Mail 'Classic' split screen that went wrong

Similar Questions

• Update graphics card that went wrong; Need help.

  Let me first, I the a6700f desktop model.

  Here's my problem... There is a month that I bought a graphics card for my computer, the NVIDIA GeForce 8400GS 512 MB DDR2 PCI Express graphics card, link below:

  http://www.BestBuy.com/site/olspage.jsp?skuId=8990407&type=product&ID=1218007083381

  . It was great to work on my computer, and I liked the fact that I can play higher quality video and games on my computer, which could barely handle with the 6150 it comes with. It worked fine for about 2 days, when my friend told me that he had the 8600 model given to him by his cousin, but because it was a PCI Express model, it has failed on its motherboard. So he let me try, because it was the card I have established originally to get (but the Best Buy had not).

  I pulled the 8400 which worked very well and replaced it with the 8600. When I turned on the computer later, the monitor never displays anything. I could hear the music start and everything, so I know that it was running; However, the monitor shows nothing. So I turned off has released the 8600 and then tried the 8400. Even if it was working fine before trying the 8600, the monitor wouldn't read something with her. I thought it would be the monitor that was just straight up, so I tried another. The same problem. I then looked online and saw some article talks about food that may be too low because the amount required for the 8600 was 300w, exactly what my computer. So, I went to Best Buy and bought a 450w power supply and tried with that. Still did not work. I thought it could be the graphics card, so I returned it and got the same exact model, just a new. Still did not work. I even reformatted my entire computer to the settings it had when I bought it, and nothing has worked. I tried to clean my computer, searching for scratches and haven't found anything.

  The only way that the monitor has worked has been without any graphics in it (just the 6150) he built). I've been turned off to repair, because I know in general how to solve small problems like that, even if I can't know all the technical terms for computers (I'm more a guy who recognizes the parts and what they do).

  If someone knows a solution that I have not yet tried, please let me know about it so I can give it a shot and no waste of money do repaired and it have to be a simple solution.

  ----

  Additional information:

  I bought this computer some time in February this year, so it is still fairly new. However, I don't have the receipt so that it doesn't matter where, so I don't think I'm able to do anything with the warranty on it. I have also heard people that they do not cover damage of upgrades (don't know if it of true or not). Is there a way I can still make them fix it, or just get it replaced?

  Message edited by Luckybucket on 01/06/2009 19:42

  The pci-e slot is damaged and I suspect that this has been done when you were installing the 8600. It is not too difficult for the location on the motherboard with static damage physically or a force applied the wrong angle. HP will simply not provide a warranty if you have haveis a computer that cannot be used with the integrated graphics card or maybe (shudder) a simple pci card video.

• Import from a. PSD file that went wrong

  Hello

  In Photoshop, I've added a few new 17 image layers, then I copied (from an existing layer of the image) and glued the layer style in the layers of the newly added image.  Everything went very well in Photoshop.  All images appear correctly with the style to layer correctly in place, which means that the shadows appear correctly.

  In any case, once I import the. The new image in Flash CS4 PSD layers are darker shadows (100% instead of 50/75% opacity)

  Any ideas?

  Kind regards

  Ronald

  Hello

  I suggest you use the classic method... import each as a transparent PNG.

  You will have no problem.

  Trust me.

  RanTen

• Windows Mail v 6.0.600016386 went wrong after installing updates and IE 9.

  I use windows Mail comes with windows vista. (Not the Windows live, nor outlook.)

  After you install the updates and IE 9 on last week, I noticed that windows mail does not work properly.

  1. the police in the area "to: subject" above the display of message board is messed up. It seems to be bold and look aweful.

  2. the same "of: topic" should display the attachment 'trombone' and if I click on the attachment trombone, he used to give me the option to download it or open it. Now 'trombone' disappeared. Only way to download the attachment is to open the message and drag and drop it on the desktop.

  Does anyone else have this problem? How should I do?

  Thanks for any info

  Sean

  It is a known problem in WinMail introduced with IE9.  Workarounds is in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-font-problems-after-installing-ie9/a4274c96-d44f-e011-8dfc-68b599b31bf5?page=1

  There is no solution and its unlikely there will be one, because the reputation of Microsoft in fixing bugs of WinMail is catastrophic.

  Steve

• Windows7 upgrade that went wrong

  Hello

  My son got a machine running vista and it has upgraded to Windows7 with a free upgrade, which he received at the University that he attended.  It was received at the campus bookstore, so it should have been a legal copy.  We now have this machine at home and he says that the software is not authentic (lower right corner of the screen).  I had a few problems with trying to download updates, etc, and I need to fix this problem.  I see two options:

  1 somehow get this valid therefore it works like authentic software.  How can I do this?  I tried to do it online already, but it's Microsoft want to sell me a copy of Windows7.  I don't want to spend more money on this machine, so I'm not interested.  But assuming that my son has received a valid copy of Windows7 to its campus bookstore, I should be able to make it work somehow.  Any ideas?

  2 go back to Vista.  I think that the copy of Vista system restore is still on this machine.  How can I access that and put the system back to how it was before the update Windows7 was made?

  Thank you very much!!!

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone and waiting for someone to help you with activation.

  Also:
  Windows Activation video
  http://www.Microsoft.com/showcase/en/us/details/c09aefc0-1986-4C2F-Bad4-67487854f13f
  This video will show you: - how to enable Windows - where to find your product key
  How to use your product key - how to get support for the product activation

  How to activate Windows 7 by phone
  http://support.Microsoft.com/default.aspx/KB/950929/en=us
  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Product Activation Solution Center
  http://support.Microsoft.com/contactus/cu_sc_prodact_master

  Windows 7 activation error: invalid product key
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-invalid-product-key

  Stuck key (error 0xC004C4A2):
  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285

  Windows 7 activation error: 0xC004F061
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004F061
  "If the error"0xC004F061"when you try to activate Windows 7,
  This means that you are using a product key for a Windows 7 upgrade version and
  a previous version of Windows wasn't on your computer when Windows 7 was installed. »

  How to fix Volume Windows 7 Activation error codes
  Computers Windows Vista and Windows Server 2008.
  Includes a list of the different error of activation codes (for example 0xC004F009) and solutions.
  http://support.Microsoft.com/kb/938450

  Microsoft Genuine Advantage Diagnostic tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results here or in the forum: http://social.microsoft.com/Forums/en-US/genuinewindows7/threads

  --------------------------------------------- Uninstall Windows 7 ------------------------------------------------

  How to uninstall Windows 7:
  http://support.Microsoft.com/default.aspx/KB/971762

  How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder:
  http://support.Microsoft.com/kb/971760

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to fix a system restore that went wrong? Service Pack 2 error?

  Hello

  I tried recently to solve a problem with my monitor and used the system restore to do. It has fixed the problem, until the next day.

  Second day, I decided to try to use the restore of the system again, but this time I went back about a month to restore (just before I installed my video card drivers). I didn't know at the time where you're not supposed to do that (or so I've been told since). I don't have a problem with my monitor, but everything else is broken. I have no sound, no webcam and no USB port - to name a few. The problem is that Windows cannot upgrade to Service Pack 2. I tried using Windows Update and download SP2 from the Web site and manually install, nothing done. Someone has an idea, what happens? I'm not very computer savy, unfortunately. Thanks for any help you can offer.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  FREE support for your installation of Vista SP2 on the link above of Microsoft problems.

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 update for the week of 06/09/2015 - that went wrong

  After the installation of 17 updates

  10 security

  6 win 7 x 64 and

  1 malware

  The icons of my wallpaper and the Office disappeared.  It has been replaced by a gray screen with 5 icons of base.  I saw a message of information relative to: connect to the files your doc and fav?

  I restored the machine to an earlier date to eliminate all of the updates.

  I don't know what to think except this set of updates have gone bad...

  Are that Win 7 is responsible for updating this, should I remove the updates of the victory and just install the other 11?

  TerO

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Management concept the exceptions that went wrong!

  Well, this is by far the most embarrassing hack code I've done so far... but it works. I'm trying to run a select where if there is no data or null returned, place it in the value "v_pidm"and then let the action happen.» Pretty simple, right? Fake! A select statement returns no data that uses a function 'en' is an exception... "no data found". Oracle, it sends to the exception block as it should. Well, I don't want to stop and start my script a million times here, I added a Begin/End sub, with an exception to handle the error to say and perform an insert. I know that you should not use a State of exception for inserts another capture errors... you know bad practices and all. Any ideas as how to better manage the select statement that must regularly return no data? I was thinking some along the line of nvl (v_pidm, 0) or something, but I get errors.
  

  set serveroutput ON SIZE 1000000
  set heading off                
  set feedback off                
  set trimspool off               
  set echo off                    
  set pagesize 0  
  set termout on
  
  
  Declare
  error     varchar(255); 
  v_pidm    number(8); 
  
   Begin
      Begin    
          select distinct saraatt_pidm  
  
          into
  
          v_pidm
  
          from saraatt, saradap
          where saraatt_appl_no = SARADAP_APPL_NO
          and saraatt_term_code = SARADAP_TERM_CODE_ENTRY
          and saraatt_pidm = 4;
          
        Exception
           when too_many_rows then
          error := SQLERRM;        
          DBMS_OUTPUT.PUT_LINE(' %% Oracle Error! %% The select statement returned more than two rows ');
             
          when no_data_found then
          error := SQLERRM;        
          DBMS_OUTPUT.PUT_LINE('Select Returned No Data . . . Therefore Insert new record for ' || v_pidm );
          
          v_pidm := -999;
  
          when others then
          error := SQLERRM;        
          DBMS_OUTPUT.PUT_LINE(' %% Oracle Error! %% An Error Occured ' || substr(error,5,20));    
      End;
      
      
      
   DBMS_OUTPUT.PUT_LINE('Pidm: ' || v_pidm);
  
   End;

  There is nothing inherently wrong with code like

  BEGIN
    SELECT column_name
      INTO l_variable_name
      FROM table_name
     WHERE some_where_clause;
  EXCEPTION
    WHEN no_data_found
    THEN
      l_variable_name := 0;
  END;
  

  It is perfectly reasonable to have exception handlers that make anything other than newspaper an exception if they can in fact wisely handle the exception (e.g., you know that the query may return 0 rows and you know how to handle this case correctly).

  You don't want an exception handler that simply calls to DBMS_OUTPUT. Put_line without re-raise the exception. It is a mistake to delay. And there is no real reason in this case to extract the SQLERRM in the variable error - it would be better to let the exception is propagated to the top so that you can see the full error stack.

  Justin

• laptop battery that went wrong?

  I have a laptop Pavilion dv7. It is 18 months old and the (640 GB) HDD crashed. I tokk it to local repair shop and they succeeded him and was told that it was the battery that caused his failure. The battery worked fine for me, but I never noticed anything unusual. My question is the battery maybe the cause of this malfunctio or did just sold me a battery in addition to the hard drive.

  This means that all resolve itself?

• Drive setup that went wrong

  Just got a second hand optiplex 980 i3, fitted with a single hard drive installed win 7 everything works fine, but just came to mount a second drive and have just realized l had not checked the parameters of raid bios when l first installation of windows, and the raid has been set to raid1. When I installed the second drive, he just trying to rebuild the mirror. If I disable this disk is not booting from raid can I recover what I don't want a raid configuration.

  Remove the RAID before disconnecting the 2nd disc.  If you log out after completing the mirror, you will have 2 drives in RAID, and the two must have their codes of rewritten starting.  The other problem you might have is stated in my first post.  At least some Dell machines insist on having 2 eligible disks attached so that the CTRL-i option to be enabled.  If you are looking for the CTRL-i option with a single installed drive, you will never see because is not still pop up.

• Upgrade of blackBerry Smartphones that went wrong!

  Hello

  I am a new customer of blackberry and a bit of a techno * beep *.

  When I bought the phone, the clerk informed me that the softwear needed to be upgraded. I did it through the blackberry Desktop Manager. I first supported all the info on the phone to my computer.

  However, when the phone has restarted everything was gone. I was able to restore the contacts but had lost blackberry maps and the versions of blackberry of word and excel. I really want to the back. Please could someone tell me how to proceed?

  They do not appear here but when I ask him to add told me that they are corrupt and cannot be added.

• Hard drive transfer that went wrong.

  I copied all my pictures folders from a disk of 3 TB to 5 TB, but did not use LR. I then imported all the photos of the 5 TB in LR. Of course, all my changes are gone. What can I do? Still, I have the 3 TB and these changes but want to use 5 TB disk, go ahead. Help?

  Remember that Lightroom is designed as a single user, single computer management system.

  If you want to share of ALL changes to a picture, you need to "export catalogue" so that the user can ' import the catalog. Or otherwise share your catalog with him at a time when you are not running Lightroom.

• Paste of simple text that went wrong

  I have a text field with the text, all I want to do is replace it with a new text, so I select, right click and choose "Paste." But instead of pasting the text into the text previously placed field, a new is made, with the text as if it were an image.

  Here is a screenshot:

  

  Nope, it's the InDesign toolbar. I think that I found a post at InDesignSecrets that solves this problem: php http://indesignsecrets.com/when-pasting-text-from-word-turns-it-into-an-image-in-indesign.

  Kameruiz, don't forget to check the comments too, as there are several possible solutions mentioned.

• vCenter U3 U5 2.5 upgrade that went wrong!

  Hello

  I just tried to do an upgrade to vCenter 2.5 U3 U5. The MS SQL database & I've just restored to the backup of the comic, I took before the upgrade.

  I took a vCenter backup before the upgrade using VCB & backupexec but I can't restore with backup exec.

  Any suggestions on what I can do? I'm unable to start the virtual Center service.

  Thanks in adance.

  Easiest would be to uninstall the new version of vCenter and install the version of vCenter that corresponds to your version of DB.  Everything is contained in the BD, so a relocation and pointing to the existing database you will get to the top.

• Colors of background that went wrong

  Hello

  I am a newbie in the Web design world and to have some adjustments with a site I'm doing for my husband: http://www.ephremdesigns.com .  I accidentally upgraded to our home/index page file tonight after working on some other things and now, I cannot understand what it is causing parts of the background color of the homepage to be gray.  All the colors of the background, I don't see in the code are on #000.

  Any help would be appreciated! (.. .and don't be surprised to find a code that's pretty bad in there!)

  Thank you

  A.E.

  Hello Hans,.

  #000 is black and #F00 is red as well as not to cause the unwanted gray.

  Line 188 of the http://www.ephremdesigns.com/SpryAssets/SpryMenuBarHorizontal.css

  contains

  . MenuBarSubmenuVisible #wrapper div {}

  background-color: #434343;

  }

  which is causing the unwanted background.