cleaning disc does not properly?

Similar Questions

• Cleaning disc does not remove "debug dump and system error memory dump files".

  Original title: clean windows vista disk

  on my drive clean I have 112 mb on the debug dump files and 112 mb on system error memory dump files. My problem is when I try to delete these files from my cleaning disc will not remove these files. could help me with this problem?

  Hello

  1. what happens when you try to delete the files of debugging bump?

  2. do you get any error code or error message?

  3. have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Start in safe mode and then try to perform a disk cleanup and check if it works.

  Step 1: Start Windows Vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Delete files using Disk Cleanup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  Also check the event viewer on the program that is causing the problem.

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Hope the information is useful.

• Cleaning disc does not - update required by message and none are available to download

  Even if I think that I had a recent update in the last week or two, I was unable to run disk cleanup before, I ran on a regular basis.  Disk Cleanup Manager error message does not work, and the proposed Windows solution is to download the updates.  However, there is NO update to download, and I still get the same error message!

  I also have this same problem. There are 48 h disk cleanup worked perfectly. 24 hours ago that the problem began. Cleanup utility starts normally, then faints. I am running XP with automatic updates of Windows.

  I have not received any error message.

  Can't find any solution on the net. Need instruction for XP please

• My cleaning disc does not work, why would that happen?

  Open it several times checked all the boxes and I went after, and the files are still there?

  It is possible that some of the files were used so that they could not be deleted.  The amount of bytes will be released decreases every time you run it?  This is what should have happened.  Otherwise, you can check for viruses and corrupt files.

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Good luck.

• I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

  I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

  Hello

  Have you changed the boot order?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  See you soon.

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VMware Fusion/Bootcamp does not properly.

  I'm under VMware Fusion 2.07 (Yes, I know version 3 came out, but money was tight) on an iMac 20 ". Mac OS X 10.6.4. I recently had the hard drive in this system upgrade, 300 GB to 1.5 TB; new installation of Mac OS X, all restored since my Time Machine backup, then installed Windows XP Home Edition, using boot camp. (300 GB partition.) So far, so good; It works well.

  When I say VMware to start the Bootcamp partition as a virtual machine, it goes through the usual process, then comes up with the dreaded error message: "the Boot Camp partition is not prepared to stand as a virtual machine. It seems that Windows is not stopped properly the last time it was used. »

  I tried to remove my configuration of VMware; I checked the partition tables and the types (the MBR and GUID alignment between them - as I told Windows to reformat the partition, rather than change the partitioning, it is what I expected); everything seems to be correct. I noted, however, that vmware-rawdiskCreator and fdisk print the size of the partition HFS + sub-1994391552, which seems to be strangely close (ie: bang on) an integer signed enveloping output in comparison with the tool GUID of. In exactly the same way, the beginning of the Windows partition is printed as 1993717760.

  Is it possible that this affects the failure, or is it just a loophole? I'm getting a little testy (although not significant at this stage, since I can afford now space drive needed to have a separate Windows for VMware image instead of joining the two together). I have attached the vmware.log in the hope that it might be useful.

  Your muchly.

  If the chkdsk command and Windows clean restart does not help, the only alternative is to force the partition to mount using the virtual machine. However, this should only serve as a last resort, since it can potentially corrupt data on the Windows file system. Make sure you have a backup of important data on the Boot Camp partition.

  To force the partition to mount, you will need to replace one of the files of the virtual machine for assistance. Go to Applications/VMware Fusion.app/Contents/Resources/naos-1.0.vmwarevm/ (use right click and view the contents of the package to get inside VMware Fusion.app and Ban - 1.0.vmwarevm). Then delete (or move to a backup) the reconfig.iso of the file and replace it with the version attached to my message.

  Note: this file is designed to work only with Fusion 2.0.7. Use it with newer versions will probably fail.

  This should allow the reconfiguration step to cross, and Windows can perform a check disk on first boot. If it isn't, it's probably a good idea to run chkdsk /f just in case.

• Photoshop 5.5 installation disc does not load

  A virus ate my office and I had to reboot Photoshop. Photoshop 5.5 installation disc does not load. Any ideas?

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Apple dvd player will not eject a disc, does not show in the devices

  I'm on El Capitan, the player has played other discs, this disc does not appear

  There is no manual of the dvd drive eject

  drive does not appear in the devices

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  How the disk by force ejecting

  Mac Mini

  How to eject a defective DVD?

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• fan does not properly

  Does not properly on the laptop

  Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services