Classic cribbage accidents

Similar Questions

• BlackBerry smartphones my 9780 is constantly freezing

  My 9780 is constantly freezing. A battery pull is all I can do to unlock the device, but it still freezes quite quickly.

  If I turn on the phone and check the messages and social feeds the phone usually works normally until I stop.

  Once I hung up, or put it in my pocket it freezes.

  The only case where this problem occurs, is when I have the phone connected to my computer.

  Can I have the phone while charging through the outlet and it freezes, but it never happens when I am attached to my computer.

  It of extremely frustrating and left me without a reliable way for people to join me.

  Here is the info abot the version of the software, applications and free space:

  Info on the device

  Your carrier: Mobilicity

  Model information and the version of the OS (go to settings, then Options, then):
  BlackBerry 9780
  6.0 bundle 863 (v6.0.0.285, platform 6.5.0.54)

  Add top to profile you if you don't wat to type in all the time.

  Apps and free space
  ACEs Classic Cribbage
  King of FREE backgammon
  Bejeweled - with the Compliments of BlackBerry
  BlackBerry App World
  BlackBerry Application Center
  Identity of blackBerry
  BlackBerry Maps
  BlackBerry Messenger
  Confrerencing Mobile blackBerry
  BlackBerry Podcasts
  BlackBerry Protect?
  BrickBreaker
  Browser
  Calculator
  Calendar
  Call the command blacklist Lite
  Clock
  Contacts
  Documents to Go
  Configuration of messaging application
  Facebook
  File Explorer
  Google Maps
  Google Talk
  Help
  Home screen
  Klondike
  Media
  MemoPad
  Messages
  Options
  Password Keeper
  Password Lock
  Phone
  ScoreMobile for BlackBerry
  Setup
  Slacker Radio
  Social RSS
  Sudoku
  Tasks
  Texas Hold'Em King 2
  TTY support
  TuneIn Radio
  Twitter
  Voice dialing
  Word Mole
  YouTub

  Space free 219,5 MB

  File before and after a battery to remove/replace. (Go to settings, then Options then status): 230349846 bytes

  A battery pull fix your problem?

  Yes - it's the only solution, and there short duration

  Hi all. Break up, I told my boss what was going on. He said that he is on his 5th BB, and he has had similar problems in the past. He told me that his problem was resolved by removing his press card. Something about this has been cause of conflict in operating system

  I removed my media card & 3 hours later my BB is still running.

  Thank you for your comments!

• Mail 'Classic' split screen that went wrong

  How to restore "classic" split screen mail? I accidentally dragged the divisor completely to the bottom of the screen that it, and now I can't move it to the top.

  Here are a few suggestions (the last of them is maybe you need):

  Show/Hide Preview mail pane

• I accidentally hit the button to upgrade outlook and I can't understand how to remove it.

  Original title: HELP

  I accidentally hit the button to upgrade outlook and I can't understand how to remove...

  I accidentally hit the button to upgrade outlook and I can't understand how to remove...

  You mean you use Hotmail, Messenger MSN or Windows Live mail via a web browser (Internet Explorer, Firefox, Chrome, etc.) and you have decided to try to "Outlook.com" (i.e. a product different from Outlook Express, Outlook 97, 98, 2000, 2002/XP, 2003, 2007, 2010 or 2013) and you do not like the look of it and the look and feel classic back?

  1. Click the "gear" settings in the upper right, near where your name appears
  2. Click on "return to Hotmail.

  For more information on Outlook.com consult this article:
  Update of Hotmail for Outlook.com
   
  Photo of what you do:
   
   
  If this isn't what you mean, please come back and clarify now that you know more information about what may assume people in light of what you have so far.

• Vista Snipping Tool - accidentally deleted from the computer. How can this be restored?

  I accidentally deleted the tool cutting on my windows vista computer.  I sent the tool cutting on the desk and I should have created a shortcut on the desktop. I thought I was remove a shortcut and not the actual tool. I looked on the computer of the tool, but it seems to have disappeared completely.  I can't run system restore because it was some time before I realized my mistake and you do not have a date for the restoration. Searched in the downloads of Microsoft but only capture tool is for tablets.  Please help as I really like this tool

  Hi GailWilton,

  If you open your Windows Explorer program, go to the C:\windows\System32 folder, you see the file Snippingtool.exe?

  If so, you should be able to right click and do a sortcut to your desktop or add a shortcut to the Quick Launch bar

  Otherwise, you can try the following steps and check.

  Step 1:

  Try refreshing the Snipping Tool installation. This tool is part of the Tablet PC optional components in Windows Vista.

  a. open Control Panel, click Classic view in the task pane.

  b. double-click programs and features.

  c. click on the 'activate Windows features and turn off' in the task pane.

  This window may take a few minutes to display.

  When the options appear in the list, scroll to the "Tablet PC Optional Components" and remove the check mark for this element.

  d. click OK, leave everything and restart the computer.

  Once the computer restarts, go back to control panel and repeat the same procedure.

  This time the check box adds the "Tablet PC Optional Components".

  This will install these components in the system with a new copy of all the files.

  Step 2:

  You also, try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Also check out the link:

  The cutting tool: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Snipping-Tool-frequently-asked-questions

  Hope this information is useful.

• Classic BlackBerry cannot unlock my Classic

  I have a simple password that I used to unlock my new Blackberry classic. Today my phone refuses to accept the password.

  The password was created recently, but I've used it since a week without a problem. It's fresh in my mind and I am certainly not go wrong. I had shared with my son who also had no problem unlocking my phone until today.

  The previous questioners with this problem are that they accidentally entered numbers instead of numbers, or vice versa. It is certainly not that. Or I use caps accidentally.

  The only option I can think of is to wait for the battery to go down and see if it works after having been completely off for awhile (I already tried a quick restart with no luck).

  Has anyone encountered this before? Any advice?

  Thank you

  Of course no sooner create this thread then solve this problem.

  The phone had asked to type me in "blackberry" before making further attempts of password. I was so wrapped up in what could be the password that I had not noticed above the password input box.

  Once I did I found that my password was working again. Don't know how I got so many bad tent first but leaving HERE dealing with another person still has the same issue and needs ideas.

• Accidentally deleted battmessage2 (or a similar name) in regedit... help!

  Hi guys; I have a Thinkpad T61 with Windows XP.  I went into regedit to edit this registry key...

  HKEY_LOCAL_MACHINE\SOFTWARE\IBM\PWRMGR\Data\BalloonStayTime

  .. .in the hope that this would eliminate the black exclamation point inside a triangle which has now popped up, which indicates that the battery installed is not a real battery Lenovo (side note: change BalloonStayTime do not get rid of the message).

  In a gesture of bonehead classic, while in regedit, I accidentally deleted a different registry key, called something like: HKEY_LOCAL_MACHINE\SOFTWARE\IBM\PWRMGR\Data\BattMessage2URL

  What I deleted is the real link that go you if you double-click about to exclamation.

  Yes, I know I should have saved my registry key before making changes, but I did not because I am what is called a fool.

  I googled cela but can't find it so posting it here in the hope that someone can tell me the name of this key and URL that goes with.

  If it's useful, he had a right to it (always there).

  HKEY_LOCAL_MACHINE\SOFTWARE\IBM\PWRMGR\Data\BattMessageURL

  that includes the URL www.lenovo.com/batteries.

  Can someone else with Windows XP and a Thinkpad T series look at the location HKEY_LOCAL_MACHINE\SOFTWARE\IBM\PWRMGR\Data and tell me the name of the key battmessage2 and the URL that I need to add in?

  Kind regards

  Katherine

  Here is the entire tree. I hope it helps. It is of a CTO 6459 T61/p.

  [HKEY_LOCAL_MACHINE\SOFTWARE\IBM\PWRMGR\Data]
  "MaximizeBatteryAtLow" = DWORD: 00000000
  "ExpandSchemePage" = DWORD: 00000000
  "ExpandBatteryPage" = DWORD: 00000000
  "ChargeStartControl" = DWORD: 00000000
  "ChargeStopControl" = DWORD: 00000000
  "ChargeStartPercentage" = DWORD: 00000000
  "ChargeStopPercentage" = DWORD: 00000000
  "AutomaticMaintenance" = dword:00010020
  "MenuTextSize" = DWORD: 00000000
  "ShowBatteryGauge" = DWORD: 00000001
  "ShowRemainingTimeGauge" = DWORD: 00000000
  "MaxLenOfSchemeName" = dword:00000020
  "MaxLenOfSchemeHint" = dword:000000ff
  "MaxNumOfScheme" = dword:00000032
  "BRTNessGragualReduction" = DWORD: 00000000
  "BRTNessGradualReductionTimer" = dword:0000001e
  'BattDataPollingTimerGauge' = dword:0000003 c
  'BattDataPollingTimerWin' = dword:0000000 has
  "LoggedDataWritingTimer" = dword:00000708
  "BalloonStayTime" = dword:0000001e
  "RequiredMinimumLoggingTime" = dword:00000038
  "BattMessageURL"="http://www.lenovo.com/batteries."
  "BattMessageURL2"="http://www.lenovo.com/genuinebatteries."
  'BattMessageRemainingMin' = dword:0000005 has

  [HKEY_LOCAL_MACHINE\SOFTWARE\IBM\PWRMGR\Data\ExtremeBatteryLife]
  "FirstUse" = DWORD: 00000001
  "EnableTempSettings" = DWORD: 00000000
  "MinimizeDisplayBrightness" = DWORD: 00000001
  "TurnoffDisplay" = DWORD: 00000001
  "MinimizeRefreshRate" = DWORD: 00000001
  "DisableWirelessLanRadios" = DWORD: 00000001
  "DisableWirelessWanRadios" = DWORD: 00000001
  "DisableBluetooth" = DWORD: 00000001
  "UWBRadios" = DWORD: 00000001
  "DisableCDRW" = DWORD: 00000001
  "MuteAudio" = DWORD: 00000001
  "ShowBalloonMessage" = DWORD: 00000001
  "NeedBalloonMessage" = DWORD: 00000001

• need stop synchronization before finishing to avoid ipod classic remove

  I've updated to itunes version 12.5.1, as well as Windows 10.  If I let my ipod classic finish syncing, everything on the ipod is removed.  So I have to restore the ipod in disk mode so that itunes recognizes the ipod and avoid itunes gel settings.  I found the only way to keep my music is to stop synchronization before it ends or the entire contents of the ipod is removed, and I'll have to go through the process of restoring ipod to factory settings again.  During synchronization, I disable the Windows 10 firewall and anti virus as Apple support told me that it could interfere with itunes.  What is - this with the finishing of sync that removes my ipod?

  It's weird...  Hard drive it is possible to the iPod becomes unreliable and is damaged during the synchronization process.  What happens if you set it up to only synchronize a small number of songs, instead of "all"?  For example, on the settings screen of music from iPod in iTunes, rather than choose to synchronize the entire musical library, choose the option to synchronize playlists, artists, albums, and genres, and select only a SINGLE album.  These songs always get deleted at the end of synchronization?

• My i pod classic has no summer when option in I tunes 12.5

  My I pod classic has no summer when option in i tunes 12.5.  I want to manage my iPod

  Launch iTunes and connect the iPod.  The iPod is displayed as a button on the device, close to upper left corner of the iTunes window.  This screenshot of my iTunes appears iPod device button, circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side of this screen, in the sidebar, in setting, click the iTunes (like the music) media type to set up automatic synchronization for this type of media to iTunes.

  So if you are more familiar with the "tabs" to set up the iPod, who went in the upper part of the window of iTunes Plus, it works the same way, except that the features are now in the sidebar on the left side.

• Logic Pro vs Sierra-accidents

  I say to that I've only been live with Sierra for a few days so that the latter can get repaired soon (I hope), BUT now I get a whole bunch of accidents. After the initial load. Most of them seem to occur when the logic is trying to load some programs IE. Native Instruments and music of Air technology-Xpand.

  After a couple of accidents because she looking a few guitars of its wide who were not there, I found that there was an orphan prefs file, so once that was taken out of the picture, it worked but I always these accidents because of the OR & Air which I have not yet been resolved.

  Anyone having problems out there like that all advice?

  Welcome to the beta test of Logic-Pro team.  :-/

• all the songs are accidentally left organized files

  Hi all

  I moved accidentally all my songs out their records organized iTunes.

  The songs are all still in the music folder, but are now loose in there, and all of their files are empty.

  I find that all my songs are still playing very well, but just do not know if maybe I should get iTunes somehow to put them all back (?)

  Since then, I rebooted my Mac and reinstalled an .itl for her, so not looking is not a cancellation, but rather an organizing method that would not risk ruining his perfect current functionality.

  Any ideas on that?

  Thank you!

  I think probably the best thing to do would have to drag the iTunes folder automatically added to.

  iTunes 9: understanding the "Automatically add to iTunes" folder - http://support.apple.com/kb/HT3832 - files placed in this folder are actually moved from this folder to the correct location in the iTunes Media folder.

  Items already in the list of iTunes library do not appear a second time.

• IPod Classic 160g shows no music after synchronization.

  I tried reformatting and restoring. Sometimes I can get a few albums will appear on the ipod, mainly purchased itunes music. Almost none of my CD from my library will not work. It's maybe a hard disk problem. I just want to have some opinion or if someone could have the same question. It started after making the mistake of syncing with itunes after the last update. Forgive me for wanting to add new music. Here are my stats hard drive...

  Retracts: 9

  Reallocation: 16376

  Sectors pending: 0

  PowerOn hours: 143

  Start/stop: 47707

  Temp: current 29

  Temp: Min 5 c

  Temp: Max 56 c

  Do not know your stats, but it is not specifically a drive problem hard if your iTunes Store purchased songs to the iPod and your CD songs imported synchronization are not.  iTunes doesn't care of the original source when it syncs the songs.

  Do you use the method to Manage manual (drag and drop songs on iPod in iTunes) or Auto Sync (setting synchronization music )?  You get an error message after synchronization?

  Find one of the songs that will not sync to your iTunes library.  Make a right click on it and read the information.  Tab Info to file window, browse to the location.  It shows a file path to its location on your disk, or does it mean something else there, like iCloud.  Depending on the configuration of your iTunes, it is possible for you to access your songs streaming from Apple servers ("iCloud").  But to synchronize the songs on your iPod, your files must be stored locally on your disk.

  If this isn't the problem and/or your iPod hard drive is defective, you can consider to replace flash storage, in the form of widely available card compact flash or a card SDXC, on an adapter.  The 5th generation and later "classic" iPods, this website contains relevant information.

  https://www.iFlash.xyz/

• Classic i - pod, i-tunes not recognized not

  plugged the iPod on a Mac Classic.  Naturally, it erases all the music on the iPod. However, none of the music on the Mac was recorded on the ipod.  The monitor of playback for music stated, 'no music'.  Then, to make matters worse, when I plugged the ipod into my PC, it has not copied anything from the computer.  I went to devices on the drop of i-tunes, but the iPod does not appear as a device.  At one point, I got a warning to the effect that the iPod was corrupt.  I tried to reset by pressing the menu and select button, got the picture of the Apple, but still i-tunes does not recognize the device.  I tried this on another PC, that I have before at the end.  Same result. Both computers have the latest version of i-tunes.  On the page 'about' on the i - pod, I see that the version is 2.04PC, so I guess that the original software was for a PC and plug it into a Mac that messed up.  Can I load onto the ipod via the internet on PC?

  Naturally, it erases all the music on the iPod.

  Don't know what that means "naturally"...  If iPod was already associated with your Windows computer's iTunes library and you connected to your Mac, it shouldn't erase the iPod unless specifically can you tell iTunes Sync music library iTunes to Mac or do a restore (to erase the iPod).  Since that it has been deleted (probably with a restoration), after the restoration, the iPod uses the manually manage music and videos by default.  It still "synchronizes" but nothing is loaded onto the iPod.

  If you are planning that iTunes to automatically sync your music library on iPod, you assign to Sync music.  Find the iPod touch device in iTunes.  Here is a screenshot of the upper left corner of my window in iTunes, iPod button circled in red

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check the box to Sync music.

  NOTE: All of the songs on the iPod that are are not in your iTunes library (on computer) will be lost.

  This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits) or a part of the selection .  Set up this screen as desired, then click apply to sync.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

  NOTE: If your iPod is currently "corrupt", you will need to do a restore of the iPod in iTunes, before you can set it up to Sync music.  The restore button is on the settings of the iPod summary screen in iTunes.  Use any computer you plan to use with the iPod, to proceed to the restore.

  Can I load onto the ipod via the internet on PC?

  Embedded iPod software is the same, the only difference is how, the iPod's hard drive is formatted for Mac or Windows.  And do a restore on the iPod in iTunes, it's how the iPod software is reinstalled.

• Can I use the search feature to locate my ipod classic (stolen)?

  My ipod classic (I have the serial number) that I bought in 2007, was stolen from my room, Marriott Seattle Waterfront.  Can I use find it my ipod have a this old?

  N ° this feature works only with Apple iOS (iPhone, iPad and iPod touch) devices that have a direct connection to the Internet.

• I have a iPod Classic 30 GB. I have a new macbook pro and I managed to put my iPod, but now I can't synchronize my iTunes to iPod. What should I do next?

  iPod Classic does not sync with iTunes on MacBook Pro.

  If "reset" means you did a restore on it (to erase it), after the restoration, the iPod is set by default to use the parameter manually manage music and videos] .  If you expect not to sync automatically, you need to Sync music.

  Connect iPod and to find his button on the device to iTunes.  The screenshot below shows the left upper corner of the window of my iTunes, iPod button circled in red.

  

  Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side, in the sidebar, under settings, click on music.  Parameters of music from the iPod screen to the right.  Check the box to Sync music.

  NOTE: For anyone else reading this, all the songs of the iPod that are not in your iTunes library will be lost.

  This enables automatic synchronization.  You can choose to synchronize your entire music library or a part of the selection .  Implement this screen as you want, and then click apply to sync iPod.  Further, iTunes automatically keeps iPod "in phase" with the changes in your music library (or the selected part of it), when you connect the iPod (or click sync , if already connected).

  If this isn't the problem, thanks for posting back with additional details about your situation.