Clicking on storage under houses errors

Similar Questions

• I HAV been trying to update my expiration date of credit card for 3 months.  When I go to lelien for "Update payment Details" and edit the expiration date and < click > save, I get an error saying my address in invalid.  I have several chat sessions

  Can someone please help...  Suggestions, how can I overcome this problem, in which case my Adobe Creative cloud subscription will expire today due to and credit card.

  I tried to update my expiration date of credit card for 3 months.  When I go to the "Update payment Details" link and change the expiry date then < click > save, I get an error saying my invalid address.  I had several chat sessions with support, called support and logged a ticket with support and every time they tell me to go to a particular link to update my contact information.  I do and I get the same error...   "My coordinates are not valid."  Now I'm in the position where my creative cloud membership will expire today everything simply because the Adobe address validation do not think that my address is valid.

  I got 'Cat' sessions with the support,

  I made a phone call to the support and

  I logged a ticket with support.  I'm really trying to pay my subscription.  Support ticket No. 0216009991

  Whenever I have contact the support they gave me a link to the site where I supposedly can I enter my credit card details.

  Whenever I went on the link provided, I'd get the same error.  "My coordinates are not valid."

  What I checked on my address.

  1. I look out the window and the view I get is the same as it was yesterday and the day, and in fact several years ago.

  2. I go out in the street, Yes, the street sign says the name of my street

  3. I go to my mailbox and it does not say the number of my mailing address

  4. yes I get the email to the address registered with Adobe

  5. yes I received the email from adobe delivered to the address

  6. I get the address of Google, yes I can find it on Google

  7. I converted to use the satellite view Google maps

  8. Yes, it's my house, with the 12 solar panels on the roof

  9. Yes, that's my black car in the driveway

  10. I check my reviews for my address Board rate, Yes, this is the address that I recorded with Adobe

  11. Yes, I had this same address registered at Adobe for the past 3 years.  So far I have not had a problem with my address

  12. I work with a software company that actually uses the address of Google, under license validation, built-in in their application.  I used this software to check to see if my address is recognized as valid.  You guessed it is recognized as valid.

  I did check my credit card

  12. Yes, I have, every time checked the status of my credit card with the Bank

  a. the card is valid

  b. the card's not over it's credit limit

  c. the card is not due

  d. the address registered to my credit card with the Bank is the same address that I recorded with Adobe

  Since the last link Adobe support gave me two weeks ago, to change my credit card details, I was able to key a new credit card in the fields (Yes it's good that I was forced to get a new credit card only for Adobe!   If I am that everything would be fine.

  But wait...   The details I provided this link have not been updated on the Adobe site.  (So I check the link... I was scammed to get my card number?)

  After investigation of the link, I'm fairly confident of the link provided is a true link to Adobe.  www.adobe.com/go/Secure

  Did anyone else had this type of problem when you try to update the expiration date of a credit card?

  The question is about to have an impact on my ability to process pictures for my photography business, it affects my ability to earn an income.

  So you could say I'm getting angry some of the stuffing!

  In summary...  I knew that my credit card had a new expiration date and I tried to update the expiration 3 months 3 months.

  Simply because the use of the validation of addresses, Adobe, has a few flaws, I was not able to update this information.  So Adobe today will stop my subscription.

  As I said in previous support tickets, chat sessions and telephone.  I'll be more disappointed if I am prevented from using software and Adobe cloud features.

  It is copied from an email I received during the night from Adobe...

  Continue to create with us

  Hi Thomas,

  Your Creative cloud membership will expire on August 23, 2015 (PT). We hope that you have been getting the best out of all that creative cloud has to offer. To extend your subscription, please update the billing for your account information, or add a prepaid card.

  Update your billing information (there is a link to where I can update the expiry date) pocztek sigh...   I still get the same error telling me that my address is not valid!

  Thank you for being a part of the creative cloud,

  The creative team Cloud

  Good creative team...  I REALLY WANT TO STAY IN THE TEAM, AS YOU CAN SEE FROM THE FOREGOING, THAT I REALLY TRIED TO SOLVE THIS PROBLEM SEVERAL TIMES OVER THE PAST 3 MONTHS.

  I tried to include as much information as possible in what I said earlier, I expressed in a way that will hopefully provide a little humor, but at the same time to portray the frustration I'm feeling right now.

  Honestly, I don't know what more I can do.  It seems that I have no other recourse start litigation for loss of income coming from Adobe address Validation errors.  There is a real chance that I will be litigated against because I won't be able to complete contracts.

  There must be a healthier solution of mind that court proceedings.

  Kind regards

  Thomas Croll

  (Tom)

  Tom, let me some time. I I will get these verified case and will contact you.

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• Cannot load games 'Titanic', 'Travel' - no message just a flicker on the screen, then the game stops. On "Death on the nile" error - latest version of directx. On 'Peril at End House' error - last need direct 3d.

  I have win7, Windows Home premium 64-bit on an HP Pavilion Elite I - 7 core intel and Gateway screen (fx2300). After the last update for windows and ATI, I had problems to read my games - some don't is not loading, some give me access violations, others do not go full-screen. Oh, now I can no longer adjust the resolution of my screen for anything other than the highest or lowest values acceptable (everthing in between is blocked).  I have supported the ATI update several times, but it takes to watch TV in hd. I worked with HP to install and reinstall the ATI update and update of the last window. Whenever errors are different on my games. Initially, they were access violations and some games would not work, I have the update and reinstall it and other games would get the access violation? Now I can't load games 'Titanic', 'Travel', 'Nancy Drew - lights camera curses'. -No message, just a flickering on the screen, then the game ends. On "Death on the nile" error - latest version of directx. On 'Peril at End House' error - last need direct 3d. I have directx 11. All my games worked at the beginning of April. .  I have directx 11.

  First thing to do would be to check the compatibility of the individual games that you are trying to play the Windows 7 Compatibility Center.

  Here is the link:

  https://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Then, DO NOT ever update the drivers through Windows Update. Always install the drivers from the manufacturer's website.

  Is your Windows 7 install an upgrade of Windows Vista?

  Titanic, travel, etc. - are these games, bigfish, BTW?

  If so, contact them.

  I feel ultimately that your user account may have got corrupted somehow.

  Create a new user account and check if you can play the games there.

  If so, fix the damaged user account.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• I can't open the speech recognition in Word 2003 - I click on Word under Tools, nothing helps. What's wrong?

  I can't open the speech recognition in Word 2003 - I click on Word under Tools, nothing helps.  What's wrong?  If I go to the Control Panel, under regional and Language Options, the button is grayed.

  Hello Stephen,

  Please see the following articles:

  How to install and configure speech recognition and handwriting in Word 2003

  Using speech recognition for the first time in the Office

  Frequently asked questions about speech recognition for office functionality

  How to install and configure speech recognition in Windows XP

  How to use speech recognition in Windows XP

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.

• I double clicked on update of programs and I wonder now run a legacy cpl high. When I click ok it says script errors and nothing works.

  original title: run a legacy cpl high?

  Hi all. on my control panel I double clicked on update of programs and I wonder now run a legacy cpl high. When I click ok it says script errors and nothing works. If I click on details until I click on continue it says; "C:\Windows\System32\RunLegacyCPLElevated.exe" Shell32.dll, Control_RunDLL "C:\Windows\system32\ISUSPM.cpl",Program updates I'm not very technical and well I tried to look on the search engines, I can't find anything to help me.

  Hope someone can advise me please

  Thank you aypee74

  I figured how to stop my warning high. I just got an answer and it reminded me that I now know why my computer was giving this prompt. This may help a bit there. So I decided to write.

  In my case it was my 'Sigmatel Audio Control Panel.
  I had disabled "allow reconfiguration pop ups".
  This will make the warning "Run a legacy CPL high" lights up to chance that your system can access this audio program. Once I've rechecked. The warnings went away unless I open the control panel. But it's a normal warning according to the manufacturer of my computer.
  Some of you may have something much more serious, but for the few who becomes confused by the latter and have this audio driver, this may help.

• When open cc and click on download apps get error message

  When open cc and click on download apps get error message

  Download error in the applications tab of Creative Cloud Desktop Application

  https://helpx.Adobe.com/creative-cloud/kb/download-error-apps-tab.html

• Impossible to pass to Windows 8 on my ENVY 6 (1053er) - No. Storage Drivers found error

  Cannot install Windows 8 on my new Ultrabook. Get the error message " error has occurred during Installation, the system will be restarted" to try to update via the installer under Windows

  I tried to burn the ISO on a USB media (cause obviously Envy6 isn't a DVD player) and I tried to make the day & clean installation, making who has not worked or the other. I've got zero of the partitions on the disk selection window and could not find storage error message drivers.

  I tried to download various packages on the site of HP support for storage/disk hard/that it is, extracted for the key in separate folder, but still Windows has not found something there.

  Any help? Thank you.

  HP Envy 6 Ultrabook - 1053er

  #ACB product number B6H36EA

  Installed system: Win 7 Home Premium x 64

  Then, I got this problem and already on... Ta-da Pro 8 Win!

  The key issue is a key - USB loading in UEFI mode (right?). In which Windows could not do anything. I pressed F9 at startup and selected USB Drive Legacy (or sth like this) and everything worked like a charm.

  Thanks again for the fast support!

  PS > Oh yes, I also disabled ime quick start before doing this, as indicated in the manual...

• by clicking on find printer displays error "The Active Directory Domain Services is currently unavailable" I am on a network home windows 8

  When I use word and the products that come with it, I get the above error message.  Then the print job does not print.  Have you tried a lot of bugs, but none have worked.  Help, please.  I'm pulling my hair out.

  Hi Ibilofsky,

  Clear printer spooler files and activate the spooler service and check if the number fixed.

  Step 1

  (a) press the Windows key + R, type "Services.msc" (without the quotation marks) in the Open box and click OK.

  (b) double click on "Printer Spooler" in the Services list.

  (c) click on stop, and then click OK.

  (d) press the Windows key + R, type %WINDIR%\system32\spool\printers in the open window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.

  (a) open services and right - click the Print Spooler service, and then click Properties.

  (b) under the general tab, next to startup type, make sure that automatic is selected.

  (c) if the service does not, under Service status, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Check the status of the issue.

  It worked perfectly.

  All installed printers came instantly. No need to reinstall the printer etc drivers they worked already well before the show. It was a spooler problem.

  Thank you.

• Intel Rapid Storage on Raid0 error help

  At startup when the screen flashes all the disks on my system, it shows an error on one of the drives in raid0.  When the Win7 finally load the Intel Rapid Storage notification in the hidden icons bar presents a problem.  The Intel Rapid Storage of opening of the status bar shows this:

  

  I always open the videos I saved on the Board of the new media projects and do not understand what means the error message.  As far as I know, it still works.

  Any ideas on that?

  Thanks for your help.

  James

  I had some problem a long time ago, I forget exactly the error and the situation, but I think it was a failing hard drive. Make sure that your backup is current before you do anything else to fix. If there is a problem with the structure of raid, you might be able to rebuild the raid and it works again ok. you could also try to click on the reset to normal disk, or try the check and repair function... If this is the beginning of the problems with this drive, it can continue to cause problems or fail completely one day.

  Here are some manuals from intel and you can look through their forums for similar problems.

  http://download.Intel.com/support/chipsets/IMSM/SB/irst_user_guide.PDF

  http://download.Intel.com/support/motherboards/Server/RAID_vol_recover_proc.PDF

  https://DuckDuckGo.com/?q=RAID+Intel+rapid+storage+solution+error+disk+failed+site%3Acommu nities.intel.com

• vCenter tabs views of storage and hardware error

  When you click on the tab views of storage in vCenter, I get an "internal error occurred" and no information is displayed. Any ony met this error?

  See if any of these help:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2015964

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2007280

  It has never worked? Is this a new installation or an upgrade?

• When I right click "save image under" on a JPG file, I get no response at all. How can I fix?

  I use Firefox on Linux (Fedora 20, KDE desktop) 34.0. I checked on the Mozilla download site and it says I have the latest version. When I right-click on a JPEG file to save it, I get the option ' save image under... ". ", but when I select it, nothing happens. The file will not download. I have searched google fixes and tried all of the following characteristics, by supporting documents Mozilla, all with no change in the response:
  -Change the download folder
  -The relevant preferences in the about.config folder reset
  -clear history of downloads
  -Run Firefox in Safe Mode
  In addition, I checked in the preferences that the jpeg image is set to "always ask".

  All other references to this problem seem to refer to problematic plugins, but safe mode control reveals this is not my problem. Any idea what the issue might be and how I can fix this problem?

  Save the Image under does not work? Try turning off just the add ons that affect downloads.

  Please consider the following to determine if the profile is corrupt: use the Profile Manager to create and delete profiles Firefox

• Suddenly, * only with Firefox * display all the computers in the House (error code: ssl_error_rx_record_too_long) trying to access any Google product.

  Today, all the laptops in the House (last FF ver) started throwing the error:

  (Error code: ssl_error_rx_record_too_long)

  Trying to access any Google products: gmail, Google + Analytics, Google Web site, etc.

  
  

• Windows XP freezes for 2 minutes after clicking on start - &#62; shutdown (DCOM error?)

  Windows XP hangs for about 2 minutes after I click on start-> stop. So it takes 2 minutes to XP display the shutdown options.  I checked the event viewer, and it seems to point the problem to some sort of DCOM error. I have provided a screen shot of this error in the event viewer. Unfortunately, it is in Finnish, but it is essentially saying that 'a server (981... '. A4D) could not save with DCOM in a given period of time)

  

  Looks like a lot of unnecessary services on your pc... To change, go to run, type:

  services.msc in msc, scroll through, double-click one, review its properties...

  In addition, to give the stop or restart the pc, a faster time, go to run, type: regedit

  In regedit, expand: HKEY_CURRENT_USER/Control Panel configuration/locate & L.click on

  AutoEndTasks, go to edit, modify, set to 1 between 0 and family on regedit.

  This gives faster response, but the problem lies in the performance of services, Msconfig

  also gives details...