Windows XP freezes for 2 minutes after clicking on start - > shutdown (DCOM error?)

Similar Questions

• Windows 7 crashes 5-10 minutes after the game starts!

  Whenever I load my games that all crash after 5-10 min I have all new drivers and all games are compatible... PLEASE TELL ME WAT I'M DOING

  Hi LZYGA09,

  1 you get an error message before or after that you get the black screen?

  You can try the following workaround to find the root cause of the problem:

  Please check if you are facing the same question when working in safe mode.
  Step 1.
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  Step 2
  If the question had existed in Mode safe, make the boot minimum troubleshooting to find the root cause of the problem:
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  2. I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW

• My laptop keeps freezing a few minutes after opening.

  Data sheet:

  Acer Aspire EA40_HC model E1

  with Intel Core i3-2348 M @ 2.30 GHz CPU processor

  and Intel HD 3000 Graphics

  Windows 8 Pro

  RAM: 4.00 (2.58 GB usable)

  System type: 32-bit operating system, x 64 based processor

  ========================

  One day, I was playing CS, everything's fine, it works well, I know that my pc is not the best for playing games, I'm running with fps constant of 40-60 which is not obtained, but not bad either. I removed my battery of laptop, but kept plugged in because I know that if you kept it loads during use, it can decrease the life of the battery power. A few hours later in the game, my laptop just turned off. I don't know why, maybe the charger has been moved and unplugged then I checked. He was actually plugged in nice and safe, and I don't think it was the cause of the laptop to turn off or maybe it was. Then I turned on my laptop. Every thing seems fine but the 'Welcome' screen any longer that it was. A minutes and continues the 'welcome' to display. I know something was wrong because who usually took only a few seconds to load. I turned off my pc and opened it again. Nothing had changed, it is still stuck on the Welcome screen. So I waited a little longer, now 3 minutes, I saw the circle of loading thingy is frozen and non-mobile.

  I'm a little worried that I just broke my laptop, I tried a few corrections in the internet, but I can't find. I went advanced startup settings and did a system restore and choose the settings of only a few days.
  The system recovery succeeded. I restarted my PC, I was so happy that I fixed it, for so I thought it was. I open Google chrome, but as soon as I pressed the Enter key everything froze. Same office does not. I restarted my pc again. The start-up took a little longer. After going on the office a few minutes later the pc simply froze again. I can't do anything. I've been waiting so he could meet again for 10 minutes and still frozen. I restarted my pc and was able to put it in SafeMode before it froze again. And everything works fine in safe mode. I can still surf the internet but can't actually play cs: go in what is sad. I can still play undertale but which is nice. When I put back it in normal mode, it keeps freezing after a few minutes.

  If someone out there who can help me understand what causes this and how to solve my problem I would appreciate it a lot! :)

  Too long and did not read?: my PC turns off suddenly, when I boot it its stuck at welcome screen upward.

  Did a system restore and solved the problem but now it keeps freezing and not responding do not.

  Set it in safe mode and everything is fine but only limited.

  Read for more details.

  Hello

  Games can be hardware intensive (graphics, etc.) and your problem seems to come from a special combination of games and an accumulation of dust in your laptop causing it to cut.

  It may be an overheating problem and it is normally the main reason for your problem.

  .

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

  Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons for your problem:

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  _______________________________________________________

  Safe operating temperatures of criticism:

  "What should be the temperature of my processor in the computer?

  http://www.computerhope.com/issues/ch000687.htm

  @@@@@@@@@@@@@@@@@@@@@@@

  It is difficult to know what is the cause of the gel.

  It may be a number of things.

  But to rule out a software problem as follows.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• Windows 8 freezes during or just after the start

  Hello

  I have a machine to window 8 which has been upgraded to windows 7 and worked perfectly well for several months until last week. It started to freeze during or just after the start in a minute or two.  It works fine in safe mode

  • I tried a lot of things already that is disable all non-Microsoft services, and that did not help.
  • Refresh the PC while keeping the files and settings and who also did not help.
  • Tried sfc/scannow, which did not help
  • Virus search

  Restarted a few times OS and said, I met dpc_watchdog_violation. But no other information.

  Advise the pl

  Hello

  I don't know any list of the differences between starting and Normal. I think you can try to disable Microsoft Services in MSConfig, but it's just a guess.

  There is a box to check in MSConfig to create a log, but I know nothing about it, or where it would be stored.

  If everything worked at some point, there must be an update of a certain type involved...

  I suggest that you try to post the question to the TechNet Forum... Anyone know of this problem...

  http://social.technet.Microsoft.com/forums/en-us/w8itproperf/threads

• Activation of Thunderbird requires more than TWO minutes after clicking on icon Thunderbird.

  PROBLEM: The Thunderbird program is slow to activate. When you click the Thunderbird icon, I expect Thunderbird Inbox screen to appear in a few seconds. However, after clicking on the Thunderbird icon, more than TWO minutes elapse before the Thunderbird screen appears. This problem existed for about a week. My OS is Ms 8.1. You can provide any help would be appreciated. Also, when this problem started, I received the following message "warning: this file is being processed.» Please wait until processing is complete, to pass messages. »

  Your anti virus (or attempt to Microsofts Defender grant) needs to be said is not to analyze the profile of Thunderbird folders, each time you open the program is my guess. The program cannot open files that are locked for scanning. As some of the files may be in the order of 4Gbv in size, it can take an AV program up to 10 minutes.

• Key 3 C often does not work for several minutes after the start, the other keys work fine.

  I got am HP Pavilion 17-e049wm Notebook PC product #E0J75UAR for about 4 weeks now.  I bought it refurbished.  A week ago I started having this problem.  3, e, d and c keys do not work when I first start the computer all of the other keys work.  Nothing happens when they are pressed.   Sometimes I will restart the computer and they work again, other times they won't, but often will start working if I left the computer set for about five minutes after the start.

  The computer is spotlessly clean.  I've only used a dozen times or more.  Nothing has been spilled on the keyboard.

  Sounds like software for me, but what?

  I am running Windows 8.1 and no programs are running at startup, with the exception of a program start button, but the problem began weeks after installing that.

  Any ideas?

  FWIW, I called hp. They believed excluded material and had me do a full system restore. Problem persists... The things you own end up owning you they say... I guess it's doubly true if you own a hp laptop. Full day turned... One day closer to death. Thanks Obama.

• General failure on Ping and TraceRT by WAN IP for 15 minutes after startup

  My Windows 7 64 of Profession will expose this problem.

  After startup, it cannot access anything whatsoever outside the local network.  I can ping, DRC and usually access anything whatsoever on the local network, including the router.  But trying to access what anyone outside the LAN does not work.

  Ping Returns the Timeout on the first response, and then general of failure for the other three.

  Tracert immediately returns a general failure

  I am ping IP address, no domain name, is not a DNS problem.

  After 15 minutes or, the problem resolves, and starting the machine works fine.

  Occasionally (once a day or more), it will return to the problem of General failure for 15 minutes, then return to normal.

  The problem does not occur in safe mode with network.

  The problem occurs whether the user is logged on the machine.

  I have disabled the Windows Firewall to try to resolve, without success.

  I also installed McAfee.

  Thanks for any help that anyone can provide.

  CP71

  I would start by removing McAfee and using MSE at least to test.  You can not just disable McAfee, it should be removed and he is known for this type of problem.

  McAffe often contributes to BSOD

  
  

  I remove and replace it with Microsoft Security Essentials

  
  

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

• Why my drive hard Boot keep reading and writing for 20 minutes after the start?

  As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.

  10.10.5 OS version

  Model: Mac Pro

  ID: MacPro3, 1

  Processor: Intel Quad-Core Xeon

  Number of processors: 2

  Total number of cores: 8

  (Vivid RAM) memory: 8 GB

  Any help will be greatly appreciated.

  Thank you.

  Check Console.app and see what happens.   Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.

• Menu text freezes on the screen after clicking

  Hello!

  Whenever I click on an option in Photoshop CC, the menu button is frozen on the screen. I will attach a few pictures to better illustrate the problem.

  This is my screen after the opening and closing of a file. The respective part of the menu remains frozen on the screen:

  

  After clicking on a plugin button in the menu "filter":

  

  

  It happens every time on any button. The only way to erase the screen-ahem, the only way I know - is through the control panel screen resolution. I just have to go to a different resolution in both directions, and it works. The thing is, this bug will come back as soon as I use the menu, which is, thus, very often because I rely heavily on some plugins or actions with no shortcuts.

  I have Windows 7 64 bit, an ATI Radeon HD 6500 M graphics card and a Bamboo of Wacom tablet.

  I have to guess a video driver problem (upgrade from AMD site), or a utility program that mess with menu design and has a few bugs.

• Windows 7 freezes for McAffe install__

  My new laptop with Windows 7. It crashes when I try to install McAffe Total Protection. I ran Norton Removal Tool and turned off the firewall before installing, but it always does. I have to do a system restore to get restarted windows. A have or have had a similar problem?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Birth of Nations no longer works after clicking on start a game/battle saved previously.

  I played Rise of Nations. I am running Windows 7. I have an Intel Pentium T4500 of processor, Intel GMA 4500 M, 3 GB DDR3, 320 HARD drive memory. If you need more information about the system, I run that I have pretty much everything. The problem that I am facing is when I save the game and close in the middle of a battle. I come back and either click on continue the game or load game saves and it evokes the game and the game objestives. However when I click on start the game crashes or stops unexpectedly. Also, I get a message saying that Microsoft will contact me when a solution is found. I am becoming very frustrated. I tried DL'ing possible patches for games and forums scouring for corrections and solutions does not. Help, please!

  You have the latest patch installed?

  Rise of Nations Update v1.03 http://www.Microsoft.com/games/PC/riseofnations.aspx

• Windows Vista 64B for Service Pack 2 failed to start

  I've updated Windows Vista 64 b for Service Pack 2 and I get a blue screen when I start my Dell Labtop. Windows Vista automatic updates to phase 2, and automatic restarting leads to a blue screen again. After continuing in Mode safe mode with networking, stage 3 is installed automatically. Message: update not correctly configured back shanges. A new cycle with automatically updates configuration. When restarting a meesage appears: Windows failed to install the important updates. Start the computer again, the message is: Windows has recovered from unexpected shutdown. Windows can check for a solution of the problem. I check the box and Windows plans an another automatic update which leads new blue screen. How can I get out of this loop? Service Pack 2 does not work for me. Emil

  I don't have a system restore function on my computer.

  The problem seems to have been resolved by replacing the video driver that has been done by Mrs support. So far, the automated configuration update has worked and no new boot failure took place.

• Windows 7 freezes for the right click devices and printers don't is not loading

  I support for a local photography studio and built all of their computers. One of their photo editing machines faced some weird problems I can't solve.

  It is currently running Windows 7 Ultimate 64 bit. About two months ago the mainly the user complained that a right-click on a folder or a file on the desktop would cause the computer to freeze. She also noted that devices and printers would not have been responsible. We finally just did a clean install of Windows, and that seemed to fix the problem...

  .. .for a while.

  About two weeks, the same two problems returned, now it is intermittent. The user declares every morning, she has him restart the computer several times, but then everything works very well for the rest of the day. But while it comes in the next morning, and it does the same thing.

  I tried manually reset the BIOs, turn on Bluetooth Services (even if that computer does not all bluetooth devices) and play with Windows registry a bit, but because the problem is not compliant, it is very difficult to solve.

  I don't know if it's a hardware or a Windows problem. All the tracks would be greatly appreciated!

  Check the report viewer for all errors that occur.

  Clean boot the PC and redo the test

  Run a memory test and a test HD