Clear cursors programmatically

Similar Questions

• Create cursors programmatically with custom properties

  Hello!

  I have problems creating cursors by programming in Labview 2009. Basically, I have an image that is rendered as a table. When you press a button, I want about 7 sliders to appear on the graph of the intensity of my image. I then want to read values from the sliders (z-values) and do some calculations base with them.

  The Labview help says to use the CursorList property to create sliders so I understand. I am trying this now, as follows:

  Create the property node and the link to the image. Choose the property of CursorList. Right click and create constant. Then I'm trying out the different sliders with the index of table vi, change their names to 1-7. Then I thought to put their back with the cluster vi version, but it does not work.

  In the future, I would like to set several properties of each slider (and not just the name). What is the right approach for my problem? I did a search on the topic, but nothing useful came. Please point me to a thread that I might have missed.

  Is attached a screenshot of my problem... How to create several cursors at a time by programming with some properties tuned to my taste?

  Thanks for your help!

  Chris

  Kokomoking wrote:

  Hello!

  I have problems creating cursors by programming in Labview 2009. Basically, I have an image that is rendered as a table. When you press a button, I want about 7 sliders to appear on the graph of the intensity of my image. I then want to read values from the sliders (z-values) and do some calculations base with them.

  The Labview help says to use the CursorList property to create sliders so I understand. I am trying this now, as follows:

  Create the property node and the link to the image. Choose the property of CursorList. Right click and create constant. Then I'm trying out the different sliders with the index of table vi, change their names to 1-7. Then I thought to put their back with the cluster vi version, but it does not work.

  In the future, I would like to set several properties of each slider (and not just the name). What is the right approach for my problem? I did a search on the topic, but nothing useful came. Please point me to a thread that I might have missed.

  Is attached a screenshot of my problem... How to create several cursors at a time by programming with some properties tuned to my taste?

  Thanks for your help!

  Chris

  Do not build Bay cluster. Just use build array (programming-> table-> table of generation). Who should take care of your cut wire. When you use the cluster table version, it builds your cluster in ANOTHER group that is not what you want.

  

  The table of index VI is also extensible (click on the lower part of it and drag). In this way, that you don't need 8 of them on your drawing.

• Programmatically add or remove slider

  Hello

  I use slide System Horizontal pointer.

  

  And I want to add the slider programmatically. I know how to add this manual, but I want to add/remove the cursors programmatically.

  

  Could you please help me?

  
  

• How can you tell two different cursors to move to different places?

  Sorry if this has been asked before, but I couldn't find the answer anywhere.

  As I said, I'm trying to get two different cursors to move in two different places on the same graph. I have values I want them to go, I'm not sure that work or the command to use. I'm using LabVIEW 8.6. Thanks for any help!

  WCR,

  You will need to use the property of the graph nodes to move cursors programmatically. The properties of interest are the active cursor and the cursor Position > X and the Position of the cursor > y. use the active cursor to specify (by index cursor) what slider you want to work with, and then set the X property values and, and then adjust the slider according as the active cursor and set its property values X and Y.

  

• Persistence is a persistent storage

  The API says:

  "The persistent store provides a way for objects to persist through the unit resets." A persistent object consists of a key-value pair. When a persistent object is validated in the persistent store, value of this object is stored in a Flash through a deep copy. »

  Means that this storage is "never" destroyed/erased unless I have clear it programmatically? It does not survive a change of battery, for example?

  What I said, she survives everything except the OS upgrades.  The RecordStore will survive everything, including upgrades of the OS, but it is less robust.

  Edit: Also, the previous poster said that it will be deleted if the application is removed.  This is partially true.  If the object that you store in the PersistentStore interface defined in your application, then it will be erased with your application.  If not, he must remain on the device.  So for example, if your application stores a string String will persist even if your application is uninstalled.

• Get comma SQL query result

  Hey everybody
  
  I have a requirement where I need to get result separated by commas to names because there are many relationships that is, for each protocol, there are mutiple people linked to it, and I created the PL/SQL function for this and everything was going well and when he is in the production of several cursors have been opened due to the logic and leading to CARS more and for that we have summer manually clear cursors every weekend and I'm you're looking to create a view, materialized for this logic but I was unable to encode the logic by using Connect by clause
  
  The result is like and I want the names separated by commas for each protocol
  P06065 TESTER13 TESTER13
  P02095 PATRICIA CARMELITANO
  P02095 ANNE MUIR
  P02095 ROBERT HARLOW
  P02095 JANICE ALBERT
  P02095 Jacqueline van Dalen
  P02095 DR. GUENTER HENNIG.
  P05209 Olga Xenaki
  P05553 Birgit Limbach-Angele
  P05553 Anja Dr. Schulz.
  P05553 CHRISTA HAGENBUCHER
  
  Here's the function I wrote, I need to get the same logic through the SQL statement... Thanks for your help
  
  cursor c_GSCR is
  Select T565804. FST_NAME | » '|| T565804. LAST_NAME
  Of
  S_PT_POS_HST_LS T544105 / * S_PT_POS_HST_LS_Protocol_Team * /,.
  S_CONTACT T565804 / * S_CONTACT_Protocol_Team * /,.
  S_CL_PTCL_LS T541903 / * S_CL_PTCL_LS_Protocol * /.
  where (T541903. ROW_ID = T544105. CL_PTCL_ID and
  T544105. POSTN_ID = T565804. PR_HELD_POSTN_ID and
  T544105. ROLE_CD = 'Lead project manager' AND
  T541903. ROW_ID = v_PTCL_ID and
  T541903. PAR_PTCL_ID is set to null, and T544105. END_DT is null);
  
  BEGIN
  l_row_num: = 0;
  l_role: = ";
  l_role_list: = ";
  v_PTCL_ID: = PTCL_ID;
  
  C_GSCR OPEN;
  If C_GSCR % isopen THEN
  LOOP
  FETCH C_GSCR INTO l_role;
  When the output C_GSCR % notfound;
  
  IF l_role_list IS NULL THEN
  l_role_list: = l_role;
  ON THE OTHER
  l_role_list: = l_role_list | ',' | l_role;
  END IF;
  
  END LOOP;
  CLOSE C_GSCR;
  end if;
  
  ~ Srix

  Hello

  You can try something like this:

  select loan_code, rtrim(xmlagg(xmlelement(e,loan_tran_code||',').extract('//text()')),',')  as loan_tran_codes
  from  st_lo_trans
  where st_code  = 24
  group by loan_code
  

• Fire graphic cursor move event programmatically

  Is it possible to programmatically trigger the move bar graph event?  Assign a value to the Index of the cursor or the property node Cursor Position does not seem to do.

  Create a user and set up the case of the event which handles the cursor movement to handle that event as well. Then fire this event when the data updated?

  Ben

• Firefox automatically clears the address bar and leaves the cursor in the address bar whenever new web page is open

  whenever I have open a new tab, or open one of my favorites in an existing tab or new, after a second or two, the address bar is completely cleared, and even if I clicked on a new text box or you press the space bar to scroll, I believe that it would start typing in the address bar. It started just past today after I restarted my computer.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to programmatically clear the Image display control in LabVIEW 2010

  Hello...  I need to do what I say in the title above...  I went here,

  http://digital.NI.com/public.nsf/allkb/514FD61A5F1829EA86256DF6004FDE13

  and bother to follow the directions.  I am, moreover, work in snapshot mode.  So I followed the instructions to clear the display of the Image when you are working in the Snapshot mode, but it didn't work.  Either I'm doing something wrong or maybe (as the instructions seem to imply) that this example was written for LabVIEW 7.1 and 8, but perhaps not for LabVIEW 2010?  Hard to say, but can someone help me understand how to clear display of images (IMAQ/Vision).  I just want to be able to clear an existing image before implementing a new.  How can I do this in LabVIEW 2010?

  Thanks bob...

  Hello Paris1_

  Make this change:

  

  You write the constant Source image in the display of the images, but the Source image is already displayed.

  Select a constant vacuum image to clear the display of the Image.

  

• Programmatically trigger cursor output?

  Hello

  I use the framework of the actor to develop a large application in LabVIEW. I have the sliders on a graph that trigger data be filled by actors using a structure of the event and a cursor output event. The data are also met (initialized) when the program starts.

  I currently do this initialization using a structure below and a change event of value on the "Init": Boolean

  

  also described here:

  http://forums.NI.com/T5/LabVIEW-idea-exchange/add-first-run-event-on-event-structure/IDC-p/1044975#M...

  The problem with the help of the 'init' Boolean is that I duplicate the same code in two events: "init": value change and "graph": output cursor events (the event two do exactly the same thing).  Does anyone know how slick combine these the Init event with cursor output event so that the cursor output event fires start? That way I wouldn't have to duplicate my code in two places...

  I've searched and have not found exactly what I needed, sorry if this has been covered somewhere in the forum.

  Taking place your common code? In case the Structure? Could register just for two events:

  

  Or to register for the event separately to send it to the nested actor:

  

• How to clear the Ref Cursor runtime error

  Hello everyone,
  the code as follows

  create or replace 
  procedure Country_sel(key in varchar2)
  as
  cc Res_RelcountryLan.countrycode%type;
  len Res_Language.langname_en%type;
  lid Res_Language.langid%type;
  ab Res_Language.Abrivation%type;
  type refcursorr is ref cursor;
  cur refcursorr;
  d_stmt varchar2(100);
  begin
  d_stmt := 'select RCL.countrycode,RL.langid,RL.langname_'||key||',
  RL.Abrivation from  Res_RelCountryLan RCL inner join Res_Language RL ON RCL.LangId = RL.LangId';
  open cur for d_stmt;
  loop
  fetch cur into cc,lid,len,ab;
  if cur%found then
  dbms_output.put_line(cc||lid||len||ab);
  else
  exit;
  end if;
  end loop;
  close cur;
  commit;
  end  Country_sel;

  When I run this code im getting

  ORA-06502: PL/SQL: numeric or value error: character string buffer too small
  ORA-06512: at "RASOOL.COUNTRY_SEL", line 11
  ORA-06512: at line 6

  can you please help me get rid of this problem.
  
  
  thanking you,
  Prakash

  
  d_stmt varchar2(100); 
  

  Increase the size of d_stmt. Your an a larger string assignment

  
  d_stmt := 'select RCL.countrycode,RL.langid,RL.langname_'||key||',RL.Abrivation from  Res_RelCountryLan RCL inner join Res_Language RL ON RCL.LangId = RL.LangId'; 
  

  The size of the string above is more than 100 characters.

• Can HopeHow I clear (programmatically) a XY graph

  I hope it's a simple question.  How no one erases a XY Chart at the beginning of a program?

  Hi RDL.

  graphics are erased by wiring tables empty, graphics are erased by plugging in empty tables at a property node 'story '!

• reset the cursor lists by program

  I'm trying to clear the list of cursor that is on my chart programmatically.  When I wire up an empty array to the cursorlist property, it does not and the sliders must in the list on the screen.  Someone knows how to do this programmatically?

  I do not know this for you, but you can watch the other properties as annotation lists...

• Site not showing with precision cursor

  On my website bxcell.com cursor home page of the Web site visualizes with precision. It is supposed to be a slider full page. It works in all browsers except Mozilla. More recently, he appeared with the updated version to 42.00. I tried to disable all extensions/plugins, and of course to clear all cache. The error is still there.

  Hmm, the style sheet http://bxcell. com/wp-content/themes/Divi/includes/builder/styles/frontend-builder-style.css?ver=2.5.3 contains this rule:

  .et_pb_slider { position: relative; overflow: hidden; }
  

  If you disable the overflow: hidden on this div, the slider rule extends to the entire width. But... which shouldn't be necessary. I can't understand why this div does not extend to any of the default width. Perhaps a question to the author of the theme?

• Text cursor moves back

  I want to preface this by saying: I'm on Firefox Beta for Mac OS X Yosemite 10.10.4 was last updated.

  For about 2 days now my text cursor back at the beginning of the text box when I start typing. I have seen it happen on Twitter, the Web of WhatsApp and Medium (which is the worst offender, by typing completely backward). I know that being on the beta, I would expect a bug or two, but I don't think that something like that could pass through.

  Does anyone know a fix for this? I foresee only staying on beta until 40 Firefox comes out, but I would still do not pull my hair until then.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes