CLIE on windows 7

Similar Questions

• error CLI vSphere Windows 7

  installed vSphere CLI on my new Windows 7 computer with powershell 2.0 and receive the below error:

  vSphere cli error internal Windows PowerShell. Initialization of COM

  Failed while reading the Windows PowerShell console file with error 80010106.

  are they not compatible yet?

  Thanks for any help.

  It works if you launch PowerShell and then type "Add - PSSnapin VMware.VimAutomation.Core"

  =====

  Carter Shanklin

  Read the PowerCLI Blog
  [Follow me on Twitter |] http://twitter.com/cshanklin]

• vSphere CLI - perl.exe - Unable to locate component

  Hello

  I installed the vSphere 4.1 CLI on Windows Server 2003 SP2 (x 32) and when I try to connect using the vicfg - nas.pl it gives error below. W2K3 x 32-bit is supported according to the vSphere CLI document. I don't know where he's going wrong then.

  
  Perl.exe - Unable to locate component

  This application has failed to start because libxml2.dll is not found. Reinstalling the application may fix this problem.

  
  Any suggetions would be appreciated.

  Thank you

  Installation of Perl is not in the Path environment variable. To the Path environment variable, add the following location:

  I think that the installation of Perl is not in the Path environment variable.

  C:\Program VMware VI CLI\Perl\bin remote

  -Right click on my computer
  -Select properties in the context menu
  -Select advanced system settings
  -Click the Environment Variables button
  -Select the path in the System Variables and click on change
  -Add the following line «;» "C:\Program VMware VI remote CLI\Perl\bin" to the Path variable

  Restart the command prompt for the path access is taken into account

• Can break the link is no longer a NIC with CLI 4.1

  I've recently upgraded to 4.1 CLI (VMware vSphere CLI - 4.1.0 - 254719.exe) and I found that the command to disable a vswitch network card no longer works. If I go down to CLI 4.0 U2 (VMware vSphere CLI - 4.0.0 - 253290.exe) the command works again.

  Is the command that I am trying

  vicfg - vswitch.pl - unlink vSwitch0 vmnic3

  Under the 4.1 CLI it returns no error, it just says:

  Update of uplinks: vmnic1, vmnic0, vmnic2, vmnic3

  and vmnic3 remains linked to vSwitch0. If I go down to 4.0U2 CLI the command works as expected and vmnic3 is dissociated. The command to bind a network card for a vswitch works well under both versions of the CLI.

  I've been through the upgrade/downgrade with the CLI cycle a couple of times and got consistent results. Anyone confirm that NIC untie is today broken with CLI4.1

  Details

  Running CLI on Windows 7 64 bit against a host ESX 4.0U2

  The reason why this happens is a problem with the input that is passed into the splice of the Perl operator. Looking at the source between 4.0 and 4.1, looks like they were a bug fixing and looks like they change the wrong section of the code.

  excerpt from esxcfg-vswitch 4.0 to disassociate a teddy bear:

  If ($bridge-> isa ('HostVirtualSwitchBondBridge')) {}
  If {($add)
  Push (@{$bridge-> {nicDevice}}, $pnic);
  } else {}
  my $size = @{$bridge-> {nicDevice}};
  for (my $i = 0; $i<$size; $i++)="">
  If {($bridge-> {nicDevice}-> [$i] eq «$pnic»)}
  Splice (@{$bridge-> {nicDevice}}, $i, 1);
  last;
  }
  }
  If (@{$bridge-> {nicDevice}} == 0) {}
  Delete $vs-> {spec}-> {bridge};
  }
  }

  excerpt from esxcfg-vswitch 4.1 to disassociate a teddy bear:

  bug # 376670
  If ($bridge-> isa ('HostVirtualSwitchBondBridge')) {}
  If {($add)
  Push (@{$bridge-> {nicDevice}}, $pnic);
  } else {}
  my $size = @{$bridge-> {nicDevice}};
  for (my $i = 0; $i<$size; $i++)="">
  If {($bridge-> {nicDevice}-> [$i] eq «$pnic»)}
  Splice (@{$bridge-> {nicDevice}}, $i, 0);
  last;
  }
  }
  If (@{$bridge-> {nicDevice}} == 1) {}
  Delete $vs-> {spec}-> {bridge};
  }
  }
  }

  It is the junction takes 3 arguments, a table for arg [0], in compensated for arg [1] and the number of items to remove from arg [2]. If you look at the updated code 4.1, change the number of items removed from 1 to 0. This causes the change table draw and so you see that no vmnic is removed. If you change from 0 to 1, you will have the problem solved.

  What is even more surprising is where VMware has decided to change the code... If you look at the next 'if' statement, he said if there is 1 left vmnic of the table, go ahead and deleted... which is not what we want. The change should have been if we have 0 vmnic in the table, then the user must mean deleted the vSwitch and it looks like VMware engineers made the change in the wrong place.

  If there is value to vCLI 4.1 to take advantage of the new vSphere 4.1 capabliteis, this is the only change you need to do until VMware offers a real solution.

• Remote CLI for ESX4i?

  This is my first experience with 4i and am embarrassed to ask this question, but where of the remote CLI (Windows EXE) for ESX4i?  I can find version 3.5, but I can't locate it for vSphere / ESX4.

  I'm usually not this hard to find things, but whether he is pretty well hidden or I'm hacving a bad day.   Until I can find it I think I'll use the vMA.

  Thank you!

  No need to be embarrassed, that it is not always easy to find downloads for some of these tools.

  For vSphere CLI for Windows/Linux, you can download at: http://www.vmware.com/support/developer/vcli/ you also have the possibility to use the vMA as you mentioned to the: http://www.vmware.com/support/developer/vima/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Esxcli source code available?

  Hi all

  I have a new in vSphere world and I downloaded and installed the "VMware vSphere CLI" for Windows.

  I see that there is an esxcli.exe and an esxcli.zip in the bin folder and in the zip file, it has compiled python files.

  So I was wondering, if the source code for esxcli is available somewhere, could you please provide me a link to it?

  Thanks in advance for your answers.

  Best regards

  Christophe

  Without the source code for esxcli is not available, is there a particular reason you want it?

  Also with the way esxcli works, you would not find much use for code client side as all the "meat" is on the side server. The nice thing about the esxcli architecture is the customer esxcli basically asks a host ESX (i) and according to the available commands, he will dyanmically present them to the customer so when you go to a host ESX (i) 4.0, 4.1, or 5.0 hosts, you will see a different set of command made available compared to coding the logic side client to manage the different versions/etc.

• PhoneGap CLI 6.3.0: App generation fails for windows - plugin - push - 1.8.2

  Hello

  We are using Phonegap CLI 6.3.0 and face following error for windows (via build.phonegap.com) build

  Error - error Plugin (you probably need to remove plugin files in your application): retrieve the plugin '[email protected]' via the Installationavecuneracine NGP "phonegap-plugin-push" to "1.8.2" for windows update appxmanifests ToastCapable = true... Cannot install 'phonegap-plugin-push': error: can not find the module 'C:\cygwin\tmp\gimlet\ < ID > \project\platforms\windows\cordova\lib\AppxManifest' to Function.Module._resolveFilename (module.js:337:15) at Function.Module._load (module.js:287:25) at Module.require (module.js:366:17) to the require (module.js:385:17) at module.exports (C:\cygwin\tmp\gimlet\< ID >\project\cordova\plugins\phonegap-plugin-push\hooks\windows\setToastCapable.js:5:24) at runScriptViaModuleLoader (C:\Users\Administrator\AppData\Roaming\npm\node_modules\pgb-plugman\node_modules\pgb-cor dova-lib\src\hooks\HooksRunner.js:187:18) to runScript (C:\ Users\Administrator\-AppData\Roaming\npm\node_modules\pgb-plugman\node_modules\pgb-cor dova-lib\src\hooks\HooksRunner.js:165:16) to C:\Users\Administrator\AppData\Roaming\npm\node_modules\pgb-plugman\node_modules\pgb-cord ova-lib\src\hooks\HooksRunner.js:133:20 to _fulfilled (C:\Users\Administrator\AppData\Roaming\npm\node_modules\pgb-plugman\node_modules\q\q.js: 787:54) at self.promiseDispatch.done (C:\Users\Administrator\AppData\Roaming\npm\node_modules\pgb-plugman\node_modules\q\q.js (: 816:30) can not find the module ' C:\cygwin\tmp\gimlet\< ID >\project\platforms\windows\cordova\lib\AppxManifest'-vous can fix that...

  Someone knows what's the problem? Maybe missing something in config?

  Thanks in advance,

  Unfortunately, it seems that the generation of the plugin hook is not supported by generation.  You can try using 1.8.1?

• PGB CLI 6.0.0 - .aspx package does not pass Windows validation dashboard developer

  There is also a related post on the forum community phonegap, but insofar as no solution. That's why I write it here as well, because at the time our deployment in the Windows store is pending.

  We will have a problem when you use CLI 6.0.0 on phonegap build. The build works very well without any problems, but when we download the .aspx package in the dev.windows.com dashboard, the following errors are given (some content are vetted with *):

  Invalid package name identity: 4974de88-* (expected: *)

  Invalid package name: 4974de88-* _ * (expected: *)

  Invalid package Publisher name: CN = OrangeMason BV (expected: CN = *)

  This package uses a display name that you have not reserved: *.

  As far as I know, phonegap build do not specify the name of the identity, the family name, the name of the editor and display the name of anywhere? Or is it possible that we can define these in the config.xml file so that they are treated properly in the package?

  If not, does support for this will be added in the future or how the Phonegap crew we publish our application in the Windows store otherwise wait?

  By the way: when you use CLI older versions (which exports .xap), this problem does not occur. However, these CLI versions do not support Windows Phone 10.

  Thank you for this comment. We have deployed a couple of bugs, here's how you need to configure your application:

  Publisher name: will be set to what you have set the field in the config.xml file

  Full name: will be what you have set the field in the config.xml file

  Identity package name: added a new preference: windows-identity-name. get this App--> App Identity management value in the Dev Center

  Package name: must be generated based on the name of the identity

  Yes, as long as you have your Publisher on man ID and follows the correct values in your config.xml (sample below values) file:

  Adobe
  PhoneGap Build App
  
  

  presentation should be successful. Let us know if you still see errors.

• Windows 7 64-bit and Sony Clie SJ22

  Hello

  I've browsed the forum and looking for a way to synchronize Clie my wife for Windows 7 64-bit.  I followed the advice here and bought a USB infrared adapter.  I could synchronize with it before the upgrade.  I have no professional but my machine doesn't support virtualization so I can't synchronize in XP mode.  I installed palm desktop 4.1.  When I try to sync, I get an error on the handheld:

  "Cannot start the HotSync operation because the port is currently in use by another application"

  I would try Palm Desktop 6.2, but I don't think it will work with the customer, and I'm not sure what I need to do to make it work.

  Any suggestions would be greatly appreciated.

  Thank you

  Trent

  After some research I have it works I discovered "port is in use..." it was a common mistake with IrDA synchronization by this faq IrDA.   I had to disable the beam receive and perform a soft reset.

  I was also able to install Palm Desktop 6.2, then install PalmHotSyncSetup a free download of Pimlico software, which allows 6.2 work with legacy devices.  I discovered that from here: http://forum.brighthand.com/showthread.php?t=261651

  So, I was able to sync and backup device.  However, it is horribly slow.  What was a few seconds under XP takes 10 minutes.

• Need help how to make "Foglight and Performance analysis CLI - Windows Installation of" because my FMS_HOME is in Oracle. Please notify.

  Please guide me the Foglight command-line installation as I'm not sure how can I continue because my FMS_HOME is in Oracle.

  It seems you are trying to install Foglight agent manager by using the command line installer to ensure the follow-up of your Oracle database.  Foglight Oracle agent can be run either on the Oracle server, or another place as a remote agent locally.  As an agent remote is most common.  In general, this isn't your office, btu a server.  The FMS or another utility server.  You would normally run the installation program from the command line on the computer you want to monitor Oracle of.  Then the agent would run there and collect information of your Oracle instance.  You also mention the analysis of performance in the subject of this thread.  For Performance analysis, which must be a local installation on your Oracle server, but it's a different Installer than indicated above.

  Jeff

• Satellite M70 - CLI - cannot install display or SM Bus controller driver

  Hello

  I have a Satellite M70 - cli PSM73C-CL100E and I got a new hard drive and loaded Windows xp. I went on the Toshiba site and downloaded and installed all the drivers. I have no problem with the wifi atheros, the sound, modem or chipset drivers. I also updated the bios v2.10 all successfully.

  The problem is with the video card. I used huntersoft program and know that the chipset is an ATI. He also says it's an ATIradeon xpress 200 m with 128 MB DDR shared video. When I try and install the ATI driver it says Setup could not complete the installation. Try to configure your graphics card with the standard vga driver.

  I spent hours on the net. I tried the ATI L30 XP driver and it does the same thing. I tried the driver ATI radeon xpress 200 m and it says not found material. I don't have the original CD I know he works as the old drive worked fine. Unfortunately, I wiped as well to put in a laptop more old. I should have gotten the drivers out of it. :(

  Does anyone have an idea? It drives me crazy! Thanks for any help. Marilyn

  Hi mjmx4,

  How have you tried to install the display driver?

  Normally, you can install the driver (screen) If you run the setup.exe file that comes with the driver package. Follow the instructions on the screen thanks to the installation of the driver, the driver will be installed.

  Alternative you can install the driver if you go to Device Manager and right click on the graphics card. Choose update driver and use advanced installation where you can choose the directory and the driver yourself.

  By the way: before starting with the installation of the driver, you must install Service Pack 3 for XP.

• Problem restarting audio IDT on Windows XP (DV3-2150EP)

  Hello

  I followed the guides on this forum to downgrade my laptop (DV3-2150ep) for Windows XP and I have the last problem: the driver IDT audio. The original driver on the site of HP drivers for this laptop did not work because the helmet kept silent when the socket is connected. After experimenting with different versions of the IDT driver, I found a working version (SP46918), but my situation the following:

  -The devcon is necessary to restart the Microsoft UAA to mount devices IDT show after each connection, but that's OK.

  -What I can't solve: even if I do the thing with the devcon, a update manual (forced) device is necessary to reinstall the sp46918 driver files from Device Manager to get the audio up to-and-operational.

  1. is there an idea that the driver IDT done when he is obliged to update? In this case, I can write a script to perform the same operations of each connection.

  2. is there a tool to automate a peripheral forced update of command line? I tried a lot of tools to backup/restore of devices without success. Only DriverMax works, but it doesn't have a CLI interface. :-|

  3. any other solution found by others?

  4 install Vista. :-((((((

  Thank you

  kecsap

  I have to apologize, it turned out that I had F05 or F.06 instead of the latest version of the BIOS. Earlier I have not updated the BIOS as the changelogs have shown no related audio enhancement. I have reflashed the machine under Windows XP (However it is not recommended to several places, but I had success with that), and that's, audio in Windows XP started to work perfectly with the SP46918 without hacks.

• ThinkPad T440s - updating windows 10

  I have a T440s that has been upgraded to windows 10 about 6 months ago. After you have installed a new brother printer yesterday, the machine unbootable. It goes just to repair auto, then diagnosis, nor necessary. I tried several system restore points, but sr always fails saying it cannot copy the registry.

  I ran the diagnostics of lenovo equipment that breaks down in the reading test targeted the HDD with bad sectors. I backup all the data (which is on the SSD drive?) manually from the command prompt cli (which still works) before doing anything else. next planned step is to run the bad sectors). I wonder if bad sectors are where the registry (or its backup) is stored, and if so, then 'fix' the bad sectors will destroy the registry up to the point where I have to do a refresh.

  This is the first time that I am dealing with a system with a drive hybrid ssd (for startup & os hd for storage. given that it was originally a machine 8.1 will be running the windows update back 10 windows, and if so, he'll know where to write the files of bone regenerated to the ssd and hd?)

  Edit * I forgot to mention that the s.m.a.r.t said diagnostics portion the drive is fine. ***

  any suggestions appreciated.

  I do not know what causes these things, but ultimately, I decided (since I had a full backup of the data) run the bad sector thinkpad. He fixed the bad sectors, managed to recover enough of what was stored there so I could run the system restore, and now the phone works again.

  who knows?

• software for sony clie PEG-SJ22/E on a sony vaio 32 bit

  Need software for sony clie PEG-SJ22/E on a 32-bit sony vaio computor

  Hello

  If you are referring to Windows 7, the PEG-SJ22/E device is not compatible.

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Sony+Clie+PEG-SJ22+16MB+Color+Handheld+PDA&v=Sony&uid=PEG-SJ22U&l=en-US&pf=6&pi=2&c=Communications+Devices&sc=PDAs&vd=all&os=64-bit

• Cli.EXE - Application error at startup

  MPSampleSubmission

  Dear Sir.

  Greetings

  When I start my computor then I get this massage. "Cli.EXE - Application error" Please can you help me what I need to do or how to remove.

  Thanks for all your support.

  Thank you & best regards

  Hinda

  Hi Syed Hassan,

  1. What is the full error message that you receive?

  2 did you recent hardware or changes to the software of the system?

  CLI.exe files are used for the ATI catalyst driver programs, that work with the ATI graphics card.

  Method 1:

  If you have installed the ATI graphics card on your system, then try to update the latest version of the drivers for video card and check if the problem persists.

  AMD support & drivers

  How to manage devices in Windows XP

  Method 2:

  If you still experience the problem, you can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to complete the clean boot.

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in the article above to configure Windows to use a Normal startup state.