clock guard no precise time despite it 3 times today changes?

Similar Questions

• Satellite L640 - clock stuck CPU idle time

  Hi people, I have a Satellite L640 PSKOLA, with a processor i5 480M and am under Win7 64 bit, I have a "CPU usage" widget on the desktop, because clearly, I'm kinda a nerd. I first noticed this problem for a long time, but my usage has changed more things graphics lately and if it interferes with what I'm doing now.

  The clock on the CPU freezes at 1173 MHz, this happens only after the machine has been for a while and will be rectified by doing a reset, after which the clock fortunately returns a maximum of 2667 MHz and the changing dynamic clock works as it should, and I enjoy my machine once more, until it happens again which could be any time, but it usually takes at least a couple of hours.

  I hoped that would fix it, install the latest drivers but that didn't work, I reinstalled the version 2.3 BIOS update (the more recent on the toshiba site) and I installed it three times because I thought it might have been a glitch there.

  Any ideas?

  > On the CPU clock freezes at 1173 MHz, this only occurs after the machine sat for awhile

  How did you test this? Have you tested this using the CPU on the desktop gadget?
  Are you sure that this software works correctly? I think that no one should trust a single value provided by a program/utility.
  Use of different tools which can give different results

  However, the fact is that i5 480M processor supports Enhanced Intel SpeedStep technology.

  This technology allows the processor clock speed to be changed dynamically. This reduces to a minimum power draw and heat dissipation.
  A processor running at a high clock speed allows better performance.
  Using the same processor at a lower frequency (speed), it generates less heat and consumes less energy. This is controlled by the Enhanced Intel SpeedStep technology.
  I think this may be one of the reasons for this different CPU speed (perhaps the main reason).

• Clock showing the correct time to almost every time when connecting

  Original title: clock wrong, lot of time whenever I connect

  My clock is constantly with the wrong time almost every time I connect and I have to readjust it.  Can anyone help?  Also, I tried live help, but for some reason that Microsoft would not accept my product key, I know it's the right key.

  I also seem to lose my time 12 settings of the clock all the time too, and he keeps returning to the 24 hour clock that I hate.  And I often do not remember how I changed it in the first place to return the parameters of what I want.
  Any help appreciated.
  Help with my product key I type in directly from the email that Microsoft sent me live also really curious to know why I can't get online?

  Try this workaround:

  1. Type "schedule tasks" in the search field of the start screen of windows or via the menu of charms and open it.
  2. Expand - Library of Task Scheduler > Microsft > Windows and you will see - synchronization of the time, almost at the bottom of this list.
  3. Double-click the "SynchronizeTime" task and go to the tab "triggers."
  4. Click 'new... '. »
  5. You will see a drop-down list next to the text that says "begin the task:" at the top of the window. Select the option "at startup" and click "OK" to save and close the relaxation. You will then see your new trigger on the list in the task. Click 'OK' to close the task.
  6. Close Task Scheduler.

  Time system MUST synchronize now to start and pretty much solve this problem. There may be a delay while your computer connects to a network. Time synchronization may not work if your clock is off by a significant deviation from the server.

• Setting the main clock on PST - I'm on IS - how can I change?

  I have the HP 8 G2 1411 tablet. The main clock seems to be set to PST. I have set the clock of the House to the EAST, but have not figured out how to change the main clock in the EAST, or in other words to just change the main clock at my local time.

  Hello

  Please try

  Tap Settings,

  Touch Date time & (scroll down to system).

  Press Select zone

  You can set the date automatica & time too.

  Kind regards.

• Using AS2 to get the time and change according to result

  I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.

  This is the code that I've been using

  var currentHours:Date = new Date();
  var currentMin:Date = new Date();
  
  
  timeInHours = currentHours.getHours ();
  timeInMin = currentMin.getMinutes ();
  
  
  var today: Date = new Date();
  shownow = now.setMilliseconds;
  
  
  
  
  If (timeInHours > 4 & & timeInHours < 11) {}
  breakfast_mc._visible = true;
  breakfast_mc.play ();
  dinner_mc._visible = false;
  dinner_mc.stop() ;
  / / trace (timeInHours);
  } else {}
  breakfast_mc._visible = false;
  breakfast_mc.stop ();
  dinner_mc._visible = true;
  dinner_mc.play() ;
  / / trace (timeInHours);
  }
  trace (timeInHours);
  trace (timeInMin);
  Stop();
  Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.
  I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this
  ? I need time to change at 05:00 and 10:30.  There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.
  function checkTime()

  {

  dat var = new Date() ;

  var h = dat.getHours (); / / 24-hour format is already...

  mn var = dat.getMinutes ();

  / turn to the last limit of 15 minutes /

  //mn = Math.floor (minutes/15) * 15;

  
  

  / / OPTIONAL - add zeros to the hour and minute

  if (hr < 10)

  hr = "0" + hr;

  if (mn < 10)

  mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due not
  
  
  retour hr + mn ;
  }
  
  
  usage example:
  time = checkTime();
  trace (time);
  Any suggestions are welcome. Thanks in advance!

  If you want to do something when the user time is between 05:00 and 10:30, use:

  var d: Date = new Date();

  If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()=""><>

  No matter what

  }

• My Airport extreme and Time Cap. both lasted 14 months, what happens with that. Time to change brands?

  My last two routers in Apple both lasted 14 months more I had an arrival of DAO. Of course, both just went out of warranty. My current A.E. seems must be reset to zero every day even if it is shows that it works, my devices loose their connection. Rebooting solves the problem for a short period. Hard and soft resets it have done and that does not help.  Now, the yellow light flashes and the utility Airport says that it may be overheating. I just it's time to change brands.

  Your Apple router is covered by the Applecare, extended warranty on a computer, ipad, or apple TV.

  The program is quite generous... you can buy an apple TV now (Gen3 is fine) and buy on what is cheap apple care. It covers all airport bought up to 2 years earlier. So take your defective AE at the apple store... Buy Apple TV and its applecare... do not open the Apple TV... Get your replaced AE... Then, get a refund on your Apple TV. It's a little sneaky, but only if you don't have applecare...

  In the European Union or many other countries... There are in your laws of the consumer that Apple must meet the provisions of warranty... And 14 duration of life is not good enough.

  There are many problems with the current series of AE and TC.

  Constantly wireless of does not... power outages of power.

  My first TC was like yours... not quite DOA, but it was defective out of the box and lasted a week total.

  Secondly, one was poor wireless. My oldest Gen5 AE and Gen4 TC have been much faster.

  Third go was very well. (At least on this point).

  If you want something better watch the top selections here. You will find the AE list... a long long way down.

  http://www.SmallNetBuilder.com/tools/charts/router/bar/113-5-GHz-DN-c

• HP4530s: HP4530s - time to change the thermal paste

  Hi all

  can you please help me to decide if now is the time to change the thermal paste on my processor on laptop HP 4530 s. I have this laptop for almost 5 years now and lately I noticed significant overheting. Of course, the fan is always on. Home, take a look at the screenshot of Speedfan application. As you can see Core 0 (I guess that's the CPU and sometimes reaches more than 60 ° C).

  Since the fan was cleaned not so long time ago, I thought I'd give laptop to some experts to disassemble, remove the radiator and change the thermal paste. I've seen many of these videos on you tube.

  I have win 7 pro installed on this laptop and is mostly used for surfing the web, MS office and youtube.

  What is your opinion?

  Thank you!

  Thank you for your help Hüffer. I also found on many places that these temperatures are almost normal. However, given that the laptop is almost five years I decided nevertheless to change thermal past and for cleaning the air in detail.

  Is there not a lot of dust in the fan or heat sink. My firend exchanged thermal paste and after the test, the results are given in the following picture. Core0 temperature never exceeds 50 C. The test is carried out after an hour with the same content to youtube. The lapopt is not really hot on the side left (where are placed HDD and the heatsink) more. I think it was the right thing to do, something like a review.

  

• Why my computer date and time keep changing to 01/01/2003

  I change the date and time of my lap top, according to the laptop for a while and turn on the date and time continue to change to 01/01/2003. I have not so much time to change, but... his problem keeps up to date of the.

  Looks like your laptop CMOS battery needs to be replaced.  It is not the same battery that powers your laptop.  It is usually a battery of lithium-manganese dioxide of small coin shaped that resemble the shows big battery.  You should consult your instructions of the manufacturer on how to access and what type of battery is needed to replace it.

  A simple call to your computer manufacturer should provide all the necessary information.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows time always changes

  Hello

  Lately, I have a problem with my vista sp2. The exact time is 29 March 2013 12:23 AM. Yet, if I stop vista for an hour or more, when I restart the PC time system strangely transformed in March 11, 12:00. I have reset on the exact time, but if I stopped it, it will change again for another time, say 2 agusts 2013 23:00, and so on.

  I if it stops and it reboot after a few minutes, the time is correct.

  Comprehensive analysis of MSE can't find anything.

  I am confused, can someone help me?

  Thank you

  Low battery can keep the date and the time of change of random dates and the times. The information you have provided your motherboard is six years old (and the battery was built before the motherboard), two scanners showed no malware, so I think it's time to replace the battery.

  Jim

• JSP_EXECUTION_FAILED he received for the first time today. What is cause and how this can be fixed?

  JSP_EXECUTION_FAILED

  Message received above for the first time today.  What is cause and how this can be fixed?

  See http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/jspexecutionfailed-on-a-few-sites/20a56957-4abb-4142-b948-70e2a11d2f47?msgId=b899b20b-8f0d-4f3d-9115-61c5b334d08f

• Why every time I change my desktop backgroung, Farmscapes keeps opening game?

  I put my desktop backgroung change every 5 min and when this happens, the agricultural landscape opens instantly. What can I do to make Farmscapes not to open every time I change my office? I have Windows 7.

  Farmscapes (Game)

  I don't know what it is?

  Uninstall or disable if it was a windows game.

  http://www.IRCFAST.com/LV/uninstall/view/kl227015.htm

• I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.

  I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.

  Acrobat 9 is not compatible with the current operating system, which is probably the reason why they don't support you, but they still let you know if your s/n is valid or not... Try to contact them again and ask for this information.

• CC of Lightroom crashed at least twenty times today.

  CC of Lightroom crashed at least twenty times today. She matter a none, some or most of the selected photos, and then crashes... or it crashes before I even hit import. Version is updated: 15-2015. Help! He crashed again when I opened to get the version number.

  Problem has been resolved by the Adobe Customer Service. He seems to have been a problem with the graphics processor.

• Problem installing flash player, tried 5 times today!

  How to solve this problem I installed flash player 5 times today and each time he does say installation complete and the browser opens by saying that everything is good, but then I go to a web site that requires flash player and I get the error message that I need to install flash player.

  Check

  • http://forums.Adobe.com/thread/885448
  • http://forums.Adobe.com/thread/867968

• keep the clock set to my time zone? so he keeps up to date when I'm pc

  I have changed my pc clock new cst but it keeps going to a different time zone when I restart?  is this a defect in toshiba pc? I don't need the updates every time I'm on the pc, so why he keep coming?

  Hi Roberge11,

  This thread can be useful to solve the http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/date-and-time-change-at-vista-home-premium-boot-up/9444379a-dc68-4f98-9f88-5c5b130419b6 problem