Completely insensitive Sansa Clip

Similar Questions

• Sansa Clip is insensitive (malfunction)

  To start things, I've owned a Sansa Clip 2 GB for about a month now, and I never had any problems with it until today... even if I'm to blame for causing its functioning. Is how he dropped it when I was trying to get some songs from my Mac sisters I wanted (my laptop is Vista, so suddenly I was not familiar with the change in systems), I don't a not eject the Sansa Clip correctly the USB. He ended up screwing up, and now I can't make it work because it tends to freeze when I turn it on (after holding the power button for 15 seconds or less). Does anyone have advice on how I can fix this, or to all least able to reset it so that it can work? By the way, thanks in advance.

  Basically, you can run a check on it as if it were a generic drive (say a hard drive or a USB "key")

  the exact command depends on you and the operating system, fsck, chkdsk or (for example xp) right-click on the sansa msc mode (should appear as a removable USB - say-), properties, tools, check now.

  as an alternative, if you know that you can just re - put songs on the clip without having to purchase them again, simply reformat the drive, there is a specific menu settings entryunder.

• Headphone Jack does not fit into my new Sansa Clip +.

  Hello

  I just bought a new Sansa Clip + so I could listen to my songs while he's on vacation, but when I put in my profile 3.5 headphone jack into the hole on the side of the mp3 player, it will not thoroughly and grave if I don't hold him properly. That is how a Sansa Clip + is? because I found it very boring.

  I hope someone can answer quickly because I'll be on vacation in a week about. And sorry for my English because it is not my mother tongue.

  When the player is again taking is very tight and it takes a little force to get the plug completely.

• Sansa Clip + doesn't turn on

  I need to know how to get a replacement for my Sansa clip.  It was purchased through Amazon on 2.19.14.

  It lights when not connected to the computer.  It remains quite dead.  It lights up when it is connected, and it is recognized by the computer.  I am able to transfer files when it is connected to the computer.  As much as I know it was not dropped or damaged.

  I tried things.

  I tried to reset the player several times.

  I tried to reformat the drive

  I plugged in the charger and left more than 2 days.

  I have it plugged into the computer and he left.

  Always as soon as I disconnect the computer it goes completely dark.

  http://www.SanDisk.com/about-SanDisk/contact-us/

  http://KB.SanDisk.com/app/rmaform/session/L3RpbWUvMTQyMTUyMjEwMC9zaWQvamE0S1JIY20%3D

• Sansa Clip + problems, correct the records but unknown marking and scrambled the tracks. Help!

  Hi guys,.

  There can someone please offer some advice for me and my husband before we became completely crazy?

  We bought for our daughter the Sansa Clip +, but we are having the same problem occur over and over again.

  During his music and audio books have first been loaded above all was fine. Added items displayed in the files and the right places but, now, for some reason when we add anything, the record of the album can be seen, but it also creates an additional folder that displayed as "Unknown". When you go and try to play inside this folder it does not work... "We always ensure that there is proper use of marking we MP" tag, so I know that the questions are not because of it.

  We have tried everything we can think of. Tried to update but I think we already have the latest version installed in any case - V01.02.18P, performed a factory reset, put in shape and I have tried using different modes, but it makes no sense. Why everything fine was a couple of days and not now...

  We use a 16 GB Kingston SDHC Card inside the Clip +.

  Please any ideas would be welcome because it becomes a nightmare.

  Thanks Claire x

  I should add that I am starting to think that I can have bought a card SD of FAKE writing is rubbing on the front of the card... IS this likely and if so could cause of the issues I am currently experiencing? XX

• Sansa Clip + connect to Volkswagen Golf Mk7

  Hi guys,.

  I recently had a VW Golf 7 and I tried to connect my Sansa Clip + with it via USB.

  It work well.

  The device is in MSC mode and Yes to THE works perfectly, but not what I want, I want to know if there is a way to make it work by USB.

  In MTP mode, the device connects and 2 readers (internal + microsd) are visible, but I can't load anything on them, and finally, the display shows just "dysfunction." In MSC mode, it looks like he wants to connect to the Clip +, there is a message on the screen saying "connecting to device" or some thing like that and my Clip + says that it is connected and reading. Charge the battery via the USB port works perfectly. However, after a few minutes of this "connecting to device" message, nothing seems to happen and the Clip + is not recognized by the stereo.

  Any ideas?

  Thank you!

  EHR says:

  I could do this, but then the Clip + is completely useless to me because he got only 8 GB of memory, almost all of my music is on the SD card.

  So I guess I have to just get a micro SD to SD card and use it in my car instead. It's kindof a shame, but good

  What's a shame? That's what I do. Why place wear & tear on your drive when if you load all your songs to an SD card and use a card reader to plug into the USB port on your car stereo, it will do the same. And you're not submit your player to extreme and/or cold, heat inevitable finished autonomy or eyes curious thieves potential when you park the car.

  USB and SD (micro or full size) cards are very cheap. You could even buy a card, that copy you music to it and leave (as well as the card reader) in the car. In this way, you do not remove the card from your player all the time and having to wait for the updating of the database when you put it back in it.

  

• new sansa clip more 8 GB not detected but charge

  I got a sansa clip more 8 GB as a gift. new but old stock. everything works fine. except this is not detected by the pc. It will load.  I installed the drive, but I think that it isn't installed rhapsody. can I completely ignore the part of the Rhapsody? total newbie to mp3 sansa. I'm using windows media player 11, vista ultimate 64-bit version

  Miikerman wrote:
  As ends in General, no matter what Generic USB cable with straight plug should be fine with your drive. My hunch is that there may be some problems with the USB cable you have tried (something that you might want to check, by the way). Sometimes I use the USB cable that came with my Clips, sometimes I use one of my many generic not cheap-o cables; six of one and half a dozen of others - they all work very well.

  There is there the cables that don't transfer data, only the fee...

• Sansa Clip + starts charging fully charged once more again

  My Sansa Clip + has been completely cut and I plug it into the computer to charge it.

  He has been in charge for about 3 hours and the animated indicator said he was almost completely reloaded. I take a quick shower and when I came back, I noticed that the trial load has been started again. The indicator shows u completely discharged battery and charge process now...

  Bug is fixed in the new firmware! Sansa Clip + Firmware 01.02.09 update

  However, they say nothing about it in the notes, but it works for me!

• Order of red herring Sansa Clip 8 gb

  Hello, I'm new to this forum, unfortunately I couldn't find a solution for my problem using the search option.

  I tag my mp3s (primarily audio books) with MP3Tag v2.43. So far, everything worked fine, I gave all the tracks of an audio bouguerra (several CD) the same album and the name of the interpreter, but different titles (usually, I put the title = track number). But now I encountered a problem with an audio book consisting of 153 other titles. No matter how I name securities securities (they show the correct order in mp3tag), they appear in the mess on my sansa clip, for example, in this order:

  010/153

  020/153

  ..

  100/153

  110/153

  ..

  001/153

  011/153

  021/153

  031/153

  ..

  101/153

  111/153

  and so on...

  Is anyone know about this problem and how to solve? I even deleted all the tags and created completely new, the problem occurs again.

  The way that you are their numbering can be confusing the player. I do not think that it supports A / B numbering. Instead of their numbering "001 / X", "002 / X", "003 / X", etc., try just of their dial "001", "002", "003", etc.

  Additionally, make sure that MP3Tag is set to write your tags to ID3v2.3 ISO 8859-1 format. Other ID3 formats are not supported.

• My NEW Sansa Clip 8 GB jump audio during playback

  Hi all!

  Yesterday, I bought a new Sansa Clip 8 GB with FM Radio and today I try. Well, some fat is a problem: my Sansa skips audio while playing songs, as happens when a scratched audio cd is reproduced (do understand you?).

  Initially, happened after one minute of play (on all the songs) but now it happens early on and listening is impossible.

  I don't understand what the problem is. The Sansa is NEW.

  Firmware version is 02.01.32A

  Any help would be greatly appreciated!

  Thank you.

  Giulio.

  Problem solved, after upgrading the firmware to the latest version, although the problem was not the firmware.

  The problem is on a fault line desing of the Sansa. The male jack to the headphones should NOT be inserted completely into the socket because otherwise, either you hear anything like that or you ear the Sansa jump audio. It's amazing. The engineers who designed, which should be fired instantly.

• 4 GB sansa clip + songs

  have 4 GB sansa clip + it only has 330 songs and says its almost complete, what did I do wrong charge off the coast of the ps3. is there something I got wrong im new to this 1st mp3 player part any help would be thank you very much once again. He plays all of the songs on it now

  You didn't say what format the songs were in, or how fast they were. If you load format FLAC or WAV (as opposed to the format mp3 for example), then I could see where your memory may be full.

• Sansa Clip barely working

  My Sansa Clip works more yesterday, I don't think it was even after connecting it to my PC. The problems:

  • When I try to play music, it starts in mode 'break '. Won't even play when I 'force' in playback mode
  • slow start and stop times
  • I can connect to my PC, but the only display of file is DevIcon.fil (182 612 bytes)

  Can't use it and I have no ideas left. It is completely charged, about 40% used space, the firmware version is 02.01.32F.

  On your Clip, try the settings-> Format.  Note that any music currently thereon is erased.

• Sansa clip 2 GB trying to load but quit unexpectedly

  My Sansa Clip 2 GB begins to demand, but stops after about 20 seconds.  It remains always connected the rest empty battery icon.  For this reason, I can't keep the unit to perform all operations.  Help is appreciated.

  The problem was solved by Sandisk.  Their solution is shown below:

  If the player does not load, there may be more than one reason.

  First of all, your Sansa Mp3 player should be charged when connected to a computer that meets the system requirements:

  -Windows XP or Vista
  -Windows Media player 10 version 11 or

  Initial charge time is 3 to 4 hours. The State of the battery will be completely shaded when completely charged.

  Second, if your reader part or all memory is damaged, the player again to read the memory over and over again, so it drains the battery more quickly, to format your Sansa Mp3 player.

  Note: Set FORM WILL ERASE all DATA ON YOUR DEVICE. MAKE A BACKUP OF ALL YOUR FILES ON YOUR COMPUTER.

  1 turn off the player. You may need to slide up and hold the switch to completely turn off the player.
  2 Activate button (orange must be visible) and press on and hold the Center button while connecting the player to the computer. Don't let go no these key until you see connected status on the player.
  3. single right click workstation in your office. Choose 'Manage' in the menu. In simple window computer management - click on disk management in the left pane. Search for "Removable disk" icon with a drive letter in the right pane and right-click and select "Format".
  4 make sure these fields in the Format dialog box:

  System files = FAT32
  Quick format cannot be verified

  5. click on start. Confirm on the notification.

  6. test the device to transfer music to the player.

  Finally, this is due to the firmware corruption or failure. We need to upgrade the firmware of your player manually to delete this type of corruption.

  Sansa Clip Firmware download Update:

  1. turn off Mp3 player
  2 turn the unit on hold (move, hold down the button until it shows orange)
  3. press and hold the Center button
  4. connect the mini connector on the device (don't forget that the USB is connected to the computer)
  5. download and extract the .zip file to a folder on your desktop:

  Click here for the Sansa Clip Mp3 Player Firmware update file

  6. Once extracted, drag the file or copy the *. BIN file in the directory root of your Sansa Clip.
  7 disconnect the Sansa Clip and let it restart.
  8. the update of the firmware will now begin.
  9 once he finished finally make his update, it will start back upward. After his return to the main menu, go to 'Settings' > 'System Info' and check the 'Version' is now 01.01.30A.

  To completely register your product, please provide the following information:
  -What is the operating system running on your computer?
  -The computer make and model.

  You can also visit http://kb.sandisk.com, our keyword online searchable knowledge base questions, to easily find answers to your Technical Support and Service the customer for all SanDisk products. Simply enter your search terms and our knowledge base will search a vast database of frequently asked questions as well as our forums online at http://www.sandisk.com/forums for you to provide the most complete answers possible.

• Problems of sound quality with my Sansa Clip and Rhapsody subscription titles

  I'm at my wits end here. This last Christmas, I bought a black 4 GB Sansa Clip for me. About two weeks after I bought it, I got a low-memory error to create a database. I've reformatted the drive, transferred songs and everything worked fine... for a week. Then I got the same error message that he died completely. As in it would not turn on at all, even connected to my PC.

  I brought instead buy one leave and received a replacement. Now it will not play long pieces of subscription Rhapsody without a slight distortion starting about 13-14 minutes in and continuing to the end of the track.

  I did not have this problem with the first Clip.

  I don't have this problem with securities that I torn and transferred.

  I don't have this problem with my c250.

  I have this problem with my 4 GB Clip son cash. However in addition to the simple to burst I get with my Clip, the music also sounds distorted, with large legs on her.

  I already have the routine of songs and dances for Rhapsody. I have also updated the firmware of these two Clips Sansa to v02.01.32a, tried to transfer using two different USB cables and several USB ports on my computer. The only thing I have not done is reformat the thing. After having to transfer 600 + tracks 3 times in two months, I am rather hesitant in doing so.

  Anyone, please, help me solve this problem?

  Ah, we'll add some gloss of your clusters.

  The your Clip file allocation table a wee 4 KB clusters.  Since you have a 4 GB device, this FAT is big enough.

  Decoding of the Rhapsody tracks requires some supercomputers, being secure to 160 Kbps wma files.  The Clip is responsible for finding the next block of data, but it must focus on this huge FAT.

  The solution is simple!

  Turn on your trusty Clip.  Go to settings > Format > Yes.  This reformatted the device with 32 KB clusters, optimized for the Sansa.

  Please note that this will delete all existing music to your Sansa, and you will need to reload.

  On the other side of the coin, you will hear now own sounding music!

  If you format from Windows, it has the bad habit of formatting with teeny 4 KB clusters - and stuttering that results will make you crazy.  If you format Windows, ALWAYS follow-up with a format on the device via the parameters.

  Bob

• Can not leave completely insensitive - Firefox, use Safe Mode, reinstall or uninstall

  I installed Firefox less than a month ago. Two days ago, that he left suddenly during the navigation. This does seem like a problem, really - I thought I would just restart - but it REMAINS open. Shows the icon in my dock (on Mac), and the menu bar appears when I click on the icon. I can browse the menu selections but can not choose one.

  I can't:
  -Leave Firefox - from the menu or with Ctrl + Q
  -Open a new fenΩtre
  -Open help
  -Access to "troubleshooting information.
  -Select "restart with modules disabled...". »
  -Use the Safe Mode

  Because I can not use Safe Mode and cannot leave the program, I have IMPOSSIBLE:
  -Uninstall (it refuses to remove, because the program is 'open', as it won't leave)
  -Reinstall (I can't substitute the existing because the program is 'open')
  -Remove my dock
  -.. pretty much anything else.

  I've read many articles dealing with troubleshooting, Safe Mode, reinstall clean, etc, but unfortunately I can't make one of these because Firefox is open but completely insensitive.

  (PS - I tried to install the below troubleshooting information, but, even once, because Firefox is not responding, I couldn't open it lol - there was "no application available" to read it.) I can't go through the manual steps because I cannot access the troubleshooting information in the Help menu and so cannot even begin step 1.)

  If anyone has any suggestions, I would be VERY happy! I thank very you much for your time and help!

  If qutting, it's because of the questions are now trying down option as you click the icon in the dock and choose force quit from the list!

  Also you have tired Fox fire rest functionality (otherwise said if your power to access)
  To do:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.