Classic Tween scaling issue

Similar Questions

• Classic Tween Points of Pivot replacement Issues

  Hi all

  I am trying to create an animation animate simple cutting using classic Tween in CC. The problem is that whenever I try to change the pivot of an object point (for example I move the pivot point of the arm from one character to the shoulder), interpolation is messed up and I find myself with arms flying out of the body. I'm fairly inexperienced with the help of anything but frame-by-frame to animate, so if anyone know what I should do to fix this problem I would be really grateful help. Thank you!

  You may have noticed an error in the output window indicating that the change in pivot points may cause unexpected behavior. You will need to find another way to get what you want. If you're animating for video, SWF, or AIR, place you in an AS3 FLA, then you can do what you want. It's just the SADF HTML5 with limitation.

• Error of classic Tween when you move the point of rotation

  Hello

  I created a character who is running with classic tweens.

  When I move the distant point from the center of rotation of a shape (in my case, the forms are legs and I would like to move the point of rotation to the basin so that the legs remain attached to the feet and body), animation between two keyframes will show the form or the other shutter upwards or downwards, not according to the planned trajectory. I hope this makes sense.

  Thank you in advance.

  This happens when the alignment point is different at the beginning and end of a Tween. You must keep the same.

• Classic Tween is bad conduct (sometimes)

  Everybody get random situations where a classic Tween does not work properly? As he slides a symbol up onstage when there should only be rotating?

  I have a symbol interpolation between frames 1, 5 and 9. The movement between 1 and 5 looks like much but from 5 to 9, he decides to go out of the ride where it should "snap" the frame 9 8.

  The registration point / anchor changed in the frame of 9?  Keyframes with alignment points placed improperly can cause problems like this.

  To move the anchor point, use the transform tool to select your symbol; Then click and drag the white circle... it should align with Center & edges.  Make sure that it is in the same place on all chassis.

• HTML5 Canvas - Motion or classic tweens?

  First time ever using Flash - except that now it's animate CC!  Recess.

  In my project, I'm targeting out HTML5 Canvas for some online advertising that I do.

  By most data autour, the motion tweens are superior to classic tweens (you also get the whole thing graphic with anchor points, acceleration, etc.).  However, when I add a motion tween, I get this message in my outings when I post:

  "The motion tweens are published in the form of animations frame by frame. Use Classic tweens where possible. »

  ... Does that mean exactly?  I get the concept of a frame by frame animation, but I don't see how that would produce an output of HTML5.  I checked the JS, and it seems pretty normal with respect to the EaselJS code that is created.

  I would like to know why I get this message and if I should worry about this!  Thank you.

  A simple classic Tween will export to be a single line of Javascript. The same way as a motion tween may export as a large number of positionnelles data, for each image. But, if you customized in a classic Tween acceleration, CreateJS has trouble with him, perhaps because he cannot easily be described in Javascript.

  Either use simple interpolation and simple relaxation, with a classic tween, or you knock out and make the movement you really want with a motion tween and don't worry too much about the additional file size.

• Problems with classic Tween to alpha setting

  I feel really stupid, because I've done this before, but I'm having a helluva time fading graphics using the classic Tween Alpha settings.

  I add managers to set the range, import the image of the scene, convert to symbol, then insert keyframes where I want to go from 0 to 100% and 100% to zero.

  In general, what happens is one side works and the other is not using the same steps. So he jumps and fades out or vice versa. SOOOOO frustrating!

  I have searched the forum and looked at several tutorials and have not found an answer.

  Could someone Please post a simple step - by - step directions to do this in Flash CC?

  1. create the object or drag the object on the stage of the first image.

  2. Select this object to make a clip or another type of symbol object.

  3. move to another frame in the same layer, say 15 framework more away and create a second keyframe.

  4. move again and create a third keyframe.

  5. go on the first keyframe and do a right click, select Create a classic Tween.

  6. go to the second image key and do the same thing.

  7. at the second keyframe, select the object on the stage and change the alpha value for this object.

  8 play.

• Classic Tween problem!

  So I did an animation frame by frame of a man waving and wanted to do a little smoother animation. So I highlighted all the frames and clicked on create a classic Tween. But then I get a warning saying "motion tween will not take place on layers with dissociated shapes or layers with more than one group or a symbol. Can someone help me with this? Or please tell me a way to make my image with smoother animations?

  https://www.YouTube.com/watch?v=cDqEfvJ3JMQ

  https://www.INKLING.com/read/how-cheat-Adobe-Flash-CS6-Georgenes-1st/chapter-4/motion-and-classic-tweens

  Note that once you create a symbol, you can change its contents by double-clicking it or by selecting "Edit in place in the Edit menu.

• Problem of animation classic tween/embedded Flash CS4

  Hello

  I'm working on a project that requires me to use Classic tweens, and I'm having a problem with embedded animations stored inside the symbols for the characters.

  Let's say that I have set up a really simple animation with three keyframes.  On the first image, I ask the character, and in the properties panel, in a loop, I choose ' reading single image "and select a form of mouth integrated frame 15, then to frame 12, I ask the new character and this time defined the shape of the mouth for" play single image and select picture 16 for the shape of the mouth. "  Then duplicate frame 1 to frame of 24 for my third keyframe.  So far so good.

  As soon as I apply a classic tween, however, frame 12 will be is no longer display the mouth shape stored in frame 16, but will apply the attributes of the first frame of the animation and use the shape of mouth integrated framework 15.  What is more, if I can remove the interpolation, it still doesn't let me change the options in a loop (from chassis unique to play only once, for example) or displayed included frame.  So, essentially, I'm stuck with the included frame, I put on the first image and cannot change it.  The only way to get around this seems to actually create keyframes individual without apply a Tween and try to match the movement of this form for the rest of the animation on an image by image basis.

  If anyone knows how to work around this problem, I'd like to hear it (and if it does not make sense at all, please let me know).  Thank you!

  Rob

  Just in case someone comes across this and has the same problem, I found the problem.  In the properties panel under interpolation (which is active when you have selected interpolation), there is a default checked box called 'Sync '.  Unchecking allow you to create a discreet Tween spans-by-side.

• What is the difference between the shape tween, classic Tween and motion tween

  What is the difference between the shape tween, classic Tween and motion tween

  Flash CS4 introduces the possibility to rotate and move objects on all 3 of the axis. (So the X which horizontally across the stage, the Z and Y that goes vertically along the stage going perpendicular to the scene, straight towards the viewer and off movement until the point.)

  A 3D interpolation is a motion tween where you rotate or move something on these lines.

  A standard classic Tween gives you only the ability to move and rotate along X and Y.

• Tween scaling... ?

  I am currently using the Tween class to interpolate my movieclips (just the basics like the x position, etc.).

  But I am distressed to tween scaleX and scaleY as interpolation does not seem to support the central focus of the movieclip.

  I want the movieclip to scale, and not only from left to right.

  Does anyone have a solution for my problem?

  
  Thank you for helping me with this!

  change the alignment of your movieclip.  the scale is always relative to the point of reg, regardless how you are scaling.

• TCP Window Scaling issues

  We have Cisco 2800 to each of our four locations that are managed by our ISP. We had problems with them, I got them to send me the configuration files of one of them, but nothing jumps out to me.

  You must disable TCP Window Scaling/tuning on all our Machines 7/Server Windows 2012 (by running netsh interface tcp set global autotuning = disabled in the command line)

  If we have not this is very slow to load even a Web page and cannot download a file (even something as small as 2 MB). Mobile devices have no hope to work on our network now because of this. This isn't a question on our XP remaning machines bit, but I think that XP did not use Window Scaling is the reason.

  Any ideas what could be causing this? I intend to replace it soon with our own routers, because they do not want to configure the secondary interfaces for our VLAN, but in the meantime I need this job.

  Thanks in advanced for any help.

  Here is the Config with Sensative information deleted

  version 12.3
  no service pad
  service tcp-keepalives-in
  service tcp-keepalives-out
  service timestamps debug datetime msec localtime show-timezone
  service timestamps log datetime msec localtime show-timezone
  service password-encryption
  service sequence-numbers
  !
  hostname REMOVED
  !
  boot-start-marker
  boot-end-marker
  !
  logging buffered 8192 debugging
  no logging console
  enable secret REMOVED
  !
  no aaa new-model
  !
  resource policy
  !
  mmi polling-interval 60
  no mmi auto-configure
  no mmi pvc
  mmi snmp-timeout 180
  ip subnet-zero
  ip cef
  !
  !
  no ip dhcp use vrf connected
  !
  ip inspect name DEFAULT100 cuseeme
  ip inspect name DEFAULT100 ftp
  ip inspect name DEFAULT100 h323
  ip inspect name DEFAULT100 icmp
  ip inspect name DEFAULT100 netshow
  ip inspect name DEFAULT100 rcmd
  ip inspect name DEFAULT100 realaudio
  ip inspect name DEFAULT100 rtsp
  ip inspect name DEFAULT100 esmtp
  ip inspect name DEFAULT100 sqlnet
  ip inspect name DEFAULT100 streamworks
  ip inspect name DEFAULT100 tftp
  ip inspect name DEFAULT100 tcp
  ip inspect name DEFAULT100 udp
  ip inspect name DEFAULT100 vdolive
  no ip ips deny-action ips-interface
  !
  no ftp-server write-enable
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  crypto pki trustpoint TP-self-signed-REMOVED
  enrollment selfsigned
  subject-name cn=IOS-Self-Signed-Certificate-REMOVED
  revocation-check none
  rsakeypair TP-self-signed-REMOVED
  !
  !
  crypto pki certificate chain TP-self-signed-REMOVED
  certificate self-signed 01
  REMOVED
  quit
  !
  class-map match-all VOIP
  match access-group 120
  !
  !
  policy-map VOIP
  class VOIP
  priority 1000
  class class-default
  !
  !
  !
  crypto isakmp policy 1
  encr 3des
  authentication pre-share
  group 2
  crypto isakmp key REMOVED address 0.0.0.0 0.0.0.0
  no crypto isakmp ccm
  !
  !
  crypto ipsec transform-set VPN esp-aes 256 esp-sha-hmac
  !
  crypto ipsec profile SDM_Profile1
  set transform-set VPN
  !
  crypto ipsec profile SDM_Profile2
  set transform-set VPN
  !
  !
  !
  !
  !
  interface Tunnel0
  description $FW_INSIDE$
  bandwidth 3000
  ip address 10.10.200.1 255.255.255.0
  ip access-group 101 in
  no ip redirects
  ip mtu 1400
  ip nhrp authentication VPN
  ip nhrp map multicast dynamic
  ip nhrp network-id 100000
  ip nhrp holdtime 360
  ip virtual-reassembly
  ip route-cache flow
  ip tcp adjust-mss 1360
  ip ospf network broadcast
  ip ospf priority 20
  delay 10
  tunnel source FastEthernet0/1
  tunnel mode gre multipoint
  tunnel key 100000
  tunnel protection ipsec profile SDM_Profile1
  !
  interface Null0
  no ip unreachables
  !
  interface Loopback0
  ip address 192.168.210.1 255.255.255.255
  no ip redirects
  no ip unreachables
  no ip proxy-arp
  ip route-cache flow
  !
  interface FastEthernet0/0
  description $FW_INSIDE$
  ip address 10.10.100.1 255.255.255.0
  ip access-group 100 in
  no ip redirects
  no ip unreachables
  no ip proxy-arp
  ip nat inside
  ip virtual-reassembly
  ip route-cache flow
  ip policy route-map server-nat
  duplex auto
  speed auto
  no mop enabled
  service-policy output VOIP
  !
  interface FastEthernet0/1
  description $FW_OUTSIDE$
  ip address IP REMOVED NETMASK REMOVED
  ip access-group 102 in
  ip verify unicast reverse-path
  no ip redirects
  no ip unreachables
  no ip proxy-arp
  ip nat outside
  ip inspect DEFAULT100 out
  ip virtual-reassembly
  ip route-cache flow
  load-interval 30
  duplex auto
  speed auto
  no mop enabled
  !
  interface FastEthernet0/1/0
  load-interval 30
  !
  interface FastEthernet0/1/1
  !
  interface FastEthernet0/1/2
  !
  interface FastEthernet0/1/3
  !
  router ospf 100
  log-adjacency-changes
  passive-interface FastEthernet0/0
  passive-interface FastEthernet0/1
  passive-interface FastEthernet0/1/0
  network 10.10.100.0 0.0.0.255 area 0
  network 10.10.200.0 0.0.0.255 area 0
  network 10.10.201.0 0.0.0.255 area 0
  network 192.168.210.1 0.0.0.0 area 0
  !
  ip classless
  ip route 0.0.0.0 0.0.0.0 REMOVED
  ip route REMOVED NETMASK REMOVED
  ip route REMOVED NETMASK REMOVED
  ip route REMOVED NETMASK REMOVED
  !
  ip flow-capture ip-id
  ip flow-capture mac-addresses
  ip flow-top-talkers
  top 10
  sort-by bytes
  cache-timeout 30000
  !
  ip http server
  ip http authentication local
  ip http secure-server
  ip nat pool nat REMOVED netmask REMOVED
  ip nat inside source list 150 interface FastEthernet0/1 overload
  !
  access-list 100 deny   ip 10.10.200.0 0.0.0.255 any
  access-list 100 deny   ip host 255.255.255.255 any
  access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
  access-list 100 permit ip any any
  access-list 100 deny   ip 10.10.201.0 0.0.0.255 any
  access-list 101 remark Tunnel ACL
  access-list 101 deny   ip REMOVED 0.0.0.7 any log
  access-list 101 deny   ip host 255.255.255.255 any log
  access-list 101 deny   ip 127.0.0.0 0.255.255.255 any log
  access-list 101 permit ip 10.10.100.0 0.0.0.255 10.10.110.0 0.0.0.255 log
  access-list 101 permit ip 10.10.100.0 0.0.0.255 10.10.120.0 0.0.0.255 log
  access-list 101 permit ip 10.10.100.0 0.0.0.255 10.10.130.0 0.0.0.255 log
  access-list 101 permit ip host 10.10.100.10 any log
  access-list 101 permit ip host 10.10.100.12 any log
  access-list 101 permit ip host 10.10.100.20 any log
  access-list 101 permit ip host 10.10.100.21 any log
  access-list 101 permit ip host 10.10.100.45 any log
  access-list 101 permit ip any host 10.10.100.10 log
  access-list 101 permit ip any host 10.10.100.12 log
  access-list 101 permit ip any host 10.10.100.20 log
  access-list 101 permit ip any host 10.10.100.21 log
  access-list 101 permit ip any host 10.10.100.45 log
  access-list 101 permit ospf any any
  access-list 101 permit icmp any any
  access-list 101 deny   ip 10.10.100.0 0.0.0.255 any log
  access-list 101 permit ip 10.10.110.0 0.0.0.255 10.10.100.0 0.0.0.255
  access-list 101 permit ip 10.10.120.0 0.0.0.255 10.10.100.0 0.0.0.255
  access-list 101 permit ip 10.10.130.0 0.0.0.255 10.10.100.0 0.0.0.255
  access-list 102 remark Outside ACL
  access-list 102 permit tcp host REMOVED host REMOVED eq 22
  access-list 102 permit tcp REMOVED 0.0.0.15 host REMOVED eq 22
  access-list 102 permit udp any host REMOVED eq non500-isakmp
  access-list 102 permit udp any host REMOVED eq isakmp
  access-list 102 permit esp any host REMOVED
  access-list 102 permit ahp any host REMOVED
  access-list 102 permit gre any host REMOVED
  access-list 102 permit icmp any host REMOVED echo-reply
  access-list 102 permit icmp any host REMOVED time-exceeded
  access-list 102 permit icmp any host REMOVED unreachable
  access-list 102 permit ip any host 10.10.100.10
  access-list 102 permit ip any host 10.10.100.12
  access-list 102 permit ip any host 10.10.100.20
  access-list 102 permit ip any host 10.10.100.21
  access-list 102 permit ip any host 10.10.100.45
  access-list 102 deny   ip 10.10.100.0 0.0.0.255 any
  access-list 102 deny   ip 10.10.200.0 0.0.0.255 any
  access-list 102 deny   ip 10.0.0.0 0.255.255.255 any
  access-list 102 deny   ip 172.16.0.0 0.15.255.255 any
  access-list 102 deny   ip 192.168.0.0 0.0.255.255 any
  access-list 102 deny   ip 127.0.0.0 0.255.255.255 any
  access-list 102 deny   ip host 255.255.255.255 any
  access-list 102 deny   ip host 0.0.0.0 any
  access-list 103 permit ip REMOVED 0.0.0.15 any
  access-list 103 permit ip 10.10.200.0 0.0.0.255 any
  access-list 103 permit ip 10.10.100.0 0.0.0.255 any
  access-list 103 permit ip 10.10.110.0 0.0.0.255 any
  access-list 103 permit ip 10.10.120.0 0.0.0.255 any
  access-list 103 permit ip 10.10.130.0 0.0.0.255 any
  access-list 110 deny   ip host 10.10.100.12 10.10.110.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.12 10.10.130.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.10 10.10.110.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.10 10.10.130.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.20 10.10.110.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.20 10.10.130.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.21 10.10.110.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.21 10.10.130.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.45 10.10.110.0 0.0.0.255
  access-list 110 deny   ip host 10.10.100.45 10.10.130.0 0.0.0.255
  access-list 110 permit ip host 10.10.100.12 any
  access-list 110 permit ip host 10.10.100.10 any
  access-list 110 permit ip host 10.10.100.20 any
  access-list 110 permit ip host 10.10.100.21 any
  access-list 110 permit ip host 10.10.100.45 any
  access-list 120 permit udp any any eq 5060
  access-list 150 deny   ip host 10.10.100.10 any
  access-list 150 deny   ip host 10.10.100.12 any
  access-list 150 deny   tcp host 10.10.100.20 any eq 3389
  access-list 150 deny   ip host 10.10.100.21 any
  access-list 150 deny   tcp host 10.10.100.45 any eq 22
  access-list 150 deny   tcp host 10.10.100.45 any eq 443
  access-list 150 deny   udp host 10.10.100.45 any eq 5060
  access-list 150 deny   udp host 10.10.100.45 any range 10000 10500
  access-list 150 deny   ip 10.10.110.0 0.0.0.255 any
  access-list 150 deny   ip 10.10.120.0 0.0.0.255 any
  access-list 150 deny   ip 10.10.130.0 0.0.0.255 any
  access-list 150 permit ip 10.10.100.0 0.0.0.255 any
  !
  route-map server-nat permit 10
  match ip address 110
  set ip next-hop 10.10.200.3
  !
  !
  !
  !
  control-plane
  !
  !
  !
  !
  !
  !
  !
  !
  banner motd ^CC
  <@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@>
  Authorized access only
  <@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@>
  Disconnect IMEDIATELY if you are not an authorized user !
  ^C
  !
  line con 0
  login local
  transport output telnet
  line aux 0
  login local
  transport output telnet
  line vty 0 4
  access-class 103 in
  privilege level 15
  login local
  transport input ssh
  line vty 5 15
  access-class 103 in
  privilege level 15
  login local
  transport input ssh
  !
  end
  

  Hello Jason,

  you will find articles from may saying that MS AutoFix feature does not work well with some firewall stateful inspection and/or VPN.

  At CSC, I found another interesting:

  https://supportforums.Cisco.com/thread/2169557

  Maybe Joseph joins this discussion later with some new or additional information.

  Best regards

  Rolf

• Display blur T460 and scaling issues

  Hello

  I have a laptop T460 with IPS FHD (1920 x 1080) screen that has windows preinstalled 10. If I change the lower resolution then 1920 x 1080, the screen becomes completely blurred. I also meet questions scale, as it has been set to 150% by default, the problem is that some applications are blurred. The solution I found so far to fix it must check the box 'Turn off display settings high ppp phasing', but which makes fonts,... just too small, making it very unpleasant to work with application

  Change the scale to 100% fixed everything, but makes too little

  I wonder if anyone other use screen tesame meets these questions and what your solution to this?

  
  

• Scaling issue of CC 2014 UI Illustrator

  Hello. Why the new Adobe Illustrator CC (2014) show the box tools and tool for the larger on the screen. I have two software install in my computer

  Look for differences between the screen:

  

  Thanks for the help if you know the problem.

  MHCDESIGN

  Hello

  AICC 17.1 and especially now supports monitors HiDPI so the scale of the user interface is now based on the operating system display settings. You can check Control Panel > appearance and personalization > display and change text size to show more small if it is shown larger that you stated.

  Please let me know if it helps.

  Thank you

  Dhirendra

• Interpolation classic vs. motion tween

  Hello

  As someone new to the creation of banners of HTML5, I'm not sure what kind of interpolation should I use to make my web ads.

  I find much more pleasant to use for motion tweens, but Animate gives me a warning when I publish the file 'Motion tweens are published in the form of animations, image by image. Use Classic tweens where possible. »

  I found various tutorials which are of the opinion that the motion tweens are better and should be used preferably classic tweens, but what is missing for me is why one is better or worse than the other.

  What is a motion tween creates a larger load of CPU to run all "frame by frame" animation and classic Tween is not?

  Can someone please clear this up for me.

  Thank you

  Animation of scenario gets transformed in CreateJS Javascript. If you are creating tweens, you can see how it ends up looking. For a simple classic tween, it's a short line. For a custom ease classic tween, or a motion tween, animation of the same search takes a lot of lines. Basically, the length of the simple classic Tween multiplied by the number of frames in the animation.

  There are also many commands wait (1) consecutive, which can lead to poor performance.

• strange symbol scaling, when the value of key in a Tween

  Hello
  I'm doing a character for a game project animation.
  The developer would like the symbols I animate to be scale 100%, but I'm running into a problem where the symbol can evolve into ~99.9% and don't allow themselves to be handed over to 100%.

  That's what's happening (ah, sorry about the strange pictures - click to see the clean versions life-size):

  

  first series of keyframes

  -------------------------------------

  

  second set of keyframe - a rotation on it value

  
  -------------------------------------

  

  created classic Tween

  -------------------------------------

  

  picture key defined in the tween - strange scale value

  -------------------------------------

  
  Now the strange thing (for me at least) is that, once the scale ~ 99% was assigned to the coast I'm not able to change it to 100% in the transformation Panel (be it by resetting the scale or by manually entering 100%).  He'll temporarily read as if it was at the 100% level, but when I rub away and then come back to this key frame - it's 99% again.

  The only solution I found is to transform remove them and then replace the symbol to its previous position. Then, there is the same position and 100% scale. I guess I'll have to do this if necessary but... is there a better way?  (with any luck, the solution will be so simple and obvious that I'll feel stupid )

  
  (for anyone interested: the reason why I animate as is it seems to be a nice way to get quickly to the poses of ventilation (a pose that contributes to the animation move between large poses) - I'll do two great poses and create a motion tween classic that link.)  I'll keyframes to a point along the interpolation, delete tweens and keyframes modify them to create my ventilation.  If someone has a better method to do, I'd love to hear it too)

  Thank you!

  -Ross

  usually from rounding errors and/or interpolation.  Flash place objects by pixel de.05 the closest and interpolation of the timeline is a situation better guess with flash try to calculate what you want.