Vs ASA VPN SSL IPSEC
Hello all -
I'm working on an ASA 5510, running version 8.4. I'm looking for something that I imagine would be simple, but having a few problems.
I am configuring the connection profile for the client and clientless VPN on the SAA. I would like the profiles of customer (who will serve with anyconnect by our internal staff) to have the possibility to select the profile to login on the login page. I have create a subnet by using policies and business unit to restrict access to various servers. This option button is displayed on the page of remote vpn in the ASDM, I select it and problem solved, they see a drop-down menu when using the anyconnect client, select one and the appropriate IP pool is assigned.
Now, when I am configuring profiles without client (to be used by our external business clients), I don't want that they have the ability to choose a profile. At least not the ability to see all of the internal profiles, I created for our internal employees. It is displayed by selecting this option in the "client access", it also allows her to "client access". What Miss me in how I can prevent our external collaborators via SSL, see the profiles that I created for our internal employees via the drop-down list? As I hinted above, I use the ASDM.
Any help would be appreciated-
Brian
Hello
Unfortunately this is not possible because when you enable the option for users to select the connection profile, it will be available for all connections. If this is not enabled the default policy will be selected so it is a must to have chosen option.
What you can do is to create a group URL and maps it to a specific connection profile, so when users type in the full URL for example https://my domain.com / external it will take the user directly on the specific connection profile.
The size to the bottom of this configuration is that if someone types in the URL without the group URL it is taken to the default profile and can see the drop-down list with all connection profiles.
Sent by Cisco Support technique iPad App
Tags: Cisco Security
Similar Questions
-
AnyConnect SSL VPN through IPSEC Tunnel
Everyone was able to set up and connect using Cisco anyconnect vpn ssl on a Cisco IPSEC's tunnel. I used this in the past from a Windows XP system in the past but its not working now. None of my users are able to cooect using the Anyconnect on IPSEC. IPSEC on its own works very well.
The Anyconnect is also able to create the connection to its ASA firewall however its not able to route all traffic through. Do you have any suggestions?
Thanks for the update.
-
Cisco VPN Client and Windows XP VPN Client IPSec to ASA
I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.
PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?
Config is:
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. 1 255.255.255.0
!
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0
flow-export destination inside-Bct 192.168.1.27 9996
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
NAT (inside-Bct) 0 access-list sheep-vpn
NAT (inside-Bct) 1 access list nat
NAT (inside-Bct) 2-nat-ganja access list
Access-group rdp on interface outside-Ganja
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
dynamic-access-policy-registration DfltAccessPolicy
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
life crypto ipsec security association seconds 214748364
Crypto ipsec kilobytes of life security-association 214748364
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
crypto isakmp identity address
ISAKMP crypto enable vpntest
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
No encryption isakmp nat-traversal
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.1.0 255.255.255.192 outside Baku
SSH 10.254.17.26 255.255.255.255 outside Baku
SSH 10.254.17.18 255.255.255.255 outside Baku
SSH 10.254.17.10 255.255.255.255 outside Baku
SSH 10.254.17.26 255.255.255.255 outside-Ganja
SSH 10.254.17.18 255.255.255.255 outside-Ganja
SSH 10.254.17.10 255.255.255.255 outside-Ganja
SSH 192.168.1.0 255.255.255.192 Interior-Bct
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
BCT.AZ value by default-field
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Hello
For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.
Please see configuration below:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
or
Please see the section of tunnel-group config of the SAA.
There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.
So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.
Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.
"crypto isakmp nat-traversal.
Thirdly, change the transformation of the value
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
Let me know the result.
Thank you
Gilbert
-
ASA VPN positive = SSL VPN?
Hello
I have a pair of FO, I need to exchange an ASA5520 who owns a license of VPN over 750
Can I use an ASA5520 with ASA5500-SSL-750 instead
Regards Tony
Yes, it is always available on order. Part number: ASA5520-VPN-PL =
In addition, this more ASA VPN would be much much cheaper than the SSL VPN license.
Thank you
Kiran
-
I have already set up site to site vpn asa.
Now, I want to create asa ssl AnyConnectVPN.
Please help me with the configuration for all VPN connection?
Configuration VPN SSL Clienless already on our asa
"If I try to access to, the error is.
Opening of session Connection refused. Your environment does not respect the terms of access defined by your administrator. Please notify this error for me. I changed the username and password may also.
Thank you
Aung
Hey Aung,
It's the best way to get rid of this message:
WebVPN
No csd enabled
!
dynamic-access-policy-registration DfltAccessPolicy
action continue
The reason why you see the message is because you have a dynamic access policy refuse your connection, because your system does not meet the requirements.
HTH.
Portu.
-
I couldn't find the answer to this in google.
You have to use the anyconnect software or you can use other as openvpn client software to connect to your asa.
If it is for home, ASAs all equipped with 2 free licenses of AnyConnect Premium.
You can even set up a VPN SSL without client using those and does not any client software - a simple browser.
Purchase price for a small number of licenses AnyConnect is very cheap indeed.
You can use generic third-party clients for IPsec VPN IKEv1 (not for the SSL VPN client-oriented).
-
Unable to connect to the ASA vpn Android client
secHello, I have problem with android client. So I've solved many problems and finally could get the PHASE 1 and PHASE 1 COMPLETED messages in newspapers :). In any case, I have a problem different, even if the client of the phase 1 and 2 completed failed to connect again. Here are the logs:
| 21456 | *** | 500 | Built of UDP connection entrants for outdoor 600577524: * / 21456 (* / 21456) identity: * / 500 (* / 500)
| 27262 | *** | 4500 | Built of UDP connection entrants for outdoor 600577567: * / 27262 (* / 27262) identity: * / 4500 (* / 4500)
Group = ANDROID_PROF, IP = *, automatic NAT detection status: remote endpoint IS behind a NAT device this end is behind a NAT device
Group = ANDROID_PROF, IP = *, floating NAT - T of * port 21456 to * port 27262
Group = ANDROID_PROF, IP = *, PHASE 1 COMPLETED
Group = ANDROID_PROF, IP = *, IPSec initiator of the substitution of regeneration of the key time of 0 to 4608000 Kbs
IPSEC: Remote access out HIS (SPI = 0x0429CEA7) between * and * (user = ANDROID_PROF) was created.
Group = ANDROID_PROF, IP = *, the security negotiation is complete for user (Responder), Inbound SPI = 0xc95803fc outbound SPI = 0x0429cea7
IPSEC: Incoming remote access between HIS (SPI = 0xC95803FC) * and * (user = ANDROID_PROF) was created.
Group = ANDROID_PROF, IP = *, PHASE 2 COMPLETED (msgid = 9aab13ed)
| 27262 | *** | 1701 | Built of UDP connection entrants for outdoor 600577657: * / 27262 (* / 27262) identity: * / 1701 (* / 1701)
L2TP tunnel created, tunnel_id 24, remote_peer_ip is *, 1/ppp_virtual_interface_id, client_dynamic_ip is 0.0.0.0, user name is *.
Tunnel L2TP deleted, tunnel_id = 24, remote_peer_ip = *.
IPSEC: Remote access out HIS (SPI = 0x0429CEA7) between * and * (user = ANDROID_PROF) has been removed.
IPSEC: Incoming remote access between HIS (SPI = 0xC95803FC) * and * (user = ANDROID_PROF) has been removed.
Group = ANDROID_PROF, IP = *, Session is to be demolished. Reason: The user has requested
Group = ANDROID_PROF, user name =, IP = *, disconnected Session. Session type: IPsecOverNatT, duration: 0 h: 00 m: 07 s, xmt bytes: 1021, RRs bytes: 955, reason: the user has requestedAs you can see session was demolished immediately, said Android failure. The Android settings:
Name: ANDROID_PROFType: L2TP/IPsec Psk
The IPsec identifier: ANDROID_PROF
Pre-shared key IPsec: cisco
The ASA config:
attributes global-tunnel-group ANDROID_PROF
address IPSEC_RA_POOL pool
Group-LDAP LOCAL authentication server
LDAP authorization-server-group
NOACCESS by default-group-policy
IPSec-attributes tunnel-group ANDROID_PROF
IKEv1 pre-shared-key *.
tunnel-group ANDROID_PROF ppp-attributes
CHAP Authentication
ms-chap-v2 authenticationANDROID_PROF_GP group policy attributes
value of DNS server *.
VPN - 4 concurrent connections
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ANDROID_PROF_USERS
Cisco.local value by default-field
the address value IPSEC_RA_POOL poolsHello
Your problem is with Android L2TP/IPsec client that connects to the AAS has been caused by: CSCug60492 (Android phone disconnected from l2tpoveripsec and reconnect asa hung)
It is Android actually issue, not a bug of the SAA. This resolution is based on Android.
I hope this helps.
Thank you
Vishnu
-
Does anyone know if the GRE tunnels can be used with the AIM-VPN/SSL-2 module for the Cisco 2800 series routers?
Yes, we use it with GRE/IPSec.
Hope that helps.
-
Device behind a Firewall other, ASA VPN
I have a client who wants to put their VPN / behind the ASA ASA main connected to the Internet. Both devices have an inside leg for the internal network, but the ASA VPN connects directly to the Internet ASA.
Topology:
Outisde FW: Internet transfer Procedure > ASA/FW > leg DMZ to ASA/VPN
ASA VPN: Outside the L3 Interface interface DMZ of ASA/FW link
On the outside NAT FW I would be the external address of the VPN / ASA outside the public IP address is available and I have a rule that allows all IP from outside to outside the private IP VPN. Inside = 192.168.254.1 outside = public IP address.
Configured on the VPN / ASA, ASA standard SSL Remote Access.
When I hit the NAT public IP address, nothing happens. I've run packet - trace on the FW outside, and everything seems good.
Someone at - it a sampling plan / config for a similar topology? Internet > ASA/FW > dmz-leg > ASA/VPN
Thanks in advance,
BobCan share you your NAT and routing configuration? Of these two ASAs
-
WebVPN and remote vpn, ssl vpn anyconnect
Hi all
Differences between webvpn and remote vpn, ssl vpn anyconnect
All require a separate license?Thank you
Hello
The difference between the webvpn and SSL VPN Client is the WebVPN to use SSL/TLS and port
send through a java application to support the application, it also only supports TCP for unicast traffic, no ip address
address is assigned to the customer, and the navigation on the web in the tunnel is made with a SSL
Web-mangle that allows us stuff things in theSSL session.
SSL VPN (Anyconnect) Client is a client of complete tunneling using SSL/TCP, which installs an application on the computer and
envelopes vpn traffic in the ssl session and thus also an assigned ip address has the
tunnel's two-way, not one-way. It allows for the support of the application on the
tunnel without having to configure a port forward for each application.
AnyConnect is a client of new generation, which has replaced the old vpn client and can be used as long as the IPSEC vpn ssl.
For anyconnect licenses please see the link below:
http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...
Kind regards
Kanwal
-
Emergency response in ASA VPN 5055
Hey guys...
AM starting in ASA and cisco configuration, I always use ASDM Launcher to set up or change my Cisco Firewall ASA5055, I tried to enable VPN on my ASA with IPsec VPN Wizard, remote VPN section and I did a configuration for Cisco VPN Client (not windows), until this moment, I still couldn't connect to my VPN, I don't know where is the problem exactly , it delivery? or access list?
Here is running Setup:-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
: Saved
:
ASA Version 8.0(3)6
!
hostname ciscoasa
enable password ******* encrypted
passwd ********* encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 10.10.10.2 255.255.255.252
!
interface Vlan2
nameif outside
security-level 0
ip address xx.xx.xx.xx 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list DALLAS_splitTunnelAcl standard permit host 192.168.3.229
access-list DALLAS_splitTunnelAcl standard permit 10.10.10.0 255.255.255.252
access-list DALLAS_splitTunnelAcl standard permit 192.168.3.0 255.255.255.0
access-list dallas_VPN_splitTunnelAcl standard permit 10.10.10.0 255.255.255.252
access-list Out extended permit ip any any
access-list inside_nat0_outbound extended permit ip 10.10.10.0 255.255.255.252 192.168.14.0 255.255.255.192
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1492
ip local pool Dallas 192.168.14.1-192.168.14.50 mask 255.255.255.0
ip verify reverse-path interface inside
ip verify reverse-path interface outside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
asdm image disk0:/asdm-603.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) interface 192.168.3.229 netmask 255.255.255.255
route outside 0.0.0.0 0.0.0.0 xx.xx.xx.xx 1
route inside 192.168.3.0 255.255.255.0 10.10.10.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 1:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no sysopt connection permit-vpn
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
no crypto isakmp nat-traversal
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
vpnclient server xx.xx.xx.xx
vpnclient mode client-mode
vpnclient vpngroup dallas password ********
vpnclient username dallas password ********
threat-detection basic-threat
threat-detection scanning-threat shun
threat-detection statistics
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy dallas internal
group-policy dallas attributes
dns-server value xx.xx.xx.xx
vpn-tunnel-protocol IPSec
username admin password *************** encrypted privilege 15
username dallas password ********* nt-encrypted privilege 0
username dallas attributes
vpn-group-policy DefaultRAGroup
username user1 password *********** nt-encrypted privilege 0
username cisco password ********* encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group dallas type remote-access
tunnel-group dallas general-attributes
address-pool Dallas
default-group-policy dallas
tunnel-group dallas ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:beac138dba28b1b3b58dffbcbc4fbb93
: end
asdm image disk0:/asdm-603.bin
no asdm history enableWhen I use the VPN Client to connect to my VPN using the real IP, this message
Please if someone can see the problem and tell me how to solve it by ASDM GUI or CLI, but I preferred ASDM...
Note: VPN Tunnel must connect on 192.168.3.X internal network IP range
which is accessible by ASA you see the redirect to 192.168.3.229Thank you all
Here is the step by step on all orders that are required so far:
conf t
Sysopt connection permit VPN
Crypto isakmp nat-traversal 25
inside_nat0_outbound to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.14.0 255.255.255.192
dallas attributes of group policy
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DALLAS_splitTunnelAcl
user name attribute of dallas
No strategy of group-vpn-DefaultRAGroup
Strategy Group-VPN-dallas
not static (inside, outside) interface 192.168.3.229 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 80 192.168.3.229 80 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 132 192.168.3.229 132 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 444 192.168.3.229 444 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 66 192.168.3.229 66 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 77 192.168.3.229 77 netmask 255.255.255.255
clear xlate
And finally "wr mem" to save the configuration.
Regarding spam, ASA cannot block spam unless you have the CSC module installed on the SAA.
-
Hello
I have an ASA with version 7.2. (2) as an SSL - VPN endpoint. After the upgrade of some clients for windows 7 and IE 8.0, we had problems with SSL - VPN. The vpn client begin on the Windows 7 client.
Anyone know what is needed on the ASA and the customers to work with SSL - VPN on Windows 7?
Hello
You must run 2.4 Anyconnect which requires ASA 8.x version
Please find below compatibility reference
http://www.Cisco.com/en/us/docs/security/ASA/compatibility/ASA-VPN-compatibility.html#wp84295
-
Hello world
I would like to ask for help in order to correct a customer vpn tunnel. I'm not familiar with the AAS, so please do not laugh if I write something stupid
So I inherit one asa, which has two interface used physical and vlan more. Outdoors, office, management and management. I use my computer on the vlan management, and I can reach the computers on the desktop (192.168.12.0/24) and the branch (192.168.10.0/24). I would realize that I connect to thrught houses a vpn, and I should reach the 12.x and 10.x network as I was in these networks (due to the microsoft allowed wirewall to the local network traffic).
I inherited a vpn configuration which I added my user.
I'm trying to cite only the relevant portion of config:
SSH 192.168.99.0 255.255.255.0 management
access extensive list ip 192.168.99.0 nonat_management allow 255.255.255.0 192.168.99.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0IP local pool ippool 192.168.99.100 - 192.168.99.200
NAT-control
Global 1 interface (outside)NAT (management) - access list 0 nonat_management
nat_management_office list of access 5 NAT (management)
nat_management_branch list of Access 10 NAT (management)192.168.99.50 management - dhcpd addresses 192.168.99.79
enable dhcpd managementL2TP strategy of Group internal
monty password username * == encrypted nt
monty username attributes
Protocol-tunnel-VPN l2tp ipsec
VPN-framed-ip-address 192.168.99.99 255.255.255.0
attributes global-tunnel-group DefaultRAGroup
ippool address pool
Group Policy - by default-l2tp
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authenticationI quote the encryption settings, because I can connect to asa, I think that I have problems with the nat or access rules.
I have an ip local pool 192.168.99.100 - 192.168.99.200, but I have the fixed ip with the vpn-framed-ip-address 192.168.99.99 255.255.255.0
Happened when I connect and try to reach the following computers:
I can reach only a freenas 192.168.12.2, and I see in his journal that I have connected with 192.168.99.99 (vpn-framed-ip-address)
I can't reach the computers on networks, however I have two nat rules, working when I'm in the office network 99.0
access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0It seems that these two nat rules do not work with my vpn client.
And it is very important to arrive at the asa with ssh through the tunnel, but I can't.
I don't know if that is the ip address of the vpn client is in the management network, perhaps one should change to another network:
for example 192.168.95.0/24
A vpn asa for Dummies or any help is appreciated.
Thank you very much
Hi Chris,
The following should help:
access-list allowed 192.168.12.0 nonat_office 255.255.255.0 192.168.90.0 255.255.255.0
In this way, returning office subnet pool VPN traffic is exempt from nat. And so you will not get the failure of RPF checking.
In addition, you must change this:
nat_vpn_office to access extended list ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0
(incoming traffic on the VPN remote access would come from the VPN pool.) Not your home network.)
You must have:
No nat_vpn_office access list extended ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0
access extensive list ip 192.168.90.0 nat_vpn_office allow 255.255.255.0 192.168.12.0 255.255.255.0
NAT (outside) 5 nat_vpn_office list of outdoor access
Hope this helps, and sorry for the delay.
-Shrikant
P.S.: Please check the question as answered if it was resolved. Do rates all useful messages. Thank you.
-
setting up a vpn ssl to a netgear router
I have setup a router netgear FVS336G at a customer and you have configured a vpn ssl to the customer. I can cinnect on a win xp machine, but not on my machine which is running Vista 64 bit. I get narrations of error message cannot install the vpn tunnel.
Hi Jluequi,
The issue of Windows 7 you have posted is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello people!
I still have the problem with VPN... Laughing out loud
I have to create a new VPN site to site between ASA 5510 (8.42 IOS) and Fortgate, but something is very strange, Don t VPN came and I see in the debug crypto 10 ikev1 the newspaper to follow:
[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2
But if I ask the other peer to change in Group 2, the msg in the SAA is:
[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1
Fortgate is possible to activate the two specific groups of VPN 1 and 2, and I would ask the other peer left this way and the ASA show:
[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Group 2 GCF: Group 1
[IKEv1] phase 1 default: incompatibility of types of attributes of class Gr OUP Description: RRs would be: Cfg 1 group would be: Group 2The show isakmp his:
9 counterpart IKE: 179.124.32.181
Type: user role: answering machine
Generate a new key: no State: MM_WAIT_MSG3I have delete and creat VPN 3 x and the same error occurs.
Everyone has seen this kind of problem?
Is it using Fortigate version 5 by chance?
I saw Cisco ASA VPN problems repeatedly with this code Fortigate, but above all it has been a problem of Phase 2 and defining KB life maximally on the side of the ASA has solved it... However this seems not to be your problem here.
The first thing in your config I see you have PFS enabled - have you insured it is located on the side of Fortinet or tried to turn it off on the side of Cisco to see if it happens?
Be stuck at MM_WAIT_MSG3 means that you sent your return policy, but then you have not received the third package in the ISAKMP riding so either the Fortigate is unhappy with something or there's a routing problem (however unlikely given that you have already had communication)
Try on the side of the ASA:
debug crypto isakmp 7
You can also confrm your external interface is 'outside1 '? You can see this "see intellectual property."
Maybe you are looking for
-
Upgrade memory for MacBook Pro mid-2014
I have a Retina (2014 Mid) MacBook Pro. There are already 16G memory. But I still even is not enough for me. Can I add more memory?
-
ProBook G3 450: Win 7 Pro license recovery after a downgrade Win 10 Pro
Hello We just received our HP Probook 450 G3 downgraded to win 10 Pro with Win 7 Pro as requested. We now have to master with our tools but, previously, I need to pick up the Win 7 Pro license. I'm looking for the Productkey defined for laptops. Than
-
spacing of email staff signarture
I created a personal signature and in the email I create looks good, when I go to print a copy of my email, there are additional spaces between each line. \ How can I get rid of the extra spaces? Thank you. Bob Harvey
-
can not receive replies to emails I sent
Remember - this is a public forum so never post private information such as numbers of mail or telephone! I can send e-mail, but if the receiver clicks the button answer bounces to them. electronic mail sent directly to me is received without a probl
-
Transaction $ v can be used to obtain an estimate of the progress of the transaction?
HelloMy question is simple. I am required to push data from one environment to another, because the volume of data is important, that I would like to have an estimate of the status.I'm just an access direct-path insert using a simple query:INSERT / *