EA-4500 cannot connect in the configuration page

Similar Questions

• WRE54G cannot connect to the configuration page

  I use WRE54G and I can't connect to the device.  I have connected to my computer via a cat5 cable, but I can always connect to the Setup page.  Right now I'm getting a solid light.  I tried to connect to the unit when it shows the kept my "no internet wireless network
  access and have this problem for a few days.  I tried to use a static ip address and reset the unit, but nothing has worked.  I can't ping the unit either.

  I am very good with computers, but I can't understand this thing.

  What is the model of the router?

  By default the ip address of the WRE54G is 192.168.1.240... So assign ip address 192.168.1.10 subnet mask 255.255.255.0 and default gateway 192.168.1.240 on the computer which is connected to the WRE54G via cable.

  If it's still could not open the configuration page, then restart the WRE, power cycle the WRE and then try again.

• Cannot connect to the Configuration of iballBatonADSL2RouterModem page

  I have Win 7 Machine, to reconfigure my network security cannot connect to the Configuration of iballBatonADSL2RouterModem page

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  Looks like you are unable to connect to the Modem router configuration page. Please answer a few questions to refine the question.

  1. what happens when you connect to the Setup page?

  2. do you receive any error messages?

  3. you try to configure for the first time?

  You can view the guide provided by the manufacturer of the router.

  http://www.iballbaton.com/download/118/IB-WRA150N%20User%20Guide.PDF

  If the problem persists, I suggest you to contact the manufacturer of the router.

  http://www.iballbaton.com/enquiry.aspx

  Hope this information helps. Get back to us if you have more queries about Windows.

• cannot connect on the start page, as the owner.

  computer froze on the star page. cannot connect as an owner.

  Hi mycasmas,

  1. don't you make changes before the show?
  2. the problem persists with other users accounts?

  Step 1: We recommend that you check if the problem persists in safe mode
  a. see Description of the Mode of course in Windows XP startup options
  b. in the menu advanced startup options select Safe mode and press on enter.
  c. connect to your user account.

  Step 2: If the problem does not persist in safe mode, check if a non-Microsoft program is causing the problem
  see How to configure Windows XP to start in a "clean boot" State .
  b. in the article, follow the method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit that is the program that is causing the problem, then uninstall it.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect to the admin page of R6400 laptop, only on iPhone

  I installed a new router R6400 but can not access the admin of my laptop page. I was able to access it from my iPhone, so I am able to connect to the internet.

  I have talked to support 2 or 3 times and they always say the same thing: reset the router, type 192.168.1.1 in the address bar, try routerlogin.net or routerlogin.com, ping the router, check the IP address, etc. etc. I even tried to simply connect to the router via an Ethernet cable and still no go.

  Is someone can you please tell me why it does not work? I have read both articles, and they all seem to be saying the same thing. I just want to be able to access the admin of my laptop page. Someone at - he found a solution to this?

  I activated just improved Protected Mode and it worked. Don't know if it's the best solution (saw where to uncheck enable protected mode was an option too), but at least the admin site open - finally!

• Classic BlackBerry set up questions - last get cannot connect to the wifi page

  Hi all

  far I have set up 30 + new Blackberry classic but the last issue is that once I have connected to the wifi I can't go through this page and the only options are previous!

  any ideas on how to move beyond this stage so I can complete the set up process?

  understand the question - under the date and the time of its establishment on auto update and this showed February 25, 2015 @ 9.31 am. changed to the current date and time and now I can exploit and set up the phone.

  Hope this helps others.

• Cannot connect to the Eprint Page?

  Try to connect to the Eprint as usual, but I keep getting the following error:

  Ajax submit failed: Error = 403 Forbidden

  This has been going on for 24 hours now and ePrint has not worked since yesterday. Tried pulling the printer offline and back on, disconnect the power supply and the other usual steps. Now, I can't even login to check the printer status or employment. Any ideas?

  Hi stockalugroupe,

  Please try to connect with another web browser (IE, Chrome, Opera etc) and tell me if this solves your problem.

• WRT54G V8 cannot connect to the web-based configuration page?

  Earlier, I reset my router and was able to use 192.168.1.1 to visit the configuration page based on the web while trying to restore a home network, now that I have a new computer using Windows 7 that can not use the easylink advisor. I was able to get on the page update my SSID and WEP key. But when my wireless devices were still having problems to you connect to the internet, I tried to go back to the page and found that I can't seem to connect, even if my office is able to connect to other websites very well.

  Anyone know what I can do wrong? I use Verizon DSL. I was able to ping to the router and all tests have shown that it was connected fine, but I still can't get on the configuration page and my laptop can't connect to the network. I tried to reset the router again and still nothing. And Yes, I went through several cycles of power. I have also tried to move if the network card on my computer, but the computer said it was impossible to create a card for him, although at the time I had listed as a home network.

  Wireless on 192.168.1.1 connections often fail.  Using the router configuration pages, always use a computer that is connected to the WRT54G.

  If the above does not solve your problem, so here are my other tips to see the router configuration pages:

  You don't need an Internet connection. 'web Pages' of the router are integrated into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  Point your browser to 192.168.1.1, and then connect to your router. Your username must be left blank. Your password is "admin" (without the quotes), unless you changed it.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  Some Zone Alarm users reported that the addition of 192.168.1.1 to their address list "of trust" solved the problem. This trick can also work with other firewalls.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. A report with this problem and also specify the brand and exact model of your modem (not router) number.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system.  The router should work, but you will need to configure your router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  If you still have problems, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• Some Web pages do not allow (safari cannot connect to the server)

  I can't access some Web pages like the movie online, eBay, Amazon, etc. sites, when I try, I got the note as 'safari cannot connect to the server' and my chrome also got error like massage "this webpage is not available" more my App Store unable to work properly can not download updates»» I tried to delete all the data of the website... and uninstall extensions, but there was not work //I got a MacBook Pro 2014 middle with OS X EL capitan 10.11.2//some on help me please

  Please remove the 'ESET' product (if you have it installed) by following these instructions. If you have a different version of the product, the steps may be different.

  Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.

• E2500: 'the connection to the 192.168.1.1 was interrupted." When you access the configuration page.

  Trying to access the configuration page, 'the connection to the 192.168.1.1 was interrupted."  I'm wired into the router.  Any idea of what is the cause?

  Ugh, I'm stupid... I was using the button in the back instead of the reset button on the bottom.  Thanks for the tip-off that the reset method should have worked.

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• LAPN600 could ' t connect to the admin page

  Hello.

  The first time that I also tried to connect to the admin page it worked. But now when I try to connect if I'm lucky, I can log in, but after that I just got "page cannot be displayed".

  I HAV tried to reset the LAPN600 but it dosent resolves the problem.

  Someone at - it more then me that have this problem?

  I found the problem. It was me

  When I tried whit my windows 7 computer was wired and my Windows 8.1 was wireless.

  I found a setting "Access of Configuration management->" Wireless: activate

  So my problem is solved.

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

  Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

  See this support article - difficulty of problems connecting to websites after Firefox update