Clean GC 10.2.0.1 install > DB Upgrade to 10.2.0.4 > GC upgrade to 10.2.0.5

Similar Questions

• Second 64 Vista clean install from upgrade costs DVD, $99?

  My first Vista 64 installation was a clean installation of a DVD upgrade, that I have upgraded XP, and only a clean install was possible, then (2005). I chose Vista, he was then (and I think still is) only possible to use my ASUS mobo to combine with this OS PCI video card.  The hard drive died recently, and after I reinstalled on a new hard drive and made the odd updates hundreds, telephone support assured me it's 100% possible for them to turn it on again, but as that (I think change remote registry) process was "Advanced Troubleshooting", it would cost $99.  I asked to speak to his supervisor, and after a wait, the line was cut off. I called back, got the same result, and after a long wait, the second tech supervisor told me the same thing, with a reference to an article that pointed out that if I reinstalled a previous operating system of microsoft and started the process of upgrading within this installation of windows, it would activate.  I tried the first time, and the upgrade option has been grayed out, so I think it won't, if I go to XP.

  Do I use? Or do I have to buy Vista again?

  Hello

  When you have a version upgrade of Windows, you must install the previous operating system before installing the upgrade.

  Once you install Windows XP, you must install all security and optional updates for unity.  When you are finished, you install the upgrade.  It can then be activated.

• MY Hard Drive died and I need to re - install my upgrade disk

  My HD is dead.  I bought a new HD to replace.  Unfortunately we do not have back ups or anything, but it seems that I can not put my upgrade code to complete the installation.  I don't know what to do.   I'd rather not go buy another license that I already have several licenses to upgrade.  Is there a work around?  I can't be the first person on the planet with this situation!

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Get the 8004FF84 error when you try to download and install an upgrade for Windows

  I can't download and install an upgrade for windows. Try to install the product error code 8004FF84.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Can I install Windows XP first so I can install my upgrade Windows 7 operating system.

  Installation of Windows 7

  I had originally bought and downloaded the upgrade of Windows 7.  I am now faced with having to re - install Windows 7 because I'm upgrading to disks.  What I have to install Windows XP, then 7 because I bought the upgrade or there at - it a way to install 7 directly without having to go through the extra step... Thank you!

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Error code 646: I could not successfully install an upgrade (upgrade of security for WORD 9, # KB2092914)

  Since 12/08/10 I could not successfully install an upgrade (update of security for WORD 9, # KB2092914.) Six times I haveEncountered Unknown Error Code 646. Any suggestions? I have Windows 7.  Thanks you

  Hello

  It is a Microsoft Fixit who will help with this issue.

  You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
  Office updates
  http://support.Microsoft.com/kb/2258121

  Check this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot install the upgrade to Windows XP Pro SP1 of Windows XP Edition family with Service Pack 3.

  Cannot install upgrade

  The home computer has Windows XP Home (pre-installed) Edition with Service Pack 3.  Buy XP Pro SP1 update.  Can not install the upgrade, get the message: Setup cannot continue because the version of Windows on your computer is newer than the version on the cd.  I tried method 1, 2, 3 and 4 on how to remove Windows XP Service Pack 3 from your computer.  None of these methods works.  Y at - it software to locate and Uninstall SP3 so I can install xp pro upgrade, that I bought?

  Hello

  I suggest to Uninstall SP3 and retry the upgrade. When the upgrade has completed, you can download the latest Service Pack.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Restart the computer after the uninstall is complete and retry the upgrade.

  Important: Make a backup of your data before you uninstall the Service Pack.

• How to install or upgrade to Windows Media Player 11 in Windows XP computer?

  Original title; Windows Media Player.

  I bought a MP3 player that requires Windows Media Player 11, mining said Windows Media Player. How to install or upgrade to 11 or is it really necessary?

  Hi SueH12,

  The default version of Windows Media Player in Windows XP is Windows Media Player 9.

  You can download & install Windows Media Player 11 from this link:

  Windows Media Player 11 for Windows XP

  Hope the helps of information.

• When I try to install the upgrade of the software real player says I need, he says that there is no installed: 246 encoder and not enough disk space

  no installed: 246 encoder

  When I try to install the upgrade of the software real player says I need, it is said that there are no H 246 encoder installed and not enough disk space, even if I removed several programs releasing upward (I hope) a generous amount of disk space. I have a Toshiba satellite P105-S6124 2006.

  Hello

  ·         The question is limited only with Real Player?

  Method 1:

  You can try running Disk Cleanup in Windows XP, which will safely remove unused files from the computer and check if that tool:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  You can try to install the latest codec pack from the Web site by using one of your favorite search engines and check if it helps:

  With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  See also:

  http://www.Microsoft.com/download/en/details.aspx?ID=507

  Method 3:

  If the problem is specific to Real Player, you can try to uninstall ad reinstalling the program and check if it helps.

  How to change or Remove a program in Windows XP

• Upgrade Windows XP Home Edition purchased. Lost product key number because file missing during the move. Have the box with bar code. What should I do to install the upgrade without the key to 27 characters?

  No detail, lack just the key needed to install the upgrade.

  Hi Ytsircfay,

  Unfortunetly Microsoft cannot generate new without the old keys product keys. I look on the machine, if it's OEM and see if there is a key on it. If this isn't the case, then you will need to buy new software with a key.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• Can I install Win7 upgrade on another computer after upgrade Win8 on my computer?

  Initially, my computer came with Vista installed. Three years ago, I bought an upgrade to Win7 and installed. A few months ago, I bought and installed an upgrade of Win8 on the same computer. I have another computer running Vista, and I was wondering if I could use the Win7 upgrade license to upgrade this computer. Technically, the upgrade of Win8 could meet the requirements with the Vista license on the original computer. I run Win7 on the other computer without having to buy a new license. Is this possible? The upgrade disks are details of Microsoft.

  Yes, it is possible. Because the machine was originally license with a qualification license (Vista), he would take the place of this license, thus freeing the Windows 7 Upgrade to serve elsewhere. So, Yes, you can transfer it to other Vista machine.

• I don't know the serial number for LR4 - try to install the upgrade to LR6

  I need help to install LR6. I bought the student version of the LR4 community college years but cannot find the serial number. How can up to complete installation of newly purchased LR6?

  If you have purchased the version upgrade of the LR6 (not full version) you MUST have the serial number of the previous version to install the upgrade

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  If the link above does not help, nobody here can help you... and if ever, you saved your previous version so that it shows in the system from Adobe, Adobe even will not be able to help

  The only thing you can do is return your LR6 upgrade for a refund and buy the full version

• How to install an upgrade of LR 6 on a second computer?

  How to install an upgrade of LR 6 to a second computer?  I bought the upgrade and need to get out of my main computer state temporarily.   I don't want CC!

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• PS CS5: Cannot install the upgrade Camera Raw

  I have a valid copy of CS5 and I can't install the upgrade.

  Post edited by: Melissa Rios

  Help > function Update is more communicating with the server. You will have to do this manually.

  The last cab for CS5 is 6.7.1 download the and if you have Windows, right click on the installer and select run as administrator

  PC Adobe - Adobe Camera Raw and DNG Converter: for Windows: Camera Raw 6.7.1 update

  Mac Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Camera Raw 6.7.1 update

  Gene