address 192.168.1.10 subnet mask 255.255.255.0 and default gateway 192.168.1.240 on the computer which is connected to the WRE54G via cable.

  If it's still could not open the configuration page, then restart the WRE, power cycle the WRE and then try again.

• cannot connect on the start page, as the owner.

  computer froze on the star page. cannot connect as an owner.

  Hi mycasmas,

  1. don't you make changes before the show?
  2. the problem persists with other users accounts?

  Step 1: We recommend that you check if the problem persists in safe mode
  a. see Description of the Mode of course in Windows XP startup options
  b. in the menu advanced startup options select Safe mode and press on enter.
  c. connect to your user account.

  Step 2: If the problem does not persist in safe mode, check if a non-Microsoft program is causing the problem
  see How to configure Windows XP to start in a "clean boot" State .
  b. in the article, follow the method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit that is the program that is causing the problem, then uninstall it.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• EA-4500 cannot connect in the configuration page

  I try to connect to my EA4500 Setup page. I have the firmware "cloud connect" and when I get redirected to the "Linksys Smart Wi - Fi" page in my browser, I try to log in as usual. He accepts my username and password, then I get a page that contains a rotating chart and it says "waiting...". "He eventualy expires and brings back me to the login screen. I have tried rebooting my router and it does not help. I also unplugged the modem from the internet connection and entered the main router password, and gives me the same answer that if I tried to connect via the cloud.

  The only thing I can think of would be to do a factory reset of the router, but based on what is happening here, I'm frankly scared that I will never get my router online. I really wanted this cloud thing to work, but if I can get connected I will probably be back to the old firmware. Linksys gave us?

  I tried on several computers in the House and still have the same answer - no access to the router. At the end of the day, I did a factory reset and was finally able to get into the router. It was a pain to have to re - install my router, but at least I got all devalued parameters.

  For memory, the firmware had not changed since the introduction of the services cloud in June/July. I have the same exact firmware I downloaded in July. The only thing that has changed is that Cisco renamed "cloud connect" web interface for "Smart Wifi."  The web interface seems a little faster, but there are still a lot of wait time.

  I must be honest, based on this event, I was ready to go back to the old firmware, however, I'll give it one more chance to see if things will be better, or at least stabilize...

• Cannot connect to the Eprint Page?

  Try to connect to the Eprint as usual, but I keep getting the following error:

  Ajax submit failed: Error = 403 Forbidden

  This has been going on for 24 hours now and ePrint has not worked since yesterday. Tried pulling the printer offline and back on, disconnect the power supply and the other usual steps. Now, I can't even login to check the printer status or employment. Any ideas?

  Hi stockalugroupe,

  Please try to connect with another web browser (IE, Chrome, Opera etc) and tell me if this solves your problem.

• Z3 blackBerry cannot connect to the wifi router

  Hello!

  Today, I got my phone.

  After selection of the language of the user and skip the insertion of the SIM card, to the window "to connect to WiFI", I select my wireless network and I type the password, but the massage was 'failed connection' could not connect to the WiFi. The appropriate settings were made in the settings of the router

  The first is I use this kind of phone and I don't know what to do to connect to the wifi router?

  Can you help me?

  Problem solved. A discrepancy between the MAC has been marked on the box and the real of the phone. The factory error.

• Cannot connect to the admin page of R6400 laptop, only on iPhone

  I installed a new router R6400 but can not access the admin of my laptop page. I was able to access it from my iPhone, so I am able to connect to the internet.

  I have talked to support 2 or 3 times and they always say the same thing: reset the router, type 192.168.1.1 in the address bar, try routerlogin.net or routerlogin.com, ping the router, check the IP address, etc. etc. I even tried to simply connect to the router via an Ethernet cable and still no go.

  Is someone can you please tell me why it does not work? I have read both articles, and they all seem to be saying the same thing. I just want to be able to access the admin of my laptop page. Someone at - he found a solution to this?

  I activated just improved Protected Mode and it worked. Don't know if it's the best solution (saw where to uncheck enable protected mode was an option too), but at least the admin site open - finally!

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• How can I fix it? "Money cannot connect to the store purchases.   If you have any firewall software, make sure it has been set to allow communication on port 443.

  This message p [ops upward when I run iTunes]

  Money cannot connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  How can I fix it?

  me too... same problem... just started

  iTunes can't connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23

• I had an existing version of CC student that has now expired. When I go on my account that it says that I have a free version of 30 days, but none of my programs open, I get that I need to subscribe or that it cannot connect to the server. Help

  I had an existing version of CC student that has now expired. When I go on my account that it says that I have a free version of 30 days, but none of my programs open, I get that I need to subscribe or that it cannot connect to the server. Help!

  If you have a subscription, you have no programs to call yours.  Get a subscription and the problem should be solved.

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Cannot connect to the Family Safety website

  I'm sorry if I posted this in the wrong place, but Family Safety does not appear as a product of Windows Essentials...

  MOD: It's because he was transferred on Windows forums. I have moved your question to you 

  Quesiton:

  For some reason I can't connect to the Web page for the family (https://familysafety.microsoft.com/) security controls

  I see the browser tries to do something, it passes between the two following URLS 3 - 4 times before giving up.

  https://Familysafety.Microsoft.com/?WA=wsignin1.0

  https://login.live.com/login.SRF?WA=wsignin1.0&rpsnv=12&CT=1408500875&RVER=6.4.6456.0&WP=SAPI&wreply=https:%2f%2Ffamilysafety.Microsoft.com%2f%3Fwa%3Dwsignin1.0&LC=3081&ID=286847

  When he does not get the following error message;

  "Connect: something was wrong and we cannot connect you right now." "Please try again later".

  There is not much other info on the Web page other than an image of laptop with 'your account, our priority '.

  I tried to log in security for the family for 24 hours now with the same result every time.

  I tried to use the browsers Internet Explorer, Mozilla & Chrome, same result every time.   I tried two different places, home and work.

  My e-mail and password are correct;  I can connect to mail.live.com using the same credentials which, whatever the reason, still works.

  Only, I can't access security controls for the family on the Web site.

  Anyone have any ideas?

  Matthew

  Well, I reacted to the error description of the psionic with a known antidote to the symptoms he describes. This is clearly not the solution in this case, I went hunting and found dozens of threads on exactly the same problem. The solution the most common seems to involve logging on http://profile.live.com with the FS username and password, then using the change at the top button on the left to enter your first and last name. If you are already connected to another account, you must do it in a new browser session, for example in mode InPrivate of Internet Explorer.

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!