Client light HP T5740 + Broadcom Crystal HD BCM970015
Hello
I have the HP T5740 Thin Client, and I want to install Broadcom Crystal HD BCM970015 a half height mini PCIe card.
question is do I have PCI Expansion Module AZ551AA Express4x or it can be installed without it?
can not find documentation on the motherboard, which slots are available, where to install the Broadcom Crystal HD etc...
Thank you
Just open it and see. There is a Mini PCIe location to downtown, which was originally scheduled for a WiFi inside card. With the t5740 worm 1.04 BIOS update, the Mini PCIe slot was authorized to accept cards like the Broadcom Crystal HD. The older BCM970012 is a card full height and does not. The BCM970015 is a half-height card normally but Amazon sells a Variant that is full height. Don't buy that. You want the card half height card support with full height. Simply remove the stand so it will be good in the t5740.
Here is an example from BCM970015:
Tags: HP Desktops
Similar Questions
-
NB 305 & broadcom crystal hd card
Hello.
Looking to buy one of the NB305 netbooks but I wanted to check if there is anyway that these can play H.264 encoded mkv files. I know that the pinetrail CPU would probably hurt, but I read that the broadcom crystal hd card can work around this problem. Would the NB305 screed with this card because it requires a free PCIe slot? Guessing there is no possibility to buy the card with the netbook as you can do with the dell mini 10 and the hp mini 311?
See you soon.
Post edited by: pompeypirate
Hi mate
I don't see any reason why you shouldn't be able to watch and play H.264 encoded mkv files.
The files may be slightly larger because of the high resolution definition but and simply VLC player (small tool to release) should be able to read this file> Would be the NB305 screed with this card because it requires a free PCIe slot?
. No.. You cannot insert, upgrade this laptop with any other PCI cards
It is not possible. -
Install Adobe Reader on my Client light t510
Trying to figure out how to add Adobe reader to a Client light t510. I have never userd a before and my boss likes to give me new challenges.
Hello
They run Microsoft Windows Embedded CE 6.0. No facility available for Windows CE, BUT you can still read PDF files:
Silverlight for Windows Embedded The power of Silverlight to create rich applications and the Windows Embedded CE user interfaces Internet Explorer integrated Internet Explorer with panning and zooming capabilities and a customizable interface to optimize the browsing experience on devices Flash Lite Browser plug in to make multimedia Web sites Touch and movement Engine plug-in to activate the natural input capabilities and gesture animations Connection Manager Infrastructure technology to manage multiple network interfaces on the device Microsoft Office and PDF viewers Applications to Microsoft Office Word, PowerPoint, Excel and Adobe PDF content on the device QQ Messenger Client side device to connect to the popular instant messaging service You need not do anything.
Kind regards.
-
client light t5740 - agent HPDM
Hello
I was wondering if someone could remember where HPDM agent (for a thin client of t5740), specifically 4.3
device recently returned repaired with HPDM version 4.5 HP, however this doesn't seem to be compatible with the version of HPDM (4.3) on the server.
search for the error code: 14000052 gave me this idea, but others thoughts most welcome.
Thank you.
turns out that the bios of the thin client is not able to boot from a USB pendrive of 64 GB!
a 2 GB key has worked — first time, no problem!
moral of the story is - keep these keys GB 1 & 2... they can become useful at some point.
see you soon
-
HP t620 Flexible Thin Client: Windows 10 IoT Ent. Client light-load Multi Touch
Customers light t620 (Std/MORE) running 'Windows 10 IoT Enterprise for Thin Clients' supported multi touch? Or alone only?
Having a hard time finding a definitive answer online.
Thank you
The answer is Yes.
See Page 5... http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04312126.PDF
"Smooth, immersive experience with technologies like advanced multi-touch and Windows® 10 applications"
-Keith
-
We plan to implement thin clients for workers of the telephone operators.
I try client t5545 light, but the sound of the headphones is not good.
Anyone have some experiences with audio on HP thin clients, and who has (RAM?) is important?
Any other thin client?
Thank you very much
I did extensive testing with audio, not on thin clients but on zero clients featuring the Teradici 1100 cpu.
These tests are performed for the sole purpose of me wanting to support our current deployment of the VDI softphones
Before 4.6 and fw teradici 3.3.0 view it as a dead-end, bidirectional usb audio is not supported.
Now with the release of 4.6 and Teradici FW 3.3.0 (3.3.1) view bidirectional usb works sound, tho he is not completely without problems.
Status with the analog driver teradici:
The analog driver for the chipset teradici works and has fairly good audio quality, although the microphone to cancel randomly a few times a day.Status with USB audio:
USB audio works and has a great compatibility with many sellers of headphones, I failed to find one that does not. Although there are some quality problems, for example if you open a window, say microsoft outlook and start dragging around, you and the person across the phone will get many klicks and choppyness, the same thing happens if you scroll a very graphic intensive pdf document or do you something that requires a lot of attention from the cpu/storage. In win7, this isn't a huge problem tho, it is quite manageable, but it would be really nice to get rid of this problem.Jakob
-
Client light configurations... HOW!
Dear community of VMware,
Please this post if it was answered elsewhere (just a link to where he answered enough) one excuse, but I can not figure this out for the life of me.
First of all, let me mention where my small media/production company uses VMware products.
At present, we have a small collection of IBM servers, running (x 2) all hearts Xeons, 16 GB of RAM and attached to the promise vTraks via iSCSI. They all run ESX 3.5 and have several invited computers that host our e-mail, web server system and one dozen other specialized servers that work for most of the essential production owner application.
We will be soon retiring these machines for those newer / faster, and I want to use them at home for administrative staff offices.
I read several whitepapers touting the benefits and successes of the use of VMware to offer environments of office throughout hospitals etc.. How do? All items are very low on the technical details, and all the details of VMware are all bearings and no architecture.
(1) what software is used on the server? I guess it's ESX 3.5 on a single server, and then another machine manages, distributes and provides sessions. Is this good?
(2) what are the people who use the light client side? If I use normal PC with Windows XP, then load the guest operating system, that the only advantage of the use of VMware, the solution is management, which is not very convincing as a solution.
What I'm really trying to do is to minimize the cost of the deployment of 20 desktops throughout our office, and a light low-cost customer solution is extremely attractive. Using VMware is preferred because I want to offer different operating systems to each Member of the staff like Linux / Open Office will work very well for 70% XP and clients for the 30%. I also want to each Member of staff to have their 'own' environment.
I am not advocating a complete consultation because it is something I would expect someone to charge (and I really believe in paying consultants), but maybe it's a white paper that is detailed enough that I'd be capable of establishing a test environment, so then I could present the idea to other people in society.
Thank you!
I thought you wanted to provide Linux virtual desktops to thin clients... not virtual Windows desktops to Linux customers any.
Yes, Linux supports RDP client-side.
Virtualization is a trip, so this project is still ongoing (as it's more for many virtual infrastructure)
Massimo.
-
HP t620: client light t620 automatic reset by default/settings
Hey everybody,
Ive been working on my new thin client (t620) recently and everytime I restart my thin client it resets to settins/factory default, everything is deleted.
ive tried to watch anything in the settings but nothing on it.
any help ?
Thanks in advance!
New student.It is a unit of WES?
If Yes, you must first disable the write filter and then enable the write filter after that you made these changes or to use the file-based write filter and add the modified files / registry.
Otherwise no change is saved after a reboot when the write filter is enabled.
-
VSphere client light web - cannot select boot from ISO via the CD/DVD drive
I had used P2v to virtualize a Windows 7 machine and after the start he said that the "the boot selection failed because a required device is inaccessible. I think I need to run a repair using Windows 7 image and possibly launch a fixboot and fixmbr, but when I try to adjust the settings of the virtual machine using the web client to boot from the ISO it displays an error and the ok button to save the settings is grayed out. How is it doesn't let me do this?
Never mind. I got the VM running in Vsphere client while trying to change the setting in the web client.
-
List of fixes included in the client light weblogic 8.1.5 8.1.6
Hello
Where can I get a list of the fixes included in 8.1.5 and 8.1.6 the weblogic jms client updates?
Thanks in advance.Generally, it is in the section known and fixed issues:
http://eDOCS.BEA.com/WLS/docs81/notes/issues.html#1296016I see nothing specific to JMS there but then you may have to contact Support to get the complete list of fixes.
-
HP t620: remote management of client light t620
Hi all
Recently, Ive received the task to set up a remote connection to my workstation to a server or a desktop computer.
From what ive seen and read, I need the Manager devices HP to do all this.
I would like to manage and configure my workstation remotely.
-hp t620
-WES 7
the problem is right now, I have no idea where to start and what to do.
guides or can someone help me?
It would be great.
Thanks in advance!
New student.HP Device Manager is one of the (free) ways to remote installation units.
You can find the software and additional information with this link:
HPDM Admin Guide:
FTP://FTP.HP.com/pub/hpdm/documentation/AdminGuide/4.7/
Best practices white papers:
FTP://FTP.HP.com/pub/hpdm/documentation/whitepapers/4.7/
For installation, it is suggested to install HPDM Version 4.7, then Service Pack 2:
-
Hola amigos tengo hacer una cominicacion as client server TCP/IP, puedo hacer communication is y show en both docking UN arreglo booleano, pero quisiera poder control el arreglo desde ambos extremos hired el proyecto as tengo, lo hago are in el servidor tengo unsa series of switches, that al presionarlos en el arreglo UN lights led, y también en el client lights pero quisiera poder también encenderlos desde el client.
Hola
The client-server config you permite hacer UN básicamente ask y desplegar information, (ver este link)
Are examples with the comunidad donde varios you sugiero buscar todo lo what can, como el EPICS Client & Server
Saludos
-
Hello
We have configured the client light ssl VPN on ASA 5510, I can open the web page secure but I get the error attached.
Is - this means that we buy the digital certificate. ?
Kind regards
Nilesh
Looks like Java problem. Try downgrading the version of java Update 16 or below
-
Thin client JDBC - IP source address
I see the program in session $ v as JDBC Thin Client. I need to know where the connections are coming from (source ip address).
I reason to assume that the only way I'll be able to see who is not in the views v$ but traces of sqlnet server-side to activate?
Thank you
Jacqueline wrote:
Hey, thanks for the replies. It is a database 10g running in a RAC 11g cluster.
Yes this is level 3 - end user connects from browser to the Web site, site Web running java code (or maybe the browser activates a java applet, although I doubt that - I don't know the complete development environment) and connects to the db via jdbc client light.
I see some server names, in v$ session.machine - probably that they are web servers, so maybe that's all I'm going to (same as IP really as they are internal servers)-as for the end user, I expect that they will have to use for this httpd logs
Thanks a lot for helping me to focus on this
If you wish / expect end user IP #, then the application MUST be modified & WEBSERVER must participate to get & send the IP # of the end-user; because the WEB server is the only device that is in direct contact with the end user.
-
t5740e: has no task _Capture Image
In collaboration with Device Manager 4.6, using the model _Capture Image to capture an image from a Client light t5740e.
I got the name of the Image, Description, not using the Advanced Options "Cached Imaging," finished "result save as a template" then save as... to create the actual model used on the device.
I dragged the wire to the t5740e device model and what follows is the result:
2016-05-23 12:31:02 sent successfully the task to the device management gateway
2016-05-23 12:31:04 task has been retrieved by the Agent.
2016-05-23 12:31:07 Capture image in the master repository.
2016-05-23 12:31:07 IS NOT SUPPORTED!
2016-05-23 12:31:07 the common task cannot run.
2016-05-23 12:31:07 ErrorCode: 14000052, detail of error: unsupported task.
2016-05-23 12:31:07 the common task cannot run.
2016-05-23 12:31:07 ErrorCode: 14000052, detail of error: unsupported task.
I checked from the Client light t5740 that I had access to the shared folder on the server where the master of Respository\Repsoitory, and I could create a folder and delete it.
When I was checking that he has need of my credentials to connect to this place.
I'm running the HPDM 4.6 from the server where the repository is.
I'm not finding any documentation on "NO SUPPORT! in this case means, which is not supported?
Thank you for your help
Your SMB configuration is perfect. The FTP protocol that is missing is the reason that caused the failure of the Update Agent.
HPDM 4.4.3 is the first version, we support the protocol SMB - with DM Agent version 4.4.3660.14029. For all Agent DM earlier than this version, you must do the upgrade with FTP.
-In your case, the version of the agent is 4.4.3660.12652 which is earlier than 14029.
Once you have updated the Agent to the latest version, you can disable the FTP protocol and use the sharefolder by needs.
Maybe you are looking for
-
Why is it so difficult to find an email to report a phishing scam?
I can't believe that the iTunes store is not an easy find lnk to report scam emails. Most large companies have this to protect customers, I have not found one to report an email sent to my mother in law. I hope this is something apple can fix in a
-
I have professional window XP and I said that my product key is not good.
original title: I have window XP Professional And it keeps telling me that I can't use my product key its not good. Please I need help the code is * removed product key * I just got this new of ebay thanks
-
Purchase a new battery for hp dv4-2045dx
Hello I have a computer notebook hp pavilion dv4-2045dx. Unfortunately, the battery has stopped working, and so I want to buy a new hp original battery. The battery is called "REPLACEMENT-LB73" and it works on 10.8V and 55wh. I not found yet any batt
-
Merge several video files into one (fastest option)
Hello everyone.I was wondering if there is an easy way to join several video files using a first/Media Encoder (or another tool?)I mean other than import in a project, by adding them all in a timeline and making everything again."Why not do just that
-
How to locate a X 86 driver to install on W7 computer? According to me, which will facilitate printing remotely from my XP laptop.