El Capitan LDAP authentication

Similar Questions

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• Fabric connecting LDAP authentication

  Hi guys,.

  I am running 2.0(2q) UCSM

  I was wondering if there was a way of configuring LDAP authentication by logging in via SSH to the FIs?

  I installed all group mappings and adds users to these groups without any problems, but I can't seem to figure out how to get LDAP for authentication when you use a session SSH on the FI.

  Someone at - he put in place before?

  Thank you

  Doug,

  Are you sure you are using the correct syntax when connecting via CLI?

  If AD authentication works through the GUI, it should work in CLI.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/CLI/config/Guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0.PDF

  

  Kind regards

  Robert

• LDAP authentication on vty router login

  I'm trying to deploy authentication ldap (AD MS) for a connection vty router. I used the manual like this - http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_ldap/configuration/15-2mt/sec_conf_ldap.html

  But my scenario was unlucky

  My config is...

  _____

  AAA new-model

  !

  !

  AAA server ldap ad1 group

  test server

  !

  AAA authentication login default group local ad1

  AAA authorization exec default authenticated if

  !

  jump...

  !

  map1 LDAP attribute-map

  user name of card type sAMAccountName

  !

  test LDAP server

  IPv4 172.16.107.145

  attribute map map1

  Retransmission Timeout 20

  bind authenticates root-dn CN = Administrator, CN = users, DC = fabrikam, dc = com password 7 02050D 480809

  base-dn CN = users, DC = fabrikam, dc = com

  _____

  instead of "ldap attribute-map map1" I tried to use "search user-object-type-filter name. No effect

  I used wireshark for sniffer of cisco to AD packages. No package at the port of AD (389 or 3268) have been captured.

  I used the ldap debugging all the

  This is the output

  * Jun 9 19:38:45.414: LDAP: LDAP: AAA Queuing 117 of treatment application

  * Jun 9 19:38:45.414: LDAP: received the queue event, new demand for AAA

  * Jun 9 19:38:45.414: LDAP: LDAP authentication request

  * Jun 9 19:38:45.414: LDAP: no attributes to check username mental health

  * Jun 9 19:38:45.414: LDAP: name of user/password validation test failed!

  * Jun 9 19:38:45.414: LDAP: LDAP not suport interactive logon

  Note the last string. Is that what it means I can't use ldap for this?

  What I've done wrong?

  I am grateful for!

  LDAP on IOS support is limited to the VPN authentication and unfortunately cannot be used for authentication of the Admin (exec).

  CSCug65194    Document nonsupport LDAP for authentication of connection

  AAA does not support using a LDAP method for interactive logon authentication. Customers can configure 'aaa authentication login default group ldap', but when an interactive session (Terminal) attempts to authenticate via the LDAP protocol, the

  following message is syslogged:

  "LDAP: LDAP does not support interactive logon [sic]."

  This is due to the aaa/ldap/src/ldap_main.c of next record ldap_authen_req():

  If (intf & intf-> ATS) {}

  LDAP_EVENT ("LDAP don't suport interactive logon");

  ldap_method_failover (proto_req);

  Jatin kone
  -Does the rate of useful messages-

• ASA5510 ldap authentication: out of memory error

  Hi all

  I have a problem in the ldap authentication.

  When I try the test of authentication I get this error: "Authenticatione rejected: out of memory error.

  What it means? Is that a response from the server?

  RADIUS authentication to the same server works very well.

  The ASA version is 8.0 (4) and asdm version 6.2 (1).

  same problem, version 8.2

• Asa and Cisco ldap authentication

  Hi all

  I have a problem with LDAP authentication.

  I have a cisco Asa5510 and windows Server 2008 R2

  I create the LDAP authentication.

  AAA-server LDAPGROUP protocol ldap
  AAA-server host 10.0.1.30 LDAPGROUP (inside)
  Server-port 389
  LDAP-base-dn dc = systems, dc = local
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn CN = users, OU = users, DC = network, DC = local
  microsoft server type

  but when I test, I have an error (user account work directly to the server)

  AAA-authentication server LDAPGROUP host 10.0.1.30 userid password test *.

  INFO: Attempt to <10.0.1.30>IP address authentication test (timeout: 12 seconds)
  ERROR: Authentication rejected: not specified

  Help, please

  concerning

  Frédéric

  You have the account with username 'user' in ' 'reseaux.local' and "Utilisateurs.reseau.local '?"

  If so, can you check if they are two other AD domain? The bug pointed out that ASA do not support authentication via LDAP refererals multi-domain.

  You might consider to using an account administrator AD in "reseaus.local" for ASA to connect to AD.

• Another failure of the LDAP authentication

  I'm trying to setup LDAP authentication for my ASA, as well as the AD Agent.  Currently my authentication fails with the following debug output...

  [- 2147483610] Starting a session

  [- 2147483610] New Session request, the 0xcc854d8c, reqType = authentication context

  [- 2147483610] Fiber has started

  [- 2147483610] Create LDAP context with uri = ldap://10.11.1.15:389

  [- 2147483610] Connect to the LDAP server:

  LDAP://10.11.1.15:389

  status = success

  supportedLDAPVersion [-2147483610]: value = 3

  supportedLDAPVersion [-2147483610]: value = 2

  [- 2147483610] Liaison as a Sargent\

  [- 2147483610] Authentication Simple for Sargent\ to 10.11.1.15

  [- 2147483610] LDAP search:

  Base DN = [DC = City, DC = charlottesville, DC = org]

  Filter = [sAMAccount = sargentm]

  Range = [subtree]

  [- 2147483610] The analysis of returned search results State failure

  [- 2147483610] Fiber output Tx = 308 bytes Rx = 677 bytes, status =-1

  [- 2147483610] End of the session

  ERROR: Authentication rejected: not specified

  I can however run successful AD etc., queries using the following commands.

  show the identity of the user ad-users city.charlottesville.org filter sargentm

  Ideas?

  Replace the below listed command within the parameters of the server:

  sAMAccount name-attribute LDAP

  With

  LDAP-naming-attribute sAMAccountName

  Note: the sAMAccountName is configured correctly.

  Jatin kone

  -Does the rate of useful messages-

• LDAP authentication problems

  Hello

  I am able to get the LDAP authentication works for the VPN, but when I go to test a user that is not defined in the VPN group in the ad, they are still able to authenticate and access to the VPN. I'm at a loss for what is the real problem, because everything seems to be set correctly.

  I joined newspapers in debugging ldap for a user that works properly and that a user that does not work properly. I think that they should be able to authenticate to a group JOB_ADMINS_VPN and if they are not in this group then they should be denied rights of VPN connection.

  LDAP attribute-map JOB_ADMIN_MAP

  name of the memberOf Group Policy map

  map-value memberOf CN = JOB_ADMINS_VPN, OU = VPN, DC = test, dc = net JOB_ADMINS

  AAA-server JOB_ADMINS protocol ldap

  AAA-server JOB_ADMINS (Prod) 10.5.1.11

  LDAP-base-dn DC = test, DC = net

  OR LDAP-group-base dn = VPN, DC = test, DC = net

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-login-password *.

  LDAP-connection-dn CN = saVPNLDAP, CN = Users, DC = test, DC = net

  microsoft server type

  LDAP-attribute-map JOB_ADMIN_MAP

  I don't know miss me something small, but I don't know what I'm missing. Any contributions to this number will be grately apperciated.

  Thank you!

  Please review the below listed config and see what hand you lack of other "sh run" of the SAA.

  Configuration to limit access to a particular group of windows on AD

  internal group noaccess strategy

  attributes of the strategy group noaccess

  VPN - connections 1

  address pools no

  LDAP LDAP of attribute-map-MAP

  name of the memberOf IETF-Radius-class card

  map-value memberOf

  AAA-Server LDAP-AD ldap Protocol

  AAA-Server LDAP-AD

  Server-port 389

  LDAP-base-dn

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-connection-dn

  LDAP-login-password

  microsoft server type

  LDAP-attribute-map LDAP-map

  Group Policy internal

  attributes of group policy

  VPN - connections 3

  Protocol-tunnel-VPN IPSec l2tp ipsec...

  value of address pools

  .....

  .....

  type of tunnel-group-remote access

  global-tunnel-group attributes

  Group-AD-LDAP authentication server

  NoAccess by default-group-policy

  !

  !

  attributes of the strategy group noaccess

  VPN - concurrent connections 0

  Jatin kone

  -Does the rate of useful messages-

• vCenter 5.5 and LDAP authentication

  Hello

  I'm new on using vCenter and had a quick question about LDAP authentication.  I installed vCenter as a device on my ESXI server and it seems to work fine, but when I connect the web client to vCenter I have no single sign on options to enable LDAP authentication

  So I did some research and a few posts mentioned that I had to enable SINGLE sign-on, so I have it configured as embedded will be fine then another message mentioned that I needed set up AD authentication on the vCenter server and ensure that the host to vcenter name was in the area...

  So I want to only LDAP authentication, I don't want to join my VMs to the domain.  So am I missing something?

  Thank you

  To be able to configure SSO, connect on the Web Client using the [email protected] account. With this account, you will be able to add your AD/LDAP as an identity Source and configure the permissions on the objects of the vCenter Server inventory...

  André

• For Cloud SGD LDAP authentication for users and administrators

  Hello.

  I recently completed the installation of my new cloud of SGD 12.1.0.3 on Linux 6.4 (on a virtual machine).

  My question is if it is possible (and how) to enable authentication for new administrator SGD through LDAP accounts?

  We have already our VM hosts configured to allow LDAP authentication to theirs, but how to configure WHO to enable LDAP authentication even as users of server?  Because users are in LDAP, they do not have a local account on the servers, and we do not necessarily want users of WHO in order to connect the servers anyway.

  One of the objectives to use LDAP is that we want to allow users to have only to change their domain/LDAP password and everything else is updated.

  I see that when an account is created in the OMS, the user is created in the repository of OMS database.  I really want to restrict not know them to log directly in the database, but do how this is possible.  Can we still use pupbld for this?  Probably not...

  I read the book below the Oracle documentation, but it is for SGD 11.1 and I'm under 12.1.

  But the same year, he was not very descriptive about how to set up.

  It sounds almost as if you had to take the decision to use LDAP for the installation of beginning of WHO.

  I hope not, and I do not remember that as an option that I have installed the SGD.

  Configuration of Oracle Enterprise repository to use external authentication tools - 11 g Release 1 (11.1.1.7)

  Yes, you can still integrate with LDAP.   Please see the documentation here

  http://docs.Oracle.com/CD/E24628_01/doc.121/e36415/sec_features.htm#CJAGHGAH

  EM use WLS for authentication, so everything that is supported by this version of WLS will work.  Documentation received instructions for OAM/OID/HAD and Active Directory are specified.

  Users can be changed to type external if they are already created in the repository with the appropriate connection name.   Otherwise, new users can be created.

  Also be sure to examine the external roles option, which allows you to map a LDAP group to an external role in EM by using the same name and automatically assigning the privileges required by this group.

• Help: creating a custom LDAP authentication

  Hi all
  
  For some reason I need a LDAP authentication against 2 host servers.
  For this reason that I wrote a function with 2 parameters of user and password. This function is to search on a server to which the user can find and make a simple_bind on the server, return true to bind with success and false for failure.
  

  FUNCTION LDAP_AUTH_GLOBAL_DOMAIN
    ( pUser     IN            VARCHAR2
    , pPassword IN            VARCHAR2 )
  RETURN BOOLEAN
  IS
    l_retval PLS_INTEGER;
    l_session DBMS_LDAP.session;
    l_ldap_port   VARCHAR2(256) := '123';
    l_ldap_host   VARCHAR2(256);
    l_ldap_user   VARCHAR2(256);
    l_ldap_passwd VARCHAR2(256);
    v_login       VARCHAR2(256);
    v_login_result boolean := FALSE;
    v_domain       VARCHAR2(100);
  BEGIN
    BEGIN
      v_domain := GET_DOMAIN_OF_USER( pUser => pUser );
      v_login := v_domain || '\' || pUser;
    
      IF lower(v_domain) = 'mydomain' THEN
        l_ldap_host := 'host.mydomain.com';
      ELSIF lower(v_domain) = 'mydomain2' THEN
        l_ldap_host := 'host.mydomain2.com'';
      END IF;
      
      DBMS_LDAP.USE_EXCEPTION := TRUE;
      --    
      l_session := DBMS_LDAP.init( hostname => l_ldap_host, 
                                   portnum => l_ldap_port);
      l_retval  := DBMS_LDAP.simple_bind_s( ld => l_session, 
                                            dn => v_login, 
                                            passwd => pPassword );
      v_login_result := TRUE;                                      
                                            
      l_retval := DBMS_LDAP.unbind_s( ld => l_session );
      
    EXCEPTION 
      WHEN OTHERS THEN
        v_login_result := FALSE;
    END;  
      
    RETURN v_login_result;
  END LDAP_AUTH_GLOBAL_DOMAIN;

  In the next step, I created a new authentication scheme "Based on the pre-setting plan of the Gallery", entered a name and selected "Custom" as the type of regime.
  The next page, I even ask some values:
  Function name Sentinel-> what I have to do or is there a default check when I leave it empty
  Name of procedure no valid Session-> y at - it a default value, when it is empty
  Name of the function of authentication-> I entered: "return my_auth (: username,: PASSWORD) ' or 'return my_auth' or 'my_auth '.
  Name of the Logoout post-> procedure y at - it a default value, when it is empty
  Activate the attributes Legacy authentication-> does this mean?
  
  On my login page existing I changed nothing, so I still have my processes:
  The Username Cookie value:

  begin
  owa_util.mime_header('text/html', FALSE);
  owa_cookie.send(
      name=>'LOGIN_USERNAME_COOKIE',
      value=>lower(:P101_USERNAME));
  exception when others then null;
  end;

  Login:

  wwv_flow_custom_auth_std.login(
      P_UNAME       => :P101_USERNAME,
      P_PASSWORD    => :P101_PASSWORD,
      P_SESSION_ID  => v('APP_SESSION'),
      P_FLOW_PAGE   => :APP_ID||':1'
      );

  I'm a little uncertain about this logon process, should I change this?
  I've never used custom authentication and cannot find a step-to-step tutorial, by saying what needs to be done.
  
  Thanks for your help
  Chrissy

  Don't know if this is the case, but I think that your authentication functio signature should be:

  FUNCTION LDAP_AUTH_GLOBAL_DOMAIN
    (p_username   IN VARCHAR2,
     p_password   IN VARCHAR2)
  RETURN BOOLEAN
  

• OBIEE 101341 &amp; password for ldap authentication

  Hello
  
  We strive to implement LDAP authentication for our users to obiee using ADSI option. The users passwords are encrypted to the LDAP server. Support for OBIEE LDAP authentication mechanism - only clears passwords to verify the credentials of the user?
  
  
  We tried once in the past to set the LDAP authentication, when we were on 782 Analytics Siebel and Oracle said encrypted passwords don't are not supported for LDAP authentication in this version od Siebel Analytics 782. Now that we have upgraded to OBIEE 101341, we want to try again and see. Any body let me know if the OBIEE LDAP authentication mechanism supports passwords encrypted in the clear.
  
  Thank you

  BI Server uses passwords in clear text in the LDAP authentication. Make sure that your LDAP servers are set up to allow this. No support for encrypted password. Hope this helps

• LDAP authentications fail in APEX

  Is - this 11g support LDAP XE Beta?
  
  We have a number of internal applications works well in the installed 4.0.2.00.07 in Oracle 10 g XE APEX.
  
  Once imported into a new box running beta 11g XE, LDAP authentications fail always, even if the same treatment of connection parameters are used. Someone told LDAP works in APEX to 11g XE?
  
  Colin

  Hi Colin,

  Although I have not tested with 11g XE, 11g supports in general always LDAP. However, starting with 11 GR 1 material (and the current beta version is based on 11 GR 2) you must define ACLs for network access. If you have not done this, you will get no LDAP connection in the database. It is quite a good example of it in the Guide of Installation of APEX: http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#BABBHCID
  I think it is a good example and can be adopted for other users of the database easily.
  If this is not the solution in your case, please post the error message only when authentication fails.

  -Udo

• Help with LDAP authentication

  Can anyone help me please with the fields required for LDAP authentication. My network administrator has sent me the following
  
  LDAP://xxx.xxx.XX.x:389 / o = companyname? UID
  
  Should the host be ldap://xxx.xxx.xx.x or just xxx.xxx.xx.x?
  What looks like the DN? Wouldn't be just o = companyname, uid = % LDAP_USER %?
  
  I tried a bunch of different scenarios against the LDAP test, but not luck. I checked THAT LDAP is working properly by means of other applications that use it.

  First, use Google for some free LDAP viewers. Those who will help a lot, and they usually work approximately 30 days before you have to pay to save them.

  Then, specify the address of the LDAP server in the program, connect and try to find your information. My big problem has tried to get all understood, was that I also had to precede the domain name, something like user domain\username. Once I saw that in the LDAP viewers, and I used the same formula in my authentication routines, everything worked perfectly.

  Among the free that I used was called LDAP administration tool.

  Hope this helps, get LDAP working has been a huge headache until this.

  Bill Ferguson

• Change the role of the user once authenticated LDAP authentication

  Hi forum,
  
  I do know that if it is possible, I have not found a solution so far
  
  I have a simple web application with LDAP authentication. We would like to use LDAP for authentication and store the information of user roles in the database. After authentication, LDAP assigns the role of "guest" to the user and the home page (the only page available for this role) is displayed.
  
  In this home page, the user must select a profile (the same user can have multiple profiles) in a list retrieved from the database. The profile of each user has an associated role. After selection, we want to change the role of the user "guest" to the role associated with the selected profile.
  
  I don't think that implementation of a custom plug-in fits my needs because the role assignment requires the participation of the user.
  
  Any suggestions?
  
  Thanks in advance,
  
  Tatiana.

  Hello

  Well, the problem is that you need to change the subject of the user authenticated, who's a JAAS thing to do. The only way this can work is indeed use a custom LoginModule and then access the user object to add a security principal that represents the role you want to add.

  Frank