Clicking on CD Rom problem

Similar Questions

• I click on "Fix a problem with the NVIDIA graphics driver" and he says: "this solution could not be downloaded.

  I click on solve PC problems (the flag) and it says address a problem with the NVIDIA graphics driver. I click it and it says:

  This solution could not be downloaded

  --------------------------------------------------------------------------------

  The most likely causes:
  Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  --------------------------------------------------------------------------------
   
  I am connected to internet, and the works, works etc of web browsing of windows update. Why it is not downloading the solution?

  Download and install the latest driver for your graphics card nVidia.

• Error code 19 - CD/DVD-ROM problem. Please help and read the description first!

  I tried to load my games such as rollercoaster tycoon on my computer by inserting them into the disc drive. Nothing happens. I went to toautoplay and it had all the right settings I wanted. I changed several times and tried to re - insert the disc, but nothing has happened yet. I thought it was a problem of CD/DVD drive, so I went to 'Computer', right-click on Vista64 (C :) and selected 'properties'.) I clicked on the Hardware tab, and then on HL - DT - ST DVDRAM GS20N, my CD-ROM/DVD-ROM drive. I realized quickly that there was a problem, because the box said"device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.» (Code 19) «. I looked at the code 19 on the support Web page and found a link to a Microsoft Fixit, Windows Powershell 1.0. I installed the program, he ran through and he said that he had fixed the problem. I inserted the game once more, but still nothing happens. I went to my CD-ROM/DVD-ROM drive once more and he said that the problem was not resolved. I don't know how to solve this problem. Help, please! (It is not just the CD I try to insert, because none of the many CD I tried to use will work). Should I try to restart my computer?

  Hi meluvcheese22,

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.

  To resolve this problem, you can follow the methods below:

  Method 1:

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article:How to back up and restore the registry in Windows:http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

  You can check the link below: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116

  Method 2:

  a. Click Start, type devmgmt.msc and press to enter. The Device Manager window opens

  b. expand DVD/CD player and right click on the sub element and click on uninstall.

  c. restart your computer.

  d. open Device Manager, click Action,

  e. click on scan for hardware changes. Follow the instructions.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Packard Bell Easynote laptop computer CD Rom problem in Vista

  I have a Packard Bell Easynote laptop computer and the CD rom does not recognize my DVD - RW drive, it recognizes and plays all other formats, any ideas how to solve this problem?

  Russ

  Hello

  Close all programs and then put in a DVD - RW blank = what happens?

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and may your reading/reading on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite click mini camera rear problem

  Hello! could someone help me please. 10 rear camera no longer works after upgrade and installation of windows. What will I do to solve this problem? Help, please. Thank you

  Click on the Mini - fix driver camera
  ------------------------------
  This has two cameras:
  -"Front" is a webcam above the screen low resolution. I think that this example uses an OV2722 sensor.
  -"Backwards" is a camera of higher resolution in a corner of the white species. I think that this example uses an AR0543 (Intel Avstreams camera) sensor
  When I got the Mini click (Win 8.1) only the rear camera worked. After the upgrade Win10 worked only the front webcam
  -previous discussion forum below gave me enough information to solve the problem.

  1. in the Device Manager there are three relevant entries:
  -under the heading of imaging devices, there is a single entry for "Signal imagery 2400 processor"
  -under system devices there were two entries: ar0543 OV2722 sensor camera and camera sensor Unicam
  2. the driver for camera sensor Unicam ar0543 is OK (10/07/2015), but you'll have to let him search online for updates from the other two.
  -With camera sensor OV2722 there simply a updated driver from 2014 to 2015/06/15
  -With 'Processor of Signal imagery 2400', it will update the driver (to 07/04/2015), but the entry of imaging devices becomes "Intel Avstreams Camera.
  3 Win10 then you ask to restart because there has been a change in material.
  -After that the camera application has an additional button that lets switch you between the two cameras, and both work very well.

• Satellite click on Mini - some problems after installing Win 10

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Posted by bilou24an199
  

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Wow the GUY you described exactly the same problem as me...
  If anyone can help that would be great.

• P10: DVD / DVD-ROM problems

  Hi guys!

  Hope you can help, probably something stupid, I forgot. I have the P10 series with a Combo DVD - ROM SD-R2412 type. I recently put a new installation of the op (XP) system by using the system restore disks. Since then, my cd drive reads DVD movies and normal cd but not DVD ROM such a DVD - ROM games. Any ideas? Windows XP sees it as a CD-ROM/DVD-ROM drive, but that's all.

  Thanks in advance for any help

  Hello

  I'm not sure but I think that your device has a DVD - RAM drive. I have the same drive in my Satellite and everything works perfectly. I really don t understand how something like this possible is especially after the reinstallation of the operating system with recovery CD.

  I put t know if you use the original games store or some houses burned. Try to use many different DVD media to know what problem one makes.

• How to reopen a thread on this forum after I clicked "this solved my problem.

  I clicked on a "this has solved my problem" in this forum, and now I can not re - open. I don't want to just post a thread in duplicate because: -.

  (A) which would be boring
  (B) it would give the impression that the problem has been resolved.

  Here original thread:- https://support.mozilla.com/en-US/forum/1/684156#threadId687462

  This has happened

  Just once or twice

  I just reset the status of the thread for you.

• Super CD DVD ROM problem in 1000-1140tu laptop...

  Hey guys... I need a favor to ask... I use 1140tu notebook, but after update by this updated formware (PLDS Optical Drive Firmware update) my ROm is not identify the CD... any help please?

  Thanku for help... I just did it's ok... It was a problem for lenses cleaning... I cleaned my lens and its CD of detetcting now... Thanks for your time btw

• CD-ROM problem with my satellite 230cx

  Hello I have a satalite with a duel fdd and cd-rom 230cx, the problem is my wife formatted the computer but no back up the sys drivers etc, she introduced the laptop second hand and had no os disk backup, in any case I used a boot disk windows 98 to start the machine and it loads fine until it comes to load the cd-rom that It seems, it cannot find the drivers for the CD? , I get an error come up say the found device MSCD001 driver, the floppy drive is fine, hope someone can help me with this problem.

  Hello

  It seems that the standard driver on your startup disk does not match the drive unit. You will need a driver.

  You can also try using the companion disc!

• A fix with one click for Windows Update problems - how to reset the Windows Update components?

  I can't check, download or install updates through Windows Update.  Help!

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the button below and follow the instructions.

  
  Solve this problem

  For more details on this solution, read the article here.

• Windows XP Cd-rom problems, code 19 error__

  I tried almost everything in the registry, and that has not worked. Including the removal and reinstallation. The code and the exclamation mark is still there. I don't know what else to do

  You can transfer your question in the Forums XP; http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP where the XP experts will be happy to help you.  And give them the whole issue with all the details that they will not be able to help you with what you have posted here.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• I have CD Rom problem

  I have problem of CD Rom. I did inestalled window 7 and he inestalled corectlly, and also I've played two CD too after inestillation. but when I want to play the cd or DVD, the CD Rom after two second open automatically and ask me (insert a disc). I tried deffirent CDs and DVDs, and again, I have the same problems, now how can I solve my problem of CD Rom?

  I have problem of CD Rom. I did inestalled window 7 and he inestalled corectlly, and also I've played two CD too after inestillation. but when I want to play the cd or DVD, the CD Rom after two second open automatically and ask me (insert a disc). I tried deffirent CDs and DVDs, and again, I have the same problems, now how can I solve my problem of CD Rom?

  Try the following application: -.
  Fix it

• by clicking on the links problem

  Why when a receive an email with a link and click on it once he said "operation has been cancelled on the computer control admin for the parameters.

  Is the e-mail program, you have not mentioned Outlook?
   
  You receive an error message when you click a hyperlink in Outlook
  http://support.Microsoft.com/kb/310049
   
  This operation has been cancelled due to restrictions in
  http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions
   
  
  Microsoft Office Outlook Forums can be found here
  http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=all