clip + and cd mp3

Similar Questions

• Purchase of Sansa Clip and memory card

  I'm about to buy a Sansa Clip. I was planning on getting a 2 GB mp3 and the purchase of a 16 GB memory card.
  My question is, will they work together? A 16 GB card will work in a 2 GB drive? And the memory card should be SanDisk or can it be any business?

  Your help and your answers would be greatly appreciated!

  The Clip doesn't have a slot for card, only the Clip + and Clip Zip. Any size to maximum 32 GB will work. Any brand should work, but there has been reports of some brands does not not with the Zip model. That was supposed to be addressed in an update of the firmware, but to play in the trunk, I'd buy a SanDisk brand.

  And you can consider getting a larger capacity of 2 GB player. The extra cost is not much, and this extra room will be useful. Music libraries tend to develop, especially now that you have a cool gadget little listening to load them on.

• White letters/name of the file is displayed in the lower left side of the video clip and photo in my Windows Movie Maker slideshow

  This only happens to a music video and a photo.  I removed the clips and replace them again and it still happens.  I can't find a way to remove the white titles from the images.  Help?  I don't know if I have Vista or XP...

  The same letters seem if you watch the video in Windows Media Player?

  In Movie Maker - timeline view... Look at the track "Title Overlay"... If there is
  the unwanted titles here... right click / delete them.

• Questions on Clip + and (Clip + vs Fuze) Fuze

  Hello

  I'm going to buy a 8 GB Clip + or Fuze 4 GB, and 8 GB microSD. I read a lot of Clip + vs Fuze subjects, a lot of comments, but it won't get me anywhere, I'm still not sure that one would be better for me. You would help me a lot if you answered my questions. Even if it's subforum Clip +, and I assume most of you have Clip + or it's your favorite, please be fair with me on both players.

  (1) who has the better battery life? How it will change over the years? What happens if I listen to mostly FLAC?

  (2) that best understood earplugs?

  (3) do rockboxed Fuze sounds better than rockboxed Clip +? I heard that the rocket gets better EQ.

  (4) a port USB owner fuze. Does this mean I have to buy something more to connect it to the pc?

  (5) I saw the comments from users on both players in the review of the comments. There were many people who were not satisfied with the rocket because "it does not work, will not connect to the pc, I got white screen" etc. etc. when nobody said something like that on Clip +. " Is Fuze very much likely to get in the mess or is it just because more tech newbs like rocket?

  (6) I'm listening to binaural beats. Fuze and Clip + with caps default enough for this task? (the question is probably for those who also listen to binaural beats)

  (7) what (V1, V2) version of both players is better and why? How to know the version of the player before buy you? Can all be rockboxed?

  (8) this wall charger will be ok with rocket or Clip +? http:// www.acme.eu/en/Catalog/chargers_and_rechargeable_batteries/battery_chargers/acme_charger_ak03_for_mp...

  (9) Fuze 4 GB or 8 GB Clip + (both with 8 GB microSD)?

  That's all for now. Answering these questions would probably save me many sleepless nights I have when thinking about which player to choose thank you

  PS Sorry for my English

  1 fuze has a battery more large and the greater autonomy.

  2. I think they are the same (and you have to provide your own).

  4. the cable comes with the "rocket".

  5. people always have problems with Tech - the same with Clips.

  6. you will probably get a v2 at this stage.  Rockbox is being developed for both versions.  I'm not aware that there is a difference from the point of view user between v1 and v2 - it's intestines that have changed.

  7. Yes.

  8. it depends, as always, your needs.  Wheel scroll, video, screen, battery life: Fuze.  Size, clip, factor of kindness: Clip.

• Battery clip and 2 GB of storage

  It's no big deal I guess and I'm sorry if it has been said before, but I have two minor issues with my new Clip.

  When it is plugged into my laptop and I look at properties 'internal memory', he said that the total capacity is 1.8 GB instead of 2.

  Also, when I look at the properties of "Sansa Clip 2 GB", he says that the battery is 78% charged even after 3 hours. Let it load for another hour, but it still says 78%.

  I wonder if this is normal or if I have a duff one.

  Other than that, although I am impressed by it.

  DARCAL wrote:

  It's no big deal I guess and I'm sorry if it has been said before, but I have two minor issues with my new Clip.

  When it is plugged into my laptop and I look at properties 'internal memory', he said that the total capacity is 1.8 GB instead of 2.

  Also, when I look at the properties of "Sansa Clip 2 GB", he says that the battery is 78% charged even after 3 hours. Let it load for another hour, but it still says 78%.

  I wonder if this is normal or if I have a duff one.

  Other than that, although I am impressed by it.

  1.8 GB sounds just as with hard disks and flash drives and things of CD and DVD are calculated from base 2.   1 KB = 1024 bytes = 1024K to 1 M 1 GB = 1024 MB.     1.8 GB = 1.93 billion bytes.  There is little space used by the Firmware and a database used by the player.

  If you format before you add your own songs, you can make and delete Freebee songs that were on the player.  Then reload your own music.

  When you check your battery, voltage of the clip (turn off the video, wait a second, turn on the clip) and check.   Go to settings > system information > % of power

  If this power is 78%...   Then try to load the video adapter or the ports on the back of your computer.   It is possible that the voltage of your USB port is not sufficient, or an indication of the clip is not properly read the power or battery clips is lower than expected.

  All my clips were able to load to 100% (but always check on the clip) not through windows Explorer/properties...

• Updated my new Clip and all the music is gone

  I just updated my 8 GB, to the 2.01.32 clip, and then all of the music has disappeared off the coast of the gripper, but when it has been connected to Rhapsody, Rhapsody said it was all there. Then when I disconnect it, the clip is empty.

  So I reformatted and recharge my library.1 hour and 8 minutes remaining.

  OK, I got all the music reloaded

• How can Windows movie maker, I stop the music to a certain clip and not replay

  How can Windows movie maker, I stop the music, play a certain clip and not play again?

  1. Add the video file.

  2. on the home tab use Add music to add music to the full clip.

  3 move the vertical slider on the film to where you want the music to stop.

  4. on the Edit tab, select Split.

  5. now, using mouse cursor select just the audio running along the top of the video AFTER your split point.

  6. press delete on your keyboard.

  You could also do it by reducing the volume of the section of audio after the split to zero.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• missing clip and the print in the toolbar icon

  HP deskjet F 2400 series (real F2480) running on Windows 7

  I used to have an icon in the toolbar in Internet Exploer that allowed me to print a clip of any web page, but now the icon is missing

  and I can't find it any where, have tried to uninstall printer and software and reinstall, but that did not help, Hmmm?

  Thanks Mr young, I now have the clip and reprint facilitated return, although in a different form of the original I

  had to install yet another toolbar called Bing that I didn't really, but the means justified the end thanks again

  Sonoferic42

• Put clip and rough timelines cut in different panels?

  I do a rough cut and then when I click on a subclip in the project Panel, opens this chronology of a subitem in the same panel as draft chronology.

  So I have to manually switch between open items to move back and forth (even if a subelement for fucks project automatically adding switches to Panel first edit.)

  Is it possible for the first mounting and subitems in their own panels, open all the time? Or have two monitors up to?

  I detach Panel, remove the Panel group, click another location, sliding, but nothing seems to separate them.

  Vincent

  Hi Vrvince,

  Thank you to accentuate your confusion.

  In fact, it is not possible to have two instances of chronology. At the same time, you can only view the clip or the scripted.

  If you have several screens up, you would be able to detach the timeline to all other monitors and access to the larger screen, but you can have an individual calendar on different monitors.

  Prelude supports this functionaly for monitor Panel for reading. You can check this Edit-->--> reading preferences. You would be able to view media on multiple external monitors in total.

  But once again the same media file would be visible on all monitors, not the different that you try to view the calendar.

  Adobe Premiere Pro supports 2 views at the same time which is a monitor of the program and the other on the Source monitor. You can use both to see clips and sequences (ruffcut) the same slave. You can see this creative cloud.

  _________________________

  However, it should be a nice feature if we can have several instances of chronology; clips on a monitor and rouughcuts on the other.

  You can submit feature requests to the things you want to see as a prelude to the http://www.adobe.com/go/wish. We will surely discuss this.

  I hope it helps. Customer feedback is important to us. Keep writing for any clarification.

  Thank you

  Mayjain

• Rate of change speed per cent not available for my CC PP clip and Stretch

  Hello world

  I put in a graphic and loaded on the timeline where a a second term 4plus. I added a Lens Flare effect that I forced around the chart, so the Lens Flare effect would be to only the graphics area of the screen. Now I want the effect to cross the fastest graphics enhance the overall effect. When I right click on the clip and go to the speed / duration option, the percentage of the speed window is grayed out. When you try to use the rate Stretch tool, there is a red line through the icon.

  Any ideas about what is happening and what I can change to make the weather changes?

  
  

  Thank you

  
  

  M

  A graph has no speed. Extends the graph using the adjustment tool.

  For stray light to move faster, you must adjust the keyframes from the center of flare.

• Remove the clip and ditch

  In first Elements 11 :-quand I will delete a picture of the timeline in the unique picture show, the 'delete and close gap' menu edit or delete tab - just delete the picture, BUT DO NOT CLOSE the GAP!

  What's wrong?

  P.Konrad

  The first screenshot you posted showed the "orange" on the transitions, which suggests that you had not made the timeline transitions to get the best possible overview after you have applied the transitions. In this State, I had no problem with delete and remove and close the space in my tests here.

  In the second screenshot you posted showed the complete timeline content made... no 'orange', just 'green' which implies that you now see the best possible overview. Once again, in this State, I had no problem with delete and close the space in my tests here.

  Of what you just wrote, it seems that you had problems with delete and remove and close the space in the first case (with UN-rendered transitions), but didn't when the entire contents of the chronology has been made. Is this correct? If so, I can not confirm this difference.

  Screenshots of first and second do not seem to show the same clips and are probably in another part of the timeline. In this case, I assume that you have the content above the part of the timeline where you experience the problem.

  Right now it sounds like you have all this work. This is important. But I would ask you to consider what I wrote just to determine if this applies to your specific situation.

  Thanks a lot for follow-ups.

  I misintepreted of your activity and results, please do not hesitate to let me know.

  Thank you.

  RTA

• Is it possible to avoid clipping and capture?

  With a large fireplace of the Audio and video tracks, it is virtually impossible to avoid clipping and capture when you are working on a music video. Move the clip somewhere else will be snip everthing along the vertical plane. Turn the clip (i.e. lying), ditto.

  I've been able to deal with that with a lot of time and effort work around: that is to say, moving the clip to the absolute end of the video and work on it there.

  If I do an adjustment of the video clip in place, I need to move each audio along the vertical plane to a remote location, in order to attach the audio into small fragments.

  DuPont, he knows in a way simple to avoid clipping and capture, or is what one of the blinding headaches to accept when using Premiere Elements?

  HR

  RoysScreenName

  I don't know if we have discussed previously, but a way to keep control over the Organization and adding clips to an existing timeline is to hold down the Alt key on the main keyboard to the computer that you use the mouse cursor to add your clip to the timeline or move things. There are those who prefer the CTRL key for this. But I stick with the ALT key and it works for me.

  Another approach is interesting, if you have not experienced it yet... If you have a block of clips you want to move, take your mouse cursor to select them all (in total), and then click done drag the highlight which will include everything in it.

  What follows is the point of view of Adobe Premiere Elements and organize clips on the Timeline

  http://help.Adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. HTML

  Please consult the bulletin and then let us know if everything above the target your concern of workflow.

  Thank you. Later.

  RTA

• Clips and creating a model

  Hi all

  Is it possible to say a video clip, audio clip, and a title of group and save them as a template? I tried to do this via the menu, but it doesn't seem to be an option.

  I have a fixed image that I apply an animated title on and play as an audio clip with my title of outro in a set of videos and I would love to just save all and import them into Formate model to other videos I do to save me from their creation at each time all. I do not have the clip of the real title as a model, but it would be good to have all the.

  Is this feasible? Or is there another method to get something like that?

  1 million thanks!

  ~ J

  Export just the space bar to work for this purpose. .

  That area, you set by placing the head to the beginning of the section... and pressing Alt-[for the start of the WAB

  [and then reset playing with your head at the end of the section you want and pressing ALt-] for the end.

  When export check export workspace.

  You can also copy and paste (lasso them) assets selected your sequence in a new sequence.

• How do they affect times a clip and the clip from movie of child in the same function?

  I have really two questions: how both affect a clip and the clip from movie of child in the same function? and how to get information of a component in one service for another?

  My basic setup is a clip of choice of fonts, one on each image: "bodyText_mc." Each of these frameworks has a clip of the child 'bodyText_mc.bodyText' with choice of alignment for the police. For example, the user chooses 'Script' in the first ComboBox, then selects "Align right" in the second. (This text is static, because I need more great design control I can get with dynamic text.)

  First of all, I have a combobox "cbBodyFont" that I use to go from one image to the image on movieclip 'bodyText_mc.' It works fine:

  cbBodyFont.addEventListener (Event.CHANGE, changeBodyFont);

  function changeBodyFont(e:Event):void {}

  var bodyFontFrame:String = cbBodyFont.selectedItem.data;

  bodyText_mc.gotoAndStop (bodyFontFrame);

  }

  However, if I also want to assign a child element of "bodyText_mc", like this:

  cbBodyFont.addEventListener (Event.CHANGE, changeBodyFont);

  function changeBodyFont(e:Event):void {}

  var bodyFontFrame:String = cbBodyFont.selectedItem.data;

  bodyText_mc.gotoAndStop (bodyFontFrame);

  bodyText_mc.bodyText.gotoAndStop (2);

  }

  It won't let me. Add a command to the clip of the child 'bodyText_mc.bodyText' runs to a null object reference error. I can affect the parent element or the child element, but not both. Why?

  And part 2 of my question:

  I have an another combobox "alignBodyCb" that I use to go from one image to the image in this child clip "bodyText_mc.bodyText". The user selects Center, left, or right alignment.

  alignBodyCb.addEventListener (Event.CHANGE, changeBodyAlign);

  function changeBodyAlign (e: Event): void {}

  var elementAlignBodyFrame:String = alignBodyCb.selectedItem.data;

  bodyText_mc.bodyText.gotoAndStop (elementAlignBodyFrame);

  }

  The problem is that when the user switches to a new image of "bodyText_mc" with the changeBodyFont function, always, it goes to frame 1 of the child clip "bodyText", change the font, but back to the alignment of the centre. I need the font combobox to "remember" the active data from the drop-down list alignment, can still send the clip of the child to that frame. What I want is something like this (although it obviously does not):

  cbBodyFont.addEventListener (Event.CHANGE, changeBodyFont);

  function changeBodyFont(e:Event):void {}

  var bodyFontFrame:String = cbBodyFont.selectedItem.data;

  bodyText_mc.gotoAndStop (bodyFontFrame);

  bodyText_mc.bodyText.gotoAndStop (elementAlignBodyFrame); <--(l'image sélectionnée par fonction d'autres combobox)

  }

  alias "go to the frame (do) that they just took and then send the clip of the child to the frame (alignment) they chose earlier."

  Help? If I'm going about this wrong in the first place, I am open to that, too.

  SWF file attached for Visual reference. (Not everything works yet, but the Type of body section is where I concentrate for the moment).

  Just to avoid any confusion in the timeline (not yours, Flash), I recommend alternating the movieclips bodyText of one layer to another with empty frames between those on the same layer.  Funny things can happen when you have adjacent keyframes of the things, and giving them the same name may be composed the strangeness is at stake.

  If kGlad wants to take action to tackle the rendering event thing, it's OK, but whatever it is, I don't think that it is involved in what I mean.

  All I'm saying is that when you go to a particular frame in the bodyText_mc, you must run this second line of code here and not back where you had it.  If you want to move the command for the bodyText movieclip go to a frame inside the bodyText_mc on the frame where it lands in your first line of code.

• How to create a movie clip and place the other clips to move inside?

  I followed a tutorial of ping pong (http://www.webzo.org/tutorials/flash/ping-pong-ball-movement.php).

  In the fourth step, it is said to

  4 - inside another Clip named 'Limits' place 'Pads' and the 'wall '.                           Name of the instance of the pads should be "Pads" and instance of the wall called "border".
  We put the wall and trim inside the same Clip, to use it in order to know when the balloon is collided. And we could not put everything together because the ball behaves differently if hit the wall instead of the pads.

  How to create this clip and put the other clips of film "inside"? Also, if anyone can find, where should I put this clip? Should I put it in the same place as the wall?

  Please help out me.

  When you double-click a movieclip to open for editing, you have a work space to put things inside this movieclip.  That's what I call its Stadium.