clear Boolean indicator after ERROR

Similar Questions

• Clear cache page after deletion to avoid errors ora-1403 Apex 5.01

  Hi all

  Always 'new' at Apex!

  I'm getting ORA-01403: no data available error after deleting a line in a 5.01 Apex form created from the interactive report + model form.

  After searching the forum, I found a direct reference to this situation:

  ORA-01403: no data available on the deletion of a record

  --------------------------------------------------------------------------------

  Denes Kubicek December 9, 2014 01:40 (in response to 2805872)

  After deleting a record, you must clear the page cache. If you do not have the primary key item session state can keep the old value of the deleted record. The page loading process will try to retrieve this value from the table and meet no data found.

  ---------------------------------------------------------------------------------

  Unfortunately, I do not know where or how to " " " clear the cache of the page ' after deleting a record.

  I saw the reverence to APEX_UTIL. CLEAR_PAGE_CACHE but I don't know where to use

  Others say still set the value of the key null column.

  The documentation of the Apex is said to use the URL:

  2.9.3.2.2 example: clear cache on a Page and passing an element value

  This example shows how to implement a form of update. It erases the existing information and sets the value of the element (usually a primary key).

  f?p=6000:6003:&APP_SESSION.::NO:6003:MY_ITEM:1234 

  This example:

  • Runs the application 6003 6000 page and uses the ID of the current session
  • Specifies to not show debug information ( NO )
  • Clears all values maintained by the current session for the items on page 6003 cache
  • Sets the State of an element called session MY_ITEM value1234

  But I do not know where or how to do that in the context of the key Suppr.

  Can someone point me in the right direction? I'm learning the Apex using as many integrates native as possible features.

  If clearing the cache of the page, that's what needs to be done after the removal of a line, would not these features have been integrated to the Delete key?

  Thank you

  Mason

  OK, after wandering in the desert for a while, I tried this approach to clear the cache once you press the button Delete and it doesn't seem to work.

  I created a new process called "Clear the cache" after the process of "line process of...» »

  The process to clear the cache was of type PL/SQL Code with the section of Code PL/SQL, the value 'APEX_UTIL. CLEAR_PAGE_CACHE (2); »

  I don't know if it's a good way to do this, or if the accepted practices, or what side effects will rain down on me that they are, but at least I got a result that has solved my immediate problem.

  So nice to click on delete and not greeted with an ORA-01403 error!

  Thanks to everyone who helped me in on it!

  Mason

• App Xpera Z2 SMS indicating the error

  Hello

  Messagin App (application default), indicating an error when sending a message after salecting contact in my address book.

  EROOR is "Message has no valid recipients".

  Please help me for the same thing.

  If I were you, I have all my contacts to Gmail, then edit them and return transfer transfer

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

  Hello error 53 matched a UN failure to the home button you had to replace the screen or the home button alone or outside apple store so if you replace the button man of origin and you restored the iPhone error will be fixed but if you sell the buyer has no access to the data of the iPhone

• Maintain the value of the indicator after the threshold is exceeded

  I have a part of my VI using an auto indexed for loop to display an array of 10 values boolean indicating if a threshold test has been exceeded.  If a false value is received on any one of these 10 channels, I need to have a light, the temperature of this channel.  The problem I have is that the false values continue to update the value of the temperature, rather than keep the temperature when the threshold has been exceeded.

  Research on discussion forums, it seems that maybe a shift register is how it is done.  Add 10 records to offset which allows me to watch the last value for each channel, the best way to handle this?

  Sounds like a job for a Feedback node.

  

• When I try to update indicating the error 8024402f please fix this

  When I try to update indicating the error 8024402f please fix this

  Why did you switch to Win7?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  You may encounter temporary connection [e.g. 0x8024402F] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Skip the section to APPLY to; run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How blink Boolean indicator I gave the color in function of

  Hello

  How to Flash the Boolean indicator, I gave based.here of color I have attached my program. I'll given green and blue, but when I run the present it flashes red and blue and red and green.i want to blink blue and green.

  Hi madhanskm,

  Here's what I came with. The value of the Boolean value changes from true to false with each iteration of the loop. You can change the timing of the loop to change the rate at which the led blinks.

  

  It will be useful,

  goffauxs

• How to clear the form after the error

  Hi friends
  
  Use oracle 10 g forms in windows xp sp2, I'm doing a form accepting the user input to the editor only for practice because it is a first time I use the editor and all that just for the test and I need your help. to display the editor when the press operator in the text element, that I use (integrated Show_Editor) then the value entered in the editor will display in the text element, and there is a problem of query by this value. so far it's very well.
  
  If the operator to enter a wrong value the request that I made the alert for this message and I pulled the trigger of the error alert, but after the user press the button in the alert in the event of failure message incorrect value even in the text element.
  
  
  This is the first screen, now I insist in the EMP is
  http://i48.Tinypic.com/28us1l4.jpg
  
  It is the second screen. Here, you need to clear the message and enter a valid value, but assume that you enter
  an invalid value.
  http://i46.Tinypic.com/29pup07.jpg
  
  you get this message if you have entered an invalid value
  http://i50.Tinypic.com/2wg6gj6.jpg
  
  After, I press (OK) in the alert message. How can I delete an incorrect value in the text element
  I tried the clear_form in the trigger for the error, but I get the error
  http://i50.Tinypic.com/1znue1l.jpg
  
  Please show me how I can delete the text without error element
  
  any help or advice, that I enjoyed
  
  Thank you

  Hello

  Just use the following to clear the value of a text element:

   :block_name.field_name := NULL; 
  

  I hope this helps.

  Best regards

  Arif Khadas

• Cannot start Office applications after Windows Update. Clear side-by-Side error caused by the file of damaged

  Windows Update automatically ran yesterday on my Vista 64 Home Premium SP1 system.  Today, I can't run any Office Applications. I get an error popup that says: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »
  I learned how to use Event Viewer and found that a mistake by-side happening and a manifest file has been altered.
  The file is: x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_d08d7bba442a9b36

  Where can I get a clean copy of this file?  It is just a simple XML file.  Do a system restore is not good.

  Hello Astroguy,

  Thank you for your response back!

  Good to know that you have done a repair install.  What I would do is run the SFC scan, because you performed the installation of repair recently the chances are that the SFC scan should be good.  If there is a problem, it will signal you when finished.

  Then I would go to Windows Update to check if he has new updates and/or try to update all those who did not.  If you still get the updates that do not please let us know what he's trying to put up-to-date and error.

  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L755 after error - BIOS update service is not a warranty case

  The problem began when Toshiba Tempro program notified me that I need to update bios for my laptop Satellite 755. I have downloaded the file to the Toshiba site, followed all the instructions. The process - there was error check. Tried twice. The same result. Decided to not update at all.

  But after that the next reboot of the laptop has not started. Black screen, cooler works like breathing.
  After searching the Internet I found there are hundreds of people with the same question. Which of course was not my fault.

  As there is no solution for this - the only way was to send the Toshiba laptop service.
  I wrote them a letter before, provided all the details, what happened. Also asked if it would be covered by the warranty. My laptop is still on warranty, purchased just half a year ago.
  Received an email from to SAV (Damax AG), I have to send my laptop and that * it's still on warranty *.

  Without any hesitation I sent them my laptop.

  After several days, I received a note that:
  1. it is not a case of warranty I was updating the BIOS. Come on guys, I wrote it you before I sent the laptop!
  2. for the repair of motherboard, I need to pay 1350 (!) swiss francs (the price for the new laptop is about 600 Swiss francs!).
  3. I can refuse the repair, but in this case, I still have to pay 100 Swiss francs for diagnostics.
  Why the hell should I pay for the diagnosis, even if the laptop is still on warranty + it was pretty clear what the problem was, like many people in the face of that, and Toshiba service for sure shoud be aware of this problem.

  What could advise you in this situation?
  These are the sons of the same question. I'm sure this is the problem on the side of development of Toshiba.

  http://forums.Toshiba.com/T5/drivers-and-utilities/satellite-L755-S5216-BIOS-2-0-update-leads-to-quot-verify-error/TD-p/203226
  http://forums.Toshiba.com/T5/computer-troubleshooting/laptop-L755-dead-after-BIOS-install-attempt/TD-p/205326
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/BIOS-L755-beware-of-Toshiba-fix/TD-p/270171

  Also, there are many cases that people have written that it is covered by the guarantee - which was one of the reasons that I sent him. For example here:
  http://www.theeldergeek.com/forum/index.php?showtopic=45500
  The guy writes: + "guarantee-box...". 0, no data not deleted, everything goes well =) ' + '.
  How even a service covers it - the other is not?

  Also, I read the guarantee agreement - I have found no info that this case is not coverable.
  Really frustrated by all this, I am a student, and of course I don't have extra 1350 francs to pay for it.
  Also, I'm really screwed as it has research papers which I can not finish normally like all my data on the HARD drive.

  Hello

  Please don t get me wrong, but I don't really know what you want to read here. It is user in the forum and here you will not find an official statement here. All you can do here is to share your experience with others who have the same problem.

  I put t know how many services are listed for your country, but please try to communicate with other services and see if they will tell you the same thing or maybe there's something now about this BIOS problem.

  If you have more information, please report it here. It may be useful for other owners of L755.

• How can I trigger a Boolean control from a Boolean indicator?

  Hello

  I want to trigger a Boolean control (like a button) to a true value as soon as my indicator (LED) Boolean Gets a value of true.

  Can someone tell me how to do this?

  You can use either a local variable or a value of property node to define a control value.

  Right-click on the control and create/Local Variable or Create/property/value of the node. Change the property node or a variable to write mode by right clicking on it and selecting "modify to write." Local variables can default to write (do not remember) but I know that failure of nodes of property for the playback mode.

  I prefer the nodes property simply because they have a mistake in and out, so I can control the flow.

  [Edit:] Remember that you must pass instead of locking for the mechanical action. If you need a locking Boolean control and need programmatically set its value, then you need to reset the State after reading using either a local node or property.

• R52 AFTER ERROR 2010

  Hello world

  I am a newcomer, and I want to say that the information available in this forum are very valuable.

  Thanks to you all.

  I installed a new SAMSUNG HM160HC HARD drive in my thinkpad R52, and I got the MESSAGE ERROR 2010.

  Then I istalled the latest version of the BIOS

  Version: 1.29

  Release date: 2007/02/07

  Install OK, but the installation of the on-board controller Version 1.06 has failed.

  Installation started in the notification of panel indicating wait up to 30 years.

  Nothing else, system hang up at this stage.

  Wait for more than 5 minutes... not able to do anything... includingshut down!

  I had to unplug the power cable, remove the batery!, wait 2-3 minutes, re - install the batery, plug the power cable and start the power on cycle. (crossing fingers after having red the risks associated with the motherboard).

  Everything went well, fortunately, it means the updtate is not started at all.

  Now I'm in the 1.29 level BIOS that requires embedded contrloller 1.06 version but my system is still at the previous level (1.04). So far working well.

  Activate the BIOS Setup then jump 'MESSAGE error 2010 esc' requirement, but error is still displayed.

  What is the risk associated with the use of the BIOS to 1.29 and the controller shipped to 1.04?

  On the forum I found that this problem could be linked to the antivirus program.

  I tried to suspend the "Avira" antivirus but the result is the same.

  You have any other suggestion for upgrading the on-board controller?

  Question: Why don't jump not notification of th 'AFTER MISTAKE 2010' since the warning was notified to the user?

  This warning must be displayed whenever a new version of the BIOS.

  If the user has decided to skip the process of "esc", then the "post 2010" error notification should bypassed whenever the system is powered on, turn off/on.

  I do not understand why different policies are applied to different thinkpad owners.

  I installed the same SAMSUNG HM160HC drive on thinkpad another and I don't have the 'POST ERROR 2010'!

  Thak you in advance

  Hi George,.

  Thank you for your response and I have nothing to say against this.

  I totally agree to ' notifications to customers and awareness "this need for Lenovo to do.

  I was also suggested to limit the notification for the first start-up, the BIOS update.

  Accept the fact that when you go to the option to configure the client to agree on the risk taken by using is not a "certified IBM/Lenovo disk" by changing at the moment the opion "esc" at boot time.

  Can you also please take a look at my second post related to the problem of "embedded controller.

  Thank you

• How have I not the clear search box after a search?

  I've done this before, but I can't find the solution again...

  How can I get the search box clear the search term after I did a search?

  • Searchbar Autosizer: https://addons.mozilla.org/firefox/addon/searchbar-autosizer/

• The sidebar will not clear history, even after deletion of history, how to erase the sidebar history?

  Even after the erasure of history (FireFox 6.0.2) the sidebar history contains a story of friends.

  After you remove each item individually and say things to forget to each site, they all return.

  Any ideas on how to clear the history sidebar?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file

• Unknown battery indicator - 601 error

  I've had this laptop since June of this year and already I get a message saying that the storage capacity is extremely low and he says he should be replaced. the laptop works, but the battery indicator says unknown.

  What is the solution?

  P.S. If anyone suggests to replace, I would like to know one.) This is after less than 6 months and b.) How to organize a replacement

  DragonOrmr wrote:
  

  I've had this laptop since June of this year and already I get a message saying that the storage capacity is extremely low and he says he should be replaced. the laptop works, but the battery indicator says unknown.

  What is the solution?

  P.S. If anyone suggests to replace, I would like to know one.) This is after less than 6 months and b.) How to organize a replacement

  Hello

  Have you tried to test the battery from the HP Support Assistant utility?

  In addition, download, run the utility ofthis autonomous battery test - check if it fails.

  Battery if you're under warranty free of charge.

  Contact HP.

  Concerning

  Visruth