impression on my e mails Thr became very low

Similar Questions

• Portege Z930 - display became very low

  I have a Portege Z930 ultrabook. A day or two back the display suddenly be permanently turned off. However, if I look closely, I see that the image is there but VERY, VERY weakly. It is as if the light has been turned off (although since the screen is DIRECTED which is not the case).

  I was able to get a replacement screen, but that made no difference.

  The video card on the motherboard works - at least insofar as I can plug in an external monitor and see everything correctly.

  I wonder if a hardware switch inadvertently triggered and miss me the framework. Or I suppose it could be a witch that turns off the screen when the cover is closed, which became faulty...

  The Z930 has fonctionnee Windows 8.1 very happily for the last year or two.

  I hope that it will be something simple, rather than a motherboard failure...

  Thanks in advance for any ideas.

  Andrew

  In my opinion, this is material nuisance and has nothing to do with the settings.
  In the past we have had several discussions with the same or similar problems and described problem was related to the defective FL inverter.

  Have you ever talked with Toshiba service?

• After you run a Microsoft FixIt, everything on the screen became very low.

  Microsoft fix it messed up display - I have a monitor CRT - how to fix?

  Please help - the microsoft fix it reset my display settings.  At first, I didn't click that I got the CRT monitor then it sets the parameters as if I did not.  I can't see the screen like this.  It is too small.  Help!

  Hello

  Microsoft Fix it have you trying to run?

  Method 1:

  I suggest you to return the item and try to set the resolution of the screen and check if it helps:

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  See also:

  Common tasks

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_ct.mspx?mfr=true

  Method 2:

  See the article and check if that helps:

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• all the text on the internet became very low. How can I change to a larger?

  Text too small Internet

  Hello

  Please try this:

  Hold down the CTRL key, and then press on + (plus) sign several times.

  I hope this helps.

• Cleaner to no progress / lnSizeCorrectionFactor became very low

  Hello

  We have an application that uses I 5.0.104.  We have recently had a problem where a transaction log I continued to increase in size (3 GB/hour).  We eliminated the possibility of a lack of enforcement by comparing the records of the application against getDatabaseStats, so we know that the application was not somehow forget delete records.

  
  

  Call for cleanLog() of JEMonitor had no effect on the JDB files and returned 0.  getEnvironmentStats() revealed that lnSizeCorrectionFactor had dropped to 0.079.   Enable logging for com.sleepycat.je.cleaner.Cleaner gave us:

  2016-01-18 17:10:58, 128 DEBUG logging [vacuum-1]. Log4jLoggingHandler (Log4jLoggingHandler.java:83) - [myvhost] file to a chosen lower used for cleaning. fileChosen: 0x3ca92d lnSizeCorrectionFactor: totalUtilization 0.07944859: bestFileUtilization 2: isProbe 0: true

  2016-01-18 17:10:58, 183 DEBUG logging [vacuum-1]. Log4jLoggingHandler (Log4jLoggingHandler.java:83)-[myvhost] CleanerRun 1801 ends on the probe of file 0x3ca92d = true invokedFromDaemon = true finished = true fileDeleted = false nEntriesRead = 1902 nINsObsolete = 0 nINsCleaned = 0 nINsDead = 0 nINsMigrated = 0 nBINDeltasObsolete = 0 nBINDeltasCleaned = 0 nBINDeltasDead = 0 nBINDeltasMigrated = 0 nLNsObsolete = 0 nLNsCleaned = 0 nLNsDead = 0 nLNsMigrated = 0 nLNsMarked = 0 nLNQueueHits = 0 nLNsLocked = 0 logSummary = < CleanerLogSummary endFileNumAtLastAdjustment = "0x4c44fe" initialAdjustments = "5" recentLNSizesAndCounts = "Horn : 9191 / 58 - East: 6998244 / 1386 Cor: 6407 / 6 - East: 7969221 / 636 Cor: 5936 / 24 - East: 7418832 / 444 Cor: 16683 / 56-is: 8912936/434 Cor: 17058 / 89 - is: 8143993 / 523 Cor: 9191 / 58 - East: 6998244 / 1386 Horn: 6407 / 6 - East: 7969221 / 636 Cor: 5936 / 24 - East: 7418832 / 444 Cor: 16683 / 56 - East: 8912936 / 434 Horn: 17058 / 89 - is: 8143993 / 523 "> inSummary = < totalINCount INSummary = totalINSize '402' = '160621' totalBINDeltaCount = totalBINDeltaSize '89' = obsoleteINCount '20532' = obsoleteINSize '299' = '151932' obsoleteBINDeltaCount = '88' obsoleteBINDeltaSize '20435' = / >» estFileSummary = < summary totalCount = totalSize "2192" = totalINCount "9850987" = "491" totalINSize = "181153" totalLNCount = totalLNSize "1409" = maxLNSize "9656676" = obsoleteINCount "4317683" = '387' obsoleteLNCount = '975' obsoleteLNSize = "1512683" obsoleteLNSizeCounted = getObsoleteSize "886" = getObsoleteINSize "3054503" = getObsoleteLNSize "142782" = getMaxObsoleteSize "2898563" = "9805672" getMaxObsoleteLNSize = "9649732" getAvgObsoleteLNSizeNotCounted = "15571.688" / > recalcFileSummary = < summary totalCount = totalSize "2192" = totalINCount "9850987" = totalINSize "491" = "181153" totalLNCount = totalLNSize "1409" = maxLNSize "9656676" = "0" obsoleteINCount = obsoleteLNCount '387' = obsoleteLNSize '975' = obsoleteLNSizeCounted '1529741' = getObsoleteSize '975' = getObsoleteINSize "1685681" = getObsoleteLNSize "142782" = getMaxObsoleteSize "1529741" = getMaxObsoleteLNSize "1685681" = getAvgObsoleteLNSizeNotCounted "1529741" = "NaN" / > lnSizeCorrection = 0.07944859 newLnSizeCorrection = 0.07944859 estimatedUtilization = 69 = 82 recalcUtilization = 83 correctionRejected = false correctedUtilization

  Restart the application, the transaction log I shrank to normal size, but the situation has come back a few hours later and continued to remanifest after reboot later.  So far, our attempts to understand/reproduce the exact second stage failed.  The unique environment of I is ultimately used by many different applications and have all of the different traffic profiles (frequency/size of folders, etc.).

  We have getEnvironmentStats() in production and see that once the lnSizeCorrectionFactor starts to fall below 1, normally, it continues to fall and once it hits 0.5 stop cleaning and we see the growth of the unlimited transaction logs.

  
  The application is mature enough and worked in production for many years without seeing this problem.  (Apparently the problem is correlated with a change that doesn't have) since I 5.0.73 I 5.0.104 b) past to CacheMode.EVICT_LN and reduced je.maxMemory (our application cache the data itself to a higher level, so put the I caches of leaves was redundant from our point of view).

  
  

  Prompted by Re: bloated disk EI 5.0.73 and 5.0.97 changes, we test our application with EnvironmentConfig.CLEANER_ADJUST_UTILIZATION is disabled.    So far, everything seems fine.  We are aware that without je.cleaner.fetchObsoleteSize = true vacuuming will assume that all the records in a journal are medium in size and so can clean more/less clean, but we do not want to pay the cost of additional reading.

  
  

  If you were able to comment on the nuisance of cleaner behaviors with CacheMode.EVICT_LN and cons for the use of EnvironmentConfig.CLEANER_ADJUST_UTILIZATION disabled in isolation that would be appreciated.

  
  

  Thanks in advance
  

  Hi Keith,

  As you read the more information about this problem, I guess you know that the upgrade to the 6 EJ (use the most recent version of course) is the only solution, but assigning false to CLEANER_ADJUST_UTILIZATION works for some applications. If it works for you, that's fine, but please plan to upgrade.

  The reason why EVICT_LN to highlight this problem is that, after that the LN (registration data) is expelled, the Btree contains more his size. If you delete the record, guess the size using an average. If the LN was still in the cache, the size would be called at the time it is deleted. I 6 and above all, the size are stored in the Btree even after the LN is expelled, which solves the problem.

  -mark

• my 27 Imac late 2009 became very slow

  My 27 Imac late 2009 became very slow - I think especially after I've upgraded to El Capitan. Otherwise, everything in the computer works perfectly and I m using only 200 I have the 1 TB. Onyx and other tests can't find anything wrong. I mainly use my computer for word documents and to manage his photos about 30 000. The internal memory is 2 x 2 GB. Does anyone have any suggestions of what I could do to speed it up? Thank you.

  I wish I had an answer, but all I can do is rather echo to your problem. I have a 19 mid-2007 "iMac, contributed to the maximum with the RAM, 1 t disc hard less that half full, who did the same thing - he has worked with El Capitan until I updated to the latest version. Once that has happened the machine became so slow as to be unusable. It would take ten or twelve minutes to record a mouse click. When I restarted the machine, it took 32 HOURS to start (Fortunately it isn't my main Mac production).

  Last week, I tried all the remedies of common sense - by removing unused software, keeping an eye on the activity monitor (there is nothing fancy here), etc. Finally, I did all the stuff start, PRAM, run utilities disk (no noted problem) and even tried to reinstall El Capitan to a bootable USB I did with my first Mac, the reinstall, but seemed not 'take' somehow - he wanted to repeat the installation procedure again and again.

  I use the little Mac for Internet, e-mail and (as Karlis2) deal with some of the oldest pictures in my files - I'm sure that I have pictures on Time Machine, so I'm not too worried about it, but this was the first Mac way back in the day, I bought with my money and I'm a little sentimental on and would like to resurrect if possible... I wonder if there is a way to restore the operating system to an earlier version and it would make a difference?

• Mac Mini became very slow all of a sudden

  This morning, my Mac Mini became very, very slow. It's a 2009 with 4 GB of RAM and hdd 120Gb standard.

  I run with a keyboard and bluetooth mouse and due to its slowness, I wanted to run the hardware test to see what was wrong. (As is always the original HARD disk, I am wary of its remaining life expectancy). However, everything I try, I can't start anything on the mini as a normal reboot. If I have D, hold down option-D, hold SHIFT to safe mode, nothing seems to influence his start-up.

  Any thoughts? And also, suggestions of things to check?

  Run > Etrecheck.com and post back here with the results.

• Mac became very slow viruses

  Top of desktop Mac became very slow all of a sudden. Could there be any virus. How do I solve the problem

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• A text is cut on the right in the impressions of Windows Live mail emails and web pages.

  A text is cut on the right in the impressions of Windows Live mail emails and web pages.

  Hi Doug MacDonald.

  1. Did you the latest changes on the computer?
  2. What web browser are you using to print Web pages?

  If you use Internet explorer, then change the margin settings to the title of the page setup in the file menu and check if that helps.

  See the articles below and check if it helps.

  Printing webpages: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/printing-webpages-frequently-asked-questions

  Printing webpages: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-frequently-asked-questions

  Note: The items above are also applicable to Windows XP.

• I have a new PC AspireZC-606, it became very very slow, high flow &amp; windows 8.1

  I have a new PC AspireZC-606, it became very very slow, high flow & windows 8.1. I got rid of a PC old 10 year with XP on it I think it was faster, sometimes without wide services broadband high speed. Advice or advice welcome.

  Hello

  I would like to try this new driver for Intel (Aspire ZC-606) chipset:

  Chipset

  Intel

  Chipset driver

  9.4.4.1006

  55.4 MB

  02/10/2015

  Download

• my computer became very slow, but it shows no virus. Videos don't is not good and updated loading in service is very slow?

  My computer became very slow and takes forever to start up. I ran a diognostic on it and he registered all those sites that open at startup, but I don't know which I need and those who didn't. In addition, do not load my videos, they stop and start!

  Hello

  1 are there any changes made recently to the computer?

  2. What is the security software installed on the computer?

  3. What are the steps that you have already tried?

  Follow the steps in this article.

  Optimize Windows Vista for better performance: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

  Try to set up your computer in a clean boot state, and check if the same issue occurs

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  I hope this helps.

• My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

  Original title: slow down the computer

  Hello world

  I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

  I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

  Yes svchost.exe is eating all your cpu about

  Cause the most common was that the windows update system stuck

  Please go to start and Panel and Windows updates

  On the top left click on change settings update.

  Switch to never look for updates,

  

  

  After the above, restart your machine.

  After reboot see if these updates are installed if not install it.

  KB3161664 main download page

  https://TechNet.Microsoft.com/library/security/MS16-073

  Win 7 32 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

  Win 7 64 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

  Same deal with it if it is not already installed

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Once the two of them are installed,

  Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  

• Incoming e-mail is recovering very well. Outgoing email will not send.

  Original title: Outgoing e-mail server

  Incoming e-mail is recovering very well.  Outgoing email will not send.  It seems that no one supports more Windows Live Mail.

  Sending works well? Doesn't look like it to me. On the Advanced tab, change the port from 25 to 587 number and also check to use SSL. On the servers tab, you should probably check my server requires authentication and, optionally, using authentication in plaintext in the connection. You will hace to play with and test by sending a message to yourself.

• I have a computer laptop packard bell who became very slow when stopping down

  I HAVE A LAPTOP FROM PACKARD BELL, WHICH BECAME VERY SLOW CLOSE. I SUSPECT THAT THERE IS A BACKGROUND PROGRAM SHUTDOWN TACTIC, BECAUSE SOMETIMES A BLUE SCREEN APPEARS LITERALLY HALF A SECOND, THEN DISAPPEARING TOO FAST FOR ME TO READ. HOWEVER, IVE JUST MANAGED TO SEE 'FORCE SHUT DOWN' WILL DISPLAY. CAN ANYONE HELP?

  PS - IM RUNNING KASPERSKY PURE 2012 AND I LOADED DISKKEEPER (TRIAL VERSION).

  EXCEPT THAT IVE BEEN THRU ALL MY STARTUP PROGRAMS AND SEVERELY LIMITED THEM.

  Most of the time, you can use the Task Manager to see which programs are hogging resources.  Make sure you click on tab the process, and then on the small button at the bottom left that says something like "show processes from all users".

  In addition, switch to view... Select the columns entry and select other readings/o and i/o
  You can sort the columns by clicking on the title - this way, you can control what is spking during closing.  Get the name of the process that is spking and we can start watching them.

  Also, try the clean boot here procedure to solve problems: http://support.microsoft.com/kb/929135
  Another link for him here: http://support.microsoft.com/kb/331796

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck