client PC is not accessible

Similar Questions

• Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

  Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

  I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

  I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

  There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

  The only program I installed XP mode is this one.

  Thank you.

  Hugh Humphreys

  Hi Hugh Humphreys,

  Leave the password empty section and see if the XPMUSER can be accessed.

  Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

  (a) Firstly, disable the integration features.

  (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

  (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

  (d) log in Windows by using the administrator account and the password.

  Note: The password is empty by default unless you already set a password.

  (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

  (f) choose the user you want to change and click 'reset password'. Set a new password.

  (g) click on "Advanced" tab, click on the button "Advanced".

  (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

  (i) check the "password never expires". Click on 'OK'.

  (j) then exit the settings and restart Windows XP Mode to normal mode.

  Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

  (b) set a password for your current user.

  (c) click on tools on Windows Virtual PC, choose enable integration features.

  i. type the password, check the box "Remember my credentials" and click OK to open a session.

  II. after joining the domain, logon in XP mode with the local administrator account.

  Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  If this does not work, post your request in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• -name of the server is not accessible you could are not allowed. I used windows server 2003 and windows xp as a client, the error is delivered in windows xp

  -name of the server is not accessible you could are not allowed. I've used windows server 2003 server and windows xp as a client, we use workgroup

  comed in the client error when we open the Working Group

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 1702i AP clients cannot ping their getway where other subnets not accessible by customers

  Please can someone help with this problem

  I have an AP 1702i on MC 3850 catalyst, wireless clients are assigned DHCP in the pool is created on the MC 3850 catalyst.

  They can not ping gateway so other subnets not accessible by clients.

  Pls attach your config 3850 to check

  Rasika

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

• "Cannot access working group on some computers running XP - ' < name of working group > is not accessible. You might not have permission to use this network resource ".

  I have a home with 4 PC network - one of them is running Windows 7 Home Premium (with homegroup disabled) and others running XP Pro.  The XP machines is called 'Server' and the server and the computer services browser running and set to automatic.  Two other computers, called "Notebook" and "Dell", as well as the machine Windows 7 have no file and sharing printers enabled and have specifically the Server service is disabled.

  My problem is that one of the two XP client machines cannot access the working group.  Let me be clear about this: I open Windows Explorer and click on "My network places"-> "entire network"-> "Microsoft Windows network", there is then a second 5-10 break and then my workgroup name is displayed.  When I click on the name of the Working Group, there is another ~ 10 second pause and then I get a message that says error " is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have permissions.  A device attached to the system does not work. ', where is the name of my group to work for other days, after some of the computers are restarted, I find that the XP client has absolutely no problem with that; but the other now has this same problem.  In other words, the problem going on between two XP clients.

  Let's analyze: I have Windows on all PC firewall and any other firewall program.  I tried to disable the Windows Firewall and my anti-virus (temporarily), program without effect.  This may not be a problem with the way I've set up my actions because the error occurs when I try to click on the task force rather than a shared resource.  This cannot be a problem with a specific XP client because at different times, each of the two PCs worked perfectly without any changes of configuration made between the two.  It could be a problem with the server settings; but I don't see what it could be.  I tried editing

  HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters and changing

  IRPStackSize from 21 to 45, then 50.  I also tried to change the size of 2 to 3.  I restarted the server and the client XP and had no effect.

  I don't have the same account of user configured on all three machines.  However, this cannot be the issue because the problem occurs when I click on the task force, before the server name is still displayed.  In addition, each of these two XP clients have connected with their existing user accounts at times.

  I tried the Wizzard of configuration network running on all four machines, without effect.  I tried a lot of things, most of which I can't remember.  I'm at the end of my mind.  Help, please.

  JW,

  Thanks for the continued support.

  By the advice of IPCONFIG, I looked at the registry for all computers and found EnableProxy wasn't there.  According to the documentation by default to 0, which is what we want.  However, I added it to all the computers and left it set to 0 and restarted the computer.  The node Type still said 'unknown '.

  Thanks for the info on the master browser.

  The ""Network location cannot be reached"when you access actions."
  the article talks about Windows 2003 Server and none of the symptoms mentioned relate to this situation.

  The "network adapter advanced troubleshooting for Windows workstations" is on hardware troubleshooting.  I think that it's probably not a problem because the computer has no trouble to access the internet, which is not possible if the card network are not working.

  I went through the AutoCorrect entry to reset the TCP/IP stack, even if the article describes symptoms such as difficulty to access the internet...  And...  THIS MARKET!

  After re-booting, the PC that was in trouble can now access the working group.  All other PCs can always too (have not tried to restart all over again).  AWESOME!  I can't thank you enough!

  I re-post if the syptoms happen; but for now, we can consider this issue RESOLVED.

  Thank you 1 million,

  Adam

• CDROM and DVD report D:/not accessible win2k sp4 on new installation and trays open at startup

  Just installed Win2K an old pc with w2k being what came with it originally.

  Found problem when multiple upgrade files have been placed on a CD - R and then put in the CD on a new installation, and immediately it says D: / is not accessible and I think it says "service not taken in charge.

  Sought, and it was suggested to simply eject the disc and try later.  This does not solve it. And not 3rd party software, at all.    Installed nero 6, CD works fine with a disc recorded in trade, such as the Windows 2000 installation disc;  But apparently a disc recorded from another pc, with Vista using the option to make a data disc in the Explorer of

  After searching and trying several fixes, and read how others have tried but not corrected, Im trying to find the solution?

  And what happens at the start, both players, CD and DVD just open doors / ejection by themselves.

  During shutdown, the INCD app crashes and wont let close, but with or without nero or 3rd applications, the CD/DVD does not read a disc that I did.

  A suggestion said to check that the registry HKLM... but the specified folder was not there yet.  Now I know how explore feels.

  Ive searched but I'm still trying to find an exact solution for this, it's a pc to give to someone for Christmas

  
  

  Don't forget about power of Attorney

  Hi Brad,

  Windows 2000 issue you posted is better suited for the IT Pro TechNet public. Please ask your question in the Site Web of TechCenter Windows Client for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win7 computer cannot connect to other computers Win7 network "\\computername is not accessible. You might not have permission to use this network resource ".

  I have a Windows 7 (box A) system that cannot connect to files shared on another computer in Windows 7 (box B).

  • On the 'network card' and 'See the network computers and devices', I can see box B of area A.
  • I can ping Box B of area A.
  • I can connect on MEDIA sharing on box B of area A.
  • Area C (another system of Windows 7) I can connect to the B area and am presented with a box of authentication to connect to the shares (i.e., box B works as it should).

  But the box has double clicking on box B or using \\computername or \\IP_Address the dialog box run, I get the error:

  ----

  \\computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network is not present or not started.

  ----

  I know that the system is available, because the area C can access... But something's not on the box... It cannot connect to zone B or C. Box

  I have disabled the firewall on both systems without result.

  I reinstalled the network adapter and Client for Microsoft Networks is installed on the box.

  Yet somehow box's not connection to other computers on the network.

  Any thoughts on what I should check would be appreciated.  Thanks in advance for the help.

  OK... so I was able to track down and get it fixed...

  I found another symptom (that would be a good way to check and see if you experience the same problem).

  In the network and sharing Center, I clicked on "Change advanced sharing settings" in the left column. I found that the radio button under "File and printer sharing" was put on the OFF position.  I started and saved the changes, but when I returned in these settings, it is once again in the off position.

  It turned out that the workstation service is set to disabled (which also caused the computer browser service for not being able to boot). I activated the workstation service, started, and set it to automatic.  Then did the same for the computer browser service.

  Both of these services running, the "File and printer sharing" it will remain actually on IT, and I am able to connect to other devices on the network in the way I had to.

  I can't mark this message as the solution (perhaps because I posted it?) so if someone he will quote as their response to the post office, I'll be able to mark as answer.

• PROT-30: the Oracle Cluster registry location to add is not accessible

  Hello
  
  5L (5.3) OS - AIX
  11.2.0.1 - Oracle RAC
  
  I'm trying to add an ocr to an another diskgroup external redunancy (1 lun 300 MB) on a cluster of 2 knots and getting the error below. Thought might be from permission changed ownership of grid even though I know that the ocr must be root as shown below. Please let me know what did I do wrong here.
  
  
  
  /U01/app/11.2.0/grid/log/mvc21b/client > ocrcheck
  Status of the Oracle Cluster registry is:
  Version: 3
  Total space (in kilobytes): 262120
  Space (in kilobytes) used: 3064
  Amount of available space (KB): 259056
  ID: 1640695116
  File name of device /: + CRS_DATA
  Verifying the integrity of file/device succeeded
  
  File/device not configured
  
  File/device not configured
  
  File/device not configured
  
  File/device not configured
  
  Checking cluster registry integrity succeeded
  
  Logical corruption control bypassed due to the non-privilegie user
  
  
  
  Ran command below as root:
  
  /U01/app/11.2.0/grid/bin >. / ocrconfig - add + crs_data1
  PROT-30: the Oracle Cluster registry location to add is not accessible
  
  Even the compatibility for asm/RDBMS is set to 11.2
  
  NAME TYPE COMPATIBILITY
  ------------ ------ ------------
  EXTERN CRS_DATA 11.2.0.0.0
  EXTERN 11.2.0.0.0 CRS
  MVMXU1_DATA EXTERNAL 11.2.0.0.0
  MVMXU1_REC EXTERNAL 11.2.0.0.0
  CRS_DATA1 EXTERNAL 11.2.0.0.0
  
  
  NAME COMPATIBILITY DATABASE_COMPATIBILI
  ------------ -------------------- --------------------
  CRS_DATA 11.2.0.0.0 11.2.0.0.0
  SIR 11.2.0.0.0 10.1.0.0.0
  MVMXU1_DATA 11.2.0.0.0 11.2.0.0.0
  MVMXU1_REC 11.2.0.0.0 11.2.0.0.0
  CRS_DATA1 11.2.0.0.0 11.2.0.0.0
  
  
  Node1:
  
  $ ls - ltr/dev / * hdisk0
  CRW - 1 gmvmxu1 18, 0 19 Oct 11:31 oinstall / dev/rhdisk0
  BRW - 1 gmvmxu1 oinstall 18, 0 Oct 19 14:58 / dev/hdisk0
  
  create an alias for the name device on both nodes as ocr_mirror as shown below (rhdisk0).
  
  $ ls - ltr ocr_ *.
  crwxrwxrwx 1 gmvmxu1 oinstall 18, 0 20 Oct 10:39 ocr_mirror
  
  node 2

  ls - ltr * hdisk0

  crw - 1 gmvmxu1 oinstall 18, 0 Oct 19 11:54 rhdisk0
  BRW - 1 gmvmxu1 oinstall 18, 0 Oct 19 14:58 hdisk0
  
  LS - ltr ocr_ *.
  crwxrwxrwx 1 gmvmxu1 oinstall 18, 0 20 Oct 10:28 ocr_mirror
  
  
  Customer login:
  
  Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996,
  2009 Oracle. All rights reserved.
  2010-10-20 10:28:58.113: ocrconfig [OCRCONF] [1] starts...
  2010-10-20 10:29:01.408: [OCRCLI] [1] proac_replace_dev: [+ crs_data1]: failed. Re
  Arome [8]
  2010-10-20 10:29:01.408: [OCRAPI] [1] procr_replace_dev: could not replace devic
  e (8)
  2010-10-20 10:29:01.408: [OCRCONF] [1] the new system of OCR [+ crs_data1] cannot be
  Open
  2010-10-20 10:29:01.408: Exiting [OCRCONF] [1] [status = failure]...
  ~
  ~
  ~
  
  Thank you
  
  Published by: user9097501 on October 20, 2010 08:10
  
  Published by: user9097501 on October 20, 2010 08:11

  Hello

  If the files on disc with voting rights are in a disk group, know that groups of disks with files Oracle Clusterware (OCR and voting disk files) have a more minimal number of failure than other groups of disks.
  If you create a group of records as part of the installation in order to install the OCR and files on the drive to vote, then the installation program requires that you create these files on a disk group with at least 2 GB of free space.

  A lack of quorum group is a special type of the failure group and these groups of failed disks contain no user data. A group of lack of quorum is not considered when determining the requirements of the redundancy for storage of user data. However, a lack of quorum group account when mounting a disk group.

  For the Oracle Clusterware installation, you must also add the additional disk space for Oracle ASM metadata. You can use the following formula to calculate the disk space required (in MB) for the OCR and voting disk files and metadata from Oracle ASM:

  total = [2 * ausize * discs] + [redundancy * (ausize * (nodes * (+ 1) + 30 clients) + (64 * nodes) + 533)]

  Where:

  redundancy = number of mirrors: external = 1, normal = 2, high = 3.

  ausize = size in megabytes metadata.

  nodes = number of cluster nodes.

  clients - the number of instances of database for each node.

  drives - number of disks in the disk group.

  See the link below for more details...

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e17212/storage.htm#CDEDEEAH

  I recommend you to read the entire section 3.3.1.1.

  3.3.1.1 identify storage for Oracle Automatic Storage Management needs

  Kind regards
  Levi Pereira

• Site Web Server not accessible via the internet

  Hello Apple community,

  I had a problem with the.app Web sites, where my site Internet (FQDN) is accessible via the network internal, but not accessible through the internet. I have port ports 80 and 443 passed on my firewall and I can see the ports open via nmap on an external connection.

  When I browse the site via http, I get redirect to 443 then it just resets and I get no error page. Internally, the page redirects to 443 and loads fine with the popup of trust initial cert (self-signed cert) that I then store to my keychain and loading the page well. I get no this pop up via an external network.

  Accessibility is accessible by 80 (green circle icon) but not of 443 for reasons I can't understand.

  I already tried to remedy the situation of the measures:

  Create a new self-signed cert to use. (same results)

  Disable ssl and disable redirection. (causes a load error in the browser)

  Wiped the OS reinstall OS X El Capitan and.app. (same results)

  Checked the port forwarding on my firewall Meraki 15 times (looks good)

  Disabled the feature IPS of the PPE on the Meraki (same results)

  Maybe I'm just on something? I hope someone out there can help.

  Thank you!

  Well, thought about it. < bangs head >.

  ATT Uverse uses port 443 for flow towards Wireless HD receivers in the House. There is a way to change the port it uses, and I'll try and do it later and post my results in case someone else is having the same problems.

  Thinks... "Why the hell ATT would use a common port for Wireless HD? SMH.

• Options expenses, but are not accessible. Unusual small box described in the Center. Win 10 64 istalled operating system. Have you tried disableing extensions.

  Loads Options page but are not accessible. Small box (without text) appears in the middle of the page. Have you tried various installs Firefox (current edition of Foxstart). Tried to disable extensions. Win 10 64 operating system. Chrome is by default because it can not reset Firefox because of issue of Options.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• MacBookPro successfully updated for the SSD but old disk HARD not accessible as external drive

  OK people,

  Successfully, I upgraded my MBP late 2012 to 1 TB SSD with the help of the community here. Thank you.

  My old drive was an 8.1 El Capitan\Win Bootcamp and worked pretty well without fault.

  I used the disk utility to clone the OSX partition and did a fresh install of Win10 through BootCamp.

  So far so good.

  However, my plan was gradually transfer the files from the old partition Win 8.1 in the score of Win10 that I need them.

  That is the problem. Win10 OS or my OSX recognize the old Win8.1 HARD disk partition. However, they both recognize the old OSX partition.

  The two operating systems (OSX\Win10) was format\Initialise the old HDD when connected through a USB enclosure.

  As a test, I swapped the old disk to the MBP and it started actual Win8.1 therefore the partition is accessible. Actually I'm in it starts now as I type this message.

  Watch Windows Disk Manager partition as a RAW rather than NTFS where the desire to get in shape. I am reluctant to start playing with partitioning\recovery tools because I can access the drive while having to open the MBP, but it is accessible.

  Is there a reason why the original HARD drive is not accessible as a normal external drive?

  ATM my only option I'm looking at is a copy of right of ALL files in the Windows 8.1 on another disk partition so that I can easily access the files.

  Ideas or suggestions appreciated.

  Try ejecting the disc (use disk utility), reboot and reconnect the drive.

• DownThemAll is installed but is not accessible

  I installed the add-on Downthemall, but is not accessible. I mean that, although Downthemall appears in the list of Extensions installed and active, there is no other evidence of its existence - for example, no button or right click on the menu. (I am a user of long date Downthemall (on another machine), so I have some experience with the program.) Also, when I click on Downthemall preferences in the Extensions list, nothing happens.

  I'm on a Macbook Pro 15 "screen Retina running 10.8.4 Mountain Lion and Firefox 23.0.1.

  Thanks for your suggestions on how to solve this problem.

  I found the problem. I disabled the module additional own links and menus of the DtA appeared. DtA works fine now.

• Drop-down menus blink and are not accessible.

  Multi-site blink drop-down menus and are not accessible. Why? I tried to restart and will by default nothing helps. This will not occur in Internet Explorer.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will lose all personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Book: CD/DVD device is not accessible. Access denied message

  Hello

  I tried to access some of my cd.

  Currently, I get an error message indicating "d:\ is not accessible. "access is denied", for the most part cd.

  So far, I have a cd which I can access, but I still get a message indicating "SONIC DLA - your version of DLA can read files on this drive, but you will not be able to change or add their.

  I would be grateful for any advice or comments on how to solve this problem.

  Kind regards.

  Hello

  Your error message comes from the software Sonic-letter of mission which is part of the suite of Sonic RecordNow.

  I think that book books come with a pre installed = the version of Sonic, but I don't know if it includes DLA.

  Unfortunately, I'm not familiar with the Sonic game produced, but I guess it must be some configuration or settings required for DLA allow the use of ease & slide. I suggest that you check your settings to ensure that they are compatible with your system.

  HTH