Clean Conversion of Fusion vs Parallels VM install

Similar Questions

• Fusion and Parallels on the same computer?

  A few months ago, I went from Fuiosn 3.0 to Parallels 5 mainly to see if Parallels would be faster on my iMac (it was).  I like parallel, but all-in-all, I liked the Fusion experience, better, I used a little unity and Fusion felt less intrusive on Mac.  So finally my question: is it possible to install Parallels and Fusion on the same machine, without a lot of interference between them, since they have both fact their integration with MAC OS X.  I do not really want to run them at the same time, but just have both installed, so I can try one and then the other.  I'm guessing it's something stupid and prone to problems, but I wanted to see if anyone else had tried, and what has been their experience.

  I tried to search but the only things I found were in 2007 and 2008.

  I have two Parallels and VMware Fusion installed on my MacBook Pro and have no problem having both installed at the same time however I have not run them at the same time, neither do I.

• Satellite L670 - 134 PSK3EE: no clean button WLan FN + F8 after Win7 install

  Hello

  I have reinstalled a 'clean' Windows 7 Home Premium 64-bit and installed all the drivers that I need (I think: P)

  Value Added Package
  Turbo Boost technology
  Wireless Lan driver
  Bluetooth monitor
  Card reader controller
  Chip Set Utility
  Display driver
  Flash Cards Support utility
  Intel Management Engine Interface
  Touch Pad Driver
  LAN driver
  Audio driver

  If all the works of FN Key´s but no WiFi on / off

  I hope someone can help me with my problem :) and sorry for my bad English

  Hi mate

  So you mean all other FN keys work correctly, but only the FN + F8 key combination does not work as it should?

  This means that you can not activate WLan I would recommend setting the BIOS to the default settings and reinstall the WLan driver again
  The fact is that if the WLan driver would not work or if the WLan card is not installed properly, then the FN + F8 key combination does not work too.

  Update the driver WLan using this page:
  http://APS2.toshiba-tro.de/WLAN/

  Good luck

• 7, OSX 10.10 fusion Host, used to install OSX 10 VM

  Running out official OS x 10.10 host yesterday, Fusion 7.0.0, but the InstallESD.DMG extract does not start, he'll just in VMware EFI menu.

  Not a good start.

  Dumb. Had to choose "Install OS X Yosemite.app" as the source and let vmware automatically create the media about him. manually extracting the dmg file doesn't seem to work, he has with all other versions.

• The ALX files: Conversion Area51 ALX, STRANGE front engine install

  11.1.14 edit: I posted a more important here How - to's to drop the engine in A-51 standard:

  • More TOP TOP SECRET: Uncovering Area-51 of the largest (& best kept) Secret of all the
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19604330/20691464#20691464

  

  -Original message-

  "Cloning the ALX Alien." My new Area-51 is due for a snack; here in my toolbox, I thought I'd try the motorization of the front panel to make it more ALX - ish. It is to disassemble the front panel, the strange motor mounting and installing the correct master i/o daughter card to power the motor. I call this one: operation Changeling. The new strange engine & Master i/o board arrived today, & updates will appear after foreign success *. Panel before motorized or bust...

  

  If your mio Board is missing upper left (son red/black, 4-pin) connector for the odd_motor, then you will need get a hint of mio ALX, who does not have the odd_motor connector

  

  

  **********************************

  Change 11.25.14

  

  Today my pair of 'parts' ALX panels arrived @ a killer case: 32 dolla / shipped for both. Manufacturer x504r. No, they were not easy to find, (no, they are not for sale either, lol). After seeing that I got to work, what I have in mind here is to make 'a good thing' to simply remove the top panel scratched each, & transferring the good top panel of the other as a spare part solid with or without problems to my ALX. Then, I'll remove the engine-Ribbon-switch, etc. from the 'bad', retained as a spare & recycle the damaged hull, that is not worth keeping.

  I present to you the photo & update here as proof that they are, I ran down to three in the last 6 weeks. Basically, carpet bomb anyone who sells parts w/a message from A - 51 if they have a known-working ALX panel for sale. Is they say yes, but it's just a little beat up - scratches / bumps - don't mention you're just motor & could care less what he "looks like to ': use some cosmetic problems there as leverage to get the price down. You could say: "it does make a lot of sense for me to replace my Panel ALX (lol, as if) w / one who has problems, but @ the right price, I'd be willing to give it a go; maybe try to make 'a good thing' of mine & yours... ok? If all goes well a stealth maneuver like this is help to bag one at a large or even crazy price. 1 I put in bag came from a guy just a motherboard stock selling: I messaged, asked if the case it came with was there with him, & if so if it could be separated outside too, so there's have it. You will need a good new alx master i/o board also, three different part #, everything will work in your A-51 stndrd & here, I tried to do a master i/o Board removal / replace guide in the middle of this post:

  • FWKNT v1.01 / CR1KN V1.01 / 604GC v2.0
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19523732

  I know it's rare, but sometimes you will see just the engine coming up for buying: If so, grab you it & as you see the weld in your own micro-switch, as a viable option. Other times, you'll see the available engine + Ribbon + switch: in this scenario, you might stumble it all-in- & if so, take note of how your Ribbon of old stndrd routes etc. can transfer the alx engine-Ribbon-switch on (if your snippets of 'transparent tape' that fix the Ribbon junk up in the process, you can buy clear "reinforced nylon of" sticky tape of CVS etc. to the new band on.) If you buy a full panel, maybe save your parts & throw the rest...

• Can you please provide me with the fresh Fusion Mobile APP to install and test script document?

  Can you please provide me with the document merging Mobile APP cost installation nd test script?

  You should ask this on the forum of merger App.

  Their application is on the public folder store before you can from there:

  https://iTunes.Apple.com/us/app/Oracle-Fusion-expenses/id516172076?Mt=8

• I had to clean my computer & now want to re - install Photoshop, but I can't find the serial number, so don't let me download the program. What are my options if I can't find the number?

  Hello... I had to clean my computer, & would like to reinstall photo-shop. I bought several months ago and can not find where I put the serial number, so I can not download the program. If I can't find what are my options?... Thank you!  :-)

  Your subscription to cloud or serial number to show on your account page?

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

  If the link above does not help you, and you haven't written your serial number on paper to store in your office, I don't know any way to help

• When I turn the Windows computer does not stop. I used hive cleaning. but does not work. have re installed several times,

  the computer I have I have a h.p. it ued wa when I got it. When I turn it on. a notice comes up saying that the driver installation is complete.  I have not laod a driver.  I'm not terms computer litterate.please profane EU. Thank you

  Hi johnbrandon,
   
  -What happens when you try to shut down the computer? You receive an error message or error code? If Yes, indicate the same.
   
  -Have you been able to shut down the computer without any problem earlier?
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
   

  You can unplug the connected external devices, as appropriate and check if the problem is resolved.

  Here are some links that you might find useful. Try the methods listed in the following items and check, if this can help you in the matter of fixing:

  Your computer stops responding when you try to shut down in Windows XP

  Computer does not close properly if selective suspension is enabled

• Switched back to Fusion. Impossible to remove the icons from Parallels

  This is a repost. I was probably not word the subject well enough on the first post

  I use the Fusion user for 4 years now, but in order to satisfy my curiosity I looked into Parallels 8 to see what differences there are between it and the Fusion.

  Because I assumed two virtual machine programs work would present a problem I uninstalled Fusion and installed Parallels 8. Uninstallation of the merger was without incident, as the installation of Parallels 8. After using it for about two weeks, I decided that I would stay with Fusion since Parallels did give any real advantage in a world of Boot Camp.

  I followed the instructions for the elimination of Parallels in the side Mac and the tools of the side Windows. I then reinstalled merger. Everything was back to where it was before my tests, or so it seemed.

  I discovered some latency in the boot process, as well as garbage on the screen (at the start of Windows) that wasn't there before that I did my unfortunate test. I then dug deeper into the side Mac and searched all Parallels and found a lot of stray files that uninstalling seemed to have ignored or missed, ranging from the plists at hidden in the library folders. I carefully deleted only files that have been clearly identified as 'Parallels' files and folders. I tested the program VMWare Fusion and everything seems to work fine, but I've always had this nagging suspicion that everything was not as "clean" as it was before the test.

  Yesterday, I finally got fed up with the slow start of Windows 7 Pro and decided to look in the Windows registry. Boy, was I in for a surprise. There were more than 600 entries from channels that Parallels creeps in and through the Windows registry. Fortunately I am versed in regedit and quickly cleaned up the filth of Parallels. My MBP seems to boot properly.

  I'm having a small problem on Mac side that maybe you can help solve. In my taskbar, there is the BootCamp/VMware arrow. If I click on it, a drop down menu appears with the Parallels icon (see image)

  I can't, for the life of find me the file or the folder associated with this 'Parallels Desktop (Mac)"listed program. Behind the drop down menu is a list of all files that have the exact string "Parallels Desktop (Mac)" included in it. And now my question.

  What can I delete or change to rid myself of this icon and the list?

  For the record, I'm on a MBP (late 2008) 8 GB of RAM and using Boot Camp on an NTFS partition

  Click the Applications Menu Settings button under the drop-down list button in your screenshot.

  Click Clear Recent Applications.

• How to do a clean install of El Capitan on new ssd?

  I bought a new SSD to replace the SATA drive in my Macbook Pro for mid-2010. I am running Yosemite. What I want to do, is to do a clean install of El Capitan on the SSD. I also bought a pregnant and plan on the use of the old drive as an external backup.

  I need some advice: after installing the ssd in the MBP and the old drive in the box, I intend to plug the old drive for the MBP, format the SSD drive and then use a reader flash which I did the Setup file of El Capitan to a clean of El Capitan for the SSD install and then use the Migration Wizard to migrate applications and files from the old drive.

  Is there a better way? Maybe install the SSD in the enclosure first, connect to the MBP, then shaped and do cleaning installation of El Capitan?

  All advice is appreciated.

  installing the SSD in the pregnant first, connect to the MBP, then shaped and do clean install of El Capitan?

  It's better. Some of these Macs experience problems after surgery. The new installation using the outside doing will give you confidence that it works before surgery, and no problem introduced by surgery can be separated from issues of installation and update. It will install and run in an external, just may be a little slow.

• How to install drivers lost after complete cleaning and installation of xp?

  I was given a ze5170 Pavilion older to use as support for a system to work.  He has problems.  It has been completely wiped clean (HD) and had Windows XP Pro installed.  None of the quick work keys, volume up / down / mute are not displayed on the screen.

  I would like to re - install the drivers but can't seem to locate them as stand-alone dll or exe download.  HP Driver Detective does not load, error 'cannot initialize' so can not go this route.

  Clues as to where I can get independent drivers?

  Help would be greatly appreciated.

  Peetywondr

  Vidya,

  Thank you very much... all my functions are back and excellent operation.  I can't thank you enough.

  Any other reading of these "fixes", he is the one that has worked 100% for me.

  I can't get the link of "Congratulations" to work then KUDOS to you!

• What are good Options for installing Linux on a Mac?

  I have a Macbook Air in 2013 with a SSD 256 GB and 8 GB of memory. I have 80 GB free. I have Hyperacusis and had problems with a noisy computer a few years back, so wanted to avoid noisy readers.

  I need to be able to access my files from either OS X / Mac OS or Linux. This is the biggest problem. If I can't work on the same files in OS X / Mac OS and Linux, I can't really do much with Linux.

  I have trouble with some accessibility problems in OS x:

  1. I have sensory problems and need to disable more animation and more still of the blinking cursor. I used a hack to disable flashing cursors in some applications, but it does not work in LibreOffice, Pages, Mail, etc. It should work in Scrivener, and I plan to spend to Scrivener. He also works in bean and Textedit.

  2. I have problems of coordination/proprioception and could use the wider scroll bars. I currently use Scroll + scroll software, but it doesn't go anywhere. I could use a version of sticky keys, but the current version is not yet there. It shows the active keys on the screen, but I need to update t on the keyboard.

  I will need to avoid some problems of accessibility on Linux:

  1. I have sensory problems and you will need to disable the animation and flashing cursors. I need to be able to boot Linux with minimum brightness. I tried Kde always open in blinding brightness.

  2. I have problems of coordination/proprioception and need to disable the touchpad gestures and listen; This required a patch kernel in Ubuntu, which meant running a non - lts version, which meant not being not able to use the Ubuntu repositories after support missed. I need to be able to keep the visible scroll bars and expand their. Sometimes, I need to use a software of scrolling.

  One option is to use refined and a full install. It's intimidating. I'm done with installation of Xubuntu broke at some point because it crashed while it was installing. Another option is to use VMWare Fusion or Parallels or an equivalent Mac of Wubi.

  One of these options would allow me to access my files from Linux? Those who would work with my lack of experience and power limited processor programming limited disk space?

  Thank you.

  Yes, I would say that all VMs are options to save money, I would try to go with oracle virtualbox, it is free I use osx to run a Windows 10 and machines virtual ubuntu it allows me to access the files across, although you mind a program under osx, maybe not 100% safe to use the same format as the same program under linux so that could cause a problem if this is the case.

• Printer/scanner Epson TX110 cannot install the printer driver

  Control Panel - Add/Remove programs. Details of the printer is displayed.

  Control Panel - printer and faxes - no icon printer not suggesting no driver in place.

  Reinstall using CD product a step only, that is, agree to the terms. Conversations with Epson have not solved the problem.

  Control Panel - Add/Remove programs. Details of the printer is displayed.

  Control Panel - printer and faxes - no icon printer not suggesting no driver in place.

  Reinstall using CD product a step only, that is, agree to the terms. Conversations with Epson have not solved the problem.

  If your second line means that the fax machines and Printers window is empty - NO printer icon - then the immediate cause is that the print spooler service is not running.

  Start the print spooler service as follows:

  Start > run > net start spooler > OK

  If everything works now, then fine.  More that likely, however, the print spooler service stops again.  If it does, the circumstances in which she stops (that is, what do you do when it stops) and all messages in the event viewer (start > run > eventvwr > OK) will help determine the cause.

  Generally, the print spooler service stops because a printer or a pending print job driver is corrupted somehow.  The indications here explain how to clean the printer drivers (necessary before re-installing) as well as all pending print jobs:http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Win 7 hangs after Time Machine restore - Fusion v8.02

  New to the group, but a user of merger for a long time on a MacBook Pro 2009.

  It's a little complicated, but here are the facts:

  I have experienced a complete hard drive failure but had the system saved Time machine. After installing the new drive (Samsung 850 EVO SSD, 500 GB), I installed Snow Leopard from a dvd. I then did a restore from Time Machine since the last backup and most things worked very well. However, when I started Fusion (v8.0 at the time), I got the blue screen of death in Windows 7. After a few attempts, he found a remedy that helped win 7 to start normally and everything seemed to work fine. So I decided to upgrade the OS to El Capitan, and I'm back to the blue screen of death of Win 7. Nothing I've tried has worked to get Windows started, I can't start even in Safe Mode.

  I tried a manual uninstall complete Fusion 8 and reinstalled, but no change. I don't have much on the partition for Windows, really, just 3 programs I can not run in OS X, no storage data here either. Time, as I see it, I have two choices: 1) do an another Time Machine restore and downgrade of El Capitan by returning to the previous configuration. (2) do a complete reinstallation of Windows 7 and Fusion.

  If there is a way to just do a reinstall of Windows, I'm ready for that, too. (However, since the upgrade of the El Capitan I can't use the optical dvd drive with all disks based on Windows... already reported)

  Any help would be appreciated.

  Scott

  As a follow-up, not long after my post, I get a call from VmWare support. (I submitted a ticket) Most excellent service. She takes control of my computer remotely and speaks to me through a new facility and a new virtual machine. I had downloaded a new version of Win 7 for installation and all went well.

  During the conversation I forget I wanted to install Win 10, but my system was apparently not compatible due to a graphics card or driver. She informs me that she has a solution for this and I am trying to install Win 10.

  Besides the support of VMWare!

• Response of the mouse very slow in AutoCAD - Fusion 3

  I just installed a clean version of Fusion 3 and created a virtual machine with Windows 7.  After the installation of AutoCAD 2010, I have a big problem with the performance of the mouse.  The problem is that there is a significant delay in the reaction between the mouse and the pointer on the screen that I move it inside of the drawing space.  As soon as the pointer moves in the menu Ribbon above the drawing space, he moves normally.  It also moves normally in all other cases within the virtual machine.

  I read some messages describing the erratic movements of the mouse, but this isn't the case.  Any thoughts on how to solve this problem would be highly appreciated.  As it is, it's unmanageable.

  Thank you!

  MBP OS X 10.6

  2.53 GHz Intel Core 2 Duo

  4 GB OF RAM

  Fusion 3.0.1

  WIndows 7

  If the mouse is still a little slow with 'Never optimize the mouse for games' the problem is surely a generic graphic performance problem since then in the main window drawing autocad draws the cursor of the mouse as normal graphics rather than using the path of accelerated mouse that is generally used.

  I recommend to try changing the graphics settings in AutoCAD, try playing around with enabling/disabling 3d acceleration in AutoCAD if possible, otherwise you can try to change the global setting of virtual machine to toggle the 3d in Fusion.