Close 'OUTLOOK. Setup EXE error.

Similar Questions

• trl120.bpl/Setup.exe error updating panda internet from 2011 to 2012

  Tried to update my panda internet between t0 and 2011 2012 and I sysytem mechanic.now I have the app missing rtl120.bpl and he says panda has stopped working I tried to re - install panda from the disc, gets most of the setup.exe error then made way. Thanks for reading. (email removed for privacy)

  Hello

  I would like to do you right click on the file setup.exe and run as administrator.

  If this is little help, contact the manufacturer to better aid.

• 0xc0000094 Setup.exe application error occurred in the application at location 0x00498e1b

  Printer HP Photosmart Prem C410a - Windows 7 64 bit - downloaded the driver - after extraction at 99% - the dialog box has disappeared - no niche diaolog appear setup.exe - error - Application error the entire division by zero 0xc0000094 occurred in the application at location 0x00498e1b

  Hello

  Please try following the steps below and check any changes:

  http://support.HP.com/us-en/document/c03030583

  Summary or...

  Launch the installation of the printer,

  Immediately that you will get the error message, run the following patch and check any changes:

  http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error "Setup.exe has encounter a problem and must close" when you uninstall a program.

  Original title: Unistalling a program (Remove)

  I want to uninstall a program but when I click on remove the following pop up messege appears (Setup.exe has encounter a problem and nneeds to close.) We are sorry for

  the inconvenience.
  -----------------------------------------------------------------------------------
  If you were in the middle of something, the information you were working

  at the risk of being lost.
  Please tell this problem to Microsoft.
  We have created an erroe reprt who can send us.
  We wiil treat this report as confidential and anonymous.)

  Can you tell me what I need to do? Because I sent error report and the problem persists.

  Hope your replay at the beginning to my email address: * email address is removed from the privacy *.

  Sincerely

  Armando Cortes Monge

  Hey Armando,.

  We will need details of the program you are trying to uninstall as said by Stefan to help you with the problem.

  Come to the error, here are two ways to fix.

  Method 1:

  Reinstall the program from the installation source, and then Uninstall it. This helped to eliminate many applications successfully.

  Method 2:

  Manually remove the program from the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  After you back up the registry, follow these steps.

  (a) click Start and type regedit.

  (b) click on regedit.

  (c) in the registry editor, find the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

  Each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of installed programs, programs and features.

  (d) to determine which program that represents each key, click the key and discovers the following values in the details on the right pane:

  DisplayName: Data of the value of the DisplayName key is the name listed in Add / Remove programs.

  - and -

  UninstallString: The value of the UninstallString key data the program used to uninstall the program.

  (e) after you identify the registry key that represents the program, right click on the key in the left pane of the registry editor window, and then click Remove.

  (f) click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?

  (g) close the registry editor.

  See if that helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.
  (c) in the registry editor, find the following registry key:

• Acrobat Pro XI installation keeps asking for me to close Outlook.exe

  I tried several times to install Acrobat Pro XI on CC.  I keep getting this error message when it is at 43% installation:

  Acrobat Pro XI Install

  Please close the following applications to continue:

  -Outlook.exe

  I don't have outlook open.  I restarted my computer, checked for erros and bugs, and even tried to install in safe mode.  In safe mode, CC explained that I didn't have any internet connection.  Any suggestions on why it keeps asking for me to close outlook?  I have a lot of space on my hard drive.

  Dell Latitude D630

  Windows 7 Home Premium

  32-bit operating system

  Thank you.

  Hi Ms. Lola B,

  Try once more to install Acrobat, once this message appears. Try launching Task Manager go to the process tab, and then search for Outlook and there is a button on the lower left corner on the tab process called Show this process also click that while searching the outlook process.

• Error d:/setup.exe is not a valid win32 application

  I try to install Age of empires III of my game DVD. his Dungeon, which gives the error of setup.exe is not valid win32 application whenever I click on the Setup file...

  and my OS is windows 7 64 bit and the game I tried to install I guess that its x 32 but not sure... its release in 2005. so can I install the game change my farm or what can be the solution...?

  Hi keshram,

  Age Of Empires III is certainly compatible with Windows 7 64 bit operating system. Click here to check.

  There is an article that can help you solve the problem with the installation. Follow all the steps in the article. Age Of Empires III is also listed.

  Error message when you install Microsoft Games and mapping programs
  http://support.Microsoft.com/kb/258496

  Aziz Nadeem - Microsoft Support

• error 5 command.\s530dxp162usZ\setup.exe running

  Hello, how can we put it right this error "error 5 running command.\s530dxp162usZ\setup.exe" thank you

  Hello, how can we put it right this error "error 5 running command.\s530dxp162usZ\setup.exe" thank you

  error 5 is a normal indication do not run under the administrator account or account admin privilege

• Error by running Setup.exe in the installation of MS - SQL 2008

  Hello I need to install MS SQL2008 but I am unable to run setup.exe in my system.

  The error was the installation of the .NET framework 3.5 service pack 1 has failed, and SQL Server 2008 requires .NET framework3.5SP1 should be installed.
  But I installed the .NET framework 3.5SP1. How can I solve this problem...?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads

• TurboTax cd installation problem... Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Maybe a cd damaged?

  Hello

  ·         What is the service pack installed on your computer?

  There are changes that the CD is damaged. You can copy the file to install it on the computer and then try to install the application, and check.

  To install TurboTax, the condition of basic system for Windows is:

  Minimum system requirements

  Processor: 1 GHz 32-bit (x 86) or faster processor

  Operating systems:

  Windows XP (32-bit) Home edition or professional with Service Pack 3 or higher; or

  Windows Vista (32 - bit and 64 - bit) Home Basic/Home Premium/Professional/ultimate; or

  Windows 7 (32-bit and 64-bit).

  Administrator rights required to install and use TurboTax.

  RAM: 512 MB RAM (1 GB recommended)

  Hard drive space *.

  * Must be on the same drive that TurboTax is installed on

  ·         Federal products: 500 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  ·         Products from the States: 15 MB

  ·         Federal more State products: 515 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  Reader of CD-ROM: 2 X CD-ROM drive

  Monitor: recommended 800 × 600 resolution (1024 × 768) screen

  Internet access (required):

  Modem 56 Kbps (connection broadband recommended)

  Other software:

  ·         Microsoft .NET 4 (included with TurboTax Installer)

  ·         Adobe Reader 8 +.

  Printer: Windows compatible ink jet or laser printer

  Hope this information is useful.

• error 2753.setup.exe

  I am trying to install a software on my PC under Windows XP Pro with service pack 3.

  At halfway through the installation, I get "error internal 2753.setup.exe.

  Any suggestions on how to fix this?

  This simple fix is sometimes enough to solve this problem.  If all goes well, it will solve your problem.

• Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

  Original title: error Ordinal 62
  I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

  Hello

   

  You can try the following steps and check.

   

  Method 1:

  Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

  The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

  If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also check the following thread link and check.

  WARNING 62 Ordinal not found in cscdll.dll

• Uninstall Napster - error saying setup.exe has stopped working

  Try to uninstall Napster found on my computer, but get the error message saying setup.exe has stopped working. Please help get rid of Napster!

  Hello

  Follow the steps in the link given below and check if that helps.

  http://support.Microsoft.com/kb/2438651

  If the steps above did not help, I suggest you to install the program and then try to reinstall and check if that helps.

  Hope it will be useful.

• Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7

  Original title: Windows problem of dimming.
  Problem: impossible to up grade windows vista to windows 7
  Error message (roughly): start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows.
  Description: actually I have windows 7 genuine DVD which can start the installer to start. but I can't find anyway to install windows 7. I tried what windows error msg says.
  Help.
                                        

  Hi laadpiyush,

  1. which version of Windows Vista is installed on the system?

  2. which edition of Windows 7 you are trying to upgrade?

  3 - is 32-bit or 64-bit?

  Step 1:

  You can first check the upgrade paths to perform an Update Installation of Windows 7.

  Links:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Step 2:

  Before upgrading to windows 7, you can try the following steps and start the upgrade installation.

  A. back up all important data on the system.

  Run the Upgrade Advisor

  See the link to download and run the Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Software c. Security uninstall and reinstall after upgrade Installation.

  D. sign off all external devices connected (except keyboard and mouse) and start the installation.

  For more information on the Upgrade Installation, see the links:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6719ae72-7187-45CD-80f7-55e66f3ec686

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.