Cleaner to no progress / lnSizeCorrectionFactor became very low

Similar Questions

• Portege Z930 - display became very low

  I have a Portege Z930 ultrabook. A day or two back the display suddenly be permanently turned off. However, if I look closely, I see that the image is there but VERY, VERY weakly. It is as if the light has been turned off (although since the screen is DIRECTED which is not the case).

  I was able to get a replacement screen, but that made no difference.

  The video card on the motherboard works - at least insofar as I can plug in an external monitor and see everything correctly.

  I wonder if a hardware switch inadvertently triggered and miss me the framework. Or I suppose it could be a witch that turns off the screen when the cover is closed, which became faulty...

  The Z930 has fonctionnee Windows 8.1 very happily for the last year or two.

  I hope that it will be something simple, rather than a motherboard failure...

  Thanks in advance for any ideas.

  Andrew

  In my opinion, this is material nuisance and has nothing to do with the settings.
  In the past we have had several discussions with the same or similar problems and described problem was related to the defective FL inverter.

  Have you ever talked with Toshiba service?

• Warning quota IMAP but I have cleaned already and its use is very low

  I get a warning of Quota IMAP (101%) on one of my gmail email accounts.
  I read the articles on cleaning and avoid Quota IMAP problems and have done what I can delete and move e-mails.
  But my space usage report shows that I use only 36MB for this account which seems really small.
  (my main Gmail account using 8.8 GB and I do not receive a warning.)

  what I missed or where can I turn?

  Peter

  Gmail will also save all e-mails, both sent and received in 'all mail '.

  Deletion of an e-mail from a folder does not result removes the email in "all mail".

  Basically, all letters, incoming and outgoing are saved in the folder "all messages".
  Labels can be applied to create a visual effect to appear as in other folders, for example: Inbox or one that you create.

  So to delete an e-mail from for example: Inbox simply deletes the "Inbox" label and still leaves the email in "all messages".

  • https://support.Google.com/mail/answer/78755?hl=en

• impression on my e mails Thr became very low

  the print is too small to read my emails, it wasn't like that before, when I access my E Mails by aol, the impression is very good, so I think it's a problem with my setting Firefox can you please help me?

  On the keyboard, use Ctrl + 0 (zero) to reset the zoom level for this area.

• After you run a Microsoft FixIt, everything on the screen became very low.

  Microsoft fix it messed up display - I have a monitor CRT - how to fix?

  Please help - the microsoft fix it reset my display settings.  At first, I didn't click that I got the CRT monitor then it sets the parameters as if I did not.  I can't see the screen like this.  It is too small.  Help!

  Hello

  Microsoft Fix it have you trying to run?

  Method 1:

  I suggest you to return the item and try to set the resolution of the screen and check if it helps:

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  See also:

  Common tasks

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_ct.mspx?mfr=true

  Method 2:

  See the article and check if that helps:

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• all the text on the internet became very low. How can I change to a larger?

  Text too small Internet

  Hello

  Please try this:

  Hold down the CTRL key, and then press on + (plus) sign several times.

  I hope this helps.

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• Tecra A3 has very low volume

  Hi all, I bought a used Tecra A3. With Win XP Professional, service pack 3. I have not all records with him.
  It was working well before a week or two ago. It has very low volume, I have all levels of volume and the maximum wave. The manual volume knob on the front has no effect, it used to work
  I think the problem started when I downloaded youtube FLV files, then I downloaded a program ('super' was the name of the program) to convert the FLV files into AVI files.
  I uninstalled the program of conversion, I failed to convert anything. I've uninstalled and reinstalled the driver of sound card - card his Realtech AC97. I uninstalled and reinstalled WMP11. None of this has helped.

  On this view, I saw how to do a system restore. I thought to perform the system recovery can solve the problem.
  My question is, if I perform the system recovery, to the GET to the elimination of the parameters of the box, it will clear the WIN XP operating system?

  Thanks for any assistance received, Darren.

  Hello Darren

  Please do not be angry on me, but make you it so complicated. Let's be clear on this:

  Saved on DVD of recovery recovery image contains the operating system, all necessary drivers, Toshiba tools and utilities and some additional applications such as a DVD player. So if you want to install the OS by using Toshiba recovery media will be deleted all content saved on the HDD, formatted partitions and lately OS will be installed. When all is finished you will have clean operating system preinstalled. It will be the same State as the first day after the default purchase.

  Then I don't understand what you mean now with the restore process. During the installation of recovery is complete you must not install or configure anything. Just boot OS, install your favorite software, install the Microsoft updates and be happy.

  If you have any other questions please post again, but please if you ask something to be clear and precise.

• Satellite L20-101 - very low sound

  Hello

  I have a Toshiba laptop Satellite L20-101, Windows XP (Service Pack 3). Yesterday, the sound of my laptop started to play very very low.

  Drivers audio (conexant AC-link audio) seems to work fine, and I'm all set to maximum volume.
  It was sudden. One moment he was working well, and the next time I start it the sound was strangely low.

  I don't know if it's a hardware problem, or if she could we have resolved to restore the entire system with the recovery CD (I prefer not to do so).

  Any ideas? Any help?

  Thank you

  Hello

  I think you should check the sound volume using the headphones.
  If the headphones work correctly the problem might be related to internal speakers.

  But to be honest it is really not easy to say what causes this problem as I said can be faulty speaker but you should also check all possible settings and perhaps a new OS reinstall would also be a good idea.

  It would be useful to know if the sound issue would persist using the laptop with clean, factory setting.

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• my computer became very slow, but it shows no virus. Videos don't is not good and updated loading in service is very slow?

  My computer became very slow and takes forever to start up. I ran a diognostic on it and he registered all those sites that open at startup, but I don't know which I need and those who didn't. In addition, do not load my videos, they stop and start!

  Hello

  1 are there any changes made recently to the computer?

  2. What is the security software installed on the computer?

  3. What are the steps that you have already tried?

  Follow the steps in this article.

  Optimize Windows Vista for better performance: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

  Try to set up your computer in a clean boot state, and check if the same issue occurs

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  I hope this helps.

• Why 4 GB of ram exhibits very low performance in vista 64-bit?

  IAM using windows vista 64 bit and I have installed 4 GB of ram I noticed very low performance and low score 4.5 I tired to change the positions of the ram and tried to use a different kind of ram, but my score of 4.5 with 2 GB or 4 GB ram sucked into this score with a low yield iam very disappointed of what can one help me?

  2 * 2 GB samsung pc2 6400 4 GB
  and I tried transcend pc2 5300

  HI BUD85

  Contrary to what said 'DaGreenOne' on 'thread lock', I can assure you that we will not do.
  We strive to help you with this problem.  However, I kind of sharing what he or she said several suggestions have been posted but nothing is your problem.  There was some good suggestions posted here.

  It's frustrating, I know.  Question: If you put the 'original' of return RAM in the system and restore the system back to how it was when you bought, 1st you get the experience index you originally?  This is assuming that you are ready to perform a system recovery which erases the hard drive clean and make it the way it was when manufacturing built the machine.

  Please confirm you "not" mix the different types of RAM in the computer, which means that you put in two sticks of 6400 and two sticks of 5300 (these numbers used for example)

  Thank you

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

  Original title: slow down the computer

  Hello world

  I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

  I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

  Yes svchost.exe is eating all your cpu about

  Cause the most common was that the windows update system stuck

  Please go to start and Panel and Windows updates

  On the top left click on change settings update.

  Switch to never look for updates,

  

  

  After the above, restart your machine.

  After reboot see if these updates are installed if not install it.

  KB3161664 main download page

  https://TechNet.Microsoft.com/library/security/MS16-073

  Win 7 32 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

  Win 7 64 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

  Same deal with it if it is not already installed

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Once the two of them are installed,

  Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  

• BlackBerry Smartphones very low performance after impossible to install the game (8310) necessary to reset the phone?

  Hello! Today, I tried to install a game using the Desktop Manager. I can see the icon in the menu, but does not (module not found) and the Desktop Manager does not see the game installed (or in options-advanced-applications)

  The problem is that now the phone has very low performance and I can barely use it, it's too slow.

  I think that the phone must be reset to the settings to factory or something.

  Can someone help me to do this?

  Thank you!

  Hello

  What I was doing to completely wipe my BB. I wrote this before and it printed.

  If your device does not work, perform a backup now if you have not already done save the file to a place and a name that you can easily locate it on computer.

  I then uninstalled DTM and then deleted all the other references to BB/Rim in Windows Explorer, thus eliminating the operating system for the BB to the computer in order to ensure that the version I want to reinstall a new version uploaded.

  Get the latest Desk Top software DTS)
  http://us.BlackBerry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&CP=OTC-DSKTPSW

  and install it on the computer.

  Get the latest version of the operating system

  http://us.BlackBerry.com/support/downloads/download_sites.jsp

  and save it on computer.

  To erase all data on your BlackBerry device, follow these steps.

  (1) download JL_Cmder http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html

  (2) install JL_Cmder to the computer.

  (3) double check you have already saved the BB. If you DO NOT, you will lose all data.

  (4) make sure that DTS is closed and plug in the BB to the computer via USB

  (5) to reach the JL_Cmder on your computer and double-click it to start. Now, it may take a few tries to connect, so persevering until he does.

  (6) on the first screen, press a key to continue.

  (7) now, if your device uses a password, enter it now. If not, press "N".

  8) press 4 to start CLEANING

  (9) press on 'Y' to continue

  (10) now type "blackberry" to continue

  (11) on the BB, you see a white screen with an error "507". Don't worry, that's what you want! You are now ready to install the operating system.

  Launch the new Desk Top software on the computer

  (1) on the homescreen of the BlackBerry® Desktop Software, click Device > update my device.

  (2) click on view the other Versions. Click the version of the new OS you previously downloaded.

  (3) click on install. The DTM will install the OS and then provide you with a list of applications to install. If you have had problems with an application, do not install it.

  Do not disconnect the device until the whole process is finished and restarted the device.

  After 10 minutes, restart again by removing the battery slot while tension and leave for a few minutes.

  Leave it again for 10 minutes. You should now have a fully functional BB!

• I have a computer laptop packard bell who became very slow when stopping down

  I HAVE A LAPTOP FROM PACKARD BELL, WHICH BECAME VERY SLOW CLOSE. I SUSPECT THAT THERE IS A BACKGROUND PROGRAM SHUTDOWN TACTIC, BECAUSE SOMETIMES A BLUE SCREEN APPEARS LITERALLY HALF A SECOND, THEN DISAPPEARING TOO FAST FOR ME TO READ. HOWEVER, IVE JUST MANAGED TO SEE 'FORCE SHUT DOWN' WILL DISPLAY. CAN ANYONE HELP?

  PS - IM RUNNING KASPERSKY PURE 2012 AND I LOADED DISKKEEPER (TRIAL VERSION).

  EXCEPT THAT IVE BEEN THRU ALL MY STARTUP PROGRAMS AND SEVERELY LIMITED THEM.

  Most of the time, you can use the Task Manager to see which programs are hogging resources.  Make sure you click on tab the process, and then on the small button at the bottom left that says something like "show processes from all users".

  In addition, switch to view... Select the columns entry and select other readings/o and i/o
  You can sort the columns by clicking on the title - this way, you can control what is spking during closing.  Get the name of the process that is spking and we can start watching them.

  Also, try the clean boot here procedure to solve problems: http://support.microsoft.com/kb/929135
  Another link for him here: http://support.microsoft.com/kb/331796